Image action: push

I have a large vertical image on a slide that I want to effectively scroll through without stops. I applied the push action to the image which does exactly what I want EXCEPT that it fades to black at the end.
Is there some way to get this same effect without the fadeout at the end?
I've also tried breaking the image up into pieces and creating separate slides, then using the push transition with an automatic progression, but even at "0.0 seconds" of time, there is a pause between slides.
Ideas?

Welcome to the forums!
Do you mean the Push transition? The terminology can be a bit confusing, but "transitions" are effects that move from one slide to another (and Push is one such transition), "builds" are animations that bring an element onto or off of a slide, and "actions" are animations that alter an already-visible element on a slide (and there is no "Push" action).
Given what you've said, it seem like a Push transition is probably not the best approach. The easiest way to scroll an image is to use to Move In build -- position the image where you want it to end, then in the Build Inspector, apply the Move In build, setting it to move up from the bottom. Adjust the timing so that it is as slow as you like. (Alternatively, you can use the Move action, positioning the image off the screen to start, and using the action to place it at the finish point.)

Similar Messages

"Print Images" action fails

I use an automator workflow that uses the "Print Images" action and it works great on my Tiger machines. However, it does nothing with 10.5. Automator gives the following error: The action "Print Images" encountered an error. Check the action's properties and try running the workflow again. Needless to say, I've checked all properties and it fails.
Does this action work with Leopard? The same workflow works fine with Tiger.

I was having this problem too, but have worked round it thanks to this post: http://forums.mactalk.com.au/11/22188-automator-wont-print-preview.html
In addition to not having spaces I found punctuation to be a problem too.
"Brother HL-2240D series" didn't work
"Brother_HL-2240D" didn't work either, but
"BrotherHL2240D" did.
If just changing the name doesn't work, try adding the printer again with the new name.
I'm using Snow Leopard

Automator - When using the Render PDF as Image action, the first file is out of order (naming). How can I fix this?

I am creating an Automator Action to render PDF files as Images. When the PDF is multiple pages, the first page has no numbers, so it ends up at the end of the list. Here's an example:
When it is a single page, the result is:
filename.png
When it is multiple pages, the result is:
filename 141.png
filename 142.png
filename 143.png
filename 144.png
filename.png
First, it always seems to start at 141...not sure why.
Second, I did try to add an action to rename and make sequential, however the resulting list was in the same order... except with additional numbers at the end.
Any suggestions?

I see.
This worked when I tested on 1 PDF:
The Run Shell Script Action is:
basename=${1##*/}
echo ${basename%.*}
If it's still out of order, add: Sort Finder Items [by creation date] after Render PDF Pages as Images

'Print Image' action - unexpected repeating...

Why hello.
I've attached an automator script to a folder action that does a couple things:
1. Get Specified Finder Items {specified folder}
2. Get Folder contents
3. Rotate Images
4. Crop Images
5. Print Images {printer specified}
6. Move Finder Images to Trash
It's for a ID-Photo printing project... and I'm using Canon's Remote Shooting capability. Basicly - once the photo is snapped - it empties into {specified folder} triggering the automator script. PROBLEM IS - that the blasted thing is queuing up the same altered photo 1,2,3 or even 4 times - seemingly randomly. Any idea why this would happen?
(Note: if I were to simply drag an image into the specified folder - the script only prints once.)
Message was edited by: anablepo

Kate
Jpeg format only supports 8bit color. Even if 16bit color was supported most OS device drivers only do 8bit color and printers are 8bit color devices. With the image Processor you should be able to specify jpeg quality set it to 10. That will be much smaller file size then quality 12 and you will see no difference in print quality between quality 10 and 12. You should also make sure convert to sRGB is checked. Print Labs expect images in sRGB. Do not resize your images however make sure your source files print dpi resolution is set to print the size image you want.
If you want to automate the print resolution you can download my crafting actions package. I contains a Plug-in script I wrote that you can use in actions to set the images DPI to have the images longest side print the size you record in the action.
Crafting Actions Package UPDATED Aug 14, 2012 Changed AspectRatioSelection Plug-in script added Path support.
ContainsExample
Download
Action Actions Palette Tips.txt
Action Creation Guidelines.txt
Action Dealing with Image Size.txt
Action Enhanced via Scripted Photoshop Functions.txt
CraftedActions.atn Sample Action set includes an example Watermarking action
Sample Actions.txt Photoshop CraftedActions set saved as a text file.
12 Scripts for actions

Fit Image action stops on some jpgs

I need to batch thousand of images w different file size dimensions & formats (.eps, .tif, .jpg) to have a print dimension 3"x2" @ 300 dpi (900x600 pixels). Fit Image seems to be the "perfect" feature for this task as long the image starting resolution is 300 dpi. If the image starting resolution is 72 dpi I have to uncheck "resample image" change document dimensions to 3"x2", check "resample image" & then change the resolution to 300 dpi to meet our print requirements.
From Bridge CS5 I select the images that have resolution of 300 dpi> Tools> Photoshop> Batch> I select the action Fit Image. The problem I'm having is w the jpgs. Sometimes I get the JPG options window. (See attached) which stops the batch to keep processing images until I select OK. I noticed this doesn't happen w every jpg. Is there any way to automate this task without getting any windows?
I have learned a lot reading posts related to the Fit Image feature. I want to thank all the Photoshop gurus out there.
PS.: I tried Image Processor... but I think Fit Image work better for my purposes. I'm using PS CS5

Thank You c.pfaffenbichler for your quick response.
I was searching for Fit Image in the forums & spent a good amount of time yesterday trying to find answer. I guess I have to keep looking why I'm still getting the JPG options window.
c.pfaffenbichler wrote:
I think there have been previous threads about this, but you’d have to check them out to see if a workable solution was offered.
Re-saving jpgs seems less than adviseable to me in any case.
And I wonder why you find Fit Image more convenient than Image Processor in this case?
In Bridge I select all the images that are 300 ppi including jpg, eps & tiff files. If the original file is a jpg using Image Processor was Ok but when I'm processing eps & tif converting those files to jpg using Image Processor I noticed that the picture quality changed (blur) & I have to sharpen the pictures.
I would like to hear your opinion about Image Processor & why do you think is a better approach than Fit Image action

af:Image action

Hi,
I am using <af:image> in my jspx.
There's a requirement that, on click of this image the elements of one list box should shift to the adjacent list box
To acheive this I am using the following code ( I had seen an example in forum for the button setActionListener in the similar way. Button image does not support actionlistener, hence using property listener):
<af:image source="/images/move_to_right_edge.gif"
binding="#{backingBeanScope.backing_GridSettings.image2}"
id="image2">
<af:setPropertyListener from="#{backingBeanScope.backing_GridSettings.selectManyListbox1}"
to="#{backingBeanScope.backing_GridSettings.selectManyListbox2}"
type="launch" />
</af:image>
But the above code doesn't seem to work, it says that the type attribute( a property in setPropertyListener) is invalid giving the following exception:
java.lang.NoSuchMethodException: oracle.adf.view.rich.component.rich.output.RichImage.addLaunchListener(org.apache.myfaces.trinidad.event.LaunchListener)
I tried various values for type attribute like"action", "focus" etc, but none of these seem to work.
Any help on this would be greatly appreciated.
Regards

You can use something like this
<af:commandImageLink action="#{backingBeanScope.backing_GridSettings.moveToRightEdge}" icon="/images/move_to_right_edge.gif"/>
Or you can set icon on a commandButton, there are several ways to achieve this.
Pedja

Unsuccessful in creating simple Disk Image action - please help

I am new to Automator and thought I was getting the hang of it. I am trying to create a simple action that will take my selected files, then put them into a .dmg. I want it to ask for a name and location each time. I thought I had it but every time it creates the image it self deletes. Now I am totally confused.
I searched for "disk image" in the forum but didn't find anything.
Thanks for any help.
CHris

It sounds like you are unmounting the dmg when done - what actions are in your current workflow? You can use the option to show the action when it runs to get a dialog with the selected items for you to put in the names and location.
1) Get Selected Finder Items
2) New Disk Image { Options:
Show this action when the workflow runs;
Show only the selected items (check Volume name, Save as, in) }

Image action

Hi,
Can an image be added some action, like button clicked?
Thanks
Sam

I think not.
I found we have to use a button on top of the image to make it seem like an image is clicked.

How can I insert en empty page without images being pushed of their place?

I made a document that contains text and a lot of images. Now I need to inset an emptey page at the beginning of the document but when I insert a page brake, all the images in the whole document are being pushed of their place, making to document a mess. I already locked to images to see if this helps but still they are being pused out of context with the text that they are refering to. How can I insert an empty page without this hapening?
André

Try inserting a section break. The images should stay in their original section. Of course if you alter the text in that original section, the images will not move unless they are inline.

Print Image Action

OK so this would be really convenient if I could get the Scale to Fit option to actually work. Say I have an 10x15-inch document, and I want to print it on a letter sized paper, which we print all our proofs on. Our document sizes vary greatly. When I run them through this action they simply crop off what doesn't fit from the original size. Seems like it should have the option to choose output size as in a print dialog box based off the printers' driver. Any suggestions to remedy this would be greatly appreciated.

I don't believe that you can do that with an action in Acrobat.
In Acrobat X Pro, when I include the Print command in an Action with the Action Wizard, and I attempt to set an option, it gives me a message that the options must be set at the time of execution.
In other programs like Adobe InDesign, you could create Print Presets that would allow you set such options, but apparently not Acrobat. (Unless someone can find a way to do it in JavaScript.)

Dynamic image actions on swf

Hi everyone;
Does anyone works on loading image and; resize and move that image on swf?
thanks from now on

Hi again;
The thing that I want to do is; I can upload a picture; after that I want to import this picture into a new scene and edit it like move picture and resize it by mouse after I published my flash.
any idea for that?

Rollover image action difficulties

Hi,
I have created in Dreamweaver nice rollover buttons and
linked them to an iframe. Now i'm trying to figure out if there's a
way how to make the rollover button stay in mouseover state until
another button is clicked (and another iframe content opens).
My code for the rollover image for now looks like this:
<a href="history.htm" target="content"
onmouseout="MM_swapImgRestore()"
onmouseover="MM_swapImage('history21','','vilnis/button1a.gif',1)"><img
src="vilnis/button1.gif" name="history21" width="183" height="111"
border="0" id="history21" />
Any help appreciated!

Remove the automatic restore from each button. Make each
button's click
swap in the desired image on that button and swap out the
button image on
ALL other buttons.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"spahns" <[email protected]> wrote in
message
news:fct762$kub$[email protected]..
> Hi,
>
> I have created in Dreamweaver nice rollover buttons and
linked them to an
> iframe. Now i'm trying to figure out if there's a way
how to make the
> rollover
> button stay in mouseover state until another button is
clicked (and
> another
> iframe content opens).
>
> My code for the rollover image for now looks like this:
>
> <a href="history.htm" target="content"
onmouseout="MM_swapImgRestore()"
>
onmouseover="MM_swapImage('history21','','vilnis/button1a.gif',1)"><img
> src="vilnis/button1.gif" name="history21" width="183"
height="111"
> border="0"
> id="history21" />
>
> Any help appreciated!
>

Problem in using Fire Action using an Image

I have used image icons on my table rows so that if the user wants to edit or delete a record he shall click on the image icon which fires a "Fire Action". Due to that I render a region at the top of my table and populate with the record's data to be edited or deleted.
Now if the user clicks on the edit button and the edit region renders at the top of the table region and without cancelling it or saving it, he goes out of the page.
When he again comes back to the page, this Edit/delete region is still rendered but ofcourse without any record's data.
To stop this I tried to put the unrendering function in the process request of the controller of this page. Here the problem is that, if I put the unrendering function in the process request of the controller, it shall unrender when the person opens the page, but again it shall not render the Edit/Delete region when the user clicks the image icon on the table bacause every fire action goes through the process request and the process request unrenders the region.
Kindly suggest how can I take care of this situation, as often the user goes out of the page without clicking on cancel or save button of the edit/delete region and lateron when he revisits the page and enterd the data, it gives Stale data error.
Regards

Hi Gaurav,
thanks for your reply, however I used the following in my process request:
String PgCurrentAction = pageContext.getParameter("PgCurrentAction");
if(PgCurrentAction==null){
//When the page is loaded, then PgCurrentAction shall be null.
//When the control goes through the Process Request function on clicking an Image action of the page, then PgCurrentAction shall return the name of the
//...Image Action.
//I call the SPEL to hide if the region is rendered.
So if the Process Request is entered while loading the page, then it shall Unrender/Hide the region is it is rendered, and shall not do so when Process request
is entered while clicking an image button for Fire Action.
Thanks
Regards

Action "Apply Assigned Imaging Bundle"

Version: 11.3.1
I need to run action "Apply Assigned Imaging Bundle" against several devices, is it possible to run this action against a device group? This option is greyed out, but just wanted to know if this can be done via a script or any other way to do this? Finding the device and ticking the box is not the quickest and easiest method when there are 100 devices to find.
Thanks
Richard

#!/bin/bash
### Script applyImageDaily.sh
### Script read all members of a group, assign and apply image. This script is assign to the ZCM-Server itsself as a linux-script action.
### After the execution of this script, a WOL-action to a computer-group(can be another group) start and computers create an image.
### To prevent imaging to office start hours, a few minutes after execution of WOL I remove the image bundle from all clients.
### With this you can control imaging-actions from ZCC, without using of console
### Version 1.1 09.11.2014 10:44 Uhr H.Schoene ###
ZMANBIN=/usr/bin/zman
DEVICEROOT="PCs"
DEVICEGROUP="PC-Gruppen/PCs-Imaging"
IMAGE="Images/DailyImage"
# Read all members of group PCs-Imaging, assign and apply Image
/usr/bin/zman wgm "$DEVICEGROUP" | grep Workstations | awk '{print $1}' | while read line
do
DEV=$line
# Image-Bundle assign
$ZMANBIN ba device "$IMAGE" "Workstations/$DEVICEROOT/$DEV"
# Image-Action apply
$ZMANBIN imaging-apply-assigned-imaging-bundle workstation "$DEVICEROOT/$DEV"
done

Hot spots pushing image down

This is probably a noob question but when I inset hot spots
into an image it pushes the image that is placed directly next to
it down to the next line. I'm not sure why it is doing this and is
there anyway to have hot spots and not bump the image down below
the one that is being editied? Thanks

Show us your page, please.
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
Web Dev Articles, Photography, and more:
http://sourtea.com
=============================================
Proud GAWDS Member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================
"helpthanks" <[email protected]> wrote in
message
news:ed4jfl$bf2$[email protected]..
> This is probably a noob question but when I inset hot
spots into an image
> it
> pushes the image that is placed directly next to it down
to the next line.
> I'm
> not sure why it is doing this and is there anyway to
have hot spots and
> not
> bump the image down below the one that is being editied?
Thanks
>

Image action: push

Similar Messages

Maybe you are looking for