Images open in RAW no matter what.

When I open an image it opens in raw first. why? when I need to open an image template say from WHCC it won't show the lines (I'm guessing because of the RAW thing). Please help.

angelina,
Look in PHOTOSHOP PREFERENCES>FILE HANDLING. In the lower half of this panel there are several choices you can make about whether your jpg, tif, or whatever , will open in camera raw automatically, or directly into Photoshop. RAW file will always open ACR, but you can click at bottom of the ACR panel "open" and it will be opened in photoshop .
It is not perfectly clear in the panel, but you can figure it out. Don't forget to save your choices (R upper corner of the panel). These can be changed repeatedly until it works your way.
vince
Message was edited by: vinsolo

Similar Messages

  • When I start ffox I want the same 2 tabs to open EVERY time no matter what sites I have visited in previos session - can I achieve this

    when I start ffox I want the same 2 tabs to open EVERY time no matter what sites I have visited in previos session - can I achieve this

    In the home page setting you need to use a pipe (|) symbol as separator.
    See [[How to set the home page]]
    You can also create or modify a Firefox desktop shortcut and add the two URLs to the target field of that shortcut.
    In that case you need to separate the URLs with a space.
    "C:\Program Files\Mozilla Firefox\firefox.exe" http://site1.com http://site2.com

  • My desktop image will not resize no matter what I do.

    For some reason, I cannot get the images that I use as my desktop wallpaper to do anything but "full screen". I've done restarts and tried every type of image display and nothing works. I have some great wallpaper images, but unless I can do "fit to screen", they're so large you can't see half the image. I don't want to use the ones that come pre-installed. Help!

    Try restoring the phone in Recovery Mode: http://support.apple.com/kb/HT1808.

  • It won't open any website, no matter what i type in, in ff 4 beta 5

    i downloaded ff 4 beta 5 this morning, and at the end of the installation, (where they check compatability of add-ons) a pop-up said
    The operation cannot be completed because of an internal failure. A secure network communication has not been cleaned up correctly.
    and when i opened the ff beta, it won't load any pages...
    its just in the beta... my regular ff (3.6.9) is fine.

    This is a known bug and it is being worked on.
    The relevant bug report is [https://bugzilla.mozilla.org/show_bug.cgi?id=588511 Bug 588511], but please do not comment on the bug report.

  • My Thunderbird opens 2 windows no matter what

    It has just started happening, have years of use. EVEN in safe mode, 2 Thunderbird windows open, and nothing seems to stop it. Need suggestions please

    Are you using the current version 24.6? There were problems with this happening back around ver 16 or 17 but I have not heard of it since then.

  • ITunes won't open...no matter what! Expert advice needed

    Hi,
    I installed iTunes on my computer but I cannot open it.
    Everytime I do I receive the message:
    *'This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator.'*
    The thing with this is, I am an administrator. Now, I've logged into my computer on the built in Administrator account and it loads up and works fine, but as soon as I go back to my personal account I can't open iTunes.
    I've tried all the obvious such as reinstalling the program etc. but nothing works.
    Help, help, help!!

    Most of the users of this forum are American and asleep at the moment.
    I am afraid I don't have a definitive answer, I guess it must be something to do with the way you ahve your account set up.
    However to get running, how about going to your shortcut and selecting poperties, then the shortcut tab>Advanced.
    There is a run with different credential checkbox, it is geyed out on my Home Edition XP, but maybe you can use it to run iTunes as the adminstrator from your account. This wouldn't be a long term solution.

  • I have a browser setting change notice that comes up every time I open Firefox. No matter what I click on it will not go away. How do I get rid of it?

    My choices are: keep my current settings or I am aware of this change and approve it. If I pick either one and say "yes" it will not go away. If I click on the close "x" it will not go away either.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Email Attachment​s No Matter What Size will not download or open up

    My Playbook was originally able to open my email attachments from my BB phone but now I can no longer download or open any attachments - no matter what the size.  Even an attachment that is 1 KB won't open!  It just says 'Attachment too large'.  When I click the ? it says 'The attachment exceeds the download size set by your administrator.'.  The thing is I am a BIS user and not a BES one so there is no administrator.
    Please help cause I've searched all over for a solution and have found nothing.  I've had my playbook for a year now so I can't get direct support.  Also, my phone is a Bold 9900 on OS7.
    Thanks.

    I am a BIS user. I wasn't able to pinpoint the problem but I deleted all the data and settings from my phone and only added the basics (contacts, calendar, emails, etc) and got it to work. It must be a setting or application permission that is causing the problem. If I find out exactly I will let you know.
    I did the same thing - as mentioned above with the latest software and reinstalling the bridge but had no luck.

  • When I click on I Tunes store from my library nothing happens. No matter what I do the I tunes store will not open. What can I do?

    I just downloaded the new version of I tunes and I went to the I tunes store. It opened just fine and I was browsing the store. I saw a song I wanted to purchase but I decided to return to my library to make sure that I didn't already have that song. When I clicked on I tunes store to return to the store nothing happened. The store would not open. Now no matter what I do the I tunes store will not open. I don't know what to do about this problem. Please help. This is very frustrating.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
    /var/log ▹ install.log
    from the hierarchical list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • I have the first iPad, and it keeps crashing no matter what program(safari) app (iTunes) or game I use. I check the updates regularly and I'm up to date. Why does it keep crashing and how can I fix it?

    I have the first iPad (which is considered ancient). I'll open safari and no matter what I'm searching after a few minutes it crashes (it will close safari and bring me back to the main app screen). The last few days I've been searching song on iTunes, and I have the same issue. It closes my iTunes and brings me to the main app screen.
    I have checked my updates and everything is current for this iPad. It's a 64gb iPad with 54gb of available space so I know it's not a storage issue.
    Does anyone have some pointers on how to keep it from crashing all the time?

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • I have downloaded Adobe camera raw 8.4 so that I can open raw files with pictures taken with the Sony a6000 camera.  However it is not opening the images in camera raw.  What can I do?

    I have downloaded Adobe camera raw 8.4 so that I can open raw files with pictures taken with the Sony a6000 camera.  However it is not opening the images in camera raw.  What can I do?

    Close and restart Photoshop if you have not already done so.
    In Photoshop, go to the Help - About Plug-in... menu then choose Camera Raw.  What version does it say there?
    -Noel

  • No matter what i try i cannot get Photoshop or Bridge to open Camera Raw Filters, how do i fix this?

    no matter what i try i cannot get Photoshop or Bridge to open Camera Raw Filters, how do i fix this?
    I have windows 8 and ive tried everything i can to open it but it refuses to let me.

    Let's get some information first.
    What is your version of Adobe Camera Raw, Bridge, and Photoshop?
    What files are you trying to open in ACR? If Raw, for what camera model?

  • I have lightroom 4 and have recently bought a canon rebel t5. it will not let me open up raw files, no matter what i do. please help. thank you.

    I have lightroom 4 and have recently bought a canon rebel t5. I cannot get lightroom top open the cr2 (raw) files no matter what I do. Please help!!!

    You need to upgrade your version of Lightroom to version 5.4 or newer.
    Camera Raw plug-in | Supported cameras
    Or, download and use the free DNG Converter, which will produce files that Lr 4 can convert.

  • I own a Canon 6D and just bought Photoshop CS6 and I am not able to open my raw images into Photoshop CS6. What do I do to fix this?

    I own a Canon 6D and just bought Photoshop CS6 and I am not able to open my raw images into Photoshop CS6. I downloaded the camera raw and dng converter for it, but realized in the process that the one I downloaded does not work with my Mac version, 10.9.5.

    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    Mylenium

  • I'm using the latest photoshop cc 2014 with most updated camera raw... i am having A LOT/REPEATED trouble getting files to "synch" with corrections, no matter what i options i select (i.e. "everything")... WTH is wrong with me/my computer/adobe?! help. fa

    I'm using the latest photoshop cc 2014 with most updated camera raw... i am having A LOT/REPEATED trouble getting files to "synch" with corrections, no matter what i options i select (i.e. "everything")... WTH is wrong with me/my computer/adobe?! help. fast. please

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

Maybe you are looking for