Im having trouble restoring my MacBook Pro, "Comand" and R does not seem to be working for me.
Everytime i try to restore it, it opens normaly to log it with a pop up window saying my start up disc is full. When i log in, my desk top is missing along with my personal wallpaper. Cant seem to do anything when i log in and i really need my comouter for work, someone please help. Just want to restore it.
1. System Preference > Sound > Output
"Settings for the selected device"
Is the pointer for "Balance" set in the middle?
2. Try to push the headphone a bit more into the port.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC. http://support.apple.com/kb/HT3964
5. If any of these steps does not help, contact Apple.
Best.
Similar Messages
-
I bought my daughter a new MacbookPro 13" for grad school and selected the HP Envy 100 printer from the Apple Store website. When I just tried to install the printer, it said that that the software was not compatable with Lion. Any suggestions as to how to get it to work?
Sorry, but the response just takes you to the HP site which is of all possible assistance short of actual help!!
HP (and Apple?) need to fess up and tell all the people who have HP printers when they will "just work" with their machines and OS X Lion.... because for many of us, they just don't! It isn't rocket science guys.... blithely telling us that downloading S/W updates from Apple doesn't help.... because they don't solve the problems! -
Im having trouble getting my macbook pro to boot up after a fail safe boot, im getting as far as the grey screen with the apple loggo. so im trying to run a disk repair but is saying the disk is locked, how do i unlock disk??
Some clarification may help.
You say you cannot boot normally. It shows a gray screen with the Apple logo.
Did you say it will boot successfully in Safe Mode (boot, then hold down the Shift key)?
How did you boot the machine to run Disk Utility? (Which keyboard combinations)? -
I'm having trouble with my macbook pro, I have only had it for three months, when I plugged a camera sd card into the sd slot it isn't appearing anywhere on the computer and i can not access my photographs. can somebody please help me?
Shootist007 wrote:
Clifton I must disagree with you on the above statement. It is my opinion and experience that you should never connect the camera directly to any computer, Mac Windows Whatever.
It is always best to Remove the memory card from the camera and put it in a card reader, whether an external reader or one built into the computer, to copy images from the card.
Hi Shootist. I would be interested in hearing some reasoning on this. I almost always use a USB cable to connect my camera to the MBP for transferring pictures, and have moved about 30,000 this way over the last 6 years since my photography went digital. Recently, on the rare occassions when I have only a few to transfer and I was too lazy to go for the cable, I have used the card reader; about half those times I have difficulty getting the MBP to recognise the card. I find I have to press the card very hard into the slot for it to be recognised.
My rationale is quite possibly wrong, but I feel that the USB connectors are more robust and hard-wearing than the flimsy connectors on an SD card. Also, I haven't measured it, but I think the data transfer is faster with the cable. (I just came across this test, which reports noticeably faster transfer for cable than built-in card reader, but the computer was a PC)
Chiara, sorry for hijacking your thread. -
I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem
i try to download now, do you think when i download and install the windows support software, can i fix the problem?
-
Can I move my iWeb from mac-mini to my new macbook pro ? iLife 11 does not have iWeb and I really want to use it to update my website on my new macbook Pro instead of Mac mini
There is no license required for iWeb. Just do a Wyodor suggested and you'll be ready to go. If you're running Lion however, consider the following:
In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT -
How do i upload OS x Snow Leopard on my macbook pro 13 if it does not have an optical drive?
how do i upload OS x Snow Leopard on my macbook pro 13 if it does not have an optical drive?
Use an external one.
(112340) -
i'v got the latest macbook pro 13" and it dose not come with the lion os disk so how do i get the boot camp drivers for windows 7 without an os disk
Page 5, step 2, #2, 2nd bullet.
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.7.pdf -
I am getting no sound on my macbook pro. The sound does not play when I plug in headphones either. I have tried making it louder quieter, restarting my computer, HELP!
There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. If your model has an audio-out (headphone) port, and anything is plugged in, unplug it before putting the system to sleep.
3. If you've installed something called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and reboot. You should do that even if the software is not causing the problem, because it's useless.
4. If you've installed an equalizer called "Boom" or anything similar, update or delete it and reboot.
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Reboot and test.
9. Boot in safe mode. Don't log in; just reboot as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
10. Reset the NVRAM.
11. Reset the SMC.
12. Reinstall OS X after backing up all data. For a possible shortcut, see this thread.
13. Make a "Genius" appointment at an Apple Store. -
Very slow, zaberaet all the RAM! I have a Macbook pro retina 8gb it does not pull
Очень медленно работает,заберает всю оперативную память! У меня Макбук про ретина 8 гб его не тянетAgreed! This bug with the ringtone delay (№4.1) is really annoying
-
Hp officejet pro 8100 and it does not print bar codes from UPS or USPS
have an hp officejet pro 8100 and it does not print bar codes from UPS or USPS. Can you please please help? i have used my ipad, by HP G62-355DX Notebook and neither will give me printed bar codes. The balance of the mailing label do print, just not the bar code. It may be my imagination, by I believe it used to print thebar codes.
Hi,
Try adding an alternate driver and try to print.
To use an alternate print driver for HP printers in Windows 7:
1. Click on the Start menu.
2. Click on Devices and Printers.
3. Click Add a Printer
4. Add a local Printer
5. Select Create a New Port
6. Select Standard TCP\IP port
7. Enter Printer IP address (Printer IP address can be found by printing network config page from printer
8. Under Manufacturer select HP and under printer select HP Officejet 8000 pirinter or Officejet 7410
9. Click apply and try printing
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution" -
I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?
Hello farahani hairon nizar,
If your Apple ID was changed from your old account, you may have to change it back to your old account to be able to sign out and then change it back after that is done. Take a look at the article below for more information.
If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/en-us/HT203828
Regards,
-Norm G. -
I updated my macbook with lion and airdrop does not show up in the finder, how could this be?
I updated my macbook with lion and airdrop does not show up in the finder, how could this be?
shldr2thewheel wrote:
If this is the case: How to enable AirDrop over ethernet and AirDrop on unsupported macs running Lion .
http://osxdaily.com/2011/09/16/enable-airdrop-ethernet-and-unsupported-macs/
Interesting. Googling, I see that someone posted that on these discussions as well:
https://discussions.apple.com/thread/3331216?start=0&tstart=0
which mentions what I recall: that Airdrop (as implemented by Apple) would create an on-demand ad-hoc Wi-Fi connection, even if you were already connected to an access point. Normally, you can't connect to multiple Wi-Fi networks, thus the reason for Airdrop only supported on newer Wi-Fi chips.
And Apple's KB:
http://support.apple.com/kb/HT4783 -
Macbook Pro Pinch/Zoom feature does not work with Firefox 6
Can someone please tell me how to fix this major problem?
I can not get the Pinch/Zoom feature on the track pad to work on my Macbook Pro. I am running OS 10.6.8.
I have seen this below in other posts, and have tried it, but it STILL does not work !!!!
'''''Some gestures have been removed in Firefox 4.
'''You can restore the zoom feature by changing the values of the related prefs on the about:config page.
'''browser.gesture.pinch.in -> cmd_fullZoomReduce<br>
'''browser.gesture.pinch.in.shift -> cmd_fullZoomReset<br>'''
'''browser.gesture.pinch.out -> cmd_fullZoomEnlarge<br>'''
'''browser.gesture.pinch.out.shift -> cmd_fullZoomReset<br>''''''
'''To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website.'''
'''If you see a warning then you can confirm that you want to access that page.'''''''''''
Please someone help me - this is a great feature and its really pissing me off that I can't use it.
HELP !!!I'VE TRIED THIS:
browser.gesture.pinch.in -> cmd_fullZoomReduce
browser.gesture.pinch.in.shift -> cmd_fullZoomReset
browser.gesture.pinch.out -> cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift -> cmd_fullZoomReset
browser.gesture.pinch.latched -> false
I'VE TRIED ALL OF THE ABOVE NUMEROUS TIMES AND IT DOES NOT WORK ON MACBOOK PRO AND FIREFOX 6.
CAN ANYBODY HELP? THANKS ♥ -
MacBook Pro with Mavericks OS does not boot
I have old macbook pro 2009. I upgraded the OS to Mavericks some months ago. It was running nicely till yesterday when electricity cut & there is no battery. I tried to restart it again but it does not boot. When I press the power button. It lights up & gives the starting tone, then a progress bar appears it takes about 20 minutes for the progress bar to complete. After the progress bar is completed, the computer shuts down.
I tried to press the option key during boot. I got some options: time machine ... Disk utility. I pressed on Disk utility. Disk was verified, it was ok. I tried to boot from external disc I previously prepared by ccc (carbon copy cloner) but ccc does not appear in the items of Disk utilities. Restore also failed. Now, I am downloading a OS X Mavericks which will take some hours. Would it be helpful or I need to do something else?Hey Hisham Khalaf,
Thanks for the question. I understand that you are experiencing issues with your MacBook Pro booting up. The following resource provides troubleshooting steps for a related symptom, and may lead to a solution for your issue:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Thanks,
Matt M.
Maybe you are looking for
-
Hi Abapers, i'm getting an error while printing a form. error descr.: - Output could not be issued Message no. VL086 Diagnosis An error occurred in the message processing program. Procedure Contact your system administrator Also if I run my smartfrom
-
Hello, I have a folder of backed-up .emlx messages, all of which have the Mail.app icon (looks like a postage stamp). But when I try to import that folder back into my Mail application, I get the error message that no Mac OS X Mail files were found.
-
Hi everybody! In my company want to determine the cost of a sale of services,,, but the material that we use doesn´t manage stock, so i don´t have manner to generate it. Please, can you help me??
-
I can't do anything with my iPod Nano, help urgently!!!
Hi! The other day I was trying to update my iPod nano with the latest iPod software but the program went frozen so I can't do anything. I disconnected the iPod -even when in the iPod window appears the "Do not disconnect"- and I saw that all the song
-
My preferences in Finder Resets every time I open it
Am having some teething trouble with the new Finder application in OSX Lion. Seems to work ok, but I'd like to add some items to the sidebar. Easy enough to do this via preferences, however each time I reopen Finder it has reset the sidebar back to i