Impact in QAS BI after updating QAS ECC with data PRD ECC

Hi experts,
Our team want to do update of data in our QAS ECC from PRD ECCthis week end.
Whatu2019s the impact for this operation in my system QAS BI ? itu2019s mondatory the reactive my Business Content after this operation or I dow only a new init load from may QAS ECC to QAS BI ?
Can you please give me a step by step of procedure after upgrading the data in QAS ECC.
Have nice week-end experts
Ilyaebi

Shouldn't the variable you are "varying" be the same length / type as the "from" and "to" i.e. more like (from SAP help):
DATA: BEGIN OF TEXT,
        WORD1(4) VALUE 'This',
        WORD2(4) VALUE 'is',
        WORD3(4) VALUE 'a',
        WORD4(4) VALUE 'loop',
      END OF TEXT.
DATA: STRING1(4), STRING2(4).
DO 4 TIMES VARYING STRING1 FROM TEXT-WORD1 NEXT TEXT-WORD2.
WRITE STRING1.
IF STRING1 = 'is'.
    STRING1 = 'was'.
ENDIF.
ENDDO.

Similar Messages

After updating my Ipod with IOS 5, some of my music no longer plays. Album cover is shown, but the IPod skips to the next song. Any ideas why?

After updating my Ipod with IOS 5, some of my music no longer plays. Album cover is shown, but the IPod skips to the next song. Any ideas why?

A not uncommon problem. See this previous discussion.
Problems with IOS 5 Music App (Updated)

Adobe Standard 9.5.2 after update I get "Insufficient data for an image" error

After updating to Acrobat Standard and Readre 9.5.2, some (but not all) of my pdf files are now opening with the error "Insufficient data for an image." The files open, but they are fuzzy, pixelated and are missing the bates stamp I applied earlier (using a utility from LexisNexis Casemap). I can open the files fine on another computer with Acrobat Standard 9.5.1.
How can I uninstall the 9.5.2, or get it to work again?

Windows 7 64-bit with Samsung SSD on an i5 Lenovo laptop. Yes, I have both Acrobat Standard and Reader 9.5.2 on the machine. Both give the same error when opening the attached file.
-Dan-
[email protected]
Date: Thu, 16 Aug 2012 23:06:52 -0600
From: [email protected]
To: [email protected]
Subject: Adobe Standard 9.5.2 after update I get "Insufficient data for an image" error
    Re: Adobe Standard 9.5.2 after update I get "Insufficient data for an image" error
    created by vamalik in Acrobat Installation & Update Issues - View the full discussion
Hi osieko,Can you share across any such sample pdf file? Also, what OS are you working upon?You have both Acrobat Standard 9.5.2 and Reader 9.5.2 installed on your machine. Right? One option that you can try is to repair your Acrobat/Reader from Programs in Control Panel and see if that resolves the issue.Otherwise kindly attach a screenshot of the error you are receiving along with any sample pdf file.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4627764#4627764
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4627764#4627764. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

After update my iphone4s with ios 7.1 and after that wifi gone off...

after update my iphone4s with IOS 7.1 my wifi went off no network coming.
this problem start after this ios update.

See if this will help. http://support.apple.com/kb/HT5699. Otherwise you will need to contact Apple Care and ask for the Account Security section.

My iphone 3gs is not activating after updating my software with i tunes...what shall i do? cant i go back to my normal version which was ios 4.1

my iphone 3gs which is not associated with this accunt is not activating after updating the sof tware, it connects to i tunes but i tunes says "we arh your unable to continue with your activation at this time, please try again later or contact customer care". my iphone aslo just says it cannot be activated or something like that every time i try. i have been waiting for 4 hours now but it still hasnt worked. how can i uninstal this update and go back to my old version which ws ios 4.1 or or ios 4,3. i dont even know what version it updated to, im assuming it is ios5 but not sure. it says try connecting to i tunes as well but it is connected and i tunes cant activate it either. my phone is connect to a wifi but it stll says no service.
i will really appreciate some help.
thanks.

Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?

After update performance issue with certain PCs

Over the past 2 months there was an update to the Forefront Client that caused a strange issue on some of our machines. Basically when we update device drivers MsMpEng.exe goes nuts and uses at least 50% to 98% of the CPU for the entire duration of
the driver install/update.
The immediate result is that some of the larger device driver installs (like video drivers) actually time out because of this. Using procmon I traced the cause of the delay. It looks like MsMpEng is scanning the setupapi.dev.log file over and over
and over..hundreds..maybe thousands of times. We noticed that if we turned off logging for the device driver udpate/install and app install logging that this issue disappears. We've had this level of logging for years and only in the past 2 months
or so has this issue started to pop up. The setupapi.dev.log file is rather large and so I can see why it's causing a delay if it has to scan the file over and over and over.
We aren't sure what changed. We used an older image that had an older version of the Forefront client installed and we made sure it didn't update to a newer client version. That version of forefront had no issue with device drivers timing out. After
updating the client we now have the issue. A change was made recently and we believe the forefront client is behaving differently.
Any ideas about what could cause this?
Thanks.

Hi,
Thanks for your question.
How did you perform the update of Forefront Client Security, from windows update or manually? In addition, what are the editions of the Forefront Client Security now and before
you updated?
Best regards,
Susie

Regarding after updating my iphone4 with itunes in laptop after completing,when iam trying to use apps on my iphone4 they are not working

Hi everybody,
From last week when iam syncing my iphone with my laptop and updating songs or apps iam facing some problems.
1) While iam trying to update my iphone with itunes for updating songs.First in library in itunes i will remove old songs and will update new songs,then after syncing with itunes my iphone4 it must show in music only new songs not old songs.but for me both mix it showing for me old and new songs.I tried in manual option also then also it showing same mix songs.please tell me how to over come this problem.I tried my removing update backup also then also it is not showing any advantage in it.
2) Another problem is while iam updating my iphone4 with itunes it automatically sync the apps also but after completing the update when iam trying to use apps in my iphone they are not working.
Please help me how to solve from these problems.

No NAS other than an Apple one includes native support for AFP. They all use an open source package called Netatalk that is junk. Many years ago Apple deprecated the old security modules that Netatalk uses.
The easiest solution is to hack up Lion so that it will connect with the old security protocol. Do a search for "lion dhx2" or something like that. Another option is to update your NAS to a version of Netatalk that includes support for DHX2. That is easier said than done. Netatlk isn't as "open" as other open source packages.

Serious Problem after update my 5800 with 40.0.005...

Yesterday,I updated my 5800 with FW 40.0.005. I really impressed with the new easy way of move in touch screen but this version has a big problem that I considered.
First,you have to set as a ring an .mp4 file or any video file and then lock your mobile 5800.
When you have an incomming call the screen isn't working normally and it stops for miliseconds and starts again!
When it happens the power of mobile increasing sharply and I am upset what it could happen if the call continue too much.
Please somebody check it as soon as possible because it may do harm to our mobile by any explosion from this problem!
For temporary solution a suggest not to set video files as a ringtone and if you want to do this don't lock your mobile which helps the video file to work normally.
With regards,
Stelios
Solved!
Go to Solution.

Dear all
kindly visit the below link and read all the actual exp b4 updatig to V40'
NOKIA 5800 V40 BUGS
there are alot of bugs in v40 and its is discover by the ppl like you. I Have MY nokia 5800-d1 with the RM-356 type having SWV:21.0.0.25.
I am happy with it as i dont want to loose my data and time. It cost me alot
THE PRIOR KNOWN BUGS IN V40 UPDATE
NO RDS IN Radio Option (It was there in previous all version till V30&31)
Radio application can't be exited in the end
some application icons are multiplied like in previous firmware version
Thumbs of contacts on HS are loading too long
listing files in Settings/App mgr/Installation files takes way too long too
The screen won't turn off when you plugged the power. Same that it won't turn off after you unplugged from power.
Applications cannot be uninstalled. It says "Unable to start the installer" or something like that the radio application could not be quitted
The new SW update doesn't allow me to install updates. It just says fail...
Most of the time, the music player cant be closed and the song will show right on the home screen. my screen backlight also not go off when plug in or unplug the charger
Normally, when your 5800 full charged, it will beep and turn on the screen for couple of seconds. Now it won't turn off once this was triggered.
In Messaging, message won't open on tapping ! The message seems selected, and doesn't respond to tapping(single or double) ... then options for message also doesn't open, only option is to exit messaging
Frequently it happens I must remove SD before I can install/remove programs
video player bugs (many video played improperly, sound played without images. or freeze at some point, but the sound continues
Unable to install Opera Mini from Ovi Store and from Opera.com website download
Regards
Ahmad Ladhani

After updating my 3GS with ios5, my BMW usb interface no longer works

After updating my iPhone 3gs with ios 5, my BMW usb interface no longer works. I can no longer see my music on the screen and cannot control my music. I tried my old Nano in my car and that works so I'm thinking it must be something with ios 5. Any suggestions?

Update: I was able to resolve the problem by re-syncing the music on my iPhone in iTunes and then shutting down the phone and restarting it. After that, I connected the usb cable from my car to the phone and it worked.

After update cant turn off data or background

i use to turn background& data off to save batttery now since update cant figure out how to turn off

B33 wrote:
Update: To Restrict Background Data Go to settings Tap Data Scroll up a Bit and Tap your Settings Bar And there will be a Black Box With
Restrict Background Data <----this is the one you want to Check
Show Wi-Fi Usage
Show Ethernet Usage
Those instructions are incorrect on a Bionic, B ...
press the menu button > press 'system settings' > press 'data usage' > press the menu button > press 'Restrict background data' and then you should see a checkmark and get a pop-up reminding you that some apps won't work with background data off > press ok

Updating target table with date in owb using mapping

I want to update the effetive begin date (month begin date) when we load the target table. I have field in target table has Eff_updated_dt defined as DATE.
If I use the Data generator operator and then expression operator (trunc (sysdate,'mm' ) it giving error. It says data generator operator should be connected to flat file .
What other operators can I use to update the column with month begin data.
Also which operator I have use to have sequence key in the table.
Thanks

you can always use a constant for the date field.
just create a constant of type date and give it the value you want, trunc (sysdate,'mm' ) and connect it to your target column, Eff_updated_dt defined.
you have a sequence operator that you can use to link to your "sequence key" as well.
Borkur

TS3274 after updating my ipad with ios7, the keyboard is really slow. Any suggestions how to fix it?

after I updated my iPad mini to ios7, the keyboard has been slow. Any ideas how to fix it? I tried restarting it already. Also, how do you clear apps now? I pushed the home button twice to bring up the apps, but I don't know how to delete them. I tried holding the app down to make it shake but that doesn't work anymore.

To clear apps swipe up on the app. You might want to try resetting all setting it has helped some. Also try setting>general>accessibility>increase contrast turning this on reduces a couple animations which some say shows an increase in speed.

Sad smiley after update. Need my data!!!

Now when its turned on its showing a smiley on a blue screen and then it turns off. My understanding from reading online is that the update did not install correctly. I NEED A FIX AND I NEED MY DATA!!!
Soft reset makes no difference.
Details:
So, suddenly my phone shows there's an update. I am ecstatic coz I have *always* has issues getting updates and here this time it was showing up on my phone as its supposed to.... I should have known better...
I am beyond sick and tried of windows now. I am 10 year Nokia user and I am pretty sure this is my last Nokia and first and last windows phone. I was one of the earliest Lumia 920 users... And have had a horrible experience. For the first 6 months, it couldn't be unlocked to be used outside the US. And I was moving out.... So I carried a brick with me that whole time. Ever since then one or another thing had not been working... and every time I would look up for a fix, it turned out there was an update but some how my phone not only misses it but couldn't get it no matter what I do. Finally I was able to go to one of the rare Nokia centers in Brazil. The guys were nice enough to get the US version of the much delayed Lumia update for my phone. After that I was sure my problems were over and it worked pretty good.... And now this.... I am sick of not being able to rely on a device that is supposed to work pretty good. I am lost confidence now for good. I would appreciate if some how I can find a way to recover my data so I can leave this **bleep** phone behind. If not... then this is the last time windows phone is hurting me... I am determined not to give it another chance... I have had to wait, loose my data or work with a degraded device for far too long now.

Provided you followed best practice and keep a backup of media files your data is safe on your Microsoft account and will sync back as soon as you set up your phone again using your account login. Contacts are at http://people.live.com and it may also be helpful to know which phone we're talking about here, it seems from your post it is a US model?
Use the Nokia Software Recovery Tool to recover your phone if you have software or software update problems. If your phone is not responding, it appears to be stuck or is not starting you can try to recover it at home before initiating a repair.
Nokia Software Recovery Tool
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

After update now stuck with itunes and plug on screen WHY

after i did the kids udates n the ipod touch 4th the one now has the itunes logo and the plug showing on screen anyone know how to fix

Glitches happens sometimes. You need to connect the iPot to your computer and restore via iTunes.
iTunes: Backing up, updating, and restoring iOS software

Fire event receiver after update list items with PowerShell

Hi,
I have a list with a event receiver attached to it. Also I have a PowerShell script which updates some elements. I noticed that the Event Receiver is not firing after the PowerShell script runs. Is there any way to make it happen?
Thanks anyway!

Hi,
According to your description, my understanding is that the event receiver not fire after you update the item elements.
I suggest you can create a simple event receiver and then test if the event receiver fire after PowerShell run.
Here is my PowerShell script:
$spWeb = Get-SPWeb -Identity http://sp2013sps/sites/test
$spList = $spWeb.Lists["Documents"]
$spItem = $spList.GetItemById(14)
$spItem["Title"] = "Test111"
$spItem.Update()
Here is my event receiver code:
public override void ItemUpdated(SPItemEventProperties properties)
base.ItemUpdated(properties);
Console.WriteLine("event receiver has been done");
After the PowerShell run, it will come out the result:
It means the event receiver has been fired.
Here is a detailed article for your reference:
http://blogs.technet.com/b/speschka/archive/2009/12/25/debugging-event-receivers-in-sharepoint-2010.aspx
Thanks
Best Regards
Jerry Guo
TechNet Community Support

Impact in QAS BI after updating QAS ECC with data PRD ECC

Similar Messages

Maybe you are looking for