Imac Display not working at all
I'm using the latest release of Leopard on my iMac that is less than a couple of months old and the display just went off, totally black and I cannot get it back on.
I have tried:
- Unplugging all peripherals and rebooting
- Resetting the PRAM (http://docs.info.apple.com/article.html?artnum=2238)
- Resetting the System Management Controller (http://docs.info.apple.com/article.html?artnum=303446)
What is strange is that I left the machine running for a couple of hours and went back to it, waking it from sleep by touching the keyboard and the display actually came back on and I thought it was miraculously fixed. However, as soon as I touched the mouse the display went off again and I haven't been able to get it back.
I can hear the machine when it boots and I know it's starting ok because I can hear the noises when I turn the volume up and down using the keyboard. Because the display did come back, although extremely briefly, I reckon it has to be a software problem.
What's really frustrating is that I haven't got screen sharing turned on and I'm writing this from my MacBook which I could use to try to diagnose the problem.
I have figured out all the keyboard commands I need to bring up the screen sharing dialogue but I don't know what the keyboard command is to tick a check box!
Any help would be greatly appreciated.
Paul.
Luckily mine is still under warranty, but it is still away being repaired.
Strangely I discovered that it would still run an external monitor (but i couldn't set it to be primary) so the problem can't be with the graphics card.
This whole experience (combined with numerous separate issues I have had with Leopard) has certainly tainted my view of Apple.
Similar Messages
-
Zen Touch, LCD Display not working at all, but player is f
So I'm on the bus, listening to my Zen Touch, it's working fine, the LCD is working fine. Everything is dandy. Few songs later, I pull it out of my pocket, the LCD is blank. But the player is still going. I can change songs, adjust volume, play all randomly etc etc, but I'm working blind, cause there is nothing on the display whatsoever.
It was a dry day, so it wasnt moisture damage or anything. And I didnt drop it, or bang it. It went from working fine, to going in my pocket, to not working. Really strange.
I'm sure its just defecti've, but I leave for a week long vacation in just under an hour (good timing eh? works fine for 8 months and then bam, 6 hours before I leave the country...ugh **bleep** karma), and I'm praying theres a simple fix I'm just missing. I already tried multiple restarts and resets, and I even charged it for a few hours, thinking the battery was just getting weak. But no dice. I doubt anyone can help me, but I figured it's worth at least a shot.Message Edited by myname on 0-24-2005 05:07 AMIf it won't display anything at all, even after a reset, it's likely there is a hardware problem. You could connect the player to the PC and update the firmware, but I suspect it'll be the same after that, unfortunately.
Cat -
20" iMac, display not working properly, otherwise OK
I have a 20" imac with 10.4.11 loaded, Have had it for about 2 years, no problems at all except occasional wake-from-sleep issue. All of a sudden, the display has quit working properly. The computer sounds like it boots fine, but the display only shows a very deep blue (not black)and the light ind the lower right corner is "on".
I tried holding a flashlight up to the front as some have suggested, and I do not see see anything at all. This would seem to rule out backlighting or screen brightness issues. I have also reset the PSU and the P-ram, also to no effect. Tried booting from the 10.4 disk, also to no effect.
My teenagers won't admit having any problems, but one of them did admit to turning off the system several times using the power button in an attempt to reset AirPort. Any thoughts? the only other easy thing I can think of is the battery, could that be causing this much trouble? do the display cables ever detatch from the MB or anything like that? any ideas greatly appreciated.
Thanks, EricHey Eric,
This is from the Service Source:
"Screen is dark, fan is running and the hard drive is spinning. You may hear the startup
chime as well.
1. Reset parameter RAM. Press Command-Option-P-R during startup before “Welcome to Macintosh”
appears.
2. The system software could be damaged. Start up from the system CD that came with the computer.
3. Remove the user access panel on the bottom of the computer. With the unit powered on, check if a red
LED is visible in the access door. If the red LED is on, power is on. If you don’t see the LED glowing
red, follow the steps under the symptom “No Power”.
4. Disconnect the A/C power cord. Place the unit in the service stand and remove the user access plate.
Press the PMU reset button on the logic board. Refer to “Resetting the PMU on the Logic Board”
mentioned earlier in this chapter.
5. Check for external video. Connect an external monitor to the mini-VGA port. If you don’t have external
video, replace the main logic board. If you do have external video, go on to the next step.
6. Open the bottom housing and verify that all the cables are securely attached. Pay special attention to
the video cable (located near the modem). If the cables are securely attached, go on to the next step.
Warning: Whenever the bottom housing is opened for service, you must do two things:
• You must clean the original thermal film from the surfaces joining the thermal interface layer and
reapply thermal paste to the thermal pipe.
• The bottom housing has four torx screws that must be tightened to at least 17 in.-lbs. If you do not
have a torque driver, you will have to make sure these screws are tightened by hand FIRMLY, BUT
NOT FORCIBLY. Or, purchase the service tool (076-0899) in order to ensure the thermal pipe is
firmly mated with the top base. If the bottom housing is not securely attached to the base in this
fashion, the CPU may overheat and become damaged.
7. Check the connection of the video cable to the LCD flat panel display (under black tape).
8. Replace the inverter board.
9. Replace the LCD display. Important: If you are replacing the display, be sure to install the new display
shield and EMI gaskets that come with the new LCD panel. Installation instructions are included with
the new display panel. Additional display shields/gasket kits are also available separately as a kit, part
#076-0958.
10. Replace the neck assembly
11. Replace the logic board.
12. Replace the power supply board."
In my experience the connectors both on the logic board and on the back of the LCD panel have been known to come loose. I also have a neck assembly here that went bad.
If you need more info email me.
Richard -
External (thunderbolt) display not working at all when in clamshell mode
I have a brand new macbook pro (2014). With a thunderbolt display and external keyboard/mouse attached, I use the computer as a 'desktop' all the time (lid closed). Always worked fine, until I upgraded to Yosemite. Now, either the machine doesn't boot at all, OR (even more strangely), it takes many minutes to boot up, and the animation of fades and also the mouse cursor jump around extremely slowly--the interface is completely unusable and I have to open the display and manually force a shutdown by holding the power button down. Without an external monitor attached, everything seems to work just fine.
Has anyone else experienced this, and has anyone found a work around?
Thank you,
Frustrated with Apple's apparent software quality decline,
MarkRan Etrecheck and my results are:
Problem description:
Thunderbolt Display doesn’t come on after power up. Also my desktop picture gets changed after display is restored.
EtreCheck version: 2.1.5 (108)
Report generated December 31, 2014 at 10:08:41 AM CST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (Retina, 15-inch, Early 2013) (Verified)
MacBook Pro - model: MacBookPro10,1
1 2.7 GHz Intel Core i7 CPU: 4-core
16 GB RAM Not upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
NVIDIA GeForce GT 650M - VRAM: 1024 MB
Thunderbolt Display 2560 x 1440
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:6:14
Disk Information: ℹ️
APPLE SSD SD512E disk0 : (500.28 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk2) / : 499.07 GB (357.63 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 499.42 GB Online
ST1000LM024 HN-M101MBB disk1 : (1 TB)
THERESA EXT (disk1s1) /Volumes/THERESA EXT : 190.04 GB (189.34 GB free)
1TB External (disk1s2) /Volumes/1TB External : 810.17 GB (120.69 GB free)
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. MacBook Air SuperDrive
C-Media Electronics Inc. BassJump Core
Apple Inc. Apple Thunderbolt Display
Apple Inc. FaceTime HD Camera (Display)
Apple Inc. Display Audio
Firewire Information: ℹ️
LaCie Rugged FW/USB 800mbit - 800mbit max
disk3s1 (disk3s1) <not mounted> : 32 KB
320GB External (disk3s3) /Volumes/320GB External : 499.97 GB (88.33 GB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Apple Inc. Thunderbolt Display
G-Technology G-RAID with Thunderbolt
LaCie Rugged mini
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.Leawo.driver.AudioDevice (1.0.0d1 - SDK 10.2) [Support]
[not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) [Support]
[not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.4) [Support]
[not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.4) [Support]
[not loaded] com.sierrawireless.driver.SierraODSupport (2.0.5) [Support]
[loaded] com.sierrawireless.driver.SierraSerial (1.0.1) [Support]
[not loaded] com.sierrawireless.driver.SierraSupport (1.4.5) [Support]
[not loaded] com.sierrawireless.driver.SierraSupportKicker (1.4.5) [Support]
[not loaded] com.sierrawireless.driver.SierraSwitch (1.2.0) [Support]
[not loaded] com.twelvesouth.driver.BassJumpOverrideDriver (2.5.1 - SDK 10.9) [Support]
Launch Agents: ℹ️
[running] com.flipvideo.FlipShare.AutoRun.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.twelvesouth.bassjump.observer.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[not loaded] com.gopro.stereomodestatus.plist [Support]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[not loaded] com.sierrawireless.SierraReset.plist [Support]
[running] com.sierrawireless.SierraSerial.plist [Support]
[running] com.sierrawireless.SWoCMon.plist [Support]
[running] com.twelvesouth.bassjump.player.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[not loaded] com.macpaw.CleanMyMac.helperTool.plist [Support]
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
User Login Items: ℹ️
GrowlHelperApp Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
Suitcase Fusion Application (/Applications/Extensis Suitcase Fusion/Suitcase Fusion.app)
AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app/Contents/Support/AdobeResourceSynchronizer.app)
Dropbox Application (/Applications/Dropbox.app)
Google Drive Application (/Applications/Google Drive.app)
AirPlayitServerManager Application (/Applications/AirPlayit.app/Contents/Resources/AirPlayitServerManager.app)
Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.0 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 [Support]
RealPlayer Plugin: Version: Unknown [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
AdobePDFViewer: Version: 10.1.0 [Support]
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User internet Plug-ins: ℹ️
BrowserPlus_2.9.8: Version: 2.9.8 [Support]
fbplugin_1_0_3: Version: Unknown [Support]
Safari Extensions: ℹ️
Facebook Cleaner [Installed]
F.B. Purity - Cleans Up Facebook [Installed]
AVG Do Not Track [Installed]
3rd Party Preference Panes: ℹ️
3ivx MPEG-4 [Support]
BrowserPlus [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
GoPro [Support]
Growl [Support]
Java [Support]
Tuxera NTFS [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.07 GB Disk used: 141.44 GB
Destinations:
Data [Network]
Total size: 3.00 TB
Total number of backups: 30
Oldest backup: 2014-07-08 04:52:19 +0000
Last backup: 2014-12-31 02:32:04 +0000
Size of backup disk: Excellent
Backup size 3.00 TB > (Disk size 499.07 GB X 3)
Top Processes by CPU: ℹ️
4% WindowServer
0% fontd
0% SystemUIServer
0% AppleSpell
0% Google Drive
Top Processes by Memory: ℹ️
309 MB mds_stores
241 MB Dock
206 MB com.apple.WebKit.WebContent
103 MB Safari
103 MB Google Drive
Virtual Memory Information: ℹ️
12.03 GB Free RAM
2.51 GB Active RAM
1.42 GB Inactive RAM
1.22 GB Wired RAM
2.03 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 31, 2014, 10:03:01 AM Self test - passed
Dec 30, 2014, 05:26:28 PM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2014-12-30-172628_[reda cted].crash
If there's anyone out there that can help please...
I am running the latest firmware on the TBD and all software is up to date as you can see. -
Hello all,
I purchased a refurbed 20" iMac that arrived 3 days ago. Today I turned the computer on and put in a CD to listen to while I was doing some work. After about 30 minutes of the CD running I went I tried to bring the display back up (it had gone to sleep after the arbitrary amount of time). The display refused to come back on, but iTunes still seemed to be working fine. I could stop and start the CD using both keyboard commands and the remote.
I held down the power switch, shut the machine down, waited, and tried to start it up again. Same problem. It started up, but nothing from the display. I can insert a CD and it will play fine, but I cannot get anything from my display, it's just black.
Any thoughts?
The only thing I had done before hand was install an Epson R220 printer that didn't seem to be working properly, but didn't seem to be affecting my other systems. I disconnected the printer from the computer before starting up again.
Thanks for any suggestions.
MarkWow! It's been 3 days and no one has replied to your question. I know there are people on these forums much more knowledgable than I, but if you haven't got it going yet I would first call Applecare and get their input. I assume you bought it from Apple or it is at least under warranty with Apple. Something else you might try is connect an external monitor via a mini-dvi to vga adaptor ($19) and look at the system profiler to see if the lcd display is listed. You can also check the display preference and try different resolutions to see if any work. Whatever the outcome, I hope you'll post your results. Good luck.
-
Mailbox sound on iMac is not working. All other sound works but not mailbox.
I can play music, hear videos, etc. But there is no sound when checking for new mail or sending out new e-mails.
Mail ▹ Preferences ▹ General ▹ New messages sound: choose one
Play sounds for other mail actions: check -
HI,
Have 10.10.3 imac version- email system does not work at all it display emails up to the installation of the new version, no incoming or outgoing emailsThat helped thanks-
I was able to solve this by deleting all "Envelop Index*"- and "ExternalUpdates*"-files in ~/Library/Mail/v2/MailData. After that I restarted Mail and let it reindex all mailboxes. -
After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ
Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes -
3rd display not working with Yosemite. Was fine with Mountain Lion. Any suggestions?
I use my Imac as a digital aidio workstation with 3 displays. Never updated to Yosemite due to issues with the DAW manufacturer software. Now that the issues were resolved, I said what the **** and I updated to Yosemite. Now my 3rd display does not work at all and I am not a happy camper. Gives credence to if it ain't broke don't fix it. Thanks all.
Matt
Va Bch, VAHello mrtessitor,
I'm sorry to hear you are having these issues with your iMac after a recent update to Yosemite; I know how frustrating that can be. If you are having issues with one of your external displays that was working previously, you may find the information and troubleshooting steps outlined in the following articles helpful:
OS X Yosemite: Connect multiple displays to your Mac
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Sincerely,
- Brenden -
Java does not work at all upon using the update manager to update to firefox 3.6.10 for Ubuntu 9.0.4
OS: Ubuntu 9.0.4
Browser: Firefox 3.6.10
upon updating to firefox 3.6.10, java does not work at all.
websites that use java do not work at all anymore, when they worked just fine before the updating thru update manager. e.g. hulu website cannot play any of the shows.
i can give the folder of bookmarked pages i tried.
how to do that on here, i've yet to see if possible.
i can even give saved text from the terminal concerning certain attempts.
when i updated thru update manager, it gave some weird java plugin that wasn't there before "The IcedTea Web Browser Plugin IcedTea6 Java Web Browser Plugin (execution of applets on webpages)".
i uninstalled this as instructed by an answer found in one of the pages i saved, cuz it was conflicting w/another java program the updater said i needed. right now, i don't remember for sure what it was. it perhaps was realplayer flash or Java itself. w/all the hours/days of searching i put in, it's difficult if not downright impossible for me to remember all the specifics of what i tried.
i've searched throughout many webpages (including many searches on mozilla, ubuntu, java, etc) for instruction in fixing the problem.
oh, and incidentally, on the Java site, when i try the verify test of Java, firefox pops up with that yellow bar right below the slew of tabbed website windows, giving the statement "additional plugins are required to display all the media on this page. (w/link to) install missing plugins ." which is what i do, go thru the requesting plugin installation. it comes up with, guess what, the IcedTea Java Plugin. i click on the 'next' in the "Plugin Finder Service" box that pops up, & all it gives me is "No plugins were installed. IcedTea ...Plugin failed. and the link 'find out more about plugins or manually find missing plugins'". the link takes me to some of the very things/plugins that wouldn't install in the first place. the Java test failure is a LOL funny, as what plugin it is saying is required (IcedTea) is a recommended alternate program to display the very test in the first place.
i followed the given instructions on those many searched pages, in every case (barring what i may have just plain missed), but to no avail.
i've even gone to the point of trying to reinstall the previous 3.5.13 firefox version, from mozilla site. even that wouldn't install.
i've tried installing Java for my sys direct from it's site. nada.
now it's time for me to post the problem & perhaps someone will come up with some kind of "dummy" way to fix it.
until then many sites a regularly use are totally useless to me on this fast puter.
the only way i can get to use such sites, are two choices: 1. use a dinosaur laptop, which is slower than molasses & cannot handle to any streaming stuff, or 2. use an available internet access puter at the library. but useage for ea person per day is limited to only one hour a day. and one can end up waiting for an hour or more ( in the busiest periods) to even get to use one.
so, is there anyone at all, who knows any for-sure working fix for this problem?
thanks muchly :^D
p.s. i can't pay anybody any money for such help, as is required in certain sites (e.g. Java website), cuz i don't have any.
i can pay in labor tho, if there is someway to find someone who can physically be at this puter w/me, taking me step-by-step
sorry for the 20-pg essay. i hope it was all clearly understood. if, not, well, clear communication is always what is needed, ask away.Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 9.0 r999
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
http://java.com/en/download/faq/firefox_newplugin.xml
See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html -
Caller display not worked since June 2014
On 26/06/14 I reported a fault (VOL-**********) that the caller display function had stopped working following a thunderstorm in the area. According to the fault status this fault is showing as being corrected and closed on 02/07/14 when in fact the fault still exists. I tested the line using the BT test socket with a new BT2000 phone and this displayed ‘incoming call’ therefore my internal wiring is not part of the problem. I have also dialled the test code *#234# to check if the caller display service is available and confirmed that it is. I then tested the new BT2000 phone on the neighbour’s telephone line and this showed the caller ID for incoming calls, as did my other telephone as well; therefore none of the telephone handsets are at fault. Three times BT have informed me that the fault has been fixed and yet I still have no caller display. Reading through the forums it would appear that other people have encountered similar issues and that the problem is at the exchange, “An Openreach engineer discovered that the RS232 burst transferring the CLI number up the line was too weak and he then went down to the exchange to investigate. He then discovered that the fault lay in the ADSL device which lies between the analogue exchange equipment and the outgoing line”.
I’m surprised to see that BT are taking so long to trace a fault in their system last raised 5/8/2014 (VOL012-**********) and that they haven’t sent an engineer to the property or to the exchange to check the problem.
My patience is wearing thin over this problem with my Caller Display not working as it started in mid June. I’m also becoming less enthusiastic about BT and find it harder to recommend them to others.
My last message from BT, tells me that it should be back to normal on the 8 August. However, it is still not working. Their message that my phone should be back to normal now and if it isn’t report this to BT, is ridiculous. If an engineer had investigated what was causing the fault and found it, then he would have fixed it. However, either an engineer has not investigated the fault or BT is not competent in fixing their own service faults and makes these statements with crossed fingers?An engineer called yesterday and told me that he had been asked to test the line for a voice fault not a Caller Display fault. However, his testing revealed there is no line fault, CLI signal is strong and he was happy that the new BT2000 phone (bought after the lightning strike) is working properly. (This phone had also been tested on a neighbour’s phone line where it displayed the callers number). He also found that this same BT2000 phone on my line was not displaying the Caller’s number (CLI), but couldn’t offer any reason why.
I conjectured with him that these tests must bring the problem down to a corrupted CLI signal which does not allow the phone to understand the phone number being sent.
When the lightning struck the phone line back in June, it blew the telephone connection in the back of the Sky Box with a flash and bang (telephone cable now removed from the Sky box). It shorted the Openreach Faceplate (now replaced) so that the phones and broadband stopped working and it caused the phone to light up and react as it does when a call comes through.
Now isn’t it possible that the lightning also travelled along the copper wire to the green cabinet just outside the house and damaged something there which is corrupting the CLI signal, but which does not not show up when the voice line is tested? If not, then there must be a problem further back in the infrastructure, possibly in the Exchange, that is causing a corrupted signal to be sent to my phone?
He told me that another team would have to investigate the Caller Display fault as he was instructed to look into a voice issue and as a field engineer he was not able to investigate any problem that might be in the Exchange. I don’t know whether this Exchange Team would be able to investigate a problem in the Cabinet if nothing is found in the Exchange or can that only be done by a field engineer? He told me to contact BT again as he’d done all that he had been instructed to do and they would have to instigate a fault team to further investigate the problem.
When all this is considered we have the basic problem that BT are unable to provide me with a Privacy and Caller Display Service that I have been paying for, because of a fault in their infrastructure. How much longer is it going to take before they correct the problem that’s been going on since June 2014? -
Video iChat on my iMac is not working
Video iChat on my iMac is not working. The i chat buddies screen is up all right. I can see my buddies' pictures on the screen. But I can't start the video iChat. It worked fine for a few years...suddendly it does not work???
HI,
In the Buddy list you can see the Video Chat green icon for your Buddy.
Their Buddy pic is also on view.
Clicking the Green Icon (Or highlighting and using the Video Menu > Invite to Video chat) does what exactly ?
Do you get to see your Preview ?
Does it say Connecting ?
Do you get any Error message or pop up ?
Have you changed your router ?
Have you allowed iChat through it ?
10:07 PM Friday; April 26, 2013
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
csrAttachmentUploadDiv partattachment is not rendered SP 2013(Attach file in not working for all the list forms)?
Ravi
function ShowPartAttachment() {
ULSopi:
if (document.getElementById("part1") == null || typeof document.getElementById("part1") == "undefined") {
alert(Strings.STS.L_FormMissingPart1_Text);
return;
(document.getElementById("part1")).style.display = "none";
(document.getElementById("partAttachment")).style.display = "block"; //problem hereAm also facing the similar problem....any iputs are highly appriciated.
Issue..
1) Defined the attachment type in IMG.
2) Added the attachment type "SFREEATTM" by selecting other attributes---> Attachment Types.
3) Attached the excel file in the design.
See the screen shot below:
The Issue is when testing through tcode nwbc in the inbox the attachment tab is not visible after selecting the particular form.
Please see the screen shot below:
Did i miss any Configuration?? Please suggest...
Regards,
Naveen -
8700c and device manager not working AT ALL
So I just recently got a Blackberry 8700c and for some reason the device manager does not work at all. Like my computer will make a dadunk noise when I connect my Blackberry via USB cable but it won't register that my blackberry is connected. I cant go to my computer and actually click on my blackberry.
I have windows vista and the device manager software I am using is the one I got in the box. 4.1
I am also using AT&T please help.
All I want to do is be able to connect it to my computer and upload themes and whatever else I want to the phone. But it isn't working
Solved!
Go to Solution.Do you have Desktop Manager loaded to your PC? You mentioned device manager, but I would recommed Desktop Manager ver 4.7
Download Desktop Manager from here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I downloaded the piano keyboard app....will not work at all....the screen comes up but no a tigon when trying to use...also no sound.
Try a couple of basic troubleshooting steps,
Quit the app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Delete the app and reinstall. You will not have to pay for it again as long as you use the same Apple ID that you bought it with. Hold down on the icon until it jiggles, then tap the X on the icon to delete the app. Tap the home button to stop the apps from jiggling. Go back to the App Store purchased tab and download the app again.
Maybe you are looking for
-
Safari cant connect to a server.
I have Safari Version 7.0.2 (9537.74.9) Running on a powerbook with 10.9.2 message. when I open google, facebook or twitter... "Safari cant connect to server." and firefox .. but I can open almost any other website. This is the message I get in
-
hi my canon video camera (HV20) wasnt being recognised by iMovie (error message...in system report was "Unable to list FireWire devices".) in researching a solution i came across some firewire advice in http://support.apple.com/kb/HT1151#trouble whic
-
How can you type without using capitals at the beginning of a sentence?
How can you type something without using a capital letter at the beginning of a sentence. It always automatically outs a capital letter and I don't want one because it could be a case sensitive password?
-
Not able to find Interactive View Mode for WEBI in BI LaunchPad Preferences (BI 4.1 SP04).
Hi I am not able to find Interactive View Mode for WEBI in BI LaunchPad's Preferences. It used to be there for BOXI R3. Is this feature has been revoked by SAP in this new release. Please confirm and clarify. Thanks!!
-
I am using an iBook G4, with system 10.4.6, and Safari 2.0.3. Unexpectedly yesterday when I tried to download a web page there were no pictures. The printed narrative is fine, as well as movies using Quick Time or Windows Media. The only thing I can