Impact of enhancing standard infotypes on service pack upgrade

Hi SAP experts,
I have a situation where in we had enhanced standard infotype 14 ( added custom fields to structure CI_P0014) in development systems and moved to production systems. Now these changes should be moved to project system in which the service pack upgrade is in progress. Will it impact the SP upgrade if I move my transports to these systems? Will it overwrite the sp changes for IT14?
P.S : The support pack was not applied to the system in which the std infotype was enhanced.
Regards,
Sameena

You should re-apply any customer enhancements etc to your development environment after SP's are applied - But only after you have a developer review potential impacts from SP and your development.
I think you would be fine as IT14 isn't updated often in SP's.
Cheers,
Brad

Similar Messages

  • Enhance Standard Infotype 1005 in HR

    Dear All,
    Please suggest how to enhance standard infotype 1005 - Planned Compensation in HR.Transcation PM01 is not allowing to do so ...as no CI include is attached for the same.
    Please guide.
    Regards,
    Subhash

    hi,
      maybe you can achieve your requirement by creating a new custom OM infotype
    ( if the custom information are linked to the OM entity :  org unit, positions.. ) or a new PA infotype ( if the custom information are linked to the employee ) .
    Regards luigi
    Edited by: luigi la motta on Sep 2, 2011 11:46 AM

  • BI Activities in Service Pack Upgrade

    Hi,
    We are upgrading all the systems to the next service pack. Presently BI is on Netweaver Stack 12 and application stack 14. Basis is planning to upgrade the Netweaver stack to 17 and application stack to 19. As part of this upgrade project they would need the activities which can be planned from BI side. Can any one help me to identify the activities need to be planned from BI side during and after the service pack upgrade. Based on this I would need to prepare the estimates for the activities.
    Regards
    Vijay

    No you don't need to stop SQL Services before patching, but you may be required to restart SQL after a patch has been applied for changes to take effect.
    SP installation checks for locked files, it would suggest to stop identified services manually.
    You don't need to do before hand.

  • Workflow errors after service pack upgrade

    Hi all,
    We have a problem with workflows after service pack upgrade. Workflows are working fine in Development system but not on test and production. Generating lot of dumps.
    What could be the reason for this ?
    'Start verification workflow' in SWU3 is giving error 'Workflow: No workflow definition found'.
    Thanks in advance

    Getting series of short dumps 'CALL_FUNCTION_REMOTE_ERROR'
    Error while calling '
      call function 'RH_GET_WFD_ID' destination 'NONE''
    But RFC destinations are working fine.

  • Regarding Enhancing Standard Infotype

    Dear All,
    We have a requirement where in we need to enhance a Infotype which already got enhancement.
    I have added a new field in ci_xxxx include of that infotype through PM01. It alreay has a custom field called A and now I want to add Custom field B. But I do not see that field when I open this infotype using PB30. Please advice whether I need to regenerate this infotype or what I need to do so that existing development ( validations or checks) will not get effected and I should be able to see my field there.
    Thank you very much in advance.
    Waiting for your response.
    Best Regards,
    Amar

    Hello,
    You need to regenerate the Infotype for the new field to reflect in the Infotype screen.Add the custom changes again.
    Hope you have selected both radio button for generating the Infotype for applicant as well employee data.
    Alternate way is you need to add the new field to the Infotype screen manually .You can do this from SE51.From PM01 you can dierctly goto screen painter by chosing the Screen radiobuton.
    Once You have added the field to the screen ,you also need to make the declarations for the field in the module pool program.
    Regards,
    Malathi V

  • Prerequisites for OS service pack upgrade from SAP end.

    Hi All,
    I Have AIX 5.3 OS at TL 08 and Service pack 1 level JS 23 and JS12 blades.
    IBM wants to upgrade it to TL 8 SP7 as the IBM centre supports TL8 SP7 for AIX 5.3 JS23 Blade.
    So we are planning to go ahead with SP enhancement to SP7 from SP1. Are there any pre-requisites from SAP end for upgrading the same.
    Regards,
    Priya

    Check
    Note 1119631 - Using SAP systems with AIX 5.3
    for possible problem/issues with different TLs.
    Also check with your database vendor if the target level is supported.
    Markus

  • AveConnect driver error after SQL Server service pack upgrade

    I am currently testing aveConnect 3.0 (connection optimized) for SQL Server 2000 on a machine we have here.We updated SQL Server with Service Pack 2 & 3 this morning and since then we've been getting the exception below.This is only since we added the service packs to SQL Server,before it worked fine.
    java.sql.SQLException: [Avenir][JDBC SQL Server Driver] Connection refused: connect
    I also tested it with the older version of AveConnect (2.2) which we've been using until recently,and it returned the same error.
    I am currently testing aveConnect 3.0 for SQL Server 2000 on a machine we have here.We updated SQL Server with Service Pack 2 & 3 this morning and since then we've been getting the exception below.This is only since we added the service packs to SQL Server,before it worked fine.If anyonecould provide any advice I would be very grateful,as this is pretty urgent.

    Hi,
    I just contacted the driver vendor (Atinav Inc).heard that aveconnect jdbc driver is now updated to work with latest SQL server fixes from microsoft.
    FYI, aveconnect jdbc driver link http://www.atinav.com/products/aveconnect/aveconnect.htm
    HTH,
    -ashraff.

  • Exchange Server 2013 Service Pack Upgrade - Outlook connectivity issue

    Hi,
    After upgrading to Exchange Server 2013 service pack 1, we are unable to connect via Outlook 2010 or Outlook 2013. Outlook Web Access is working fine though. We have followed all the instructions, and have applied Outlook upgrades, but the issue remain the
    same. Outlook was working fine before the upgrade.
    Have we missed out something. I would highly appreciate if someone can help out? I'm not sure if this is the known issue as I can't seem to find anything on the internet.
    Already applied the transport fix.
    Thanks in advance!

    Hi,
    According to your description, your Outlook 2010 and Outlook 2013 come across the connectivity issue.
    To narrow down the issue, I’d like to recommend the following troubleshooting:
    1. Check if the issue happens on all Outlook users
    2. Check the Outlook Anywhere connectivity by using ExRCA:
    https://testconnectivity.microsoft.com/
    Additionally, MAPI over HTTP is only supported when you use Outlook 2013 sp1 and Exchange 2013 sp1 at the same time. Since the issue also happens on Outlook 2010 client, we can firstly try the above troubleshooting.
    If you have any question , please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Service Pack Upgrade question

    Hey everyone, I hope this is the proper forum for this question.  If not, any direction on that end is appreciated. 
    I am currently in an Enterprise Portal sp12 environment running ESS/MSS sp9.  My client wants to upgrade the ERP backend to Service Pack 35.  What I cannot find out (perhaps due to being seemingly unable to properly navigate the Service Marketplace) is whether or not this ERP upgrade necessitates a move to another Service Pack of ESS/MSS, like sp 14.  We would prefer to not have to, given our time constraints.
    Any help anyone can provide with this would be most helpful.  If I have not clearly stated the issue, I would be happy to clarify. 
    Thanks,
    Justin

    Can you say information about Backend? 35 PL ....
    Try to check if it your releases :
    Note 1243433 - ESS/MSS Component dependencies for ERP6.0 - NW04s
    Note 1007341 - SAP ERP 2004/2005 - supported ESS/MSS system landscapes
    Regards.

  • BPC Service Pack Upgrade

    Hi -
    I am currently supporting BPC 7.5 NW on Service Pack 07.
    The Basis team on my project has confirmed that our sandbox environment for BPC is on SP13. However, when I log onto this environment, there is no prompt to install the upgrade, and it appears that I am still on SP07.
    Are there specific steps the Basis team should perform to enable the install prompt on the front end, and if so what are they?
    Also, assuming I am able to install SP13 for sandbox, will I be able to easily revert back to the older SP on the other environments?
    Thank you.

    Vadim,
    OK, I thinked that you have this information at your hand. How you say it. 
    I have been searching but I have not found it.
    Thanks a lot and sorry for the inconvenients.
    Regards
    Gustavo

  • Service pack upgrade

    Hi Experts,
    while upgrading sql server with the latest service pack, what is the best approach? do we required to stop sql server and upgrade?
    as per my understanding, we need to make sure sql server is up and running while patching. when there is a discussion happend with one of my managers, they do patching for they applications (related to dot net. not sql server), they turnoff all apps, and
    then do upgrade. we never do like this, but i really dont know even this is best practice for sql server. i did not see any document on this.
    please could you suggest on this?
    thanks in advance.
    Cheers, Vinod Mallolu

    No you don't need to stop SQL Services before patching, but you may be required to restart SQL after a patch has been applied for changes to take effect.
    SP installation checks for locked files, it would suggest to stop identified services manually.
    You don't need to do before hand.

  • Service pack upgradation

    Hello all,
    Hope everyone are doing excellent. I required small information.
    We are using Exchange 2010(Without SPs) and we have the below setup.
    1. Two CAS/HUB(installed on same servers) on which we configured CAS Array.
    2. Two MBX servers which are in DAG.
    I want to apply service pack now.
    Currently as SP3 with Rollup 5 is available, can i directly install the same or how it is.
    Also suggest me, what is the process i need to follow based on my setup.
    Best Regards,
        Jay. 
    Regards, Jay.

    Hi Jay,
    yes, please install sp3 and then ru5. Make sure u upgrade CAS first.
    If u r using load balancer then take out HUB/CAS out upgrdae. Check if everything is ok. 
    Then go for 2nd HUB/CAS and then mailbox.
    Also, you need to upgrade schema for this.
    Also, roll back is reinstalling the Exchange. Keep this in mind.
    This article is going to help you.
    http://technet.microsoft.com/en-us/library/bb629560(v=exchg.141).aspx

  • PC Failed after service pack upgrade

    Hi experts,
    Our BI system is recently upgraded to the service pack 23.
    After this we executed our process chain.
    But the PC failed at the step infopackage ( ODS to Infocube ) with the error message
    ======================================
    Error generating program
    Message no. RSAR245
    Diagnosis
    An error occurred during program generation:
    Template:   RSTMPL80
    Error code: 6
    Row:        47
    Message:    Field "/BIC/CCVA8ZECPCO02" is unknown. It is neith
    Procedure
    Correct the template to remove the problem.
    ======================================
    Can anyone please through a light on this.
    Regards,
    Bhadri M.

    Hi,
    Run the RSRV check for the DSO. It will fail. Correct the error from there it will fix the issue. The template at backend has changed since the older versions.
    -Vikram

  • BI 4.1 SP1 to other Service Pack upgrades

    Hi,
    Currenlty we are on SAP BI4.1 SP1 since Dec2013. I see that SAP has released SP2 and SP3. My question is when to make the decision of upgrading to higher service packs? Is it necessary to upgrade if the system is running fine with out any issues? Will I be able to upgrade directly from SP1 to a newer version of BI in future (lets say BI 5.0)?
    we are using a custom build java UI as the front end and the servers are Windows 2008 R2.
    Thanks!

    there is no correct answer that will fit all for this.
    If you have no problems at all in your system and not interested in some new functionalities added in Sp3, then you do not need to upgrade.
    However, if a problem happens or something is not working as expected you might be asked by SAP to upgrade (if the issue is known to not exist in the newer version)...
    It is impossible to say if you'll be able to upgrade directly to BI5 (or whatever new major version name will be).
    it is quite possible you'll be able to upgrade directly to BI4.2 or 4.3, but probably not to Bi4.4 (judging on previous releases, direct upgrade was possible within 2 service packs)... but again, we won't know until those releases are available.

  • Service pack upgradation-rolback plan

    Hi,
    Suppose i upgraded SP from SP2 to SP4 in sql server 2005, What is the rollback plan to reverse to SP2.
    Thanks
    Shashikala

    Hi,
    Suppose i upgraded SP from SP2 to SP4 in sql server 2005, What is the rollback plan to reverse to SP2.
    Thanks
    Shashikala
    You cannot rollback service pack from add remove program in SQL server 2005 . FROM SQL SERVER 2005 onwards you have ficility to remove Service pack from add remove program.
    Check below link as well how to actually remove Service pack
    http://support.microsoft.com/kb/314823
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

Maybe you are looking for