"Image not Found" error with Show Thumbnails
Using Dreamweaver's ADDT "Show Thumbnail" server behavior, I get an "image not found" error. The thumbnail has been created because I can see in on the remote server. I am new at this, please help!
>>
And If I change the "File List Recordset" to get images subfolders related to a rename rule, {dogs_images_recordset.id_dog) I get an image displayed, but its always the same image and corresponds only to one record (the first of the display list)
>>
I´m now trying to understand your scenario -- so if I get it right, the file list recordset retrieves the correct image folder
(assuming you´re passing the dynamic folder name from e.g. an URL variable "id_dog"), but just displays one image rather than looping through all images in that directory ? However, can you please post the code of the page containing the file list recordset ?
Günter Schenk
Adobe Community Expert, Dreamweaver
Similar Messages
-
Desktops get "Server Not Found" errors with WRT160N
I'm sharing my WRT160N with 2 laptops and 3 desktops. My laptops connect to the internet ok... drops now and then tho... but my desktops frequently get a "Server Not Found" error. After repeated "try again" clicks, it eventually connects again. Any ideas??
Try this ;
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
Under the Setup Tab...reduce the MTU value to 1300 and save settings.
Also reduce the card speed of the dekstop... (assuming it is window XP)..Click on the Start button >>> Control Panel >> Network Connections >> Right click on the ""Local Area Connection"" icon and select properties-Here click on the "Configure" button- Click on the "Advanced" tab- In the "Property" box highlight Link speed and duplex/Connection type/Network or Media type- And in the "Value" box select 10 Mbps half duplex/ 10 base T/10 base half mode and click on OK.. Now restart the computer. -
Getting a file not found error with jam pack instruments
Since Logic Express no longer works with the current Mac OS X versions, I'm trying to get used to using GarageBand again while I save up to buy the full Logic Package. I had purchased all of the jam packs years ago and recently also purchased Main Stage. Now, when I go to use, for example, an instrument from the Orchestral jam pack, I get a message saying "EXS24 instrument “Cellos.exs”: Audio file “VC-L_legato_f_C2.wav” not found!" with the option to continue or search again. Clicking "search again" always ends up with the same message. This is driving me nuts! Pretty ****** off right now that I can't use what I paid money for. Isn't this stuff supposed to "just work"? Or did that die with Steve Jobs?
same Problem: Working with OS X 10.6.8 on a MacBookPro Santa Rosa and Logic Pro: Its not possible to use the cello.exs 'cos missing audio file “VC-L_legato_f_C2.wav”, same problem with Basses.exs (missing KB-L_legato_f_A#1.wav) and the Piano. All this broken Instruments are from the Jam pack Orchestra Library.
-
File Not Found Error with FlashHelp
When I deploy and launch my FlashHelp project I get a "Not
Found The requested resource was not found." error in the topic
pane. I'm also not able to reference any of the topics from the TOC
and get the same error.
I just upgraded to RoboHelp v6 and all of this worked fine
when the project was generated using the previous version of
RoboHelp (5).
Does anyone know what changed that might be causing the
problem?Hello,
I am having a similar problem. Did you find a solution?
Thank you,
Melissa
"arunak" <[email protected]> wrote:
>
Hi Pratim,
I am also facing the same problem. can u please let me know whenever
u get the
solution for this.
Regards,
Arunak
Pratim <[email protected]> wrote:
Hi,
I'm writing a web service on weblogic 8.1 with weblogic workshop.Ihave
to use log4j-1.2.7 supplied by client with my application.I cannot write
ant script manually.Also I cannot change server start script or cannot
put any command line argument when the server starts.
Now I require this logger in my EJB.I have kept log4j.properties inthe
same path where my EJB's are.But the final ear produced does not contain
this log4j.properties and subsequently I get the error "log4j:ERROR
Could not read configuration file [log4j.properties]."
Please help me to resolve this problem so that log4j.properties goes
with the final .ear file and the ejb code finds the logger.
thanks,
pratim -
User not found error with Outlook Connector
Hi all
I am having some issues with the Outlook Connector (Version 7.1.222.4 JES2005Q4 running on Microsoft Outlook 2003) when trying to subscribe to a users calendar.
Details:
(SJES2005Q4)
Server 1 - Access Manager
Server 1 - Delegated Administrator
Server 2 - Directory Server 5.2
Server 3 - Messenger Server
Server 3 - Calendar Server
Server 3 - Access Manager SDK
Server 3 - Communications Express
Server 3 - Messenger Express
My setup works fine, I can subscribe to users calendars in Communications Express and modify/delete etc; however, when I try to subscribe to this same users calendar in Outlook I get the following error:
"User not found. Either enter the email id of the user OR click on Search and then click on Find to locate the user."
If I click on search, I get a list of my corporate directory, here I am able to select the user but again clicking ok gives the same result.
Looking at the logs it seems that the search at the point where I click ok is missing the "organizational unit" element of the user DN, logs below:
WHEN INITIATING SEARCH (not enterng userid; instead clicking on SEARCH in the ADD CALENDAR BOX)
[14/Feb/2006:11:23:06 +0000] conn=20255 op=-1 msgId=-1 - fd=175 slot=175 LDAP connection from 172.16.7.132 to 192.168.170.97
[14/Feb/2006:11:23:06 +0000] conn=20255 op=0 msgId=1 - BIND dn="uid=me,ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk" method=128 version=3
[14/Feb/2006:11:23:06 +0000] conn=20255 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=me,ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk"
[14/Feb/2006:11:23:06 +0000] conn=20255 op=1 msgId=2 - SRCH base="ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk" scope=2 filter="(&(mail=*)(cn=*))" attrs="cn mail uid objectClass"
[14/Feb/2006:11:23:06 +0000] conn=20255 op=1 msgId=2 - SORT cn (5)
[14/Feb/2006:11:23:06 +0000] conn=20255 op=1 msgId=2 - VLV 1:1:1:0 2:5 (0)
[14/Feb/2006:11:23:06 +0000] conn=20255 op=1 msgId=2 - RESULT err=0 tag=101 nentries=3 etime=0 notes=U
[14/Feb/2006:11:23:06 +0000] conn=20255 op=2 msgId=3 - SRCH base="ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk" scope=2 filter="(&(mail=*)(cn=*))" attrs="uid mail cn title company telephoneNumber physicalDeliveryOfficeName objectClass"
[14/Feb/2006:11:23:06 +0000] conn=20255 op=2 msgId=3 - SORT cn (5)
[14/Feb/2006:11:23:06 +0000] conn=20255 op=2 msgId=3 - VLV 0:4:0:0 1:5 (0)
[14/Feb/2006:11:23:07 +0000] conn=20255 op=2 msgId=3 - RESULT err=0 tag=101 nentries=5 etime=1 notes=U
NOW SELECTING USERID
[14/Feb/2006:11:23:50 +0000] conn=20255 op=3 msgId=4 - SRCH base="uid=testmail,ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk" scope=0 filter="(&(mail=*)(cn=*))" attrs="cn displayName givenName sn initials uid departmentNumber title homePhone mail manager mobile company pager secretary description facsimileTelephoneNumber l physicalDeliveryOfficeName postalCode st street c telephoneNumber mailAlternateAddress objectClass"
[14/Feb/2006:11:23:50 +0000] conn=20255 op=3 msgId=4 - RESULT err=0 tag=101 nentries=1 etime=0
PRESSING OK (WITH USER ID SELECTED)
[14/Feb/2006:11:24:20 +0000] conn=20256 op=-1 msgId=-1 - fd=225 slot=225 LDAP connection from 192.168.170.99 to 192.168.170.97
[14/Feb/2006:11:24:20 +0000] conn=20256 op=0 msgId=1 - BIND dn="" method=128 version=2
[14/Feb/2006:11:24:20 +0000] conn=20256 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn=""
[14/Feb/2006:11:24:20 +0000] conn=20256 op=1 msgId=2 - SRCH base="o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk" scope=2 filter="(uid=testmail)" attrs="cn uid mail givenName sn icsCalendar"
[14/Feb/2006:11:24:20 +0000] conn=20256 op=1 msgId=2 - RESULT err=0 tag=101 nentries=0 etime=0
[14/Feb/2006:11:24:20 +0000] conn=20256 op=2 msgId=3 - UNBIND
[14/Feb/2006:11:24:20 +0000] conn=20256 op=2 msgId=-1 - closing - U1
[14/Feb/2006:11:24:21 +0000] conn=20256 op=-1 msgId=-1 - closed.
NOW WHEN ENTERING USER ID DIRECTLY (that is NOT clicking on SEARCH in the ADD CALENDAR BOX)
[14/Feb/2006:11:25:16 +0000] conn=20257 op=-1 msgId=-1 - fd=225 slot=225 LDAP connection from 192.168.170.99 to 192.168.170.97
[14/Feb/2006:11:25:16 +0000] conn=20257 op=0 msgId=1 - BIND dn="" method=128 version=2
[14/Feb/2006:11:25:16 +0000] conn=20257 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn=""
[14/Feb/2006:11:25:16 +0000] conn=20257 op=1 msgId=2 - SRCH base="o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk" scope=2 filter="(uid=testmail)" attrs="cn uid mail givenName sn icsCalendar"
[14/Feb/2006:11:25:16 +0000] conn=20257 op=1 msgId=2 - RESULT err=0 tag=101 nentries=0 etime=0
[14/Feb/2006:11:25:16 +0000] conn=20257 op=2 msgId=3 - UNBIND
[14/Feb/2006:11:25:16 +0000] conn=20257 op=2 msgId=-1 - closing - U1
[14/Feb/2006:11:25:16 +0000] conn=20257 op=-1 msgId=-1 - closed.
OUTLOOK CONNECTOR LOGS
02/14/2006 11:25:16.223 (0x0e34) {Addin } [Error ]: wc /get_userprefs.wcap?userid=testmail&id=bo3bn0u68x8sb5rb&fmt-out=text%2Fcalendar
02/14/2006 11:25:16.223 (0x0e34) {Addin } [Error ]: wcap returned errno: 61
02/14/2006 11:25:16.223 (0x0e34) {Addin } [Warning]: LookUpUser getUserPropertiesByEmailID failed : Denied Access
Initially I thought that it maybe something to do with ACI but then the search parameters are not correct at the point of clicking ok.
My Outlook Connector deployment configuration for the "LDAP" tab is as follows:
Search base (root of LDAP directory): ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk
VLV Search filter: (&(mail=*)(cn=*))
Advanced search filter: (cn=%s*),(givenName=%s*),(sn=%s*),(title=%s*),(uid=%s*),(company=%s*),(departmentNumber=%s*),(physicalDeliveryOfficeName=%s*),(l=*%s*)
Name resolution filter: (&(mail=*)(|(mail=%s*)(|(cn=%s*)(|(sn=%s*)(givenName=%s*)))))
VLV sort attribute: cn
Search timeout after: 1minute
Maximum number of search results returned: 10
Require authentification (See Help for LDAP syntax examples): (User DN pattern) uid=%S,ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk
Retrieve user settings from LDAP (User DN pattern): uid=%S,ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk
Does anyone have any ideas?
Thanks
PS: This is also posted in the IMS mailing list, so apologises for duplication to people who visit both forums.The error was fixed by setting the "Authenticated proxy binding: service.wcap.userprefs.ldapproxyauth" to "yes", this is in the release notes as pointed out by Arnaud Quillaud.
Link: http://docs.sun.com/app/docs/doc/819-5200/6n7a49o0b?a=view -
Internet Explorer returns "Page not found error" with new laptop set up
I have a recently acquired Dell Latitude D600 with TrueMobile 1300 Wireless adapter running XP Pro Service Pack 2 and a BEFW11S4 Version 3 Wireless router. I can get the router and laptop to communicate to the point of retrieving an IP address and show that there is Excellent Signal. How ever when I launch IE i get the Page Not Found screen. Once or twice i've been able to connect to the Google Home Page, but it seems random.
I have used the ping command in a DOS window to ping yahoo.com and google.com. Most of the time I get a 50% or less successful ping. I have directly connected the laptop to the router and it works without problem and I have another computer running Home XP via a WPC11 adapter that I have been using for many years.
Anyone have any experience with this symptom or problem?hi , here is what u do , hardwire the PC to the router first....access the router using http://192.168.1.1 "admin" is the default passowrd.....go to the wireless section and ensure u have selected channel 11....save settings....then go to the advanced wireless settings and reduce the RTS and fragmentation threshold by 40 each....save settings....
-
Load: class not found error with sdk 1.4.1 demos
I have read through a ton of messages regarding this problem with Internet Explorer 6. The only one I saw that had a work around was to compile with javac -target 1.1 <filename>
This kind of makes having 1.4 moot doesn't it? Has anyone else figured out anything about this error? I get it just from running the demos or a hello world applet with IE6. No problems with Netscape or the appletviewer.
Thanks in advance...
happy developing.
gHave you configure IE6 to use the plug-in?
What is the HTML code like? What is the exact error message (i.e. what is the name of the class it says it did not found)? -
Gwdca.exe - Entry Point Not Found Error With Hot Patch 4
We've upgraded a few of our GroupWise 8 clients from 8.0.3 Hot Patch 3 to 8.0.3 Hot Patch 4 to address the critical security vulnerability in HP3. We receive the following error message (attached) every few minutes which seems to be related to the archving process.
Receiving gwdca.exe - entry point not found
The procedure entry point DAGetLinkedObjectParent could not be located in the dnyamic link library sccda.dll
When the error appears, it seems to correlate to the "Updating Archive Quickfinder Indexes" appearing in the bottom left corner of the GW client. Backreving the client to 8.0.3 HP 3 resolves the problem. We have tried running GW Check on the mailbox as well as forcing a reindex of the archive without any success. Any insight would be appreciated.
Thanks
JoshOriginally Posted by joshbilsky
We've upgraded a few of our GroupWise 8 clients from 8.0.3 Hot Patch 3 to 8.0.3 Hot Patch 4 to address the critical security vulnerability in HP3. We receive the following error message (attached) every few minutes which seems to be related to the archving process.
Receiving gwdca.exe - entry point not found
The procedure entry point DAGetLinkedObjectParent could not be located in the dnyamic link library sccda.dll
When the error appears, it seems to correlate to the "Updating Archive Quickfinder Indexes" appearing in the bottom left corner of the GW client. Backreving the client to 8.0.3 HP 3 resolves the problem. We have tried running GW Check on the mailbox as well as forcing a reindex of the archive without any success. Any insight would be appreciated.
Thanks
Josh
Duplicated and reported as defect #902940. -
File not found error with log4j.properties
Hi,
I'm writing a web service on weblogic 8.1 with weblogic workshop.I have to use log4j-1.2.7 supplied by client with my application.I cannot write ant script manually.Also I cannot change server start script or cannot put any command line argument when the server starts.
Now I require this logger in my EJB.I have kept log4j.properties in the same path where my EJB's are.But the final ear produced does not contain this log4j.properties and subsequently I get the error "log4j:ERROR Could not read configuration file [log4j.properties]."
Please help me to resolve this problem so that log4j.properties goes with the final .ear file and the ejb code finds the logger.
thanks,
pratimHello,
I am having a similar problem. Did you find a solution?
Thank you,
Melissa
"arunak" <[email protected]> wrote:
>
Hi Pratim,
I am also facing the same problem. can u please let me know whenever
u get the
solution for this.
Regards,
Arunak
Pratim <[email protected]> wrote:
Hi,
I'm writing a web service on weblogic 8.1 with weblogic workshop.Ihave
to use log4j-1.2.7 supplied by client with my application.I cannot write
ant script manually.Also I cannot change server start script or cannot
put any command line argument when the server starts.
Now I require this logger in my EJB.I have kept log4j.properties inthe
same path where my EJB's are.But the final ear produced does not contain
this log4j.properties and subsequently I get the error "log4j:ERROR
Could not read configuration file [log4j.properties]."
Please help me to resolve this problem so that log4j.properties goes
with the final .ear file and the ejb code finds the logger.
thanks,
pratim -
Eclipse plug-in error - driver not found error with DB2
Hi,
i am using websphere studio developer and the kodo 3.0 implementation.
I have set up the kodo plug in and i get an error when i try to create the
database schema:
kodo.util.FatalDataStoreException: No suitable driver
It can't find the DB2 driver. This is the information I have in the kodo
properties:
javax.jdo.option.ConnectionDriverName: COM.ibm.db2.jdbc.app.DB2Driver
javax.jdo.option.ConnectionURL: jdbc:db2:baokodo
The DB2 driver jar is in the kodo eclipse plugin directory and I am
referencing this jar file in the plugin xml file.The plug in is finding the driver class but it does not like the driver
for some reason. It tells me no suitable driver found.
Here is my plugin.xml:
<?xml version="1.0" encoding="UTF-8"?>
<plugin id="kodo"
name="%name"
version="1.0.1"
provider-name="%provider-name"
class="kodo.jdbc.integration.eclipse.KodoPlugin">
<runtime>
<library name="db2java.jar"/>
<library name="kodo-jdo.jar"/>
<library name="jakarta-commons-collections-2.1.jar"/>
<library name="jakarta-commons-lang-1.0.1.jar"/>
<library name="jakarta-commons-logging-1.0.3.jar"/>
<library name="jakarta-commons-pool-1.0.1.jar"/>
<library name="jakarta-regexp-1.1.jar"/>
<library name="jca1.0.jar"/>
<library name="jdbc2_0-stdext.jar"/>
<library name="jdo-1.0.1.jar"/>
<library name="jta-spec1_0_1.jar"/>
<library name="xalan.jar"/>
<library name="xercesImpl.jar"/>
<library name="xml-apis.jar"/>
<library name="jfreechart-0.9.13.jar"/>
<library name="jcommon-0.8.8.jar"/>
</runtime>
<requires>
<import plugin="org.eclipse.ui"/>
<import plugin="org.eclipse.core.resources"/>
<import plugin="org.eclipse.jdt.core"/>
<import plugin="org.eclipse.jdt.launching"/>
</requires>
<extension point="org.eclipse.ui.actionSets">
<actionSet id="kodo.jdbc.integration.eclipse.actionSet"
label="%action-set-name"
visible="true">
<menu id="kodo.menu"
label="%group-label">
<separator name="baseGroup"/>
</menu>
<action id="kodo.removeBuilder"
label="%remove-builder-label"
class="kodo.jdbc.integration.eclipse.RemoveBuilderAction"
tooltip="%remove-builder-tooltip"
menubarPath="kodo.menu/baseGroup"
enablesFor="1">
</action>
<action id="kodo.addbuilder"
label="%add-builder-label"
class="kodo.jdbc.integration.eclipse.AddBuilderAction"
tooltip="%add-builder-tooltip"
menubarPath="kodo.menu/baseGroup"
enablesFor="1">
</action>
<action id="kodo.mapping.build"
label="%mapping-build-label"
tooltip="%mapping-build-tooltip"
class="kodo.jdbc.integration.eclipse.MappingToolAction$BuildSchema"
icon="icons/BuildSchemaMappingTool.gif"
menubarPath="kodo.menu/baseGroup"
toolbarPath="Normal/Kodo"
enablesFor="1">
<selection class="org.eclipse.core.resources.IFile"
name="*.jdo">
</selection>
</action>
<action id="kodo.mapping.drop"
label="%mapping-drop-label"
tooltip="%mapping-drop-tooltip"
class="kodo.jdbc.integration.eclipse.MappingToolAction$Drop"
icon="icons/DropMappingTool.gif"
menubarPath="kodo.menu/baseGroup"
toolbarPath="Normal/Kodo"
enablesFor="1">
<selection class="org.eclipse.core.resources.IFile"
name="*.jdo">
</selection>
</action>
<action id="kodo.mapping.refresh"
label="%mapping-refresh-label"
tooltip="%mapping-refresh-tooltip"
class="kodo.jdbc.integration.eclipse.MappingToolAction$Refresh"
icon="icons/RefreshMappingTool.gif"
menubarPath="kodo.menu/baseGroup"
toolbarPath="Normal/Kodo"
enablesFor="1">
<selection class="org.eclipse.core.resources.IFile"
name="*.jdo">
</selection>
</action>
<action id="kodo.enhance"
label="%enhance-label"
icon="icons/EnhancerAction.gif"
class="kodo.jdbc.integration.eclipse.EnhancerAction"
tooltip="%enhance-tooltip"
menubarPath="kodo.menu/baseGroup"
toolbarPath="Normal/Kodo"
enablesFor="1">
<selection class="org.eclipse.core.resources.IFile"
name="*.jdo">
</selection>
</action>
</actionSet>
</extension>
<!-- lock our actions into the base perspective -->
<extension point="org.eclipse.ui.perspectiveExtensions">
<perspectiveExtension targetID="org.eclipse.ui.resourcePerspective">
<actionSet
id="kodo.jdbc.integration.eclipse.actionSet">
</actionSet>
</perspectiveExtension>
</extension>
<!-- put our extensions in -->
<extension point="org.eclipse.ui.preferencePages">
<page name="%preference-name"
class="kodo.jdbc.integration.eclipse.KodoPreferencePage"
id="kodo.jdbc.integration.eclipse.preferences.KodoPreferencePage">
</page>
</extension>
<!-- lock in our eclipse-generated xml editor -->
<extension point="org.eclipse.ui.editors">
<editor name="%mappingeditor-name" extensions="mapping"
icon="icons/mapping.gif"
contributorClass="org.eclipse.ui.texteditor.BasicTextEditorActionContributor"
class="kodo.jdbc.integration.eclipse.editor.XMLEditor"
id="kodo.jdbc.integration.eclipse.editor.XMLEditorMapping">
</editor>
<editor name="%editor-name" extensions="jdo,schema"
icon="icons/metadata.gif"
contributorClass="org.eclipse.ui.texteditor.BasicTextEditorActionContributor"
class="kodo.jdbc.integration.eclipse.editor.XMLEditor"
id="kodo.jdbc.integration.eclipse.editor.XMLEditor">
</editor>
</extension>
<!-- lock in our "view" -->
<extension point="org.eclipse.ui.views">
<view id="kodo.jdbc.integration.eclipse.KodoView"
name="%view-name"
category="org.eclipse.jdt.ui.java"
icon="icons/kodosmall.gif"
class="kodo.jdbc.integration.eclipse.KodoView">
</view>
</extension>
<!-- lock in our builder -->
<extension point="org.eclipse.core.resources.builders"
id="kodo.jdbc.integration.eclipse.EnhancerBuilder"
name="%builder-name">
<builder>
<run
class="kodo.jdbc.integration.eclipse.EnhancerBuilder">
</run>
</builder>
</extension>
<!-- put our view onto the bottom bar -->
<extension point="org.eclipse.ui.perspectiveExtensions">
<perspectiveExtension
targetID="org.eclipse.debug.ui.DebugPerspective">
<view id="kodo.jdbc.integration.eclipse.KodoView"
relative="org.eclipse.debug.ui.ExpressionView"
relationship="stack"/>
<viewShortcut id="org.eclipse.jdt.debug.ui.DisplayView"/>
</perspectiveExtension>
</extension>
</plugin>
Here is the kodo.properties file:
# Kodo JDO Properties configuration
# To evaluate or purchase a license key, visit http://www.solarmetric.com
kodo.LicenseKey: xxxxxxx
javax.jdo.PersistenceManagerFactoryClass:
kodo.jdbc.runtime.JDBCPersistenceManagerFactory
javax.jdo.option.ConnectionDriverName: COM.ibm.db2.jdbc.app.DB2Driver
javax.jdo.option.ConnectionUserName: db2admin
javax.jdo.option.ConnectionPassword: db2admin
javax.jdo.option.ConnectionURL: jdbc:db2:baokodo
javax.jdo.option.Optimistic: true
javax.jdo.option.RetainValues: true
javax.jdo.option.NontransactionalRead: true
# By default, Kodo stores object-relational mapping information in .mapping
# files. Other common options are storing the information in a special
# database table Kodo creates or as extensions in JDO metadata. Uncomment
# one of the properties below to use one of these options. See the
reference
# guide for a full list of mapping factories to choose from.
#kodo.jdbc.MappingFactory: db
#kodo.jdbc.MappingFactory: metadata
# Kodo provides a management / monitoring capability. It can be enabled
# locally (in the same JVM) by setting the kodo.ManagementUI property to
# "gui". Remote management / monitoring can be enabled by setting the
# kodo.ManagementServer property, and by running the remotemanagementtool
# in another process.
# kodo.ManagementUI: gui
# kodo.ManagementServer: true(host="localhost",port=1234)
Stephen Kim wrote:
Can you post your plugin.xml? We have tested against WebSphere Studio 4
and 5.
TD wrote:
I am specifying a properties file in the preferences pane.
Still not sure why this doesn't work...
Have you been able to get it to work in websphere studio.
Stephen Kim wrote:
The plugin does not use any kodo.properties by default. You have to
configure it through the Preferences pane (which you can point to your
kodo.properties file)
TD wrote:
Hi,
i am using websphere studio developer and the kodo 3.0 implementation.
I have set up the kodo plug in and i get an error when i try to create the
database schema:
kodo.util.FatalDataStoreException: No suitable driver
It can't find the DB2 driver. This is the information I have in the kodo
properties:
javax.jdo.option.ConnectionDriverName: COM.ibm.db2.jdbc.app.DB2Driver
javax.jdo.option.ConnectionURL: jdbc:db2:baokodo
The DB2 driver jar is in the kodo eclipse plugin directory and I am
referencing this jar file in the plugin xml file.
Steve Kim
[email protected]
SolarMetric Inc.
http://www.solarmetric.com
Steve Kim
[email protected]
SolarMetric Inc.
http://www.solarmetric.com -
"IDOC Metadata not Found" - Error with Business Connnector 4.7
I have been trying to get our 4.7 installation of Business Connector going after having all kinds of issues getting 3.5 to run as a service on Windows Server 2003.
I believe I am just about able to succesfully load the Idocs as I did in 3.5. However, when it gets to the inboundProcess step, I get an error saying "The IDOC Metadata for ORDERS05 is not available." I seem to be stuck at this point.
If anyone has any ideas on what I can do to get around this or fix this issue, I would really appreciate it. I am trying to load these IDOCS via ALE and I am getting this error just after the OutBoundProcess (ALE.java) step.
Thanks for any help you can give.
Damon HicksHi,
Did you configure the Tc.IDX2.
See the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/8a/b8b13bb3ace769e10000000a11402f/content.htm
Regards
Chilla -
Applescript Studio app crashes with link error (dyld) image not found
I've built a small Applescript studio app that works fine on the development machine but when I run it on other machines it crashes with a dyld error, specifically:
Link (dyld) error:
Library not loaded: /System/Library/PrivateFrameworks/ZeroLink.framework/Versions/A/ZeroLink
Referenced from: /Volumes/Discover Your Mac Spotlight movie/Table of Contents Viewer.app/Contents/MacOS/Table of Contents Viewer
Reason: image not found
Does any one know why this happens and how I can fix it?
Thanks very much in advance...
iMac G5 20 Mac OS X (10.4.2)Rick,
looks like you built the application in "Development" mode - switch the build style to "Deployment" and most probably things will be fine in the other machine.
Andreas -
Problems with cached previews and File Not Found errors in preview and build
I am having serious issues with Encore CS5.
When I try and build a preview or disk/image I am getting File Not Found errors. I have emptied the media cache in the preferences but my project still seems to be referencing previously cached files or rendered menus. Is there any way to manually delete previous previews or the cache. I know that there are no missing files in my project. Any help would be very much appreciated.
I am running Mac OS 10.6.4 and Encore 5.0To fix your locales, see http://wiki.archlinux.org/index.php/Configuring_locales -- in specific, you'll need to uncomment the en_US.utf8 locale at least, since that's the one that's specified in your rc.conf
-
Quicktime would fail to write/export to server windows share with "Error -43: file not found" errors
Summary:
With the combination of Windows 7 and Quicktime 7.x, Quicktime would fail to write/export to server windows share with "Couldn't create output movie storage" and "Error -43: file not found" errors
Steps to Reproduce:
Trying to render to Quicktime files using network shared folders as a destination:
Unable to open file. (-1610153459)
The funny thing: it only happens when there are at least two shared folders mapped on the workstation, and the destination folder used for the rendered movie is not the first one.
If we have only two mapped drives, F: and G: for example, and we try to render something to F:, everything works fine and no error is showed. But, when the destination is the G: drive, rendering never works, the error is showed, but a zero-byte file is created in F: (!!). ODD! If we remap F: drive with a different letter, but a letter BEFORE G:, the problem always happens. If we remap drive F: to any letter AFTER G:, making G: the first available network drive, rendering works. Also, simply unmapping F: and leaving G: as the only connected network folder makes render to work.
We do not have a D: drive in our Windows 7 workstations, they are all C: only.
It is a 100% reproducible problem. We tried with three different Active Directory networks and workstations. It has all of the features of a software bug.
Any help would be appreciated.
Cheers!
Expected Results:
Error -43: file not found
Actual Results:
The workaround seems to be to use the full path to the servers instead of the mapped mount point (ie //server/z/... instead of Z:/...
Regression:
All versions of quicktime 7 in combination with windows 7 client and more than one smb share point mapped in a letter.
Notes:
All software that uses quicktime movie exports showed this error.Not sure what file your are referencing? Thanks for your suggestion, however, it's not relavant.
It renders fine if you render to either the UNC path or the first mapped drive.
i.e. If you have two mapped drives G: and H:
they both point to \\fileserver\share1\folder
If you render to H: it will fail, if you render to G: it works! Same path, same user, same permissions.
The only difference is H comes after G, so it fails... BUG. If it was to do with anything else, underscores, permissions etc, it would fail on both. -
For the first time I cannot open my Excel. The report is saying:image not found, therefor the icon is showing on my desktop.
Before my Mac open with excel sheet, now it is not there anymore. I guess it it hiding somewhere. How to find it? As you can see I am not an IT . Please try to avoid hight tech wording.
Many thanks,
EvaHi Eva,
Open Console in Utilities & see if there are any clues or repeating messages when trying Excel.
Maybe you are looking for
-
Multiple Line Chart in BI Publisher
Hi All, I have a requirement where i have to display the time taken by concurrent programs in last week Say.. I have 3 concurrent programs ( I can have more also) and the data can be represented as below. ConcProg-1 ConcProg-2 ConcProg-3 Mon 1 min 2
-
Solution Manager technical monitoring.
Dear All, Is there a way to set an alert when the metrics in a system are grayed out? For Example : Regards Lukasz Goral
-
After several failed attempts to run my application Simple Mind, I resorted to deleting the app and reinstalling the software. I have tried restarting my computer, tried a new install and no matter what I get the following error: Process: Sim
-
Create one more instance in same database?
Hi All, Any one can u help me, How can create one more(second) instance in same database.please give the steps My environemnt is HP_UX 11.00 and Oracle 8i. Thanks in advanz ruby
-
Set Variable to Recordset column value
I want to set a new variable to value of a column in a recordset on the page. I tried this but the sytax is causing browser errors: <?php $myEndDate = $row_rs_getRenew['ordDateEnd'];?> This column in the recordset contains a subscription end date and