Image Locations Change After Saving from Template

I am using DW CS5. I have made a Template using a dozen or so images. There are four in a side nav bar. When I create a new page (Page from Template), all my images and text show up fine with code like: <img src="images/wedding.jpg"/>. However the two of the four images in the nav bar show the code linking it to its place on my local drive. The other two work fine. I tried publishing the page and the code didn't change. No matter what I try the code will not update for those images.
Any help appreciated.

That worked for that page!
I am ready to make multiple pages from the template. Should I use a different method than "New Page from Template" since that doesn't seem to work properly? I don't want to have to manually apply the template to every page if I don't have to.
Thanks.

Similar Messages

Profit Center should not change after copying from Template

Hi,
I have a scenario wherein there is an operative project which has a profit center maintained at the project definition level. I copy the WBS structure on to the 2nd level from a template which has a different profit center maintained at the WBS level. My requirement is that the profit center maintained in the template should remain as it is after i copy the template to the operative project.
As of now after copying the template the profit center changes to the one maintained at the project definition level after i save the operative project. Is there a way by which i can restrict the system from copying the profit center maintained at the project definition level to the 2nd level WBS (which is copied from the template)?
Regards,
Gokul

Hi Mohamed,
Thanks for your response but i already checked that note and it seems that it doesn't cater to my requirement. Presently i am checking with my ABAPer if we can use some user exit and get this done which i think will require considerable amount of time. In case you have any other suggestions please suggest.
@ Abdul Khader : - I already tried all the possibilities using substitution. Would appreciate if you could suggest something else.
Regards,
Gokul

Image size changes after saving and then reopening

I'm using CS6. For example I change the image size to a 4X6 and then save it. Then when I open the file it will be 7.5X5. What's the fix? Thanks for your time.

I'm using Photoshop CS6 on a Windows 7 - 64 bit system. I'm using the Image Size dialog box and saving the file as a 4X6 at 300 dpi from a psd file to a jpeg file. When I open the file it is 5X7.5 inches at 240 dpi. I've been playing with it and have just figured out that when I save the file as a psd file it stays the size I've created and it changes when I save as a jpeg file. This is change is recent. It's worked properly in the past. Thanks for your help.
Steve

CS5 indd files occasionally change after saving and reopening

Occasionally the contents of my InDesign document will change after saving and re-opening. No errors reported during the save however when the file is opened a text box may be out of place or leading may be messed-up on a few random pages or some of the recent changes may not have been saved. Any ideas?

There was no direct indication that you created the code in a standard module. I asked because you reported that the code works in the sample workbook that you downloaded but not in your own workbook.
I don't know what else to suggest at the moment.
Could you create a stripped-down copy of the workbook (without sensitive information) and make it available through one of the websites that let you upload and share a file, such as Windows Live SkyDrive (https://skydrive.live.com),
FileDropper (http://filedropper.com) or DropBox (http://www.dropbox.com). Then post a link to the uploaded and shared file here.
Or register at www.eileenslounge.com (it's free) and post a message in the Excel forum. You can attach files up to 250 KB to a post there (zipped if necessary).
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Illustrator cc image looks pixelated after saving with transparent background

as the title states; image looks pixelated after saving with transparent background...
i created a logo in adobe illustrator cc and i wanted to saved it for web in order to be able to copy and paste the logo where ever I wanted but the image looks extremely pixelated after saving as an png, and for web. Is there a solution for this?
Any help is appreciated.
Thank you!!
Jon

What DPI did you save as:
You should always save as 300dpi, then you can always reduce the size as needed.
Another thing, don't copy and paste, that always causes that Problem.
In Acrobat you should open Tools Menu click on Content Editing the Add Image.
Then click on image and choose Properties and place where you want and size as you desire.

"Rendering: settings changed" after saving changes from Bridge

I have LR 2.6 on my Mac. I import RAW images through LR, let LR build 1:1 previews. Once the import has finished & previews are built, LR moves from image to image fine. I then do my basic edits, deletions, and do a batch renumber.
Next I go to Bridge to make my adjustments in the RAW window without opening the files. I go back to LR, save the changes, allowing the Bridge changes to overwrite the LR development import presets in the xmp files.
It usually takes LR a while to save all the changes, but eventually it does it. However, here is my issue. No matter how much time I give LR to render new previews, I don't think it does, at least not until I go to Library mode double click an image to view larger (to fit the window). When I go from image to image, it takes a few seconds while displaying the message "Rendering: settings changed..." Now, this is not necessarily right after I save the changes, but it still happens weeks later- whenever I go to view those images. Does LR not automatically re-render the previews after development changes have been made and saved to LR?
And if not, how would I force LR to do it for that catalog, or for all my images?
Thanks,
R

Robert Ripps wrote:
A fair question- one, when I have tried, LR is way slower on my Mac G5 than doing it in Bridge, which is slow itself. I just launched LR, had an open folder with 303 images in it which I had already rendered previews of, then clicked on Develop module- it took 13 seconds to go to that module & finish "loading". Yes, a new commuter would solve many problems <g>, but until then....
What you may need is more RAM. Or do you have other applications working in the background 13 seconds to build a preview!!!!! Using a old Macbook with 1.2 GB RAM an it does it faster than that!LR doesn't require a lot of power from a machine...it does need as much RAM as you can stick in a machine and the fastest disks you can use...but if it is taking 13 seconds to build a single preview then it isn't really worth using IMO
Why not make all you RAW adjustments in Lightroom Develop module. The raw processing engine is the same as ACR and you can choose "auto save changes to xmp" in the preferences.
Ah, bingo. That works, abet slowly (see above). Okay, I will just have to remember to manually do that once I save changes to LR from xmp data. I guess I thought LR would be smart enugh to do that itself, but I guess not. And again, I find it faster to go back & forths, even with an extra step.
LR can be set to automatically write any changes to xmp, it doesn't have to be done manually (set this in preferences) you just have the choice. It won't read changes made in other applications automatically as this would be a very bad idea..it would after all over write the LR database. So if you do want to over write the LR database you must activly choose to do so.
.

Desktop Image Arbitrarily Changes Upon Reboot From Aurora to Water

I leave my MacMini on 24/7 and tend to restart only after installing updates or new apps. This past week I must have restarted about 3 times and each time the desktop background image has changed to 'Water' even though it was previously set to 'Aurora'. I change it back and then it's fine, until the next restart.
I'm at a loss as to what may be causing this. However, I tend to use Back to my Mac a lot (to control my mini desktop through screen sharing on my MBP) and it seems a strange coincidence that my Mini's desktop defaults to the Water background, which just so happens to be the desktop image on my MBP. Weird huh?
Has anyone else experienced this?

Alas, this didn't work. I made a copy of the com.apple.desktop.plist and saved a copy onto my desktop. I logged off then back on and Aurora was still there. Great. However, when I restarted my mini it changed to water upon.
Anyother ideas - thanks.

Image links aren't updating from template

If I create a page from template, not all the image links are updating, more specifically, mouse over event links are not updating. Is there anything I need to change to get these links to change from the template? I'm using Dreamweaver CS6

<img src="../images/robin_tour_n.png"
onmouseover="this.src='../images/robin_tour_o.png'"
onmouseout="this.src='../images/robin_tour_n.png'" />
This part updates: <img src="../images/robin_tour_n.png"
But this part doesn't:
onmouseover="this.src='../images/robin_tour_o.png'"
onmouseout="this.src='../images/robin_tour_n.png'" />

Image size changing upon saving.

I'm working on digital negatives for school and right before saving the image, it is 8.07M. But after saving the image and looking at the image info, it says 4.9M. Why is it saving my image to a smaller image?

The image size does not change, you're talking about the file size.
And the file size depends on the file type, the contents, the compression options used, etc.

Report Layout Changed After Upgrade from 4.6C to ECC6

Dear Gurus,
I do functional test of every process in ECC6 after upgrade from 4.6C. I found all report layout changed without variant (it's happen to all Query/SQ01 reports ). So I've to assign manually the fields for the reports, and create a default variant then.
Why it happen ? Is there configuration or setting missed or this is standard while we do upgrade ?
Thx in advance.
Tri Wicaksono

We do re arrange for all ALV report ...

Image Quality Changes After First Preview

I've only been using Aperture for a few weeks but seem to have a problem when I preview any newly imported RAW images.
After I import any new RAW files, I'll select one for preview and for no more then a second the image looks great. Then all of a sudden the quality/brightness/sharpness reduces in front of me.
This only happens the once for each image, after that all images remain at this lower quality once previewed.
It's almost like Aperture is processing the image when I click to preview, but not in a good way.
It there a setting I should be looking for? I thought Aperture processed the image at the point of import, not when you first preview the image?

There can be other causes for this effect than are described above. On the 5DMK3, if you have the in-camera Picture Styles set to anything other than Standard or Neutral, the Picture Style will be applied to the JPEG but Aperture's Raw converter will not apply the Picture Style adjustments when it processes the image. Thus you will see some kind of shift in colour and/or contrast.
So either shoot only in JPEG mode if you want the Picture Styles applied to your images, or change the camera Picture Style to Standard or Neutral.

The synth pad sound Warm Pad has changed after upgrading from Logic Express 7 to Logic Studio

Hello!
I have composed a lot of songs over the years using Logic Express 7, and my favourite synth pad sound there was a sound called Warm Pad (from the EXS24 Sampler).
A half a year ago I upgraded to Logic Studio, mainly because I needed WaveBurner. Happily, all my songs sounded exactly the same after the upgrade, except from 1 sound: The synth pad sound Warm Pad. It still got the same name and location, but the sound was replaced with a very sharp and much more distinct sound (not warm at all, in my ears at least).
I have tried to replace it with different synth pad sounds from the EXS24 Sampler, and the one I find to come most close to the old Warm Pad from Logic Express, is a synth pad sound called Pad 1. Still, I don’t think it sound exactly the same.
So, in order to finish all my songs and make an album, I ask you for help:
1. Do you know how I can get EXACTLY the same sound as the old Warm Pad Logic Express, with my new Logic Studio?
2. Have you experienced the same with sounds, after upgrading from one Logic version to a newer one? And what have you done to find back to the old sounds?
I will be VERY thankful for help, because I am not a genius in the mysterious (but yet exiting) world of synthesizer synthesis.
Best regards,
Asle
Composer, guitarist and entrepreneur
Norway

I have the boxed version of logic studio.
When you install, if you pick the "ad hoc" installation you can add the logic7 patches to your existing patches.
I think running installation again you should be able to install just that.

Color change after exporting from Lightroom

I noticed a drastic color change after exporting a file from Lightroom to a JPEG file today. I have been using Lightroom for a while, and it never happened before. I am assuming that I changed the setting somehow and I cannot find how to fix it.
Here is the original.
After exporting to a JPEG. The color is so drastically different. I tried both sRGB and AdobeRGB and they turn out to have the same problem.
It is not as clear as JPEG files, but edited files with Photoshop CS5 also looks slightly different viewed on Lightroom.
I would appreciate it if anyone could help me. Thank you so much for your help!

Thanks everyone for looking into my problem!
>Can you upload a sample of each
>* Raw File
>* XMP Sidecar
>* Exported JPEG
I somehow can't find XMP sidecar files in my folders.... So instead, I exported the JPEG file to the 2nd JPEG file, hoping you can compare those two JPEG files.
The colors get lighter and lighter every time I export the files. I uploaded those files (RAW, 1st JPEG, 2nd JPEG) on line. I also changed the file samples from the original post because I can't add watermarks.
I checked my flles, but there is no preset applied to the JPEGs.
I am thinking of unistallng Lightroom and reinstalling it and see what happens.
Thanks!
1. The data of the RAW file: http://yuko-hirao-photo.hechtmail.com/others/DSC00530.ARW
2. Data of the GPEG exported from the RAW: http://yuko-hirao-photo.hechtmail.com/others/DSC00530test_upload_01.jpg
3. Data of the JPEG exported from above JPEG: http://yuko-hirao-photo.hechtmail.com/others/DSC00530test_upload_01test_upload_01.jpg

I don't see my images on Photo after migration from iPhoto

i recently purchased an iMac, which uses Photo, and don't see my photos after migration from an older mac which has iPhoto. I see the event folders and the photo count but there's no actual image! Help.

Is it here?
http://www.imore.com/yes-camera-roll-gone-ios-8-heres-where-it-went-and-why

How to migrate changed Business Scenarios from Template Project to Solution

SAP Solution Manager - How to migrate changes in Business Scenarios from Template Project to Solution?
Our Global ASAP strategy is based upon a Template Project, Implementation Project, Maintenance Project and Solution with Business Scenarios.
Changes in the Template Project for existing and new Business Sceanarios, etc. are correctly executed. Up till now we have successfully implemented our Template Project and secondly extended our Business Scenarios from 4 to 14. Our 3rd upcoming change will be changes on Business Scenarios as well. These planned changes for the Business Scenarios need to be consistent, possibly without manual intervention.
During a Proof of Concept (PoC) in our Sandbox (SXB) we have identified a possible serious problem when trying to publish these changes in Business Scenarios in the Template Project to the Solution. SAP Solution Manager (SSM) does not seem to support a scenario where Business Scenarios in the Solution can be refreshed or updated with changed Business Scenarios in the Template Project.
We have identified 2 possibillities:
1.     Manual project upgrade
1.1.     Synchronize the changes for the Template Project normally;
1.2.     Delete the changed Business Scenarios from step 1.1 in the Solution;
1.3.     Add the changed Business Scenarios from step 1.1 into the Solution.
For this scenario we foresee a big problem because all Content and Issues connected to the old Solution Business Scenarios loose their coupling with the Solution.
For the Content this may not be a real problem because the Content is also available in the Template Project.
However the Issues are loosely coupled to the Solution Scenarios and therefore need to be coupled manually to these processes.
2.     Manual changes using Maintenance Project
2.1.     Synchronize the changes for the Template Project normally;
2.2.     Publish all changes from step 2.1 in the Template Project
2.3.     Add all new Content from step 2.1 to the structure of the Maintenance Project;
2.4.     Relocate Content and Issues when the Business Scenario has been relocated.
Because SSM does not support this activity we need to delete this Business Scenario first and secondly re-create it again on the correct spot.
Our question: How has SAP done this in other customer projects?
We need to have a working solution by the end of March, 2009.
Best regards,
Peter Hendriksen

Peter,
Did you get an anwer to this question from SAP?
Rgds,
Eamonn.

Image Locations Change After Saving from Template

Similar Messages

Maybe you are looking for