Im scrolling a div with a flash scrollbar and it works, almost

I have successfully created a flash scrollbar that controls a
div on my page as opposed to using the standard scrollbar or
coloring the standard scrollbar which only works in IE. All I am
doing is calling "getURL("javascript:jumptoPercent(percent);")
from my flash movie and it scrolls beautifully using that
function I made. I even put in mousewheel support. But there a few
shortcoming so far, and I was hoping someone would have a pointer
or two.
1. The mousewheel doesn't work in firefox, only in IE (havent
tested other browsers yet). Anybody know how to add firefox support
in?
2. The mousewheel only works when the mouse is over the
scrollbar itself. I would love for it to work when the user is over
the div being scrolled as well. I tried giving focus to the
scrollbar when the user mouses over the div with
onMouseOver="window.document.scrollbarSWF.focus();" , but it
doesn't seem to help.
3. If the user is dragging the scroller and the user leaves
the movie area, the movie loses focus and the scrollbar stops (I
dont know that there is much that can be done here). Is there
anyway for the movie to continue tracking the mouse (the drag
tracking) if the user leaves the movie area so it will function as
a normal scrollbar would?
Thanks for any advice on this.
Jon

Interesting....
1) I've not had a problem where the mousewheel doesn't work
in FireFox, but it doesn't work on the Mac in general.
2-3) There's no convenient way around this. Something crazy
you could consider doing is to use Flash 8 and ExternalInterface.
Basically, you could use JavaScript to do all the listening for
mousewheel actions, then report them to Flash via
ExternalInterface. But it might be easier and safer to just put the
whole content area in Flash, or leave it as a normal HTML/Browser
scrollbar, as ugly as they are.

Similar Messages

TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I have a VGA adapter and an iPad2. Tried projecting my iPad2 to projector using the VGA but doesn't work. Tried it with friend's iPad1 and it works. Why??

I have a VGA adapter and an iPad2. Tried projecting my iPad2 to projector using the VGA but doesn't work. Tried it with friend's iPad1 and it works. Why?? Pls help.

Yup - nothing happens. I then took the same VGA cable and plugged it into my friend's iPad1 and it worked perfectly when she opened Keynote. My understanding is that the iPad2 mirrors the entire screen, so no need to go into any specific application in order to project to the screen, right? Do I need to download any specific app or change any settings in order to be able to project the screen using VGA?
Sorry - novice at this. Not very tech minded either...

I bought the company unlocked phone from apple store Canada. It was originally loaded with software 4.2 and was working fine here in SaudiArabia. Yesterday I updated with IOS 5.0.1. Now it is showing that sim is not valid. The same sim works in other p

I bought the company unlocked phone from apple store Canada. It was originally loaded with software 4.2 and was working fine here in SaudiArabia. Yesterday I updated with IOS 5.0.1. Now it is showing that sim is not valid. The same sim works fine in other phones.

Here's and update on my problems and here are are some screen shots of the types of problems I've been having since the v5.0.1 update. Keep in mind these are native apps and I have tried the rebuild phone crap many times, nothing helps.
This is screen shot of a what happened when I tried to use my camera one day, both the front and back cameras were all black. I had to power cycle the phone to get rid of this problem. The cameras appeared to be working correctly, I could focus and zoom but it was all black.
Here is an image of what happened when I searched for something in a map. This is after I picked the choice I wanted, the keyboard disappeared but the list didn't. I had to force close the app and restart it for this problem to go away. Who knew five bars on ATT was possible.
And finally this is the messaging app, although you would not know it. I had to return to home screen (after a long pause for it to process the button push) and return to the messaging app. This happens all the time with the messaging app and the notifications sounds drive me crazy. If i'm using the phone, say browsing the web and I get an incoming message its almost 100% of the time the messaging app will screw up. The sound will play at the wrong time or not at all, message will show up in notifications and diasapear in message app or Ill have a problem like this:

Flash Player w/Windows 7 HomeI can install Flash Player and everything works until I shut computer o

I can install Flash Player and everything works until I shut computer off. When I start it up Player will not work and I have to reinstall it. When it is working in Control Panel under Programs Remove the Player icon is red. When it is not working the icon is in white. Help! Cliff

Pat Willener <[email protected]> wrote:
Pat Willener http://forums.adobe.com/people/pwillener created the discussion
"Re: Flash Player w/Windows 7 HomeI can install Flash Player and everything works until I shut computer o"
To view the discussion, visit: http://forums.adobe.com/message/5360525#5360525

My iPhone 5 doesn't send any text messages or i messages and the problem isn't with the sim card as i tried it with another iPhone 5 and it worked fine.

my iPhone 5 doesn't send any text messages or i messages and the problem isn't with the sim card as i tried it with another iPhone 5 and it worked fine.

OK. Thanks for sharing.
Have a nice day.

I have the latest edition of the Flash player and it works fine with IE but Firefox keeps telling me I can play things because I dont have it

Since I updated Firefox I cant play anything that requires Flash player. I have the up to date player and it works perfectly with IE but Firefox keeps telling me I need another plug in and when I follow the instructions it says 'download failed try manual download' but even that fails too.
Before I updated Firefox I had no issues, can you help
Alan.

There are 2 versions of Adobe Flash:
*an '''ActiveX version''' for IE only
*a '''Plugin version''' for most other browsers including Firefox
*On a Windows system, you should always update both individually.
'''''You do not appear to have the Plugin version for Firefox installed. ''''' If you did, in Add-ons > Plugins you would see "Shockwave Flash ''(version)''". If "Shockwave Flash" is there and is disabled, click the "Enable" button.
Check your Plugins often --> http://www.mozilla.org/en-US/plugincheck/
*only the most popular/used Plugins are known by this page
*page will detect only installed, '''''enabled''''' Plugins
'''Install or update Adobe Flash''' 
#'''Using Firefox''', go to the following link and SAVE the download to your desktop so you can find it later. Un-check any items on that page that you do not want to download (i.e., "McAfee Security Scan Plus":
#*http://get.adobe.com/flashplayer
#When the download is finished, close Firefox (File > Exit '''''OR''''' Firefox button > Exit)
#Click or double-click on the file you just saved to your desktop
#*In the installation window that appears, click the box to the left of "I have read and...." to place a check mark in the box
#*The "Install" button in the lower right corner will now be highlighted, click it.
#*The installation is quick.
#Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
#To update/install the ActiveX version for IE '''''only''''', repeat the process, '''but use IE to go to the above website'''.
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''

How to deal with transparent Flash ? Does WMODE work ?

I'm using LabVIEW 8.5.1 and i have an ActivX object with a flash movie into.
I have a transparent background in my movie and wants it to work in LabVIEW.
There is the methode wmode included in the object. I set it to "transparent" like in a html webpage but i still get a white background.
Does wmode works in LabVIEW ?
Is there an other solution ?
Thank you

It may be that the OP wants the ActiveX control itself to be transparent, so that possible other LabVIEW controls beneath might show through. And I believe the ActiveX control does not support that in any way. Not even fully shure how that would work, but possibly ActiveX allows that option nowadays, but as said I don't think the LabVIEW container supports that.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Apps built with Flex Builder 2 - 3 not compatible with new Flash Players and/or new browsers, FB4 OK

My applications built with Flex Builder 2 and 3 do not start in new versions of Flash Player and/or new browsers when run remotely. I have not been able to test all combinations of FP and browser versions but there is no problem with applications built with Flash Builder 4. Does anyone have info on this?

Hi Dimitar,
Did you close all the browsers (and applications which use
Flash Player) when you install Flex Builder 3 Beta 3 or Flash
Player? You can try manually installing it from <FB install
location>/player/ directory. Here're some
installation/unintallation instructions of Flash Player:
http://labs.adobe.com/wiki/index.php/Flex_3:Release_Notes#Installing_Flex_SDK_3_Beta_3
thanks,
Sharon

Have a gray screen with a flashing folder and no original CDs what can I do.

Can't boot up my mac at all. I have tried using command R and that did nothing for me
I also tried using the command option P R and that did nothing
I do not have the original CDs anymore And my latest backup is from awhile ago
Anyone with an idea I am all ears
Thank you

Gray screen and flashing folder means the firmware can't find the bootable OS volume.
Press and hold the power button down to force a hardware shutdown.
Use a wired or built in keyboard.
Press and hold the option/alt key down, press the power button to start the machine and keep holding the option/alt key.
What should occur if your boot drive is operating is seeing a grey screen with a bunch of icons that represent bootable options.
If nothing, then your drive is either dead or the GUID partition table is messed up, data recovery is possible if the drive is removed from the machine and still works, no encryption naturally.
My computer is not working, is my personal data lost?
If you see just the RecoveryHD partition, then at least the drive works, the MacintoshHD partition's data can be recovered.
Create a data recovery/undelete external boot drive
Reset your Mac
If you see your MacintoshHD then click on it and the arrow below it to boot, then in System Preferences, set the Startup Disk again. If it doesn't hold, try a #2 NVRAM reset and do the same thing again.
..Step by Step to fix your Mac

The expand on Youtube is not working with many Youtube sites and they work on Internet Explorer

On many of the sites on Youtube the expand does not work with Mozilla Firefox 4. I have gone to Internet Explorer and they work there. When I come back from Internet Explorer strange enough the expand on Firefox works. Obviously its picking up programming from Internet Explorer, unfortunately it does not last long. I've tried plug ins, reloading flash player after I deleted it and re-installed it, the problem still exist. Also on the expand screens that do work on the right side there is a very thin white line coming down the border. I'm not the only one with this problem. please help with this problem.

Indeed, this is a bug in HTTPS-everywhere which you can see here : https://trac.torproject.org/projects/tor/ticket/4032

TS2972 when i connect my apple TV flashes quickly and not working

when i connect my apple TV flashes quickly and not working

connect it using usb to the computer and restore the os

My desktop is only loading to a grey/blue screen with the apple symbol and the "working" symbol....help!???!!

Help, my niece played with my keyboard and now my mac only loads to the blue/grey screen with the apple and a working symbol...help please!

The following support article is somewhat outdated. Where it refers to booting from an installation disc, you should boot from your recovery partition (if running 10.7 or later) by holding down the key combination command-R at the chime.
Mac OS X: Gray screen appears during startup

RAM Problems after update and Restart. 3 beeps with led. Memories and Slots work alone, but together the problem continues.

I make some updates and restart my Macbook Pro, and the screen became Grey with 3 beeps with Led.
I read it could be the RAM memory. So I opened it and tried to reconected them.. but the problem continues.. So I asume it was one of the memories or one of the Slots... But when I tried them separetly all the Slots and memories worked... But togheter the problems continues.
Any suggestion?
The Mac worked perfect! There where just some updates...and before the restart, a pop up appeared saying that the updates could not be done because of an error... after that... the restart, the grey screen, and the 3 beeps with 3 leds.
Thanks and sorry for the bad english!
PS: Its 2008 so no warranty.
Hernan.

Have you tried putting back the original memory and seeing if that works?
Also if you could tell us the mode of the MBP, how much memory was in it and what you are upgrading to it would help.

Cannot type Japanese in a flash field, with latest flash plugin and firefox.

When I try to input Japanese with my IME(I tried google and Microsoft one)in a flash field, the IME just won't activate. I am stuck with only being able to use western letters and I can't change it in any way. If I load up Opera I am able to input Japanese fine in flash fields.

@iamjayakumars
The website is used the most is the site below. It is a japanese chat site that uses Flash, but the sites Kurosan posted also does not work for me.
http://pigg.ameba.jp/core/main
@Kurosan
Great(well not really great..) to hear I am not the only one with this problem. Thought I was going nuts.
@amitshree
The keyboard is set to Japanese Language(I can see the JP at the taskbar of the keyboard), but there is no way I can change the input to Japanese. I am stuck with western letters.
Also when I click on a flash field. The IME logo disappears , this normally doesn't happen when I click on a normal text field.

Im scrolling a div with a flash scrollbar and it works, almost

Similar Messages

Maybe you are looking for