Image is not printing in PrintAdvanceDataGrid when the PrintAdvanceDataGrid was added to Vbox

I tried to print the image in the PrintAdvance Data Grid , image is not priniting when the PrintAdvanceDataGrid was added to Vbox or Vgroup, can any one help?

Images are loaded asynchronously, so they appear after the page is sent to the printer. Using an image cache should help.
-Alex

Similar Messages

Wmi script to find out the time when the user was added to local administration group

Hi Friends,
i need a script/query based on wmi/wql that find out the time when the user was added to local administration group on this computer
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

WMI does not keep security information.
Unless you have enabled auditing, this information is not retained in any way.
If auditing is enabled, you can write a powershell script to look for the specific event in the eventlog. More specifically, you should look for all security events with id 4732 containing the group.
this one command does the trick
get-eventlog -logname security -instanceid 4732 -message *administrators*
https://technet.microsoft.com/en-us/library/dd772663(v=ws.10).aspx
MCP/MCSA/MCTS/MCITP

Not printing full 6x4 when set to print 6x4 leaving at least 1/2" blank at the end answers please

not printing full 6x4 when set to 6x4 leaving at least 1/2" at the ends un printed this is bad any answers to solve this problem please have tried looking on hp but cannot find a answeer to the problem.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Some images do not print when in printed documentation

I have been encountering this problem for over a year now...
I maintain over 20 projects in RoboHelp HTML. I have numerous
printed document layouts defined. However, in what appears to be
random situations, some of my images do not print. They display
online just fine, but they are not visible in the printed
documentation. Only a blank gap displays where the image should
display. And there is no conditional build tag applied to any of
these images. The reason I think it is random is because, if I
perform the following test, the images print just fine:
- duplicate the printed documentation layout
- remove, from the duplicate copy, all of the pages
surrounding a page that contains an image that does not print
- generate the duplicate copy

I had a similar problem with missing images. I never really
solved it, but it (apparently) went away. One thing which helped
was ensuring that none of my images had filenames containing
spaces.
In addition, selecting Link images rather than Embed can be
useful; missing images are then replaced by a red cross which makes
it easier to locate the problem.
Also, in Word, you should uncheck Tools > Options >
Print > Update Fields (that is for Word 2003).
--- Derek

Officejet 6100 - H611a Will not print in grayscale when color cartridge is depleted.

The title says it all. - Windows 7 64-bit
Officejet 6100 - H611a Will not print in grayscale when color cartridge is depleted!
Even though the documentation that came with the printer says it will. After 2+ hours on the phone with HP support over the course of 2 days, I have been informed that printer WILL NOT print in black ink only if a color cartridge is empty.
I thought anyone who purchases this model should know the documents included lie.
From page 31 of the Officejet 6100 user manual: "If a color cartridge is depleted, the printer will print in grayscale using the black cartridge." LIES!
The HP Help Programs says the same thing.
I have hard-reset the printer, removed and reinserted all the cartridges, set the options to "black ink only," Nothing worked. 3 HP reps all said the same thing, "You have to get a new magenta cartridge."
Will be retuning for a refund as I purchased this model SPECIFICALLY because the manual said it would print the grayscale without color ink present.
Have had 4 HP printers over the years, never even considered buying anything except HP. This will be my last HP printer. Extremely disappointed by HP's deception.

Sorry the printer did not perform as expected. I have escalated this in an effort to get this to the right people.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

TS1365 My Macbook Pro 17" 2.44ghz all of a sudden one day decided to not boot up. When the power button is pressed the sleep light in the front on the latch release turns on and there is a small running sound but it never boots up and the screen never lig

My Macbook Pro 17" 2.44ghz all of a sudden one day decided to not boot up. When the power button is pressed the sleep light in the front on the latch release turns on and there is a small running sound but it never boots up and the screen never lights up. Anyone else have this problem? Any ideas?
I'd love to repair it but not if it'll cost 500 bucks or more to replace the logicboard.
I appreciate any help
Michael

Lao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands.

Printing is unclear and black lettering does not print at all when I use my PC

I have an all in one 4500 wirless G521n Printer. It prints perfect from my tablet E Print but when I print from my computer the black ink does not print and the color text print does not print fully. All the settings are correct according to the HP scan. Any help would be greatly appreciated.

MON IMPRIMANTE HP DESKJET 1510 IMPRIME UNE PAGE BLANCHE. j'AI UTILISÉ LE TRUC "DESKJET 6980 SERIES ET ÇA NE FONCTIONNE PAS PLUS.mES CARTOUCHES SONT D'ORIGINE ET MON IMPRIMANTE DIT LE CONTRAIRE ET DOUTE DE L'AUTHENCITÉ. QUOI FAIRE À PART LA JETER ET EN ACHETER D'UNE AUTRE MARQUE ?????JE N'UTILISE PAS BEAUCOUP ET JE NE VOIS PAS QU'ON ME DISE QUE L'ENCRE EST ÉPUISÉE.SUNNYBOYCAN

Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

Error: The e-mail server could not be reached when the system was trying to

Dear All,
I've configured the Mail Transport in Portal successfully with SMTP as MS Exchange Server and Third-party Mailing servers. But due to some licensing issues a new MS Exchange mail server have been setup replacing the existing ones.
And when i configure the Mail Transport in the system i get the below message on the eMail Window:
"Error: The e-mail server could not be reached when the system was trying to send the message!
javax.mail.MessaginException: 530 5.7.1 Client ws not authenticated
I've configured (all the steps) the same way as i used to before and restarted the server as well! Please let me know the issue to be resolved, the telnet to the mailserver is also successful. I've try'd searching SDN, didn't find the exact solution... any notes on this?
Thanks,
MS

Hi,
It will depend on your infrastructure, I am not sure and have limited knowledge on netowrks, but in my current landscape both the system were in same domain, but still i had to maintain proxy configuration.
Since it giving authentication error, it feel it could be proxy error.
Please refer below links which talks about same error :
http://java.sun.com/products/javamail/FAQ.html#smtpauth
Or else i think it is issue with port.
Regards,
Jigar Oza
Edited by: jigar oza on Jul 6, 2010 12:43 PM

Bought drakes new album and connected my ipod to my computer. When the ipod was trying to sync a box popped up that read Ipod cannot be synced because there is not enough free space to hold all of the items in the itunes library (additional 142.2 mb)

bought drakes new album and connected my ipod to my computer. When the ipod was trying to sync, a box popped up that read Ipod cannot be synced because there is not enough free space to hold all of the items in the itunes library (additional 142.2 mb required)

Hi Terri 4514,
If you are having a "free space" alert when you try to sync, you may find the following article helpful:
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
Regards,
- Brenden

Hello - I live in the UAE and my itunes account is regsitered here. Unfortunately the choice of music is not as good as when my account was registered in the UK. I cannot register my account in the UK as my bank details are all in the UAE now. HELP!

Hello - I live in the UAE and my itunes account is regsitered here. Unfortunately the choice of music is not as good as when my account was registered in the UK. I cannot register my account in the UK as my bank details are all in the UAE now. HELP!

Sorry, but no help is possible. You can only use the UAE iTunes Store, and Apple can only offer what content they are able to license for sale in that country. You'll have to look elsewhere for content. Whether there are any other download stores able to sell in the UAE I don't know. You may need to purchased CDs and import them into iTunes.
Regards.

Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore. Now I have a black screen with the Apple logo and the circle lines. None of the buttons respond. Help, please!!

Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore. Now I have a black screen with the Apple logo and the circle lines. None of the buttons respond. Help, please!!

Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Maybe this will let the iPad reboot and then you may need to restore again but see if this helps to start the iPad first.

I clicked on an upgrade box and when the upgrade was done my ipad wanted my passcode to open it up. I have not had to use a passcode to open up my ipad since I set it up and cannot remember the passcode. Every time I try a passcode it disables

I clicked on an upgrade box on my ipad and when the upgrade was done my ipad wanted my passcode to open it back up. I have not had to use a passcode to open up my ipad since I set it up and cannot remember the passcode. Every time I try a passcode it disables for longer and longer. It is now disabling for an hour at a time.

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

[svn] 2692: Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out .

Revision: 2692
Author: [email protected]
Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
Log Message:
Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
QA: Yes
Doc: No
Checkintests: Pass
Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-227
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
blazeds/branches/3.0.x/qa/build.xml

Revision: 2692
Author: [email protected]
Date: 2008-07-31 13:05:35 -0700 (Thu, 31 Jul 2008)
Log Message:
Bug: BLZ-227 - When using JMS Destination, MessageClient and FlexClient not released from memory when the session times out.
QA: Yes
Doc: No
Checkintests: Pass
Details: Fixed a memory leak with JMS adapter. Also a minor tweak to QA build file to not to start the server if the server is already running.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-227
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java
blazeds/branches/3.0.x/qa/build.xml

I used the Nik filter collection as a trial version on Elements 12 on MacOS10.9. When the trial was up, the purchased version is not allowed to work. Any suggestions. I've uninstalled everything aand cleaned out all the NIK files from the libraries.

I used the Nik filter collection as a trial version on Elements 12 on MacOS10.9. When the trial was up, the purchased version is not allowed to work. Any suggestions. I've uninstalled everything aand cleaned out all the NIK files from the libraries.

To Mickey: I got the 2 RAR files into one directory, extracted the part1.rar file, and in that new folder there is a file called start.html. I opened this, and followed the links on the right, from "Welcome" to "Getting Started". After all this I had the SAP Management Console, as well as the Database Manager applications created. You will find the specific instructions for setting up the MaxDB under the "Getting Started" link. After setting up the Database Manager you have to start it up with a user-id and password which was created during the set-up, and specifically link the database to the NSP system. I seem to remember that this didn't work at first, because the Database Manager shortcut does not run the program as an administrator. So run it as an administrator! I altered the shortcut's properties under the shortcut/advanced so it will always run the program as an administrator, and haven't had any problems - once you have done the "Add" procedure you may never need to re-visit the database manager.
Edited by: Paul Wright on Jan 8, 2009 2:03 PM

Image is not printing in PrintAdvanceDataGrid when the PrintAdvanceDataGrid was added to Vbox

Similar Messages

Maybe you are looking for