Image Tooltips Present both in Source and Output

Hi!
I have a tooltip problem in my RoboHelp projects. When hovering the image both in source and output the image source name is seen as a tooltip. Please, support! How can I remove them?
Thanks!

Double click the image and you will see a Screen Tip field in the Image Tab.
Please add this to the other thread where you have asked this question.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

Image coming from an xml source and on which we can't click...

Hi everybody !
Is it possible in LiveCycle Designer ES 8.2 (or in coming version of the software) to disable the click event on ImageField ?
I read that it is not possible yet but there is may be another solution to proceed to have an image coming from an xml source and on which we can't click.
Thanks.

Hi,
Yes , you can disable image field by setting acces value to readOnly.
Example:
imageField1.access = "readOnly";
It works for Adobe Reader 9
Best regards,
Paul Butenko

"The source and output audio channels are not compatible or a conversion does not exist" - ?

I'm trying to export from Premiere Pro for a f4v file that matches all source settings except resizing the video. I've done this a million times but today, when I hit EXPORT, I'm getting an error message from Adobe Media Encoder that says "the source and output audio channels are not compatible or a conversion does not exist." I'm using wav, mov and mts files in my audio tracks and everything plays happily in the timeline. Any ideas?
Thanks for any help!

Sounds like you unsuccessfully trying to output a 5.1 Master to a stereo or mono file. Or something along those lines.

Managing all the source and output files

We have built 100s of Captivate modules. Does anyone have a
recommendation on a good (reasonable $) digital asset management
system to manage all of this?

Hi again Scott
Ummm, okay. I'm still a bit at a loss as to what you are
looking for. I'm guessing you mean that you want some sort of a
system that would deal only with your source files. Only seen by
you or the development team?
On your initial post, I could see where you may have been
wanting something on either side. Either a way to manage many
different output files and present them as a cohesive whole to the
user. Or a way to manage the source content as you work with it.
So you aren't looking for source control per se, but
something more. Exactly what, we aren't sure. Perhaps try to
explain what you would like to see in such a system. Maybe if you
do that, someone here might see your list of desirable features and
recommend a system they have used before or are aware of that does
it.
Cheers... Rick

ATI Radeon drivers problems (both open-source and proprietary)

Hi 2 All!!
I have a problem with my ATI Radeon 9000-series. The open source drivers (xf86-video-ati) don't work very good for me, my monitor's fresh rate isn't "at-top" and the monitor projection is slightly translated to the right (say 8-12 pixels). So I've tried to build the official drivers with ABS, all is gone successfully, except for some worrying warnings, but I thought that it's normal. I have a customized kernel, build through ABS... So, when I've tried to load the fglrx module it says:
# modprobe fglrx
FATAL: Error inserting fglrx (/lib/modules/2.6.27-ARCH/video/fglrx.ko): Cannot allocate memory
Please, help me! My machine is slow, I can't run any OpenGL-accelerated application, even Quake III!!! If you can suggest me how to improve the performance and how to resolve problems with open-source drivers, it also would be very good... Thank you and sorry for my poor English please.

I had some problems with installing ATI drivers recently (could not build fglrx module, not even manually, I had to change some installation script), but with latest driver version (8.11 I think) from ati.amd.com was everything fine (I have Radeon 9600 Pro)
Try to do this (and write here the output)
glxinfo | grep vendor
fglrxinfo
In both cases, it should write something like OpenGL...: ATI... if there will be MESA or DRI, that means that you don't have loaded your fglrx module.
If fglrxinfo output will be something like: no permission for...(should be first or second line of the output), then write this somewhere in your xorg.conf:
Section "DRI"
Mode 0666
EndSection
run:
modprobe -a fglrx - and give here the output. If there will be none, run:
lsmod | grep fglrx - to see wheter fglrx module is really loaded in kernel
if you will have no module, you can install one, type:
cd /lib/modules/fglrx/build_mod
sh make.sh
cd ../
sh make_install.sh (as root)
and post any warning or error here at forum, drivers (but not fglrx module) are installed at /usr/share/ati
After installing drivers, you also need to configure your system (notice your system that it's there), commands:
aticonfig --initial (for editing your xorg.conf)
aticonfig --overlay-type=Xv (acceleration support in xorg.conf)
Showing your xorg.conf file here is also good idea, here is mine (sections Device and Screen):
Section "Device"
#VideoRam 262144
# Insert Clocks lines here if appropriate
Identifier "** ATI Radeon (generic) [radeon]"
Driver "radeon"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

How to get both, the ResultSet and Output (return value) from Oracle Stored Procedure

Hi! I am doing a conversion from MSSQL to Oracle with C++ and MFC ODBC. Any comment is appreciated!! I have Oracle 8i and Oracle ODBC 8.1.6 installed.
My question is how to retrieve the return value AND ALSO the resultSet at the same time by using Oracle function without modifying my souce codes (except puttting mypackage. string infron of my procedure name, see below).
-- My source code in C++ with MSSQL ....
sqlStr.Format("{? = call ListOfCustomers(%i)}", nNameID);
RcOpen = CustomerList.Open(CRecordset::forwardOnly, sqlStr, CRecordset::readOnly );
Where CustoemrList is a Crecordset object...
IN DoFieldExchange(CFieldExchange* pFX) I have ...
//{{AFX_FIELD_MAP(CQOSDB_Group)
pFX->SetFieldType(CFieldExchange::outputColumn);
RFX_Long(pFX, T("Name"), mCustoemrName);
//}}AFX_FIELD_MAP
// output parameter
pFX->SetFieldType( CFieldExchange::outputParam );
RFX_Int( pFX, T("IndexCount"), mCustomerNumber);
-- m_CustomerNumber is where i store the return value!!!
-- In Oracle Version, i have similar codes with ...
sqlStr.Format("{? = call mypackage.ListOfCustomers(%i)}", nNameID);
RcOpen = CustomerList.Open(CRecordset::forwardOnly, sqlStr, CRecordset::readOnly );
-- I have oracle package/Body codes as following...
create or replace package mypackage
as
type group_rct is ref cursor;
Function listgroups(
nameID NUMBER ,
RC1 IN OUT Mypackage.group_rct ) return int;
end;
Create or replace package body mypackage
as
Function listgroups(
NameID NUMBER ,
RC1 IN OUT Mypackage.group_rct )return int
IS
BEGIN
OPEN RC1 FOR SELECT Name
from Customer
WHERE ID = NameIDEND ListGroups;
END
return 7;
END listgroups;
END MyPackage;
Ive simplified my codes a bit....
null

yes, it is exactly what i want to do and I am using Oracle ODBC driver.
I tried using procedure with 1 OUT var fo numeric value and the other IN OUT ref cursor var instead of function, but error occurs when I called it from the application. It give me a memory ecxception error!!
sqlStr.Format("{? = call ListOfCustomers(%i)}", nNameID);
RcOpen = CustomerList.Open(CRecordset::forwardOnly, sqlStr, CRecordset::readOnly );
it seems to me that the ? marker var is making all the trouble... can you please give me any more comment on this?? thanks!
null

Adobe Media Encoder The source and output audio channels are not compatible or a conversion does not exist. Export Error

I'm trying to make a dvd, can anyone tell me why this is happening??

Sounds like you unsuccessfully trying to output a 5.1 Master to a stereo or mono file. Or something along those lines.

EJB client needs both source and generated jars?

From within JDeveloper, I created a basic EJB with a default package called EJBHello. Here is my directory structure after building and deploying this EJB:
h:\EJBHello\EJBHello\EJBHome.java, etc.
h:\EJBHello\EJBsource.jar
h:\EJBHello\EJBgenerated.jar
h:\EJBHello\EJBClient.java
With only EJBgenerated.jar in the classpath, the client ran fine in this environment. However, when I renamed h:\EJBHome\EJBHome to h:\EJBHome\temp, the client would no longer run - java said it could not find EJBHello\EJBHome.class. I then added EJBsource.jar to the classpath, and the client would once again run. Does this mean that, in general, I must ship both the source and generated jars with the client classes?

You need to deploy the class files specific to your client as well as the generated stubs for the EJB.

Image Doubling in both Canvas and Viewer

Hey Guys, don't know why this is happening as I didn't change any settings, but when I reopened my edit I'm getting this weird Doubling of the image effect in both the canvas and viewer... Need to finish this and this doubling is killing me, already tried trashing prefs, no mirror filters on the clips, happens for entire sequence....Happening in multiple projects. Any ideas?

Okay so I figured it out, but I'm not sure what it is... if you look in the top right hand corner of my screen, where the volume bar (not in the screen grab cause I had quit the app) there is a rounded corner blue box. When I clicked it a drop down menu shows and it was on Free View, I switched it to 2D and problem solved. Now, new problem, I have no idea what this is or why its on my menu bar. Any one know? Something to do with my Dual Displays?

Dbms_lob.getlength() returns different source and destination lengths

I am fairly new to PL/SQL so maybe this is an obvious problem but here goes. I am updating a clob field with a text file ~5KB in size. The field updates fine (as far as I can tell). Before I update the field, I open the source file as a bfile and then inquire the length using dbms_lob.getlength(). I then update the clob field using dbms_lob.loadclobfromfile(). This seems to work fine. However, when I use dbms_lob.getlength() on the destination object returned by dbms_lob.loadclobfromfile(), I get a length 3 characters less than then the source object (5072 vs 5075). Both the source and destination offsets are set to 1.
Probing on what documentation I could find, I found this at http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28419/d_lob.htm#i998484:
"The length returned for a BFILE includes the EOF, if it exists. Any 0-byte or space filler in the LOB caused by previous ERASE or WRITE operations is also included in the length count. The length of an empty internal LOB is 0."
I did not create the source file and I believe it is a Unix type file (because of the lack of CRs) and I am running on Windows 7. I am also using 11g Express. Could the use of a Unix-type file for a CLOB on a Windows system be causing this character count difference?
Once I found this issue I can work around it. I just want to understand what is going on.
Thanks to all who look at this.

The EOF and the LF versus CR/LF could influence the count difference, yes.
Another explain could possibly be character set conversions. The BFILE I believe counts bytes, a CLOB would count "characters" - so if the source happens to contain a few multibyte characters (UTF), then the byte count would be larger than the character count.
To help you find the cause for your exact file, then I can suggest a couple of things you might do to explore the issue:
<li>Load the file into a BLOB instead of a CLOB and see what getlength() returns for the BLOB. BLOBs would also do byte counts and not try to treat the source as text.
<li>Save the CLOB back into the filesystem and compare the original file with the exported CLOB and check the differences with some filecompare tool.

Input and output on same device, producer/consumer structure

Hello interested people,
I have a question about using the same device for both digital inputs
and outputs. I have written a simple program of one while loop
that continuously polls the device, processes, and requests. I
have addressed the device using two DAQmx Asst. and I have attached
them with their error in/out cluster terminals to provide data flow and
eliminate the chance of addressing the devices at the same time (which
produces an error). Now I want to change this program structure
to a producer/consumer loop foundation with state machine.
In this design, I will have the DI in the producer loop and the DO in
the consumer loop, under one of the states. I can't simply
connect the error in/out ports in this configuration, so my question is
how to avoid the error caused by addressing the same device
simultaneously with two different tasks (input and output)? I
have attached two VI's, the "One Loop" vi is the original configuration
(simplified), and the Producer-Consumer vi is a NONSENSICAL program
that simply represents the desired configuration. (I don't need
any comments on the programming of this vi, it is only an example for
illustration of the problem).
I am thinking about bundling the input data and the error cluster, both
from the PXI 6528 DI, into one cluster, queueing that up, and
unbundling the de-queued elements for some kind of data flow between
the producer loop and the "Request" state of the consumer loop.
Is this the right approach, or am I barking up the wrong tree?
Thanks
Attachments:
One Loop DO DI.vi ‏102 KB
Producer-Consumer DI-DO.vi ‏106 KB

Hello,
It sounds to me like you really have two modes:
1. user interface actions determine execution
2. user interface is locked, and execution is automated.
I think it would make sense to use the producer consumer for an architecture. Basically you would do the following:
1. program the producer to handle the user interface as you normally would.
2. provide one additional event case in the producer which would be your "automated handling" case. In that case, you could put a state machine which could run until whatever conditions were met to put your program back in "user interface mode".
Keep in mind that you can use custom USER EVENTS to programmatically generate events ie. you can trigger the start of your "automated handling" form anywhere in your code at virtually any time.
I think this would allow you to take advantage of the producer consumer architecture in its intended spirit, while integrating an automated routine.
I hope this helps!
Best Regards,
JLS
Best,
JLS
Sixclear

Analog Input and Output in One Single VI

I need help in setting both analog input and output in one single VI. How do I assign channels to be either input or output? How do I simultaneously uses both in one single VI with a while loop structure?? Which AO am I suppose to use to obtain signal from the function generator I have built to feed into the DAQCard-1200?? Help!!
Attachments:
Test1.vi ‏48 KB

One thing you'll need to be aware of is that you will need to DMA lines: one for AI and one for AO. If you don't, then you can configure the DAQCard to do without DMA using the Config VI. But you certainly can do this.
As far as your function generator, you will want to do a buffered analog output. You will write your buffer of points to the buffer, and then tell NI-DAQ how fast to update your analog output channel with these values.
So, you can be reading from AI and checking the AO process in the same while loop. Just make sure you handle the while loop execution (the wait it exits) correctly. This can get tricky when you're doing two types of measurements.
J.R. Allen

Standby Database on a Source and target of different endian formats

Hi
I have a this well know case where the source server and target server are with different endian formats. I want to implement a Data guard 11g in this enviroment. How can I do to implementing having the issue of the different endian formats.
Thanks

Here is the answer.... for your learning....
Checking the Database Before Cross-Platform Database Conversion
As explained in "Basic Concepts of Cross-Platform Data Transportation", you can use the RMAN CONVERT DATABASE command to automate the copying of an entire database from one platform to another.
Before converting the database, see the list of CONVERT DATABASE command prerequisites described in Oracle Database Backup and Recovery Reference. Confirm that you meet all these prerequisites before attempting the procedure in this section.
One prerequisite is that both the source and destination platform must share the same endian format. For example, you can transport a database from Microsoft Windows to Linux for x86 (both little-endian), or from HP-UX to AIX (both big-endian), but not from HP-UX to Linux for x86 (big-endian to little-endian).
Note:
If you cannot use the CONVERT DATABASE command because the platforms do not share endian formats, then you can create a new database on a destination platform manually and transport needed tablespaces from the source database with cross-platform transportable tablespaces.

Data Source and Data Store

Are both Data Source and Data Store the same in BI? If not can someone explain what each one of these terms mean.
Thanks for the help

Data Source or Persistent Staging Area is a transparent database table or initial store in BI. In this table the requested data is saved unchanged from the Source System.
DataStore Objects are primary physical database storage objects used in BI. They are designed to store very detailed transactional level records.
Thanks

Capturing the DML changes on the source and writing to a temporary table

Am trying to set up a change data capture where both the source and target would be the same database.
like in my case i would like to capture changes from a table schema.xyz in a orcl database and write it to a temp table within the same database. My concern here is , the table schema.xyz is already replicating to a different database on a different server.
Any ideas on how this can be achieved?
I thought of setting up a different extract process and capture the changes and write to the temp table , but not sure if this is manageable.
Thanks,
Venky.

Just tap into the existing trail if the change data is already there. There's no need to have a second extract in that case. So ADD REPLICAT and specify the EXTTRAIL the same as the EXTTRAIL for the redo log extract.
OGG won't pick up truncates by default. If the row is gone before the update arrives at the target table then you can use INSERTMISSINGUPDATES. When using this parameter make sure that you add supplemental logging (ADD TRANDATA) for columns that you need but that may not be updated (e.g. target columns with NOT NULL or FK constraints).
Good luck,
-joe

Image Tooltips Present both in Source and Output

Similar Messages

Maybe you are looking for