IisProxy Error

After Configured IisProxy for SAP EP 6 SP 6 I am getting following error.
Testing: http://localhost/irj
Error: The page cannot be found
HTTP Error 404 - File or directory not found.
Internet Information Services (IIS)
XML File:
<ISAPI-config version="1.6">
<filter name="IisProxy filter" authentication="forward" />
<extension name="IisProxy extension" />
<mapping name="IisProxy samples" log-level="0">
 <source>
 <protocol>http</protocol>
 <prefix>/irj/</prefix>
 </source>
 <source>
 <protocol>http</protocol>
 <prefix>/irj/</prefix>
 <new-prefix>/irj/</new-prefix>
 </source>
 <source>
 <protocol>http</protocol>
 <prefix>/portal/</prefix>
 <new-prefix>/irj/</new-prefix>
 </source>
 <source>
 <protocol>http</protocol>
 <prefix>/logon/</prefix>
 </source>
 <target>
 <protocol>http</protocol>
 <host>localhost</host>
 <port>50000</port>
 </target>
 <compress-types>text/html, text/plain</compress-types>
</mapping>
</ISAPI-config>
Can anybody help.
Thanks in advance,
Mahesh

In your source, you have set the prefix to /irj/. If you change it to /irj it will work.
Note - IISProxy is no longer supported, SPNegro should be used instead.
Paul

Similar Messages

Iisforward iisproxy error

Hi,
I have installed and configured the iisforward/iisproxy plugin with IIS 6.0 + WLS 8.1 SP5.
iisproxy.ini [CONTENT]:
WebLogicHost=10.20.140.34
WebLogicPort=8010
Debug=ON
DebugConfigInfo=ON
WlForwardPath=/portal
I tried to load the page but nothing happens..just an error page from IE.
wlproxy.log [CONTENT]:
Mon May 28 15:22:49 2007 loadFile(): Properties loaded from \\?\C:\bea\weblogic81\server\bin\iisproxy.ini
Mon May 28 15:22:49 2007 init: created a new server node: id='10.20.140.34:8010'
Mon May 28 15:22:49 2007
================New Request: [portal/console.wlforward] =================
Mon May 28 15:22:49 2007 SSL is not being used
Mon May 28 15:22:49 2007 resolveRequest: wlforward: /portal/console
Mon May 28 15:22:49 2007 Mon May 28 15:22:49 2007 timer thread starting
URI is /portal/console, len=15
Mon May 28 15:22:49 2007 Request URI = [portal/console]
Mon May 28 15:22:49 2007 attempt #0 out of a max of 5
Mon May 28 15:22:49 2007 Trying a pooled connection for '10.20.140.34/8010/8010'
Mon May 28 15:22:49 2007 getPooledConn: No more connections in the pool for Host[10.20.140.34] Port[8010] SecurePort[8010]
Mon May 28 15:22:49 2007 general list: trying connect to '10.20.140.34'/8010/8010 at line 1265 for '/portal/console'
Mon May 28 15:22:49 2007 INFO: New NON-SSL URL
Mon May 28 15:22:49 2007 Connect returns -1, and error no set to 10035, msg 'Unknown error'
Mon May 28 15:22:49 2007 EINPROGRESS in connect() - selecting
Mon May 28 15:22:49 2007 Local Port of the socket is 1283
Mon May 28 15:22:49 2007 Remote Host 10.20.140.34 Remote Port 8010
Mon May 28 15:22:49 2007 general list: created a new connection to '10.20.140.34'/8010 for '/portal/console', Local port: 1283
Mon May 28 15:22:49 2007 WLS info in sendRequest: 10.20.140.34:8010 recycled? 0
Mon May 28 15:22:49 2007 URL::parseHeaders: StatusLine set to [200 OK]
Mon May 28 15:22:49 2007 parsed all headers OK
Mon May 28 15:22:49 2007 sendResponse() : uref->getStatus() = '200'
Mon May 28 15:22:49 2007 for 10.20.140.34/8010/8010, updating JVMID: 336430126
Mon May 28 15:22:49 2007 Going to send headers to the client. Status :200 OK
Mon May 28 15:22:49 2007 *******Exception type [WRITE_ERROR_TO_CLIENT] raised at line 1545 of .\iisproxy.cpp
Mon May 28 15:22:49 2007 NOT failing over after sendResponse() exception: idempotent=1 pastFailover=1
Mon May 28 15:22:49 2007 request [portal/console] did NOT process successfully ..................
Anyone can help me?
[]'s
Emerson Santos

In your source, you have set the prefix to /irj/. If you change it to /irj it will work.
Note - IISProxy is no longer supported, SPNegro should be used instead.
Paul

Iisproxy error page

hi there,
 i tried to locate a jsp with the weblogic server down hoping to hit the error page.
 the URL was http://jason/scripts/CR/login.jsp
 the error page setting is http://jason/WeblogicDown.html
 however, when it came back, the URL become
 http://jason/scripts/CR"http://jason/WeblogicDown.html"
 anyone has any idea?


Hey Michael,
I am akshay (prashant's colleague) and i will continue
this converstion about iis proxy.
We are using W2k and this problem is really random. We
have not found any error on the console as well.
i hope this help you to help me
akshay
"Michael Young" <[email protected]> wrote in message
news:[email protected]..
Hi.
Hmm. What platform are you running IIS on? NT? W2k?
can you characterise this problem a bit more? Is it really random? ordoes it
only occur under heavy load? Does the wlproxy.log file show any errors?Is
there a corresponding error in the weblogic.log file when this happens?
Thanks
Michael
Prashant S wrote:
Hi,
I'm using iis to forwars all the requests for jsp pages to weblogic
server.All the static html pages are hosted on the IIS.However i'm
occasionally getting the error mentioned below.This error is visible at
the
top web page. My iisproxy.ini file is
WebLogicHost=127.0.0.1
WebLogicPort=7001
ConnectTimeoutSecs=300
ConnectRetrySecs=5
Debug=ON
Build date/time: Nov 8 2001 HTTP/1.1 200 Server: Microsoft-IIS/5.0 Date:
Tue, 23 Apr 2002
04:49:30 GMT Connection: close Date: Tue, 23 Apr 2002 04:49:30 GMTServer:
WebLogic WebLogic
Server 6.1 SP2 12/18/2001 11:13:46 #154529 Content-Type: text/html
Any clues to solve this problem.
Prashant--
Michael Young
Developer Relations Engineer
BEA Support

IisProxy Error 404

After Configured IisProxy for SAP EP 6 SP 6 I am getting following error.
Testing: http://localhost/irj
Error: The page cannot be found
HTTP Error 404 - File or directory not found.
Internet Information Services (IIS)
XML File:
<ISAPI-config version="1.6">
<filter name="IisProxy filter" authentication="forward" />
<extension name="IisProxy extension" />
<mapping name="IisProxy samples" log-level="0">
<source>
<protocol>http</protocol>
<prefix>/irj/</prefix>
</source>
<source>
<protocol>http</protocol>
<prefix>/irj/</prefix>
<new-prefix>/irj/</new-prefix>
</source>
<source>
<protocol>http</protocol>
<prefix>/portal/</prefix>
<new-prefix>/irj/</new-prefix>
</source>
<source>
<protocol>http</protocol>
<prefix>/logon/</prefix>
</source>
<target>
<protocol>http</protocol>
<host>localhost</host>
<port>50000</port>
</target>
<compress-types>text/html, text/plain</compress-types>
</mapping>
</ISAPI-config>
Can anybody help.
Thanks in advance,
Mahesh

Yes i have added the ISAPI filter...
IISProxy Log file:
================================================================================
13:59:30 Global F-Init IisProxy Filter 1.6.2.0 initializing.
13:59:30 Global F-Init IisProxy Filter 1.6.2.0 initialized.
13:59:30 Filter Config IisProxy Filter configuration:
================================================================================
Filter configuration
log-level = "1"
log-flags = "0x00111330"
debug-flags = "0x00000000"
priority = "high"
extension-url = "/scripts/IisProxy.dll"
IIS-check-auth = "true"
forward-auth = "true"
remote-ip-forward = "false"
log-path = "C:\Inetpub\Scripts\IisProxy_%y%m%d.log"
Source mappings:
 Source http://localhost:(any)/irj/
 mapping = 0 "IisProxy samples"
 Source http://localhost:(any)/irj/
 mapping = 0 "IisProxy samples"
 with /irj/ -> /irj/
 Source http://localhost:(any)/portal/
 mapping = 0 "IisProxy samples"
 with /portal/ -> /irj/
 Source http://localhost:(any)/logon/
 mapping = 0 "IisProxy samples"

'Edit Locally' command Error -- IISProxy?

Hi,
We have a problem with 'Edit Locally' command since we are using Windows Authentication. Our architecture is:
SAP EP 6.0 SP2 Patch 28 (Solaris)
IIS Proxy (Windows 2003)
The situation is:
If we access to SAP Portal using old url (directly to Solaris) using form-based authentication we do not have any problem with 'edit locally' command.
However, if we access to SAP Portal using IISProxy and Windows Authentication we get an 'Operation failed' error message.
     Java plug-in console shows the following message:
cargar: clase com/sapportals/wcm/app/docapplet/DocApplet.class no encontrada.
java.lang.ClassNotFoundException: com.sapportals.wcm.app.docapplet.DocApplet.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Where is the problem? Is due to authentication method? SAP Portal or IISProxy configuration?
Thanks,
Damiá

I'm having the same problem. Did you solved it?
Thanks!

IisProxy HTTPS Error

Hi all, I've setup the IisProxy to work as an intermediate HTTPS server to our WAS 6.40 J2EE Server.
When we try to access the portal HTTPS we receive the following error:
IisProxy.dll: 500 Internal Server Error
+ProxyWorker(): IOException: SapSSLSessionInit() failed: -6 (SSSLERR_INIT_FIRST)
at SapConnection.cpp:659+
We already check permission in *.pse files and folder. Also restart services in both servers.
¿Does anybody have any clue? Really appreciate your comments !!!
Regards,
Manuel .-

Hi Oliver,
All you have to do is:
1. Generate the *.csr in the WAS and sign it by a CA.
2. Import the resultant *.cer in the WAS
3. Import this *.cer in the PSE files
This means that the WAS and the PSE files in the Web Server need to have the same *.cer file in order to avoid the MISMATCH error.
Please let me know if you need a detailed procedure.
Regards,
Manuel Bernal

IISProxy.dll error

This is the set up we have currently.
 Nt 4.0 server with IIS 4.0. I have followed the WebLogic 5.1 documentation
 and made the root web executable then mapped the extensions .jsp and .jhtml
 to c:\weblogic\iisproxy.dll.
 I have the iisproxy.ini in the c:\weblogic directory and it is a direct copy
 out of the documentation. We are getting an http 500 internal server error.
 When you hit refresh you get a %1 is no a valid windows nt application.
 I believe this problem is isolated to the IIS server.
 I had a sniffer on the network and at no time do I see any traffic from the
 IIS server to the Weblogic server. If I hit the Weblogic server explicitly
 it will server jsp pages.
 -Jess-


The problem was a corrupted dll. Vinod was great in sending me a debug dll
 and it starting working. Once a fresh copy of the current dll was abtained
 and installed the servers are now talking.
 Thanks for all your help Vinod.
 -Jess-
 "Jesse Martinez" <[email protected]> wrote in message
 news:396ccc85$[email protected]..
 > This is the set up we have currently.
 >
 > Nt 4.0 server with IIS 4.0. I have followed the WebLogic 5.1 documentation
 > and made the root web executable then mapped the extensions .jsp and
 .jhtml
 > to c:\weblogic\iisproxy.dll.
 >
 > I have the iisproxy.ini in the c:\weblogic directory and it is a direct
 copy
 > out of the documentation. We are getting an http 500 internal server
 error.
 > When you hit refresh you get a %1 is no a valid windows nt application.
 >
 > I believe this problem is isolated to the IIS server.
 >
 > I had a sniffer on the network and at no time do I see any traffic from
 the
 > IIS server to the Weblogic server. If I hit the Weblogic server explicitly
 > it will server jsp pages.
 >
 > -Jess-
 >
 >
 >

Http 404 error with IISProxy

Hi
We have a production portalenvironment with SAP EP 6.40, NW04 SPS19 (Win2003 server), we use iisproxy as reverse proxy. We have also a test environment that is exact the same and would like to setup IISproxy (reverse) here as well. But we only get the "Page cannot be found" message.
It does the redirection but doesnt display any content. The testenvironment is run on VMWare if that has anything to do with it.
This is the .xml file:
<ISAPI-config version="1.6">
 <filter name="IisProxy filter" />
 <extension name="IisProxy extension" />
 <mapping name="Test Portal">
 <source>
 <protocol>http</protocol>
 <prefix>/irj/</prefix>
 </source>
 <source>
 <protocol>http</protocol>
 <prefix>/logon/</prefix>
 </source>
 <target>
 <protocol>http</protocol>
 <host>servername.com</host>
 <port>50000</port>
 </target>
 <compress-types></compress-types>
 </mapping>
 <config>
 <source>
 <protocol>http</protocol>
 <host>localhost</host>
 <prefix>/IisProxy/</prefix>
 </source>
 </config>
</ISAPI-config>
And here is a piece from the log:
================================================================================
08:39:30 Filter IIS - GET /
08:39:32 Filter J2EE --> GET /irj/portal/anonymous
10:29:23 Global F-Init IisProxy Filter 1.6.2.0 initializing.
10:29:24 Global F-Init IisProxy Filter 1.6.2.0 initialized.
10:29:24 Filter Config IisProxy Filter configuration:
================================================================================
Filter configuration
log-level = "3"
log-flags = "0x8031F33E"
debug-flags = "0x00000000"
priority = "high"
extension-url = "/scripts/IisProxy.dll"
IIS-check-auth = "true"
forward-auth = "false"
remote-ip-forward = "false"
log-path = "C:\Inetpub\Scripts\IisProxy_%y%m%d.log"
Source mappings:
 Source http://(any):(any)/irj/
 mapping = 0 "SAP Enterprise Portal 6.0"
 Source http://(any):(any)/logon/
 mapping = 0 "SAP Enterprise Portal 6.0"
 Source http://localhost:(any)/IisProxy/
 mapping = -1 "IisProxy module configuration (internal)"
================================================================================
10:29:24 Filter IIS - GET /
10:29:24 Filter J2EE --> GET /irj/portal/anonymous
10:30:49 Filter J2EE --> GET /irj/portal/anonymous
11:17:12 Global F-Init IisProxy Filter 1.6.2.0 initializing.
11:17:12 Global F-Init IisProxy Filter 1.6.2.0 initialized.
11:17:12 Filter Config IisProxy Filter configuration:
================================================================================
Filter configuration
log-level = "3"
log-flags = "0x8031F33E"
debug-flags = "0x00000000"
priority = "high"
extension-url = "/scripts/IisProxy.dll"
IIS-check-auth = "true"
forward-auth = "false"
remote-ip-forward = "false"
log-path = "C:\Inetpub\Scripts\IisProxy_%y%m%d.log"
Source mappings:
 Source http://(any):(any)/irj/
 mapping = 0 "SAP Enterprise Portal 6.0"
 Source http://(any):(any)/logon/
 mapping = 0 "SAP Enterprise Portal 6.0"
 Source http://localhost:(any)/IisProxy/
 mapping = -1 "IisProxy module configuration (internal)"
================================================================================
11:17:12 Filter IIS - GET /iisproxy
11:23:55 Filter IIS - GET /IisProxy
11:24:57 Filter J2EE --> GET /irj/portal/anonymous
11:25:01 Filter IIS - GET /
11:25:01 Filter J2EE --> GET /irj/portal/anonymous
11:41:31 Filter IIS - GET /iisproxy
11:42:03 Filter IIS - GET /IisProxy
13:25:42 Global F-Init IisProxy Filter 1.6.2.0 initializing.
13:25:42 Global F-Init IisProxy Filter 1.6.2.0 initialized.
13:25:42 Filter Config IisProxy Filter configuration:
============================================================================
ANY help or idea on why we get "Page cannot be found" would be most appriciated.
/thanks in advance, Camilla

Hi Camilla,
you are trying to access the portal via /irj/portal/anonymous. What happens if you just try to access it via /irj/? Do you still get the page not found?
Since you are using IISProxy be sure to know Note 886214 - End of Maintenance of IisProxy ISAPI module.
The IIS Proxy Module is no longer supported by SAP and has been replaced by other means of SSO (like SPNego).
However, there are still some notes out there which might be useful:
For Windows 2003/IIS 6 Note 715303 - IIS 6 specific configurations for IisProxy module
Note 713568 - Troubleshooting IisProxy module
Note 629946 - IisProxy: Manual installation and update
Hope this helps,
Holger.

Problem with 'Edit Locally' command -- Due to IISProxy?

Hi,
We have a problem with 'Edit Locally' command since we are using Windows Authentication. Our architecture is:
SAP EP 6.0 SP2 Patch 28 (Solaris)
IIS Proxy (Windows 2003)
The situation is:
If we access to SAP Portal using old url (directly to Solaris) using form-based authentication we do not have any problem with 'edit locally' command.
However, if we access to SAP Portal using IISProxy and Windows Authentication we get an 'Operation failed' error message.
     Java plug-in console shows the following message:
cargar: clase com/sapportals/wcm/app/docapplet/DocApplet.class no encontrada.
java.lang.ClassNotFoundException: com.sapportals.wcm.app.docapplet.DocApplet.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Where is the problem? Is due to authentication method? SAP Portal or IISProxy configuration?
Thanks,

Thanks for your comment,
Now, we have tested with version 1.5.0_01 plugin version but the result is the same: 'Operation failed'
This is a very important topic to solve before installing Windows Authentication in a productive environment.
Has anybody any solution?
Damiá

WL 5.1 and IIS - HTTP Error 403 - Access Forbidden problems

I'm trying to hook IIS up to the evaluation version of WebLogic Server 5.1
that I installed...
I followed the instructions that I found on the Installing the Microsoft-IIS
(proxy) plug-in page. I then copied HelloWorld.jsp into the
d:\weblogic\myserver\public_html directory, and tried to bring it up in a
browser by typing in localhost/HelloWorld.jsp. At this point, I got the
following error:
** Begin error message **
HTTP Error 403
403.1 Forbidden: Execute Access Forbidden
This error can be caused if you try to execute a CGI, ISAPI, or other
executable program from a directory that does not allow programs to be
executed.
Please contact the Web server's administrator if the problem persists.
** End error message **
I then tried adding a virtual directory called public_html to my default Web
site. This didn't help. I even tried creating a directory called public_html
inside public_html, setting execute privilages on it, and putting a copy of
HelloWorld.jsp in there. This allowed me to type
localhost/public_html/HelloWorld.jsp into my browser, and to see the JSP
source code!?#...
This is what my iisproxy.ini file looks like (It lives in d:\weblogic):
** Begin iisproxy.ini **
# This file contains initialization name/value pairs
# for the IIS/WebLogic plug-in.
WebLogicHost=localhost
WebLogicPort=7001
WebLogicCluster=
ConnectTimeoutSecs=20
ConnectRetrySecs=2
** End iisproxy.ini **
Any suggestions/help from someone who's done this before would be greatly
appreciated. We can't run/evaluate the product before we can crawl and walk.
Cheers...
Dave Bruzzone
WebCredenza, Inc.

Thr problem is that you must set Execute rights to the IIS web at the
Configuration settings (exactly as seen in the documentation).
"Davide Bruzzone" <[email protected]> ha scritto nel messaggio
news:8iubob$mgp$[email protected]..
I'm trying to hook IIS up to the evaluation version of WebLogic Server 5.1
that I installed...
I followed the instructions that I found on the Installing theMicrosoft-IIS
(proxy) plug-in page. I then copied HelloWorld.jsp into the
d:\weblogic\myserver\public_html directory, and tried to bring it up in a
browser by typing in localhost/HelloWorld.jsp. At this point, I got the
following error:
** Begin error message **
HTTP Error 403
403.1 Forbidden: Execute Access Forbidden
This error can be caused if you try to execute a CGI, ISAPI, or other
executable program from a directory that does not allow programs to be
executed.
Please contact the Web server's administrator if the problem persists.
** End error message **
I then tried adding a virtual directory called public_html to my defaultWeb
site. This didn't help. I even tried creating a directory calledpublic_html
inside public_html, setting execute privilages on it, and putting a copyof
HelloWorld.jsp in there. This allowed me to type
localhost/public_html/HelloWorld.jsp into my browser, and to see the JSP
source code!?#...
This is what my iisproxy.ini file looks like (It lives in d:\weblogic):
** Begin iisproxy.ini **
# This file contains initialization name/value pairs
# for the IIS/WebLogic plug-in.
WebLogicHost=localhost
WebLogicPort=7001
WebLogicCluster=
ConnectTimeoutSecs=20
ConnectRetrySecs=2
** End iisproxy.ini **
Any suggestions/help from someone who's done this before would be greatly
appreciated. We can't run/evaluate the product before we can crawl andwalk.
>
Cheers...
Dave Bruzzone
WebCredenza, Inc.
[isapi2.gif]

HTTP Error 403.1

I am following a flash from to database via asp tutorial.
When I try to test the asp code in the browser I get this message.
"You have attempted to execute a CGI, ISAPI, or other
executable program from a directory that does not allow programs to
be executed.
HTTP Error 403.1 - Forbidden: Execute access is denied.
Internet Information Services (IIS)"
I don't get it. I have the execute permissions set to allow
scripts AND executables in IIS.
ANyone know what could be wrong?
To top it off I do have a fully functional html input form to
database and data management pages that work fine in the same
directory. Its just this testing of the flash form.

Thr problem is that you must set Execute rights to the IIS web at the
Configuration settings (exactly as seen in the documentation).
"Davide Bruzzone" <[email protected]> ha scritto nel messaggio
news:8iubob$mgp$[email protected]..
I'm trying to hook IIS up to the evaluation version of WebLogic Server 5.1
that I installed...
I followed the instructions that I found on the Installing theMicrosoft-IIS
(proxy) plug-in page. I then copied HelloWorld.jsp into the
d:\weblogic\myserver\public_html directory, and tried to bring it up in a
browser by typing in localhost/HelloWorld.jsp. At this point, I got the
following error:
** Begin error message **
HTTP Error 403
403.1 Forbidden: Execute Access Forbidden
This error can be caused if you try to execute a CGI, ISAPI, or other
executable program from a directory that does not allow programs to be
executed.
Please contact the Web server's administrator if the problem persists.
** End error message **
I then tried adding a virtual directory called public_html to my defaultWeb
site. This didn't help. I even tried creating a directory calledpublic_html
inside public_html, setting execute privilages on it, and putting a copyof
HelloWorld.jsp in there. This allowed me to type
localhost/public_html/HelloWorld.jsp into my browser, and to see the JSP
source code!?#...
This is what my iisproxy.ini file looks like (It lives in d:\weblogic):
** Begin iisproxy.ini **
# This file contains initialization name/value pairs
# for the IIS/WebLogic plug-in.
WebLogicHost=localhost
WebLogicPort=7001
WebLogicCluster=
ConnectTimeoutSecs=20
ConnectRetrySecs=2
** End iisproxy.ini **
Any suggestions/help from someone who's done this before would be greatly
appreciated. We can't run/evaluate the product before we can crawl andwalk.
>
Cheers...
Dave Bruzzone
WebCredenza, Inc.
[isapi2.gif]

Error when requesting JSP page

We have just finished getting our environment set up. We are running
WebLogic 4.5.1 sp7 on a Sun server, and are frontending it with IIS 4.0
SP6a using the iisproxy.dll WebLogic plugin.
We can get things working for a while, but eventually, we get the
following error in the NT event log when requesting the first JSP on our
site:
"Out of process application '/LM/W3SVC/1/Root' terminated unexpectedly"
The Web server is still up, it's just when the JSP page is called that
we get "Page can not be displayed" errors. Any HTML pages come up just
fine. To fix the problem, we just stop and restart the Web Publishing
service.
Has anyone seen this error or does anyone know what events cause this
problem?
Thanks,
-Mike

There is a big difference between this;
http://www.mydomain.com/blabla
and this;
http://www.mydomain.com/blah.jsp
blabla - this is the name of the Web application. When you reference this Web application name Tomcat will check the welcom file descriptor and redirect for that web application.
blah.jsp - is the name of a JSP page. When you reference this page the way you did above, you are not stating where the JSP page is located. It would be locatied in the "http://www.mydomain.com/blabla/blah.jsp" location.

IIsproxy, PDF files and IE60 as a browser

We set up the IISproxy (1.6)for our EP 60 SP9. Everything works fine except when we try to open some PDF files. After some time we get the error "The file is damaged and could not be repaired". This error only occurs for some PDF's, independent of its size.
When we access through SAP Web Server we do not get any problem to open those files.
All laptops and desktop have MS IE 6.0 (6.0.2900.2180.xpsp_sp2_rtm.04083_2158) as official browser. When we try with other browser like firefox there is no problem at all.
Any hint or help?
Thanks in advance
Antonio

Hi
We had similar issue with some PDFs on EP. For us, we used embedded iViews/HTML which renders PDFs. The problem is that embedded HTML with PDF does not work properly if you have fastwebaccess feature in the PDF.
You will have to recreate/reprint/re-author the PDF without the fastwebaccess feature using Adobe.
Thanks and regards
Kwong Tat

IIsProxy version for windows authentication

We are in the process of installing windows authentication to our EP 6.0 portal. We are running on SP 11 J2EE with portal SP 11 patch 3.
The first question I have in document Using Header variables or Integrated Windows Authentication section Installing the IIsProxy module says for security reasons we need to install version 1.7.0.0. Was this version released, we cannot find it on the service market place?
My second question, when we use version IISPROXY16_2-10001433.SAR the authentication mechanism works fine to the portal but I cannot navigate within the portal, it looks like the screen get stuck on the first Iview no matter what role you choose. When we use version IISPROXY15_0-10001969.SAR things work fine. I increased the trace while using IISProxy 16.2 but there were no errors in the logs. We would like to be on the latest version. Any idea what might be the problem?
Thanks for your help,
Mike Fasheh

Hi folks !
I have made this configuration a couple of times without problems (other iisproxy version), but for some reason this time is not working and Im totally desesperated =(
Scenario:
- 1st server, win 2003, iis 6.0: Iisproxy 1.6.2 installed, it forwards the requests correctly
- 2st. server, ibm with aix, sap ep 6.0 sp12. Configurations made for NT authentication.
The problem:
For some reason the virtual directories defined in IisProxy.xml file are not taking the IIS Security Settings (Integrated Windows Authenticated). The iisproxy is just forwarding the request, but the IIS is not making the NT authentication.
If I change the name of the virtual directory in the IisProxy.xml file (put any name). In this case, IIS applies the security settings correctly.
Any clue about this ?
Thanks a lot for your help !!!!!!
Regards from Mexico,
Diego

Basic Authentication with IISProxy?

hi,
is the IISProxy the appropriate tool for tunneling http-requests to http-servers behind a firewall (reverse proxy)?
i made it work with ep60. but accessing other http-servers with own mappings (for example /tomcat/ directs to a tomcat server) fails.
problems I'm facing:
1. basic authentication is not transmitted to the http-server (e.g. tomcat). the logon-box pops up, but the data doesn't seem to be transmitted through IIsProxy.
2. URLs created from other servers don't know that the IISProxy requires a special filter-string (again /tomcat/) when they create absolute links.
are there other / better reverse proxys (apache?) that can handle these things?
kr, achim
ps: what about the filter-element attributes authentication="normal" remote-address="skip"?
i haven't found any documentation about them, but they look like to be configured...
Message was edited by: Achim Hauck

After checking some more I was wrong (I got it confused with a Sap logon ticket plugin)
But in note 480520 it is described how to setup reverse proxy with apache. There is an attached document to the note which explains it.
Text of the note:
Symptom
How to integrate SAP J2EE Engine 6.20 with Apache Webserver
Reason and Prerequisites
SAP J2EE Engine 6.20 can be integrated with Apache Web Server,no plugin is needed. The same is valid for SAPJ2EE 610 or In-Q-My 427.
Solution
General Information on how to use the Apache Webserver in combination with the SAP J2EE Web Application Server :
1. You are permitted to use the Apache Webserver together with the SAP J2EE Web Application Server. In this way SAP guarantees continued support for the SAP Application.
2. Due to the high number of possible configurations and versions available, SAP can only provide some examples of possible configurations. These normally suffice to use the SAP Application.
3. You might need to contact consultants specialized in this area for error analysis and further configurations.
This consultation is not provided by SAP Support.SAP J2EE Engine (and its predecessor In-Q-My Application Server) can be integrated with Apache web server, no plugin is needed.
Please review the attached Configuration Guide in order to get some configuration examples using Reverse Proxy and/or URL Rewriting.
Btw, the major benefit of using IIS and IISproxy is that Integrated windows authentication is possible (SSO from OS)
Great idea to make a blog out of this.

IisProxy Error

Similar Messages

Maybe you are looking for