Images not displaying on the web

I've written an applet that displays jpg and gif images.
It works fine in Kawa, but when I run the applet on the web, I run into the following problem:
The applet runs fine, with full functionality, except that the images are not displayed. I know that they are there, since I am able to use them in the program (part of the functionality relies on comparing two images).
Any idea where the problem might lie? The code, the images, or the browser?
I've tested the applet with IE 5.50.
Thanks for your help.

It could be that you are asking the Applet to display the images before it has had a chance to load them. Running locally, this wouldn't be a problem because they would load so quickly, but running remotely, the images may take longer to load.
Try using java.awt.MediaTracker:
MediaTracker m = new MediaTracker();
m.addimage(myImage, myImageID);
m.waitForAll();
This will block your Applet until all your images have been loaded and are ready to be displayed.
Hope that helps

Similar Messages

  • Image not displaying in the Task Sequence Wizard. SCCM2012

    This is my question, so I will post the link here.
    http://community.spiceworks.com/topic/925727-image-not-displaying-in-the-task-sequence-wizard-sccm2012
    Bryan
    I captured an image from a PC that I am preparing to be deployed with Office 365. Once I captured
    the image, I went to the software library to add the operating system image. That seemed to go on without any issue, but when I look at the summary, I see the big yellow globe saying "in progress" it has not changed since yesterday afternoon.
    I then created the task sequence for this image
    to be deployed under Software Library, Task Sequences. When I selected the references tab, everything seemed to be in order with the exception of the "operating system image" under type. It was/is showing 0.0% Compliance.

    So, the problem described in the other forum post does not match the title of this thread. Are you trying to address two different things? These are unrelated btw.
    For the issue in the other thread, you'll have to troubleshoot your content distribution to the selected DP. The distmgr.log and pkgxfermgr.log (assuming you chose to distribute the image to a DP directly attached to your primary site) are the places to
    start and will show you exactly what's going on.
    As for the title of this thread, we'll need a lot more info to help you there.
    Finally, I would suggest you copy your questions from other sources into the thread -- this will help other folks in the future that may stumble upon this thread and will prevent any confusion.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Siebel Charts gets generated but does not display in the Web client

    Siebel Chart is getting generated in NetChart4.6\Server\root\projects\Siebel.chart folder. However does not display on the Web client
    There is either no error displayed on the front end...
    Also note that Charts is installed on Windows environment and Siebel Server is installed on Linux Server

    Dear User,
    Thanks for using Oracle communities.
    Does this happens in dedicated client as well?
    We would need to have traffic captured when you are actually executing actions. The tools like fiddler etc will help here to track the traffic.
    I would suggest you open SR with MOS since it will need some analysis on network trace like fiddler. You can refer this thread in SR as well, so that once issue gets resolved thread will get updated with solution which will benefit others.
    Best Regards,
    Chetan

  • Spry not displaying on the Web

    I
    have built a webpage conatining a spry widget with flyouts , I have uploaded my files to my host server To display the widgets properly
    I save each page as a html page which i built from a Dreamwever template. Now when the page displays on the web it just has text where the spry should be
    The txt is in Hyperling form but the links dont work eaither. Waht am I doing wrong ?

    Waht am I doing wrong ?
    No idea.
    Please post a link to your problem page so we can take a look.

  • Image not appearing in the Web Parameter Form

    Hello Folks,
    I have image in the Parameter form, which is not showing up in the Web Parameter Form. I had set up the "REPORTS_PATH" also and still not appearing.
    Any clue greatly appreciated..
    Thanks,
    Senthil

    I ran into this problem as well, and there is a work around if you do not want to apply the patch. Put the image in your <oracle_home>/apache/apache/htdocs directory. Then in your report in the parameter section, create a text box. Put this in the text box:
    <img src="http://<your_servername>.<your_domain>:<your_port>/<your_gif>">
    Go into the parameters of the text box you just created(hit F4) and choose YES for Contains HTML. Then when you run the paramter form on your web server the image will be displayed.
    Martin

  • Slideshow-Images not displaying in the right place on the screen

    I am trying to use the SlideShow widget for the first time. I have a pretty basic slideshow with six images that I want to display. When I preview it in IE or Firefox,what I get is really weird. The first image displays in the right place.  The second displays in the right place, but with a black box underneath it. The third displays under where it's supposed to go, with a black box above it. After this, the images alternate between where they're supposed to be and just below that, with a black box of the same size in the second location. I've looked at the source of other webpages that have working slide shows, and I don't see a difference between what I'm doing and what they're doing. Here is what I think is the relevant code. Can anyone suggest a way to fix this?
    <script src="Spry-UI-1.7/includes/SpryDOMUtils.js" type="text/javascript"></script>
    <script src="Spry-UI-1.7/includes/SpryDOMEffects.js" type="text/javascript"></script>
    <script src="Spry-UI-1.7/includes/SpryWidget.js" type="text/javascript"></script>
    <script src="Spry-UI-1.7/includes/SpryPanelSelector.js" type="text/javascript"></script>
    <script src="Spry-UI-1.7/includes/SpryPanelSet.js" type="text/javascript"></script>
    <script src="Spry-UI-1.7/includes/SpryFadingPanels.js" type="text/javascript"></script>
    <script src="Spry-UI-1.7/includes/SprySliderPanels.js" type="text/javascript"></script>
    <script src="Spry-UI-1.7/includes/SpryFilmStrip.js" type="text/javascript"></script>
    <script src="Spry-UI-1.7/includes/SpryImageLoader.js" type="text/javascript"></script>
    <script src="Spry-UI-1.7/includes/SpryImageSlideShow.js" type="text/javascript"></script>
    <script src="Spry-UI-1.7/includes/plugins/ImageSlideShow/SpryThumbnailFilmStripPlugin.js" type="text/javascript"></script>
    <script src="Spry-UI-1.7/includes/plugins/ImageSlideShow/SpryTitleSliderPlugin.js" type="text/javascript"></script>
    <script src="Spry-UI-1.7/includes/plugins/ImageSlideShow/SpryPanAndZoomPlugin.js" type="text/javascript"></script>
    <script type="text/javascript">
      var _gaq = _gaq || [];
      _gaq.push(['_setAccount', 'UA-81003-5']);
      _gaq.push(['_trackPageview']);
      (function() {
        var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true;
        ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js';
        var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s);
    </script>
    </style>
    <link href="Spry-UI-1.7/css/ImageSlideShow/basicFS/basic_fs.css" rel="stylesheet" type="text/css" />
    <style type="text/css">
    /* BeginOAWidget_Instance_2141543: #ImageSlideShow */
    #ImageSlideShow {
    width: 426px;
    height: 303px;
    border: solid 1px #000000;
    background-color: #717c96;
    #ImageSlideShow .ISSClip {
    background-color: #000000;
    /* EndOAWidget_Instance_2141543 */
    </style>
    <script type="text/xml">
    <!--
    <oa:widgets>
      <oa:widget wid="2141543" binding="#ImageSlideShow" />
    </oa:widgets>
    -->
    <div class="column2">
    <div id="thumb">
    <div>
    <ul id="ImageSlideShow" title="">
        <li><a href="images/balloon1a.jpg"><img src="images/baloon1a.jpg" alt="" /></a></li>
        <li><a href="images/balloon2a.jpg"><img src="images/baloon2a.jpg" alt="" /></a></li>
        <li><a href="images/balloon3a.jpg"><img src="images/baloon3a.jpg" alt="" /></a></li>
        <li><a href="images/balloon4a.jpg"><img src="images/baloon4a.jpg" alt="" /></a></li>
        <li><a href="images/balloon5a.jpg"><img src="images/baloon5a.jpg" alt="" /></a></li>
        <li><a href="images/balloon6a.jpg"><img src="images/baloon6a.jpg" alt="" /></a></li>
    </ul>
                                                          <script type="text/javascript">
    // BeginOAWidget_Instance_2141543: #ImageSlideShow
    var ImageSlideShow = new Spry.Widget.ImageSlideShow("#ImageSlideShow", {
    widgetID: "ImageSlideShow",
    injectionType: "replace",
    autoPlay: true,
    displayInterval: 8000,
    transitionDuration: 2000,
    componentOrder: ["view"]
    // EndOAWidget_Instance_2141543
                                                          </script>
    <h3 align="center"><br />A Different Way of Thinking</h3></div>
    </div>
    </div>

    If you have a look at basic_fs.css, you will notice that the styles taget a class called BasicSlideShowFS.
    Yet when I look at the constructor, the class is missing as in
    var ImageSlideShow = new Spry.Widget.ImageSlideShow("#ImageSlideShow", {
        widgetID: "ImageSlideShow",
        widgetClass: "BasicSlideShowFS",
        injectionType: "replace",
        autoPlay: true,
    Because you are not using the thumbnails (filmstrip), I am wondering why you did not implement the basic slideshow, which will make it a lot easier for you.
    Gramps

  • Text not displayed in the Web Report

    Hi All,
    I have a query where user is expecting both Key and Text to displayed in the report for the Info object "Local Product High". This infoobject has text data available. But Iam not sure why this is not getting displayed even when I select both Key and Text in the properties screen.Only Key is getting displayed.
    Can some one throw some light on this.
    Regards,
    Srinivas

    I juct checked the Text table and I see the texts for the infoobject exists. I do not think CHange run will resolve this issue. but yes the master data is active .
    I will now try to run the report through Bex and come back.
    Thanks for the input..
    regards,
    Srinivas

  • .mov file does not display on the web-site

    iWeb is easy to use but my simply link to a .mov file does not work. I am working on the Domain file on my Desktop so I can move it between computers, and it renames the media file in the inspector from name.mov to name-1.mov. In the end the site does not display the animation.

    Are you linking to this file so that it can be downloaded from your website?

  • Bar chart is not displaying on the web page

    In the view.js file it showing the warning in the following line..
    data = [{ label : oBundle.getText("empty") ,data: 1} , ]     -----------------warning : semicolon is required
    oChartModel.setData({modelData: data});
    i think the problem is in above line..
    bcoz of this i am unable to display the bar graph ..
    plz help me...
    Message was edited by: Michael Appleby

    Hi, pbarut I modified the settings of browsers and added the html code below:
    <?php
    header("Expires: Thu, 17 May 2001 10:17:17 GMT");
    header ("Last-Modified: Thu, 17 May 2001 10:17:18 GMT");
    header ("Cache-Control: no-cache, must-revalidate");
    header ("Pragma: no-cache");
    ?>
    But the problem continues.
    When I update the site (CTRL + F5) results viewing, but do not appear when the redirect or click any link.
    Tanks

  • Image not displayed on the button

    I don't know why, but I can't seem to view any image set on a button.
      Image minimize = new Image(getClass().getResourceAsStream("images/min.png"));
          Button button1 = new Button();
          button1.setGraphic(new ImageView(minimize));Even the ButtonSample.java sample program from http://docs.oracle.com/javafx/2/ui_controls/button.htm# does not seem to show the image on the button. (It displays the button without the image)
    Could anyone please tell me what I'm missing here.

    Could anyone please tell me what I'm missing here.You are probably missing the image.
    Is the image in the place you are looking for it under the classpath?
    System.out.println(getClass().getResource("images/min.png").toExternalForm());Then go and check if the image is at the printed location.
    You can also add a listener to the image's error property to see if there was some error loading it.
    You can find some sample code for buttons with images here (http://stackoverflow.com/questions/10518458/javafx-create-custom-button-with-image) and try them out to see if they render correctly for you.

  • Report Not working in the Web Browser

    Hi ALL ,
    Am working on a item SKU report . The report is running fine in the BIDS but once i try to view the report in the WEB Browser
    tried both Mozilla and Internet Explorer no data is shows up .
    The report has 2 report filter one is on the service and the other one is the item sku its a multi - parameter  that contains
    a list of more than 6000 different SKU . Can the filter be the reason for the report not displaying in the web browser.
    If yes kindly advice me what the workaround for it .
    I tried having the filter in the  SQL main query but it was of no use no data it was showing after having the ssrs report filter
    at least right information its showing but in the BIDS not in the main web browser.
    Kindly Help
    Priya

    Hi Priya,
    According to the description, I understand that there are parameters (@SKU and @SKUlist) in the report, and SKUlist parameter is multi-value parameter. When selecting values of the SKU parameter, the parameter SKUlist will display corresponding values. In this
    case, you should create cascading parameters, right? And you use parameters to filter the report.
    Because the data of the report can be shown in the Business Intelligence Development Studio (BIDS) environment, the issue only occurs after deploying the report to report server. Based on my research, I think it may occur because of web browser issue. I have
    known you use Mozilla and Internet Explorer to view the report but there is still no data.
    In Reporting Services, not all report functionality is supported by all browsers. In this scenario, I suggest you considering the aspects of the setting or third party add-ons of Internet Explorer (IE). You can refer to the steps below:
    1. Click Tools -> Internet options.
    2. Switch to the Security tab, click Local intranet, and then select Default level.
    3. Switch to the Advanced tab, and click Restore advanced settings.
    4. Temporarily disable third party add-ons. For detailed steps, please see the link:
    http://windows.microsoft.com/en-IN/internet-explorer/manage-add-ons#ie=ie-10
    Reference:http://technet.microsoft.com/en-us/library/ms156511(v=sql.105).aspx
    Regards,
    Heidi Duan
    Heidi Duan
    TechNet Community Support

  • Images were not displaying in the B2B web shop for the products

    Hi,
    We have an issue with Product catalog images.we maintained images for the products and replicated(Initial) to TREX server,replication was successfull,but the images were not displaying in the b2b webshop for the products.
    Anyone suggest what could be the problem?
    Regards,
    PV.

    Hi,
    The problem could because of following issues.
    1) The replication is not done properly
    2) The XCM doesn't have Image server's settings(URL)
    3) The Image server is not reachable from ISA application.
    4) The image server is not connected through HTTP.
    Please check.
    Regards,
    Sateesh Chandra

  • Why is the logo image not displaying in Firefox?

    The logo image for one of my sites is not displaying. The alt info for the image is being displayed. This is a relatively new problem. In older versions of Firefox the image displayed fine. The image also displays fine in Webkit browsers and IE10. This is a Firefox specific problem. The main URL for the site is: http://sabaki.aisites.com/dbs323/project/masterAi.php
    If you go to that URL in Firefox you'll see "logo gif" split onto two lines and before the "COTin" text. If you view the same URL in Chrome or IE10, you'll see the image. I have screenshots of the problem, but there is no way to include them here.

    Works fine here.
    Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Press and hold Shift and left-click the Reload button.
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (MAC)
    If you use extensions (Tools > Add-ons > Extensions) like <i>Adblock Plus</i> or <i>NoScript</i> or <i>Flash Block</i> that can block content then make sure that such extensions aren't blocking content.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Images in wwv_flow_file_objects$  do not display in the shared components

    Recently I needed to re-create an APEX workspace. The schema was intact, so I just created a new APEX workspace mapped to that schema and re-imported my apps.
    All was well EXCEPT that the images and files (e.g. style sheets) previously uploaded to the database under the original workspace were missing. Looking at the wwv_flow_file_objects$ table I saw the images and files were present but their security ID did not match that of the new APEX workspace.
    I updated the security ID and the files and images now work BUT THEY DO NOT DISPLAY IN THE SHARED COMPONENT LISTINGS. My fear is that I'll try to upload an image or file by the same name and they'll stop working because there will then be two rows in wwv_flow_file_objects$ with the same file name and security ID.
    Does anyone know how to get these items to display properly in the shared component reports?

    If they were application-specific, you would need to ensure that the new flow_id value in the table matched that of the application to which the file should be associated. If not, that value should be zero.
    Scott

  • Background-image of a Design Studio 1.3 extension is not displayed when the control is  dragged on the canvas

    Hello,
    I have a Design Studio Extension with a background image which behave well in Design Studio 1.2.
    In Design Studio 1.3 when I drag the control into the canvas the image does not show-up. If I execute the application the image appear in the browser even is not in the canvas.Once I save and reopen the application the image is displayed on the canvas as expected.
    I built an extension based on  the 'Timer' sample which comes with the DS_13_SDK_Samples ( it has a background image) and it behaves the same way - when you drag the control on the canvas, the image is not displayed.
    Any help to solve this issue is much appreciated.
    Thank you.

    It does start to work once I save and reopen or even when I run.
    I tried the inline style but the behavior is much stranger. It does work if I have a full address url to an image, but if my image is part of the control's folder structure it fails completely - it cannot map the right address to the image. The only configuration that appears to work better is the one with the original problem.
    Thank you.

Maybe you are looking for