IMAP setup on a Blackberry gets the original email when replied to or forwarded from Outlook.

I configured IMAP on my blackberry, but every time I reply to or forward an email in Outlook, the original email that I am responding to or forwarding gets sent back to my blackberry

The outlook/microsoft exchange does not support the full IMAP standard and changes the UID of the email every time you click on it, reply to it, open it, or forward it. The blackberry server only checks for the UID, and if it's not the same as the one on your phone, it'll download it again.
I really wish either the Blackberry server would check for more than the UID (Gmail does it), but so far it seems neither company will budge. Microsoft wants to do it their way (go figure) and RIM wants to adhere to the standard (makes sense).
Really, I think RIM should just back down from their stronghold and check for more than UID to determine if an email is new or not.

Similar Messages

How to get the Response Code when a URL is launched from Web Dynpro

Hello Experts,
I have a Web Dynpro Application in which in one of its views i have an IFrame UI element in which i will show a resource stored somewhere ..
But before showing it i want to check if the resource actually exists. For this i have to check the HTTP Response code from Web Dynpro Application without setting it in the Iframe..
I am using the following code to get the Response Code:
try{
URL url = new URL("Some Url");
HttpURLConnection.setFollowRedirects(false);
HttpURLConnection connection = (HttpURLConnection) url.openConnection();
connection.connect();
wdComponentAPI.getMessageManager().reportSuccess("Response code ="+connection.getResponseCode());
}catch(Exception e){
wdComponentAPI.getMessageManager().reportSuccess("Exception");
Now the Problem is whatever response Code occurs 403 (for No Proper Authorization), 404 (for Resource not found) etc..
i always get Response Code= 500 (which is for Internal Server Error) shown in the messgae i have printed.
Please let me know the correct way of getting the Response Code from Web Dynpro.
Also my resource is lying on a SAP Portal 6.4
Best Regards
Sundeep
Edited by: Sundeep Sethi on Feb 18, 2008 9:07 AM
Edited by: Sundeep Sethi on Feb 18, 2008 10:23 AM

Hi,
Check this code from /thread/5242768 [original link is broken] if it works.
try{
URL myurl = new URL("http://calendar.google.com");
URLConnection connection = myurl.openConnection();
if(connection instanceof HttpURLConnection) {
HttpURLConnection httpConnection = (HttpURLConnection) connection;
HttpURLConnection.setFollowRedirects(true);
httpConnection.setRequestMethod("HEAD");
httpConnection.connect();
System.out.println("Response = "+httpConnection.getResponseCode());
catch(Exception e) {
// print exception
Regards,
Harini S

I keep getting the same emails twice, after I've deleted from device and read on desktop!

While at work, I usually read my email on my computer, but I still get them on my BB, which I delete right away. However, even after it's already been read on my computer and deleted from my Curve, I end up with another alert for the same email, and the email as unread in my Curve inbox.
How can I make that STOP? I don't need to be told more than once that I have a new email, and even less so if I've already read it!

is the email imap, pop, owa/exchange?
do you have redirector installed (in DTM is there an email settings icon)
who is your carrier?

Text appears in the middle of the original message when replying

Has anyone had this problem? When replying to an email the reply message text appears right in the middle of the detail header of the original message. Here is an example:
Original Message:
From: Jane Doe
"Yes 2PM at Market Place works for me."
To: Tawnbi
Sent on xx/xx/2007, Friday, etc.
Hey! How about 2PM tomorrow at Market Place?
Okay. The text "Yes 2PM at Market Place works for me" was the reply. Why didn't it appear above the detail header to the original message? The rep at Apple Store in Chicago said he's only had one other customer with this problem. The email is being accessed through Outlook Web Access. Has anyone had this problem? If so, found a solution?

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

I get an error message when clicking on a link from Outlook Web App

I get about 10 error message boxes whenever I click on a link that takes me away from Outlook Web App. Here is the error:
Client Information ------------------ User Agent: Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.1.11) Gecko/20100701 Firefox/3.5.11 ( .NET CLR 3.5.30729) CPU Class: undefined Platform: Win32 System Language: undefined User Language: en-US CookieEnabled: true Exception Details ----------------- Date: Thu Jul 29 2010 09:13:01 GMT-0500 (Central Daylight Time) Message: Permission denied for <https://webmail.stjohns-network.org> to call method UnnamedClass.toString on <>. url: Line: 0 Call Stack ---------- undefinedError()@:0 window$onerror("Permission denied for <https://webmail.stjohns-network.org> to call method UnnamedClass.toString on <>.","",0)@https://webmail.stjohns-network.org/owa/14.0.639.21/scripts/premium/uglobal.js:1 function Array$get_Length() { return this.length; } function Array$get_Item(index) { return this[index]; } function Array$get_Enumerator() { return new (Owa.Collections.ListEnumerator)(this); } function Array$remove(oItem) { var index = this.indexOf(oItem); if (index > -1) { this.splice(index, 1); } return index > -1; } function Array$removeAt(iIndex) { if (iIndex < this.length) { this.splice(iIndex, 1); return true; } return false; } function Array$add(oItem) { this.push(oItem); } function Array$clone() { return this.slice(); }
== URL of affected sites ==
https://webmail.stjohns-network.org/owa/

Hi Everyone,
I figured out the error. The error is caused by the "Fasterfox extension". Disable or uninstall the extension and then try to open the outlook after restarting the firefox.

I cannot sign in and do not get the password email when I request it.

I try to sign in with the stored username and password, but they don't work. I've tried getting new password sent via email 5 or 6 times in the past 24 hours, but I never received an email.

Sign in to what?
As far as not receiving the email, did you look in the Spam folder?

Firefox doesn't show original text when replying an e-mail in Hotmail

Firefox doesn't show the original text when replying an e-mail message in Hotmail. It's not an account issue since I've tried the same with Explorer and the original text DOES show...
== URL of affected sites ==
http://www.hotmail.com

anyone fix the problem yet?I cleared my cookies and that didnt work.

TS1843 i am using iphone 4 ios 6.1.3, after hotmail imap setup, error showing "CANNOT GET MAIL" tHE CONNECTION TO THE SERVER FAILED. its happening since 14 aug. plz help !

i am using iphone 4 ios 6.1.3, after hotmail imap setup, error showing "CANNOT GET MAIL" tHE CONNECTION TO THE SERVER FAILED. its happening since 14 aug. plz help !

I have trouble with sending e-mail and syncing e-mail. Try changing to 1 day sync under settings. It's sluggish but it works for me until they resolve the issue. MS claims all is normal. If you still have a problem you should report it here: https://status.live.com/report/hotmail

How do I get the original software for my HP Pavilion g7-1329wm Notebook PC

I recently had a vicious virus that encrypted my pictures and files in my computer; had it removed from the computer and now internet explorer does not operate correctly and I have to use Chrome for browsing. I was told that I need to get the original software to fix this problem, how do I get this and is there anything else I can do?

Backup your data.
To perform a factory restore, repeatedly tap the F11 Key at boot to enter the recovery manager. Follow the screen prompts.
If no go, use the recovery disks hopefully you created when you got the computer. If not and if you live in the USA/Canada, call HP at this number 1-800-334-5144, and see if you can still get a set of recovery disks. If not via the WorldWide site: http://welcome.hp.com/country/w1/en/support.html
If HP does not have them, they do at Computer Surgeons:
http://www.computersurgeons.com/p-20692-recovery-kit-679965-001-for-hp-pavilion-notebook-pc-model-nu...
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone. The missing movies are shown as generic movie icons in the iTunes panel. How do I get the original movies to show up again and transfer to the iPhone?

I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone 5. The missing movies are shown as generic movie icons in the iTunes panel and are checked to select them. But they do not show up in iPhone Videos. How do I get the original movies to show up again and transfer to the iPhone? I recently upgraded Mac OS to 10.6.8

1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
tt2

How to get the original query string in an event receiver when dialogs are enabled

I have scenario where I am adding a document to a document library which has an external data column on it. My goal for this column is to have it automatically populated with an appropriate value based on original query string to the page. The general
idea is that I am on a custom page that has various webparts on it including a view of my document library that is context sensative based on the query string, and I want to use that context sensitivity not just to filter the list but also when adding documents.
I have been searching around for solutions to this problem all day and have gotten this far:
I have an event receiver attached to my document library that handles the ItemAdded event syncronously (as such I have the new list item available to me). In that event receiver I am able to set the column values as required. Where I am stuck is on getting
the value from the query string that I need to actually set as the column value.
Based on:
http://social.technet.microsoft.com/Forums/en-US/sharepoint2010programming/thread/8cfcb299-9a55-4139-86ec-0b53b2922a54 and several similar articles/posts I have been able to get the original source Url with the query string I want via the following
code in my event receiver:
private HttpContext context;
public EventReceiver1()
context = HttpContext.Current;
public override void ItemAdded(SPItemEventProperties properties)
var originalQueryString = context.Request.QueryString["Source"];
// Parse the query string and use the value ...
The problem is that this solution breaks down if the dialogs are turned on under the advanced settings for the list. The reason the solution fails is because the "Source" query string parameter goes away and is replaced by "IsDlg" set to a value of "1".
Does anyone know how to get past this hurdle? Any help would be greatly appreciated.

Hi Stuart,
The reason I'm looking for "Source" in the query string is because that is something I found to be reliable when the Dialogs are turned off. I've dug around pretty deep in the Request object to see if anything had the data I was looking for and unfortunately
it doesn't appear to be there. The
context.Request.QUeryString.ToString()
returns a rather simple one of:
List=%7b43ECDCB0-8440-4652-B067-AA20481779D7%7d&RootFolder=&IsDlg=1
and the
context.Request.UrlReferrer.Query.ToString()
has the same value.
I suspect this is due to the dual step process that takes place in adding an item to a document library where the first modal popup (which I suspect likely has the information I need) gives you the opportunity to browse to your file and then the second
dialog (maybe this is getting brought up as a result of another request which is now referring back to the original request that brought up the first dialog?) where you edit your properties.
Thanks for the try though, if you've got anything else I'd love to hear it.

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date is created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD

How to get the original version of Web report in BW ?

Hello Friends ,
I have transported one Web report from BW development to BW Production System.
But unfortunately , the desired result not me met .
So I have been asked to keep the original version of the Web report.
As the new version of Web report has replaced the previous one ,
So could anybody tell me how to get the original version of Web report in BW ?
Many thanks in advance !!!!!!!!

Hi,
You can use the Transaction STMS choose the option "Import Overview" . In the GOTO tab select "History" and choose "Import History".
Here you can find the history of requests imported to the prod system.
Regards,
K.Manikandan.

I am trying to reinstall Windows on my macbook pro. I downloaded the support files and Windows 7 iso file to a USB drive. However, when I try to run the setup.exe program I get the message "this program cannot be run in DOS mode."

I am trying to reinstall Windows (would not launch). I removed the partition and started over. I downloaded the support files and Windows 7 iso file to a USB drive. However, when I try to run the setup.exe program I get the message "this program cannot be run in DOS mode." I was successful before, what am I doing wrong this time?

Try a restart.
If that doesn't fix the problem, shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application unistaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac

How do I revert to original footage in Final Cut Pro X version 10.0.9, for some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?

How do I revert to original footage in Final Cut Pro X version 10.0.9?
For some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?
Only the edited version which is no good without the audio?
Please Help

What format is your problem clip? Are there wave forms visible in the section without sound?
Right click on the clip in the event broswer and choose Reveal in Finder; open the clip in Quick Time to confirm that there is sound throughout at that stage of your workflow.
Russ

IMAP setup on a Blackberry gets the original email when replied to or forwarded from Outlook.

Similar Messages

Maybe you are looking for