Image data in data template

Hi,
I'm using XMLP on EBS 11i.10.2
I need to print file attachment on rtf template (output: pdf). Data source is XMLP/BIP data template.
When I'm doing in my data template
<sqlStatement name="Q_GIF">
<![CDATA[SELECT file_data,
                                       file_content_type
                            FROM fnd_lobs
                 WHERE file_id = 163829]]>
</sqlStatement>
The XML output result is:
<G_GIF>
<GIF_FILE_DATA />
<GIF_FILE_CONTENT_DATA>image/gif</GIF_FILE_CONTENT_DATA>
</G_GIF>
How can I bring the gif data into the data template?
Thanks,
Karmit

Hi mankuji,
Have you tried the suggestion from stackoverflow?
Personally I thought this behavior related with virtualization, as another workaround you can try with ListBox instead of LongListSelector.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • How to embed my name within multiple image's EXIF data at once-Bridge CS3

    I've been trying to figure out how to do this for some time and just can't understand how to get my images both Raw and JPEGs to show my name in the EXIF copyright or author entry when entering it in the "File Info" dialog box so it shows up viewing EXIF data using EXIF Viewer or within Bridge CS3.
    Can I get some help on this? Point me to a tutorial or something?
    I've already read Bridge Help and it's worded in such a way that isn't very clear to me on how to do this.
    Thank you for your help on this.

    Let me see if I understand this correctly. That "Digital Workflow 1" pdf told me to uncheck all IPTC boxes which is opposite what you just said.
    You are free to create the workflow that suits you, check or uncheck IPTC in Bridge prefs is only a way to organize the view in the metadata panel, not adding or deleting info from it.
    So I'm suppose to enter my name in the IPTC Contact-"Creator" entry section within the "File Info" dialog box of a selected image/images within Bridge CS3 and check the IPTC boxes in the Metadata section of Bridge's Preferences dialog box to turn them on so my name I entered as "Creator" in "File Info"/IPTC can be seen in the Metadata placard Bridge work space interface but does NOT guarantee my name will be EMBEDED IN THE EXIF of the selected image/images?
    As above, all info you add to IPTC and apply to an image is embedded in the exif and xmp data of that file, no matter if the boxes are checked or unchecked for visibility in metadata panel.
    IOW checking the IPTC boxes in Bridge's Metadata Preferences is just for previewing within Metadata Placard work space interface in Bridge? I'm using Filmstrip view as a Bridge work space BTW.
    Yes. And consider an other workspace for metadata, I attach some screenshots from my workspace I crerated myself in Bridge using the prefs and drag and drop with panels. It is from Bridge CS4 and apart from the top pathbar it is basicly the same as CS3.
    Filmstrip is very nice for sorting with big preview but not the best for adding metadata. You can create as many workspace as you like and you can easily switch between them (in CS3 use the number buttons bottom right.
    To actually embed my name entered as "Creator" in "File Info" IPTC section in a selected image/image's EXIF data I have to apply a custom made template to the image/images already residing on the hard drive and viewed in Bridge OR append the IPTC data within the EXIF of the image/images upon import from camera CF card reader through Bridge's "Get Photos From Camera" drop down menu. Correct?
    Yes, I have choosen for the last option because now all my downloaded files have this template in it and I don't have to bother later. No matter if the files are keepers or not. You only have to create a template once. See also a screenshot from the info I filled to the template but it is up to you what you like to appear in there.
    Another question, what is the difference between the "Description" section where you can enter "Author" (which would be my name) and the IPTC Contact section where you can enter "Creator" (again, my name) both within "File Info" dialog box?
    check this wikipedia info about IPTC:
    http://en.wikipedia.org/wiki/International_Press_Telecommunications_Council
    Another question, I just selected a batch of images within a folder in Bridge and tried to create a Metadata Template and it shows a blank box with a statement at the bottom "Only checked properties will be added/changed to this template"...and below this "Properties selected: 0". What and where are checked properties? Does that mean I have to check the IPTC boxes in Bridge's Metadata Preferences?
    Don't know that. You should first create a template without selecting multiple files. After you saved this template select the files you want to change and click on the append template option.
    I have to wonder how and why another photographer would need all this nested clutter to accommodate alternate workflows on something as simple as input/output processing on a batch of images. It's beyond my understanding. This just seems way too complicated to have to sort out. Just my opinion.
    Nothing is ever that simple as it seems....

  • How can we get Dynamic columns and data with RTF Templates in BI Publisher

    How can we get Dynamic columns and data with RTf Templates.
    My requirement is :
    create table xxinv_item_pei_taginfo(item_id number,
    Organization_id number,
    item varchar2(4000),
    record_type varchar2(4000),
    record_value CLOB,
    State varchar2(4000));
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'USES','fever','TX');
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'HOW TO USE','one tablet daily','TX');
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'SIDE EFFECTS','XYZ','TX');
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'DRUG INTERACTION','ABC','TX');
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'OVERDOSE','Go and see doctor','TX');
    insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'NOTES','Take after meal','TX');
    select * from xxinv_item_pei_taginfo;
    Item id Org Id Item Record_type Record_value State
    493991     224     1265-D30     USES     fever     TX
    493991     224     1265-D30     HOW TO USE     one tablet daily     TX
    493991     224     1265-D30     SIDE EFFECTS     XYZ     TX
    493991     224     1265-D30     DRUG INTERACTION     ABC     TX
    493991     224     1265-D30     OVERDOSE      Go and see doctor     TX
    493991     224     1265-D30     NOTES     Take after meal     TX
    Above is my data
    I have to fetch the record_type from a lookup where I can have any of the record type, sometime USES, HOW TO USE, SIDE EFFECTS and sometimes some other set of record types
    In my report I have to get these record typpes as field name dynamically whichever is available in that lookup and record values against them.
    its a BI Publisher report.
    please suggest

    if you have data in db then you can create xml with needed structure
    and so you can create bip report
    do you have errors or .... ?

  • When I create a calendar, in iphoto 8, I had an information pane lower left corner with date and time of the picture. Can it possibly be that the iphoto developers forgot about that in iphoto 9? This was very helpful when placing images according to date.

    Today I updated to the latest iphoto version. The update itself went smooth and nice as one is used to from Apple. But when I wanted to finish my already started calendar, I have encountered two problems. The first is that I can't view the aperture library anymore directly from iphoto. Instead I have to open the iphtoto library in aperture but then my calendar isn't there. So now I have to copy images back and forth. No problem.
    However, the old iphoto had a small information area in the lower left corner which was very nice to place images on an exact date. This seems to be gone...?? Really? How am I supposed to sort images according to date and time when I have to back to the library view every time? That's not very convenient..Or am I missing something?
    Thanks for ANY help!
    Patrick

    The first is that I can't view the aperture library anymore directly from iphoto.
    THat is exceeding strange since iPhoto '08 could not open or share an Aperture library - that ability was first introduced in iPhoto '11 - with the latest version of iPhoto and or Aperture you can open the same library with either application - http://support.apple.com/kb/HT5043
    In the current version of iPhoto the photos are sorted by date in the film strip - I've not recently done a calendar so do not remember the specifics -
    LN

  • Write data to excel template

    Dear all,
    I would like to write data to excel template using POI. What can I do? Please help me. Thank a lot!
    Regards,
    kzyo

    Today's mantra is: "google is our friend"
    Repeat that to yourself several times as you exhale slowly. Through mediation, a solution to your problem will come to you.

  • Insertion of image in the data base - Help-me!!!!

    hello for all..., Well, somebody has some example of insertion of image in the data base saw upload, using JSP (Scriptlets)?
    or some example that I can insert in the bank the name of the image, and the image in a directory!???????
    Thank�s!

    if u r using sql server then u can define a column as TEXT and insert the file as binayr data, along with that u can store the file name.
    While retirving u can creat a fileiputstream and read the binary data and displya the image in the browser.
    Another way is to use upload servlet and store the image files in the server hard drive and store the image name and path in datbase .

  • Best Practice Question - Data Def and Template setup

    EBS provides reports and templates. As expected the template did not fit our needs and the data objects did not include all the elements required. I've built custom objects for both (thanks to help from the forum).
    Should the templates and data definitions be setup under their corresponding application or under the custom application (ie PO vs XX )?
    In my case if I setup the data definition and template under the XX application then all the EBS OAF web pages dont show my new reports. I'd have to also build OAF extensions to show custom reports (seems stupid).
    Is there any negative impacts of registering custom data definition and templates under their corresponding applications (like Purchasing, Inventory)? Or is there a better way that I'm missing?

    not really. I would make it work by anymeans neccessary. The problem you are experience I've had issues with too.
    The concurrent program and has to be the same as template application, same for for the data definition.
    Ike Wiggins
    http://bipublisher.blogspot.com

  • ASAP Data Migration / Data Conversion / Data Transfer Templates

    Hi,
    I'm looking for the ASAP Data Migration / Data Conversion / Data Transfer Templates that used to be available in ASAP.
    Some time I ago, and I believe it was on this site and can no longer find it, I found a zip file which contained the above .xls template to manage all the data conversions on a project. Also included was the data mapping template .xls
    Many thanks.

    Hi,
    I'm looking for the ASAP Data Migration / Data Conversion / Data Transfer Templates that used to be available in ASAP.
    Some time I ago, and I believe it was on this site and can no longer find it, I found a zip file which contained the above .xls template to manage all the data conversions on a project. Also included was the data mapping template .xls
    Many thanks.

  • Errors while rebuilding library: Master images found in data folders.

    After an upgrade that wreaked havoc on my iPhoto library, I'm now using iPhoto Library Manager to rebuild the library based on a recommendation by Terence.
    Out of 5000+ photos, the error log showed about 360 missing images. But when I searched inside the iPhoto library package, I found virtually all of the supposedly missing images, sometimes in what appeared to be the correct place, and sometimes in data folders. (And yes, the images in the data folders were the full-size images, not thumbnails.)
    Two questions: Is there some known issue that would scatter image files into the wrong folders like this? And is there some way to have either iPhoto or iPhoto Library Manager seek and import out these misplaced images? When I did the rebuild, I selected the "scavenge" option, but that obviously didn't find everything.
    Thanks.

    No - iPhoto has no ability to move an image nor does IPLM
    No idea how you situation occured - it has never been reported here - most like is user action but no way to know
    and no neither iPhoot nor IPLM can find and import those imagesI sugget going back to the backup from before the upgrade and looking at the library - if things are in the right places - rebuild the older library with IPLM and then upgrade it
    LN

  • HELP! "Image Date" = "Created Date" + 12 hrs Why?

    Over Christmas and New Year's Eve, I took a number of images with a Kodak C663 digital camera. I am quite pleased with the camera, however, when I import the images, some of the images have Image Dates 12 hours later than the creation date.
    i.e.
    Image Date: 12/31/2006 12:15:50 AM MST (CA)
    Created Date: 12/30/2006 12:15:50 PM MST (CA)
    The error in the Image date does not occur on all images, and the date on the camera was not change during that period. Quite perplexing.
    Is there a way to correct the actual Image Date so that I can have the correct information in Aperture. I understand Timeature will change the date in Aperture Database, but I do not want that. I want to correct the actual data in the image file.
    Any help will be greatly appreciated.
    TIA
    * BTW - I can easily correct the image date in iPhoto, and the change does seem to carry over when I import the iPhoto Rolls to Aperture. So, as a workaround, if the image date is know to be wrong, importing into iPhoto and then into Aperture, may be a kludgy way to correct an images date.
    Dual G5 2.5 GHz Dual Core, 2.5 GB RAM, 500 GB HDD   Mac OS X (10.4.7)   iLife 06, Final Cut Studio

    As mentioned, previously, I am going with the iPhoto re-dating ability to resolve problems with Creation date. It seems to be the most reliable as I can address each photo's time shift.
    Ta
    Gary

  • Images ..... Image Manager Vs Data manger

    Hi All,
    would like to know the how Image manager and Data manager are connected........pls clarify
    ex. If I upload an image thru Image manager........perform some actions on the image, will this image be available when I log in thru Data Manage? If yes, how can I see this thru data manager.
    pls explain.
    regards,
    VV

    Hi Venu,
    Image manager is an Exclusive client to work with Images associated with master data within SAP-MDM.
    Although you have the featute of uploading Images in MDM Console and working on them in the MDM Data manager client.
    The number of enrichments you can do on the images and the extend to which you can develope the images are few.
    So MDM has provided the MDM Image manager to work with Images in a more detailed fashion.For this you will have to install the Image Manager client separately and work with it.
    It will be more useful when you are using the master data as a catalog item with images attached with them.
    Hope It Helped
    Thanks
    Yugandhar

  • Displaying images along with data on downloading from excel

    Hi All,
    I need to show images along with data in the excel sheet when user clicks downld to excel button.  Is there possible way to show the images in excel sheet if, kindly help.
    Thanks & Regards
    Jaspreet Kaur

    Hi Vinod
    Basically I have a report which needs to be downloaded to excel sheet. For each record there is a particular image in the first column for ex say my colums are img, desc.  Now image column contains an image corresponding to each description.  If its a file, a folder image is there; if its a document, a page image is there etc.  Now i am can display the data of  text fields  in the following manner ie label =new Label(0,RowCount, wdContext.nodeVn_PortalExcel().getVn_PortalExcelElementAt(i).getVa_Role(), PortalRoleDataFormat);
    PortalReportsheet.addCell(label);
    but how do i display the image in the excel sheet?
    Is it possible to do so, if so please provide assistance.
    Thanks & Regards
    Jaspreet Kaur

  • Recouping Images of the Data base - URGENTE!!!!

    I am not obtaining to recoup the image of the data base, this thus appearing <img src="java.io.ByteArrayInputStream@a8a81c">....
    The code that I am using is the following one...
    Somebody can me help...?????
    <%@ page import="java.sql.*" import="java.io.InputStream" import="java.awt.*" import=" java.io.ByteArrayOutputStream" %>
    <%
    Class.forName( "com.mysql.jdbc.Driver" ).newInstance();
    Connection conn = DriverManager.getConnection( "jdbc:mysql://localhost/imagens?user=root&pass=" );
    Statement stmt = conn.createStatement();
    ResultSet rs = stmt.executeQuery( "SELECT * FROM imagens WHERE ImgCod = 1 " );
    Image myImage = null;
    rs.next();
    InputStream stream = rs.getBinaryStream("ImgArq");
    ByteArrayOutputStream output = new ByteArrayOutputStream();
    int a1 = stream.read();
    while (a1 >= 0) {
    output.write((char)a1);
    a1 = stream.read();
    myImage = Toolkit.getDefaultToolkit().createImage(output.toByteArray());
    %>
    Imagem:<img src="<%=stream%>"><br>
    <%
    %>

    Two problems:
    1) The "src" of the img tag is the location of an image file,
    usually a .gif or .jpeg file. It is not the actual source code of
    the image.
    2) I do not think you can use the awt from within a JSP. What you will
    probably have to do is create an awt applet that will draw your image
    and embed the applet within your JSP.

  • Upload Image for Master Data Product - SAP CRM GUI

    Hi,
    I see in DEMOS image for master data product TX  COMMPR01, when you open transaction image is in top of the screen with the other data.
    I create a new product and add an image in Tab Document, however image only is load when I pushed botton preview.
    Some idea?
    Regards,

    Hi Wilbert,
    Well it should work if you have loaded the image at the right place in the Tab Document. Please verify the same.
    What I did to check this :-
    Go to Tab Document -> follow the tree structure Document -> Picture -> Full Size.
    The Right click on Full Size ->create -> Document -> Import. And I imported a picture form my desktop. I did the same for Thumbnail. I can see the image in the top right corner of the screen in TX COMMPR01.
    Also In order to view the complete picture I just Right click on the file name -> Document -> Display and I can see the full picture.
    <b>Reward points if it helps!!</b>
    Best regards,
    Vikash.

  • Precalculated data vs. precalculated templates

    What are the pros/cons of Precalculated data vs. precalculated templates and when is it best to use one over the other?

    Hi,
    pre-calculated value sets -
    1.  when analyzing target groups since you can specify a fixed value.
    2.  when complex selections are involved such as with a Top n inquiry, used to strongly improve query performance.
    3.  In place of variables that are filled from a query event (replaced from a query event).
    pre-calculated Web template -
       The Reporting Agent allows you to pre-calculate Web templates, that is, HTML documents with BW-specific placeholders, in the background. In the Web browser, if you call up a Web report that is structured on the basis of a pre-calculated Web template, you can access pre-calculated data without having to execute an OLAP query. This means that access time is considerably reduced as is the workload on the application server.
    Hope this helps
    AP

  • Does FND_PROGRAM.delete_program remove data definition and templates?

    I want to delete a concurrent program and all related records (including data definition and templates) from a development region. Does FND_PROGRAM.delete_program remove all records or will I end up with orphaned records? If records are left behind, which tables would I need to clean up?
    Thanks for your help,
    Tam.

    Just use conditional tunnel mode.
    Something like this:
    Beginner? Try LabVIEW Basics
    Sharing bits of code? Try Snippets or LAVA Code Capture Tool
    Have you tried Quick Drop?, Visit QD Community.

Maybe you are looking for