Image button on flash mx

Hallo. i want your help. i m working a site in dreamweaver 8  i dont know if i made the right moves because i simply want when i move my mouse over one image i want at the same point to appear an other image without go to another window. I try with behaviors but it didnt work. now i m trying to make work as a button in flash mx. i follow the instructions but i have some questions an problems. First how can i save the button i just made? save as or export. And second how can i put it into the layer i made for that? import as for button or as flash button? thank u

Within the Flash file, you add code to the button to give it functionality.  The best preactice for this is to assign an instance name to the button (enter a name for it in the properties panel where it says "Instance Name") and then in the timeline where the button is you add a layer for actionscript and place code for the button in that frame.  To add the code, select the keyframe in the new layer and open the Actions panel (Window -> Actions).  Let's say you gave your button an instance name of "btn".   In the Actions panel you would type...
btn.onRelease = function(){
     getURL(http://www.whatever.com, "_self");
That code will cause the new page to open in the current browser window.  If you want it to open in a new window, either don't specify "_self" or replace it with "_blank"

Similar Messages

  • How to resize or scale a group/ image button on flash catalyst 5.5

    i have problems resize or scale images group or images button to interaction with others states, when try to resize i recibe this warning:
    Non-Resizable Content This content is fixed size......

    Hello,
    I can't or don't know how to make a scalable custom button   I've spent much time in google but I didn't find solution
    Please see FXP file: http://cl.ly/3P2p3q1Q3Q1x440G0A1Y
    Please help!!!!!
    Thanks a lot!
    Ivan

  • I am trying to create a button in flash that will display 4 separate images at the same time when clicked.  I can't get the images to stay on when I take the mouse of the button.  I need the actions script code to make this happen.

    I am trying to create a button in flash that will allow the user to click on the button and 4 separate images show up at the same time.  I can get the images to appear when I click the button but they will not stay on the screen.  I need to know what code I use to make the images stay once the button is clicked, then I need to know exactly where I place that code.  It does not appear to be possible to add the action code to the buttons layer since each time I add a new layer I just get another "up" "over" "down" and "hit" line.
    Thank you in advance
    AP

    It is not clear how you are trying to realize this from your description.  If you are trying to create this within a button symbol it will not work.  Explain your approach and if there is code involved, show what you have so far.

  • How to link an image to a button in Flash Builder 4

    I am new to Flash Builder 4 and have trouble to link an image to a button in Flash Builder 4.
    For example, I want an image of a round green button to replace the default retangle button in Flash Builder 4.
    Can anyone help me up?
    Thanks

    You could also use the mx:Image control and just add a click event handler:
    function(){return A.apply(null,[this].concat($A(arguments)))}
    <?xml version="1.0" encoding="utf-8"?>
    <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
            xmlns:s="library://ns.adobe.com/flex/spark"
            xmlns:mx="library://ns.adobe.com/flex/mx"
            width="500" height="400">
        <fx:Script>
            <![CDATA[
                import mx.controls.Alert;
                protected function image1_clickHandler(evt:MouseEvent):void {
                    Alert.show("You clicked the image");
            ]]>
        </fx:Script>
        <mx:Image source="http://helpexamples.com/flash/images/image1.jpg"
                click="image1_clickHandler(event);" />
    </s:Application>

  • Flash objects (images/buttons/etc) does not display on some PC's

    I am trying to deploy an out of the box web application called the Mid-Tier, where some forms/pages in the application have embedded flash images/buttons/icons that do not display on IE despite the fact that there is Flash installed on these PC's. Most of the PC's are XP.
    I suspect it is some of the security settings in IE. Unfortunately security options are disabled to end users so I cannot even get to see what these settings are..
    This web application works perfect on some test PC's that have default browser settings and the same flash version installed.
    The flash objects appear on these screens as white boxes instead of some control buttons and icons that should have been displayed.,. Hence these pages are non functional.
    Any hints?
    Joe

    Hello David,
    except the latest Flash Player you have also and the latest Java installed (Next Generation Java Plug-in 10.25.2 for Mozilla browsers) , check if you activate the plugins : [https://support.mozilla.org/el/kb/troubleshoot-issues-with-plugins-fix-problems#w_determining-if-a-plugin-is-the-problem Determining if a plugin is the problem], select always active.
    see also: [https://support.mozilla.org/en-US/kb/why-do-i-have-click-activate-plugins#os=win7&browser=fx23 Why do I have to click to activate plugins?]
    you said : ''One guy said you could fix it by going Tools > options > content > make sure Automatically load images is checked (but there is no such thing on that tab in my Firefox????)''
    not exist any more from 23.0 version and above (see : http://www.mozilla.org/en-US/firefox/23.0/releasenotes/) because of this : http://limi.net/checkboxes-that-kill , if you 1 (as a value) in '''permissions.default.image''' in [http://kb.mozillazine.org/About:config about:config] you are OK (checked[v]).
    also many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • How do I get a button in Flash point to a https page of PagSeguro.

    How do I get a button in Flash point to a https page of PagSeguro. Programming they provide is this:
    <!-- INICIO FORMULARIO BOTAO PAGSEGURO -->
    <form target="pagseguro" action="https://pagseguro.uol.com.br/checkout/v2/cart.html?action=add" method="post">
    <!-- NÃO EDITE OS COMANDOS DAS LINHAS ABAIXO -->
    <input type="hidden" name="itemCode" value="AC0DD53E5757C9F774629F9937513499" />
    <input type="image" src="https://p.simg.uol.com.br/out/pagseguro/i/botoes/pagamentos/120x53-comprar.gif" name="submit" alt="Pague com PagSeguro - é rápido, grátis e seguro!" />
    </form>
    <!-- FINAL FORMULARIO BOTAO PAGSEGURO -->
    If I past this programation in start HTML, I see border white in my page.
    I wrote a book and this schedule is to send to a secure site for sale
    I development my site in Flash 4 and now CC6. Export in Html
    www.escalasdecores.com.br

    Excuse me for my ignorance.
    I put the schedule as show below and generates an error when I export
    Scene 1, Layer 'Actions', Frame 350, Line 119, column 11 in 1061: Calling a possibly undefined method send through a reference with static type flash.net: URLLoader.
    Which is in line urlLoader.send (urlRequest);
    I used Snippets
    This programation:
    /* Evento de clique de mouse
    Clicar na instância do símbolo especificada executa uma função na qual você pode acrescentar seu próprio código personalizado.
    Instruções:
    1. Acrescente seu código personalizado em uma nova linha depois da linha que diz "//Iniciar seu código personalizado" abaixo.
    O código será executado quando se clica na instância do símbolo.
    button_7.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler);
    function fl_MouseClickHandler(event:MouseEvent):void
              // Iniciar seu código personalizado
              var urlLoader:URLLoader=new URLLoader();
    var urlRequest:URLRequest=new URLRequest("https://pagseguro.uol.com.br/checkout/v2/cart.html?action=add");
    var urlVariables:URLVariables=new URLVariables();
    urlVariables.itemCode="AC0DD53E5757C9F774629F9937513499";
    urlRequest.data=urlVariables;
    urlRequest.method=URLRequestMethod.POST
    urlLoader.dataFormat = URLLoaderDataFormat.VARIABLES;
    urlLoader.send(urlRequest);
              // Este exemplo exibe as palavras "Mouse clicado" no painel Saída.
              trace("Mouse clicado")
              // Encerrar seu código personalizado

  • Why am I having issues with the image button?

    Good day everyone!
    I am working on creating a business card template so that people can add their images of themselves and write in their own information. I was reading the Ted Padova book (for version 5 or 6) and I was excited when he said to use the image button to create variable image data and this would work with reader, standard and professional.
    I had sent the file to my clients and those who have reader cannot change the images at all but standard and professional can make changes.
    I have already checked to make sure that the rights for acrobat reader was in use.
    DOES ANYONE HAVE SOME INSIGHT FOR ME?  I really could use the help!    

    I was just about to prepare that for you guys when I had a quick flash to try applying the background image directly to the table instead
    of a containing div. I'm sure there was a reason I used a containing div to begin with, but can't for the life of me remember why right now. I'm sure it'll hit me at some point and I'll probably be back here when it does, but so far eliminating the containing div altogether has produced the desired effect. =)

  • Need to know how to disconnect the camera Nikon Ds3 (USB cable) properly after uploading images through bridge-do not want to lose images on compact flash card.

    Need to know how to disconnect the camera Nikon Ds3 (USB cable) properly after uploading images through bridge…do not want to lose images on compact flash card.

    Give #navbar a width that is wide enough to hold all of the buttons within it.
    #navbar {
         width:####px;
    Replace #### with a pixel number large enough to hold the nav buttons.

  • W520 won't start: on/off button just flashes

    Help!
    Can't turn on w520. Power button flashes with 1s intervals
    From power off, when press then round on/off button, the following happens:
    1) power button starts flashing
    2) DVD drive makes its startup noise.
    3) power button continues flashing.
    At this point nothing works, have to pull power plug.
    No thinkpad splash logo, no way to get to bios.
    Have tried the following:
    1) removing power and battery for 10 mins
    2) pressing the power button 30 times with no power or battery.
    3) as above with 5s between presses.
    4) holding down power button for 20s
    5) removed all memory, msata , sata and DVD drive
    Nothing had an effect.
    Is it bricked?

    For completeness, the hardware maintenance manual may be obtained here:
    http://support.lenovo.com/en_US/guides-and-manuals/detail.page?LegacyDocID=MIGR-76854
    Below are snippets from the applicable pages in the pdf file, but I'd highly recommend having the full manual at hand, however possible, so that you can see better detail and any warnings.
    Regards.
    Spoiler (Highlight to read)
    1030
    1060-A
    1060-B
    1060-C
    1100-A
    1100-B
    1100-C
    1100-D
    1120
    1030
    1060-A
    1060-B
    1060-C
    1100-A
    1100-B
    1100-C
    1100-D
    1120
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Background image blew my flash file

    Hi Guys,
         hope someone could help me this time, i just have this question about my background image blowing up the size of my swf file. i have a 1000x600 canvas which has the same bg image, and when i publish it, my swf file has a size of 468kb, but when i remove the background image the file was reduced to 57kb.. the image was a png-24 326kb image, and its not the file in my flash that has this file size. just wondering wut happened that it gives that huge adjustment to the file?

    Recommendations:
    1) I believe the setInterval activity is what ends up breaking things.  Get rid of all the setInterval and clearInterval elements.  Just use setTimeout instead, which you won't have to worry about clearing.
    2) The file performance is likely suffering due to the size of the images versus the portions of them that actually get used.  Create/crop the images outside of Flash to the size they will be in the Flash file, optimize them, and then import them.  Also, if you combine all the elements that you animate at once together into one symbol (the text, background, and button), and animate that symbol instead of the different pieces separately, things will probably animate more smoothly as well.

  • SWIM Jobs show failed but all images are in flash

    I performed a software distribution on two different 3750 switch stacks using LMS 4.2.3 over a WAN link.
    The Job Report shows this:
    Copying c3750-ipbaselmk9-tar.122-55.SE4.tar from Software Repository to tftp-specific directory.
    Copied successfully to C:/CSCOpx/tftpboot/rep_sw_3381422663941666305
    Loading image file to flash device : rep_sw_3381422663941666305 --> flash1:c3750-ipbaselmk9-tar.122-55.SE4.tar using TFTP
    Error loading image to Flash. See C:\CSCOpx\files\rme\jobs\swim\5373\3750Stack_telnet.log for the output from the device on which the image transfer failed.
    Image Copy Operation Failed
    Device is unlocked.
    Device Upgrade Result : Failed
    However, when I look at the flash on both stacks, the IOS image with the correct filesize, folders, etc. all looks right. The show boot shows it will boot to the correct image. The telnet.log file shows all the files being copied and just ends after the last file (the .bin image).
    Does anyone know why this might report as failed even though the files are in flash?
    I have not yet reloaded either switch as they are in production.
    Thanks.

    OK I reloaded one of the stacks and it came up fine.
    Could this error be due to the fact that the upgrade was done over a WAN link and I did not put exec-timeout 0 0 on the line vty?

  • "Save image" button of Camera Raw does not save JPEG with modifications made.

    I am using Bridge CC to process my RAW images and make modifications to some JPEG images as well.  I have no need to further alter images in Photoshop at the moment, so I do all modifications in Camera Raw. After altering my images, I then press the "save image" button at the left bottom corner of Camera Raw and choose the settings to save in JPEG.  However, when I upload these JPEG images to a website or when I email them, the image is uploaded without the modifications I had done!  It seems to me that Camera Raw is saving JPEGs the same way it does for RAW images, in a non-destructive manner, only attaching instructions for the images to be displayed properly on Photoshop. But when I save an image in JPEG, I expect the image to be saved entirely with the modifications I made while still keeping the original RAW file.  What goes on then?  What is Camera Raw doing and how do I get to save a modified image in JPEG with Camera Raw?  Would you please explain?
    Many thanks for your help,
    Beza

    Hi,
    What version of camera raw and operating system are you using?

  • RE: [iPlanet-JATO] image button handling

    Hi Todd,
    from what I have seen so far on the Project they are just buttons on
    the page.
    In the interim, I modified RequestHandlingViewBase.acceptsRequest() to
    handle the matching of parameter and command child names.
    from
    if (request.getParameter(commands)!=null)
    return getCommandChildNames()[i];
    to
    if (request.getParameter(commands[i])!=null ||
    (request.getParameter(commands[i]+ ".x")!=null ))
    return getCommandChildNames()[i];
    This fixed the problem with the image buttons in our cases.
    Kostas
    -----Original Message-----
    From: Todd Fast
    Sent: 10/27/00 6:21 AM
    Subject: Re: [iPlanet-JATO] image button handling
    Hi Kostas--
    I wanted to get some feedback on the known issue of the
    handleXXXXRequest method not being fired for buttons which have
    images, due to the the browser submitting
    the pixel coordinates back to the server like this:
    Page1.ImageButton1.x=...
    Page1.ImageButton1.y=...
    As the ND conversion project we are currently working on heavily uses
    image buttons we would like to get and indication if and when a patch
    is planned for this.
    Our current work around is to remove the src attribute from the JATO
    tags in the JSPs.We are currently working on getting this fixed. One question--what is
    the
    relative type of usage of image buttons in your project? Are they just
    buttons on the page (view bean), or do they appear in tiled views as
    well?
    Todd
    [email protected]
    [Non-text portions of this message have been removed]

    OK, here's what I'm trying to do: We have, like you said, a menu
    page. The pages that it goes to and the number of links are all
    variable and read from the database. In NetD we were able to create
    URLs in the form
    pgXYZ?SPIDERSESSION=abcd
    so this is what I'm trying to replicate here. So the URL that works
    is
    pgContactUs?GXHC_GX_jst=fc7b7e61662d6164&GXHC_gx_session_id_=cc9c6dfa5
    601afa7
    which I interpreted to be the equivalent of the old Netd way. Our
    javascript also loads other frames of the page in the same manner.
    And I believe the URL-rewritten frame sources of a frameset look like
    this too.
    This all worked except for the timeout problem. In theory we could
    rewrite all URLs to go to a handler, but that would be...
    inconvenient.

  • How do I get a "transfer images" button to show up in the solution center?

    How do I get a "transfer images" button to show up in the solution center for my officejet 6500 709a on XP?
    Scan buttons are displayed and work, as does print.

    What installing the twain plug-in, you mean? Go to your applications folder. Find the Adobe Photoshop Elements 11 folder. Look in there for a folder called support files, then for a folder called optional plugins. In the Optional Plugins folder, there should be a folder called ImportModules. Just drag that from the Optional Plugins folder to the regular Plugins folder.
    This will be infinitely easier to do if you put your applications folder window into list view, not the default icon view. To do that, click this button at the top of the window:

  • How to make a fullscreen button for Flash Catalyst?

    Hey everyone.  I really hope someone can help me with this.  How can I make a fullscreen button in Flash Professional that would make my Flash Catalyst project go fullscreen?

    I'm sorry I really don't know Flash Catalyst as much as I'd like to. Designing interfaces is left up to me, no designers at my agency use Catalyst. Though this is the Flash forum so that's as much as I can tell you. I didn't know Catalyst didn't support basic scripts (I thought I read that it did).
    Ultimately, for a very cheap price you can do something like go to http://www.lynda.com/ and buy a membership. Dirt cheap compared to what you get. They offer many courses on all this stuff and I'm sure your answer would lie in one of the (nicely broken up by subject) video training videos.
    Just searching for Catalyst brings up a bunch of courses:
    http://www.lynda.com/search?q=catalyst&x=0&y=0
    edit:
    For instance I watched the essential CS5.5 training and I saw in 2 minutes flat that when you click on a button you should have an "Interactions" panel that lets you do things. If they didn't put fullscreen as an interaction that's another thing but I'm just pointing out it's very easy to learn how to do all sorts of things in video training. If you do not want to purchase a membership there just find a video you think would have the info in it and I'll watch it and let you know if it told me how to do it, and how to do it.

Maybe you are looking for