Image detection with out template matching

Hi
Is there any way to detect image with out template matching. Currently i am trying with binary morphology (using particle analysis) but my results are not consistent. I have to detect different type of stamps on envelopes.
regards

Hi..Mazhar .
Yes, you can do this in different ways will suggest you the best way after uploading your image here.
Sasi.
Certified LabVIEW Associate Developer
If you can DREAM it, You can DO it - Walt Disney

Similar Messages

Crop a background image (movie) - working with a template

I'm working with the template "Promo > Product Shot". The image block with the bike is what I want to replace with my own video clip.
I can't figure out how to replace it, so I took the video clip and "placed" it. That's all fine, but now I want the size of the video clip to match the size of the bike block. I can scale it down to get close but then I'd have to crop the sides to get the vertical block shape.
Can't figure out how to do this either. Is it even possible?
Thank you very much,
Eric P

Thank you for the speedy reply.
I played with that tab a little but didn't understand exactly what it was so I never followed through with it.
I did follow your steps, but nothing happened. Perhaps there is something I have to do after selecting the movie?
Thank you,
Eric

I need help with the shape matching of this image

I am currently using NI Vision Assisstant to help me with the logic for the VI code. So currently I have 3 diagonal rectangles and I cannot figure out how to find the shape of each of them. Attached is a screenshot of the image I have. I have it going through a Luminosity filter and then a frequency filter and then I converted it to a binary image... now I am at this point: If anyone could help me find the rectangles... that would be greatly appreciated. I am sorry for such a basic quesiton.
Thank you,
Yousuf M. Soliman
Attachments:
Test.png ‏19 KB

Hello Yousuf,
There are quite a few functions that you might find useful for locating rectangles in a binarized image. Possibilities include Shape Matching, Pattern Matching, Geometric Matching, Shape Detection, and more. The difficulty that you will run into is the fact that your retangles are not straight edged, but are also not curved edges. Many of the shape matching tools look for straight edges and right angles, which are not present in your image. As such, it may be easiest to first use edge detecting tools to locate your edges, then use measurement tools to calculate area or distance.
I played around with your image briefly, and was able to localize the edges to within an approximation. I used the Clamp (Rake) tool to achieve the edge localization seen in the attached screen shots. As you can see in ClampRect.png, the edge lines drawn aren't terribly accurate, but the other images show the points used, and with some playing around you should be able to find a better approximation of the rectangle edge. Hope this helps!
Patrick
CLA
Attachments:
ClampRect.PNG ‏47 KB
ClampLongEdge.PNG ‏55 KB
ClampShortEdge.PNG ‏47 KB

Within the budget template; how would one create an entire year worth of a budget; with out having to create a separate page for each month?

Help!
Loving the budget template, but I would like to be able to create an entire years worth of a buget with out creating a whole new transaction/budget page for each month. How do I get the new transaction to identify a new budget chart?
Thanks, Emily

Emily,
No need to think the budget template is only for one month. Just keep typing the date in the date column of the "Transactions" sheet and the details will update. You should adjust the budget categories to match the duration of time you want to use.
If you do want month-by-month, then you can switch to the "Transactions" sheet, select the table, cut
then switch back to the "Budget" sheet, paste.
Now rename the "Budget" sheet something like "Budget Jan 2014", and delete the "Transactions" sheet. Set the budget for Jan in the column I highlighted above. The subsequent months, duplicate the monthly budget:
Then adjust the the entries in the transactions table inside this sheet.

Is there a way of moving imported images in lR4 from mac HDD to and EX HDD with out loosing LR4 data

Hi
i've managed to fill my mack up with images as i imported all my photos to the MAC HDD rather than an external HDD,,,school boy error :\ (but i am new to lightroom)
as there's 30,000+ is there a way of moving them with out having to reload them to the new HDD? i only found out my mistake when the computer was running on 1% memory...doh!
Thanks for any advice
Andy

In your operating system, move the photos to wherever you want them to be (keeping the folder tree structure the same), and then in Lightroom re-link via http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

The photos in my IPhoto have all become mini-thumbnails and I can't open or edit them. When I print the image it comes out normal size. How do I get the thumbnails back to the standard size and be able to work with them?

The photos in my IPhoto have all become mini-thumbnails and I can't open or edit them. When I print the image it comes out normal size. How do I get the thumbnails back to the standard size and be able to work with the photo files?

What version of iPhoto and system are you running? On the guess that you're running the latest iPhoto, 9.4.2, Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the thumnails, Option #2.
2 - It may take 2-3 attempts so don't give up after only one attempt.
OT

I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

You mean an image such as a scanned document?
If that is the case, the file doesn't contain any text for Reader Out Loud to read. In order to fix that, you would need an application such as Adobe Acrobat that does Optical Character Recognition to convert the images to actual text.
You can also try to export the file as a Word document or something else using ExportPDF which I believe offers OCR and is cheaper than Acrobat.

How to get the line in the template (smartform) with out using under score

Hi,
     How to get the line in the template (smartform) with out using under score,
     and how to print the box (line the check box - small squre box (which is used ot mark the tick by the user in front of the item).
     Please provide the valueble answer as early as possible.
Thanks,
Ravi

Hi Ravi,
Line -
Use a SMATSTYLE for this purpose.in the smartstyle create a paragraph or character with underline atribute.Then call the smartstyle in the text.
Search SDN with Key <b>UNDERSCORE</b>.. will get few more posts on the same.
For Checkbox - refer link
Re: Quick Question on Smartforms
Re: putting tick mark into check box in smartform
Reward points if this Helps.
Manish
Message was edited by:
        Manish Kumar

Image files with large pixel dimensions display out of focus in a Bridge viewer?

I Create image files with pixel dimensions 2048x1365. When I display these files from Bridge on my Mac, either by pressing the space bar or in a slideshow, the images are out of focus. If I left click or click/hold and move the images slightly on screen they display in sharp focus. Unfortunately, although landscape-orientation images display correctly with no change in position or size, portrait-orientation files are enlarged and display with top and bottom off the screen. The pixel dimensions of my monitor are 2450x1600 so, yes, if portrait images are displayed at 100% they should display off screen, but this does not excuse the out of focus display of landscape files on this large screen. Nor does this explain why the portrait files are out of focus when they fit on screen. When the same files open in a Camera Raw window they are in focus. When they open in Photoshop at 100% the files are in focus.

Hi, Clay. Photoshop.com has its own forum, so you might want to post this there:
http://forums.adobe.com/community/photoshopdotcom

I am working in pages with a template and want to keep the image but get rid of the black background?

I am working in pages with a template and want to keep the image but get rid of the black background?

Surprise surprise but we can't see what you are looking at and referring to.
What black background?
If it is black background in the actual photo:
Menu > Format > Instant Alpha > drag the cursor over the colored background you wish to remove
Peter

Image swaps with fade out and in

I am new to Dreamweaver, in fact only got into it to do my
own website. I want to create image swaps with a fade out and then
fade in with the new image. Nowhere can I find out how to do this
so far. Can anybody point me in the right direction. Many thanks
for your help now and in the past.
Perspectivist

This is a multi-part message in MIME format.
--------------000605070301090808040601
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
i see! well, that's good to know. i didn't realize you could
do
transitions on image swaps (of course, i've rarely used them
so far).
and i just assumed the OP was actually trying to do a
slideshow, which
could still be the case i guess. i suppose he's covered
either way!
Nancy O wrote:
> There are several image transition scripts on this page:
>
http://www.brothercake.com/site/resources/scripts/transitions/
>
>
>
> --Nancy O.
> Alt-Web Design & Publishing
> www.alt-web.com
>
>
>
> "Perspectivist" <[email protected]>
wrote in message
> news:[email protected]...
>
>> I am new to Dreamweaver, in fact only got into it to
do my own website. I
>>
> want
>
>> to create image swaps with a fade out and then fade
in with the new image.
>> Nowhere can I find out how to do this so far. Can
anybody point me in the
>> right direction. Many thanks for your help now and
in the past.
>>
>> Perspectivist
>>
>>
>
>
>
--------------000605070301090808040601
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
i see! well, that's good to know. i didn't realize you could
do
transitions on image swaps (of course, i've rarely used them
so far).
and i just assumed the OP was actually trying to do a
slideshow, which
could still be the case i guess. i suppose he's covered
either way!<br>
<br>
Nancy O wrote:
<blockquote cite="mid:[email protected]"
type="cite">
<pre wrap="">There are several image transition
scripts on this page:
<a class="moz-txt-link-freetext" href="
http://www.brothercake.com/site/resources/scripts/transitions/">http://www.brothercake.com /site/resources/scripts/transitions/</a>
--Nancy O.
Alt-Web Design & Publishing
<a class="moz-txt-link-abbreviated" href="
http://www.alt-web.com">www.alt-web.com</a>
"Perspectivist" <a class="moz-txt-link-rfc2396E"
href="mailto:[email protected]"><[email protected]></a>
wrote in message
<a class="moz-txt-link-freetext"
href="news:[email protected]">news:[email protected]</a >...
</pre>
<blockquote type="cite">
<pre wrap="">I am new to Dreamweaver, in fact only got
into it to do my own website. I
</pre>
</blockquote>
<pre wrap="">want
</pre>
<blockquote type="cite">
<pre wrap="">to create image swaps with a fade out and
then fade in with the new image.
Nowhere can I find out how to do this so far. Can anybody
point me in the
right direction. Many thanks for your help now and in the
past.
Perspectivist
</pre>
</blockquote>
<pre wrap="">
</pre>
</blockquote>
</body>
</html>
--------------000605070301090808040601--

Can I purchase and turn on iTunes match from my iPhone 5 with out a computer? And if so how?

Can I purchase and turn on iTunes Match from my iPhone 5 with out a computer? And if so how?

You can't do it from your phone. If they are iTunes purchased songs then you should be able to copy them to your laptop via File > Devices > Transfer Purchases. For music from other sources, anf i you haven't got them on your backup of your library, then you will need a third-party program on your computer to copy them back - there are some listed half-way down this page which might work : https://discussions.apple.com/docs/DOC-3991
You might also find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141

Hi, I have a Catalyst 6500 with X6K-SUP2-2ge, the IOS and bootlader image been wiped out, it starts in ROMmon SP mod end can't switch to RP to start download the IOS using Xmodem, though it shouldn't work in ROMmon SP omde but the xmodem is not gving the

Hi, I have a Catalyst 6500 with X6K-SUP2-2ge, the IOS and bootlader image been wiped out, it starts in ROMmon SP modw and I can't switch to RP to start download the IOS using Xmodem, though Xmodem shouldn't work in ROMmon SP mode but the it's not gving the
not executable message, the slot0: and disk0: are not accessable can't see the files inside, when I try the dir slot0: or dir disk0: it says it can't be opened and when I try to boot from them there's noting as well, what can I do to load an IOS image to the booflash: or slot0: ,each time I load the image using Xmodem at the end it gives me *** System received a Software forced crash ***
signal=0x17, code=0x5, context=0x0
When I run the command:
rommom1> boot bootflash:
boot: cannot determine first file name on deice "bootflash:"
rommon2> boot slot0:
boot: cannot open "slot0:"
boot: cannot dtermine first file name on device "slot0:"
BTW System Bootstrap, version 7.1
I''m looking to format the PCMCIA using a PC and format it to FAT16 and copy the boot image into it and then try to load from the PCMCIA afterward if it works I'll format it using the Supervisor engine 2.
Any one have another new idea I can use, thanks in advance

This is a potentially complex issue.
Is this SUP configured to run as IOS native or CatOS Hybrid?
While in ROMMON can you do the 'dev' command and see whad drives are recognized. Then 'dir' the drives that the SUP recognizes.
Can you provide the screen captures as it boots?
You would be bette served by hacing a TAC case.

Image displaying with blocked out areas

Hi - I am new to these forums so I hope this is the right place for this. I downloaded an image of a web template to look at the colours more closely before possibly purchasing it and when I opened the image in CS4 it had a bunch of triangular blocked out areas - kind of like a mask of some sort I think. I then tried creating a new document and opening an existing, unrelated PSD file and now they have the same triangular blocked out areas. Help please!!!

Sorry for the delay - I tried uninstalling and reinstalling without success... I also opened a different pre-existing .PSD and it had a different display issue than this one. The image below is from a new document creation, but the same pattern still showed up in a document that I had initially opened.
4

Call form with out broken image icon

Question: How can fit the tags of a <form> into a small
cell without the tags causing misalingment in the table?
I need to put a PayPal button on my site. The shopping cart I
was using up until now used only a link so I simply used hotspots
on button images. This new PayPal button sends information from my
site to PayPal with a <form>. The problem I am having is with
the elements in the red dotted form box ( yellow tags and broken
image icon). I have made the yellow tags invisible but the grey
broken image icon won't fit into the small cell( 86x22 ) of my
sites menu bar with out misaligning the table of cells. I spent
considerable time building my menu bar from layers so I would like
to keep intact.
The gray broken image icon shows because PayPal requires
that you copy the button image location directly from the browser
webpage <input type="image" src="
http://www.glotosleep.com/images_2007/img_buy_now_paypal.gif"
Thank You for any help. I am sure there is a simple solution
I just was not able find it anywhere on the net.
my site is www,glotosleep.com and the button i would like to
link to the PayPal form is the "Buy Now" in the menu bar

Question: How can fit the tags of a <form> into a small
cell without the tags causing misalingment in the table?
I need to put a PayPal button on my site. The shopping cart I
was using up until now used only a link so I simply used hotspots
on button images. This new PayPal button sends information from my
site to PayPal with a <form>. The problem I am having is with
the elements in the red dotted form box ( yellow tags and broken
image icon). I have made the yellow tags invisible but the grey
broken image icon won't fit into the small cell( 86x22 ) of my
sites menu bar with out misaligning the table of cells. I spent
considerable time building my menu bar from layers so I would like
to keep intact.
The gray broken image icon shows because PayPal requires
that you copy the button image location directly from the browser
webpage <input type="image" src="
http://www.glotosleep.com/images_2007/img_buy_now_paypal.gif"
Thank You for any help. I am sure there is a simple solution
I just was not able find it anywhere on the net.
my site is www,glotosleep.com and the button i would like to
link to the PayPal form is the "Buy Now" in the menu bar

Image detection with out template matching

Similar Messages

Maybe you are looking for