Impact on Keynote 09 after software change into OSX 10.6.2

I noticed unpleasant surprise on my latest slides presentation apparently connected with the just done update to the latest Snow Leopard software version - any of the description (titles) on the individual slides has been lost. They are still visible on the preview (left hand on the screen), but not during showing the particular slide or entire presentation running. I have been used the different fonts than standard ones of the particular sample available from Keynote file. What is more I recognized that for any new Keynote 09 presentation change from such standard fonts generate the phenomenon of unabling to put on any description (title). It would be interested to know whether other forum participants having experenced the similar issues.
Regards,
Tom

I have a similar problem after upgrading to 10.6.2. My keynote will open the file but a couple of slides do not display properly. They show in preview fine, the title displays ok, but most of the text is missing. This happens on only 2 of the 36 slides in the presentation. Using default fonts.

Similar Messages

Unable to authenicate after IP changed into URL

Hi there,
We have Sharepoint 2013, and it has 2nic card, one public and one private IP.
The private IP is used to talked to the DC that's in the same private lan.
We were able to authenticate and get into the sharepoint perfectly fine when it was IP based, as soon as we changed in into the URL, and access it via URL, it is not taking our authentication at all.
I feel like it is trying to do authentication from outside to inside, because I don't even see the log on my DC at all.
Why is this happening by changing from IP based to URL...
Thanks!

Figured it out. Thanks tho!
Apply the following registry change to the file server to which you installed the hotfix. To do so:
Start Registry Editor (Regedt32.exe).
Locate and click the following key in the registry:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanmanServer\Parameters
On the Edit menu, click Add
Value, and then add the following registry value:
Value name: DisableStrictNameChecking
Data type: REG_DWORD
Radix: Decimal
Value: 1
and then you can create a registry key, back connection host namehttp://support.microsoft.com/kb/896861
Click Start, click Run,
type regedit, and then click OK.
In Registry Editor, locate and then click the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0
Right-click MSV1_0, point to New,
and then click Multi-String Value.
Type BackConnectionHostNames, and then press ENTER.
Right-click BackConnectionHostNames, and then
click Modify.
In the Value data box, type the host name
or the host names for the sites that are on the local computer, and then click OK.
Quit Registry Editor, and then restart the IISAdmin service.

Lost ALL access privileges after software change

I have a G4 running 10.4.3 Tiger. It began to act unstable--contant freezes, etc--and out frustration I loaded the only software I could find (OS X 10.3) and as a result, solved the freezing but lost user access to everything I have--IPhoto, iTunes, movie files, etc etc. iPhoto won't even launch! How do I regain access to the files? I bought the Mac used, and the original user accounts were set up by the previous owner, so I don't know passwords, user names, etc. Help!

Tough to figure what a 10.3 install might have done with the 10.4 files, Downgrades by a whole point were never figured in.
First, Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when done.
Then I'd get EasyFind...
http://www.versiontracker.com/dyn/moreinfo/macosx/8707
Search your whole drive for some personal files, or some extension like .mp3 to see if/where they are.

HP scanner showing read only from Mac after software upgrade to OSX 10.9.1

I recently updated my IMAC software to OSX 10.9.1 and I am unable to scan and sent material from my HP Photosmart scanner. It says it is "read only". How can I change so that I can scan and email documents?

http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03967500

How to change number of retries and delay before retrying after software install failure

I deploy a software to client, but the installation is fail, so it will retry. but How to change the number of retries and delay before retrying after software install failure?
I find "Retry Settings" in "Software Distribution Component Properties". But I think it work for Distribution, not the installation. am I right?

First, are you referring to packages or applications because the behavior is different.
Also, why do you want it to retry a failure? It failed for a reason so you need to fix the cause of the failure first. If it failed the first, it will likely fail the next time for the same reason. In general, ConfigMgr will only retry on transient type
errors.
Jason | http://blog.configmgrftw.com

My ipod was stolen and i finnaly was able to get into my account after they changed the password is there a way i can fid the locaition of my ipod even if it has died ?

my ipod was stolen and i finnaly was able to get into my account after they changed the password is there a way i can fid the locaition of my ipod even if it has died ?

No. The only way is if the FindMyiPod feature was already set up and wifi is on. However, that can be defeted by turning the iPod off or restoring it. If they have access to the iPod then can just turn the feature off.
If the iPod off/battery drained how would you expect there t be a way of finding it?
Apple will not help.

After software update I can't drag from iTunes directly into Garageband timeline, always could before, how can I fix this?

After software update I can't drag songs from iTunes directly into Garageband timeline, always could before, how can I fix this?

Same problem here but figured it out: Drag the song from the Media Browser tab (after selecting iTunes at the top) at the bottom right when you open a new GarageBand project. Hope this helps you -- working perfectly for me!

Headphones no longer work after being plugged into speaker

Hi i purchased a ipod touch 5th generation 32 gb bundle from target just over a week ago which came with the iCoustic 20 in 1 Accessory kit Model No : IC184. After plugging the ipod into the supplied speaker this morning trying to listen to music it kept making stacic like noises and changing volume it was alwful to try and listen so gave up and went back to taking it off speaker and playing it back through apple headphones but now after being plugged into the speaker the headphones wont work its just a buzzing sound if you turn the volume up all the way loud the music will come back through headphones then when turning it down it cuts out again or if you manage to get the music it will stop after a couple of seconds. I have done a factory reset but it has made no difference.Please help have a very upset daughter it is frustrating do we take this back for a refund and get a new one if so how do we keep the music and photos etc she has on this one? Thankyou.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.

My ipod works in itunes but does not appear in "my computer" after I changed the properties

My ipod works in itunes but does not appear in "my computer" after I changed the properties.
First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
Any help would be very much appreciated. Thanks.

Hi,
To show up in Windows Explorer, you can try placing the iPod into
disk mode.
Moreover, i recommend you to
restore ipod to factory settings.
If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
Here is an article you can refer to below:
http://support.apple.com/kb/TS1369
To get more help, you can also redirect to apple support forum:
http://www.apple.com/support/ipod/
Thanks!
Andy Altmann
TechNet Community Support

Blank screen after a change in the motherboard's Bios

Hi,
Recently, I have bought a MSI motherboard - 865PE Neo2 FIS2R. The computer works fine after I installed all the components and applications (including Windows XP [included Service Pack 1], Intel Chipset Software Installation Utility and all the drivers), as well as updating the bios to the most recent version.
However, after I changed one of the bios settings as follows:
1. Select Frequency/Voltage Control.
2. Select Performance Mode
3. Select Ultra-Turbo
then I try to quit and choose Exit & Save Changes and press the Enter key on the keyboard. Immediately after, the screen fails to show anything.
The reset button on the computer case also fails to response (the reset button works before this incident). So, I shut down the computer, wait for a while and then power it up again, the monitor still does not show anything. Also, I do not hear any special beep sound. At that time, all the fans in the case (including CPU fan, system fans, power fans and video card fan) are moving. Here are the things that I have also tried:
1) I have tried the monitor and video card separately on another computer and both the monitor and video card work fine.
2) Also, I have tried to clear the CMOS following the procedure mentioned in the manual jumper but the screen still fails to show anything.
Here is my computer's configuration:
Motherboard : 865PE Neo2 FIS2R (Bios version 1.4)
CPU : Intel Pentium 4 2.8CGHz (800 FSB)
Memory : Crucial PC3200 512MB CL3 (two of these)
Graphic card : 128MB Crucial Radeon 9800 Pro
Hard disk : IBM DTLA-307030
Case : Thermaltake Xaser III V1000A Black
Power Supply : TruePower 380 12V AC 380W ATX TRUE380PGB
Therefore, may I know if the problem is solvable and what caused the problem. Also, I have just bought the motherboard for about 2 weeks, should I go back to the retailer to get a replacement?
Thank you anyone whom may help.

The difference in the performance modes above SLOW is the DRAM SPD timings used ...seems yours is unstable at the Ultra-turbo settings (you may be able to use this setting if you increase your DDR voltage slightly though (I use 2.7v for my CORSAIR)) ...only trouble is gaining access to the BIOS to do this
A few things you can try:-
Use only a single stick of memory -go into BIOS and increase the DDR voltage or reduce the performance setting
If that fails and you have another type of DDR available try using a single stick of that instead (DDR 2700 has worked for me in the past) ...this will force your motherboard to boot at the SLOW timings -you can then enter the bios and increase the DDR voltage, save, shutdown and reinstall your memory.
Try booting with the "Insert" key pressed to force the BIOS defaults to be used
Remove the power cord press the "start" button a few times (to discharge any power left in the PSU) remove the CMOS battery and set the jumper to the "CLEAR" position ...have a cup of tea (or coffee) ...reset the jumper, install the battery, insert the power cord, cross your fingers and BOOT?

Windows failed to start. A recent hardware or software change... Bootcamp

Hello everyone, I really need help...
I have a MacPro, Snow leopard, BootCamp 3.1. I installed Windows Vista Ultimate on Bootcamp. I also use Vista home on Parallels 6 (this might be a factor, I don't know yet).
Everything was fine. After a few days, when I tried to start up my mac in Vista via Bootcamp, I get a black screen from windows (windows boot manager), telling me a recent hardware or software change might be the cause. File: \Boot\BCD Status:0xc000000f An error occurred while attempting to read the boot configuration data.
After that, the system freezes.
When I start back up in OS X, I open the BootCamp Drive... and nothing is on there. Unmounting and mounting doesn't help. Before I was able to see the files. The only way to repair is to delete and make a new partition. I have 3 HDDs so I decided to dedicate a complete single, physical drive to Windows. Same thing after 3 days. Programs I used under Mac OS X were Parallels, Dragon Age, Steam. But nothing which should write or delete the Windows Boot.
What is the problem, anyone else experiencing the problem? It is a pain, cause re-installing it every 4 days and updating it all takes half a day.

At this day and age, I'd dump Vista.
You can:
try safe boot
run sfc /scannow
restore to last restore point
rollback driver update
run chkdsk and attempt to fix bad blocks
boot from your Vista DVD and use System Repair features
run out and buy Windows 7 Pro x64
Ask Paralells forum
I have been using Windows 7 Beta, RC and release rock solid on Mac Pro and two PCs.
You tried Bing I hope. Quite good hits.
http://www.bing.com/search?q=Boot%5CBCD+Status%3A0xc000000f
There are currently two ways of repairing the Windows Vista bootloader:
1.With EasyBCD via the Diagnostics Section.
(Recommended, Easy to use and guaranteed results)
2.By booting from the Windows Vista DVD and using the recovery console.
(Use if you cannot boot into any version of Windows to use EasyBCD)

Freezing/Crashing in sleep or hibernate mode after hardware change

Hello. To get right to the chase, I have this envy 15 series laptop. It came with a 768GB hdd, which I upgraded to an SSD (512GB one) Recently, I decided to downgrade the storage back to the original hdd the laptop came with. I was obviously expecting my system's performance to decrease, especially with boot times and what not, but I was also expecting the performance to be the same as what it was when I originally received my laptop, more or less. However, this has not been the case. The laptop's performance has greatly suffered after reinstalling the *originaly hdd this laptop came with* Issues: Boot up times are ridiculously slow now. I mean, so slow that I figure I should go downstairs and have a drink while I wait for it to boot slow. It was never even remotely this slow, before or after upgrading to my ssd. When the pc goes to sleep, it does not wake up. Perhaps it would wake up if I left it alone for a few hours, but I'm not willing to do that, and no one should be. I'm also speaking literally right now. I have to force my laptop off and then turn it on normally in order to boot back from "sleep" mode. I've since had to turn off automatic sleep. If I close the lid to let my laptop hybernate, it does not recover. When I turn it on, it looks like it will return from hypernate, but it does not. It turns itself off. When I turn it on again, it boots normally, but it does so as if I had shutdown the pc and then booted back up. It takes windows a long time to login, and get everything running so that the pc runs normal. None of this is normal. This pc has absolutely no excuse to be running this slow. It never has, and it only started after switching back to my hdd. What I did: I cloned my HDD onto an SSD. In case it matters, I used Acronis true image to do it. Last night, I switched back, and used the same software to clone my SSD back into my HDD. I'm not sure if this is relevant, but there you go. I used sector writes to clone the SSD back into the HDD. I think I did the same to clone the HDD into the SSD the first go around, as I seem to recall having issues with the automatic clone last time as well as this time, but I'm not 100% positive. Troubleshooting steps I've taken: I first ran a complete chkdsk /r in order to fix any problems, and then allow me to extend my C drive for all of the free space my disk now had, due to cloning a smaller drive. I then did a full defrag and optimize on my disk. Finally I ran winsat to recheck my hw's performance, and let windows know that I no longer had an SSD but rather an HDD. This turned superfetch back on, and I confirmed that it was now running again. I'm not really sure what else to do.

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP ENVY 15-j171nr Notebook and issues with Freezing/Crashing in sleep or hibernate mode after hardware change. Here is a link on performance issues. I recommend to restore the BIOS defaults.You could restore the BIOS with this document selecting the reloading the BIOS default settings which has helped others. I hope this helps. Thanks.

Impact on profit ctr after activation of New GL

Hi,
I would like to know,what is the impact on profit ctr after activation of New GL?
Thanks in advance
Prasad

The following OSS note will be of some help in addition to online help documentation
For release SAP ERP, the Profit Center Accounting was integrated into the new G/L accounting. The solution is as follows:
SAP delivers the 'Profit Center' and the 'Partner Profit Center' as fixed characteristics that are posted on the original FI postings. The data is not updated in another ledger as in the classic Profit Center Accounting.
As a result of integration of the Profit Center Accounting into the new G/L accounting, new functions such as 'Document Splitting' are available. Using the function 'Document Splitting' (online document split), you can create balance sheets for company codes as well as for other entities such as the profit center. The balance is then set to 0 for each document for the profit center.
Integrating the G/L accounting and the Profit Center Accounting into the one application also removes the time and effort needed to reconcile G/L accounting and PCA.
When implementing the new G/L accounting in Release SAP ERP, we recommend that all new customers map the Profit Center within the new G/L accounting by activating the scenario FIN_PCA (profit center update). It is not advisable to activate the classic Profit Center Accounting in parallel and consequently update parallel data volumes.
Detailed information about setting Profit Center Accounting in the New General Ledger:
Define the update of the characteristics 'Profit Center' and 'Partner Profit Center' in the ledger by selecting the scenario 'Profit center update' (Customizing: Financial Accounting (New) -> Financial Accounting Basic Settings (New) -> Ledgers -> Ledger -> Assign Scenarios and Customer-Defined Fields to Ledgers).
If you want to use the document splitting, you can define the field 'Profit center' as a splitting characteristic in the document splitting (Customizing: Financial Accounting (New) -> General Ledger Accounting (New) -> Business Transactions -> Document Splitting -> Define Document Splitting Characteristics for General Ledger Accounting). Set the 'Zero balance' indicator again for the added field 'Profit Center'. You can now create balance sheets on the profit center. You must also activate the Mandatory Field check to ensure that the profit center is set in all postings. If you want to display balance sheet items at profit center level (for example, receivables and payables) but you do not require complete balance sheets, we recommend that you do not set the indicator 'Zero balance' and 'Mandatory Field check'.
If you already used classic Profit Center Accounting as an SAP R/3 customer but you now want to use Profit Center Accounting in the new general ledger, you can continue to use classic Profit Center Accounting in parallel to the profit center update scenario in the new G/L accounting in the interim. However, we do not recommend you do this on a long-term basis due to the increased data volume and the increased time and effort required.
However, if the classic Profit Center Accounting continues to play a leading role for you, we recommend that you do not activate the document splitting in the new G/L accounting, and not for other entities such as the segment either. This is because the classic Profit Center Accounting uses certain functions of the classic general ledger that are no longer available with active document splitting (for example, transaction F.5D, Calculate Balance Sheet Adjustment).
See the following information for details about the differences between the function of PCA in new G/L accounting and in classic PCA and for details about the effects of new G/L accounting on the posting behavior in classic PCA. Even if mapped into new G/L accounting, PCA always occurs within a controlling area. SAP does not support cross-controlling area PCA. The derivation of profit center and partner profit center with the different business processes when you use the new G/L Accounting is identical to the classic Profit Center Accounting. Details about the differences are available in the following.
1. Set the proposal profit center for additional balance sheet and P&L accounts.
Release SAP ERP 2004:
           Profit center scenario in the new G/L accounting is active, classic Profit Center Accounting is not active: If you have to set a profit center on balance sheet and P&L accounts, make entries manually, use FI substitution or implement the BADI AC_DOCUMENT. Note that the system calls the BADI AC_DOCUMENT only for postings using the accounting interface (for example, MM and SD postings), but it is not called for FI postings.
           Profit center scenario in new G/L accounting and classic PCA is active: Transactions 3KEH and 3KEI are available in the classic Profit Center Accounting for maintaining a proposal profit center for balance sheet accounts and P&L accounts. Transactions 3KEH and 3KEI also exist in SAP ERP2004 and function in the same way as in R/3: In other words, you can use the settings in transaction 3KEH to control the update in classic Profit Center Accounting, and the transactions set a proposal profit center where necessary. Keep in mind that the profit center information is therefore affected in new G/L accounting by settings in classic Profit Center Accounting.
Release SAP ERP 2005:
           Transactions 3KEH and 3KEI (from classic Profit Center Accounting) for maintaining proposal profit centers for balance sheet and P&L accounts are no longer used to set the profit center.
           Profit center scenario in the new G/L accounting is active, classic Profit Center Accounting is not active: If you have to set a profit center on balance sheet and P&L accounts, make entries manually, use FI substitution or implement the BADI AC_DOCUMENT. Note that the system calls the BADI AC_DOCUMENT only for postings using the accounting interface (for example, MM and SD postings), but it is not called for FI postings. In addition, the new transaction FAGL3KEH and the BAdI FAGL_3KEH_DEFPRCTR are available for maintaining proposal profit centers. You can use these new functions to determine a proposal profit center depending on the company code and the account. Note that this proposal profit center does not appear on the input screen; it is derived only when you post the document. The proposal profit center is used if the line item does not contain a CO account assignment and if the profit center was not already determined elsewhere.
           Profit center scenario in new G/L accounting and classic Profit Center Accounting are active: The entries of transaction 3KEH control ONLY the transfer of line items to classic Profit Center Accounting. Transaction 3KEI is no longer relevant. To set the profit center, use the options which are available in the new G/L accounting (make entries manually, use FI substitution, or implement the BADI AC_DOCUMENT).
2. Derivation of the partner profit center
Release SAP ERP 2004:
           Profit center scenario in the new G/L accounting is active, classic Profit Center Accounting is not active: Transactions 8KER/8KES are no longer available. Notes 997925 and 1087350 provide the functions from transaction OCCL. Alternatively, you can use the BAdI AC_DOCUMENT to set the partner profit center.
           Profit center scenario in new G/L accounting and classic PCA is active: Transactions 8KER/8KES and OCCL (reading purchase order/sales order for affiliated companies) are active. However, we recommend that you no longer use transaction 8KER or 8KES. Partner profit centers derived using these transactions are available in both classic Profit Center Accounting and in New General Ledger Accounting only if the line is relevant in classic Profit Center Accounting.
Release SAP ERP 2005:
           Profit center scenario in the new G/L accounting is active, classic Profit Center Accounting is not active: Transactions 8KER/8KES are no longer available. Notes 997925 and 1087350 provide the functions from transaction OCCL. Alternatively, you can use the BAdI AC_DOCUMENT or the new BAdI FAGL_DEFPPRCTR (enhancement spot FAGL_LEDGER_CUST_DEFPRCTR) with the method SET_DEFAULT_PART_PRCTR to set the partner profit center.
           Profit center scenario in new G/L accounting and classic PCA is active: Transactions 8KER/8KES and OCCL are active. However, we recommend that you no longer use transaction 8KER or 8KES because partner profit centers derived using these transactions are available in both classic Profit Center Accounting and in New General Ledger Accounting only if the line is relevant in classic Profit Center Accounting. Instead, if required, you should use the BAdI FAGL_DEFPPRCTR to set the partner profit center. A partner profit center determined in this way is always updated both in new G/L accounting and in classic Profit Center Accounting.
3. Displaying receivables and payables for each profit center
Document splitting is active
           The detailed information from the general ledger view about receivables and payables split online from the document splitting is NOT available for classic Profit Center Accounting. In this case, you CANNOT split receivables/payables nor follow-up costs subsequently (Transaction F.5D - report SAPF180A, Transaction F.50 - report SAPF181, Transaction F.05 - report SAPF100). This means that you CANNOT use transaction 1KEK to transfer receivables and payables to classic Profit Center Accounting. Follow-up costs split according to source can be transferred online to the classic Profit Center Accounting because these are already available in the data entry view.
           Read the documentation of the document splitting carefully. Analyze in which cases you have to set default account assignments because the document splitting is sometimes prevented by default account assignments.
Document splitting is not active
           In this case, you CANNOT display the receivables and payables according to source at profit center level within the new G/L accounting. However, you can use the old split of the receivables and payables within the classic Profit Center Accounting (transaction F.5D) as well as of the follow-up costs (transaction F.50), and you can use the periodic transfer of receivables and payables using transaction 1KEK. However, you can execute the new report for the foreign currency valuation of the open items (report FAGL_FC_VALUATION) with depreciation areas only, which means that the documents are no longer updated (valuation difference not updated in BSEG-BDIFF). As a result, transaction 1KEK copies only the original receivables/payables, independently of transaction 2KEM 'Account Valuation Differences'; in other words, the original data is not corrected by the valuation differences.
           You can use the standard report groups 8A98 and 8A99 to display the open receivables and payables in classic Profit Center Accounting.
4. Periodic transfers of asset portfolios to classic Profit Center Accounting
              As of Release 4. 7, it is possible to map a parallel reporting mapped in FI (for example, parallel accounts) for parallel depreciation areas in Asset Accounting by using particular settings (defining an accounting principle). You must stop the execution of transaction 1KEI because it would result in duplicated data in PCA because of postings to the same accounts. You must also stop transaction 1KEI with a 'different company code' or a 'different depreciation area in the different company code' because the data cannot be transferred correctly. Transaction 1KEI terminates with the error message KM 764. As of Release SAP ERP, if the new general ledger accounting is active, the system issues the message FAGL_LEDGER_CUST 076.
5. Dummy profit center on P&L accounts
              You use transactions 3KEH and 3KEI to firstly try to determine a proposal profit center in classic Profit Center Accounting for document line items with a P&L account (no cost element) and without a profit center account assignment. If the system does not find a proposal profit center, the dummy profit center is set for some activities (primarily from Logistics). If the new G/L accounting is active AND if at least one of the two characteristics 'Profit Center' and 'Segment' is used in the document splitting, the routine for setting the dummy profit center will no longer run (see Note 820121 and 832776). Otherwise the document splitting would not split a document, or not split it correctly. The system must then find the profit center that is valid for the process using the document splitting or another derivation. If this is not the case, the document line item will not be updated in the classic Profit Center (document line items with Profit Center initial are not allowed in the classic Profit Center Accounting).
6. PCA additional rows
              If you map Profit Center Accounting in new General Ledger Accounting in SAP ERP, you can use consulting note 937872 to update PCA additional lines recognized from classic Profit Center Accounting in new General Ledger Accounting.
              If you use the transfer price functions, you do not require Note 937872 because the structure of the PCA additional lines are technically "true" and are automatically posted in new General Ledger Accounting when maintained in transaction 0KEK.
7. Substitution of profit centers in sales orders
              Transactions 0KEL and 0KEM are available both in the classic Profit Center Accounting and in the new G/L accounting (Customizing: Financial Accounting (New) -> General Ledger Accounting (New) -> Tools -> Validation/Substitution)
8. Reporting
Line item reporting within the new G/L accounting
           Release SAP ERP 2004: Even if document splitting is set with the characteristic Profit Center, only one restricted line item reporting to profit centers is available in this release at present. When you use the G/L account line item list of FI, you can limit profit centers for line item settlement G/L accounts that are not relevant for the document splitting. As of Support Package 10, line item reporting to profit centers and segments is available.
           Release SAP ERP 2005: Line item reporting according to profit centers and segments is available.
Ledger reporting within the new G/L accounting
           Release SAP ERP 2004: Even if the document splitting is set with the characteristic profit center or segment, no current account reporting to profit centers and segments is available up to Support Package 10. With Support Package 10, current account reporting according to profit centers and segments is available. Also see the detailed explanations for Release SAP ERP 2005.
           Release SAP ERP 2005: Current account reporting according to profit centers and segments is available. It replaces the standard report groups 8A98/8A99 in earlier releases. However, the difference is that the foreign currency valuation correction is no longer displayed for each item because no update of the valuation in items occurs through the foreign currency valuation in the new general ledger (no BDIFF/BDIFF2 update). It is a key date-related valuation (mostly for the period end).
9. Transfer prices
              The transfer price functions (multiple valuations) are available for new General Ledger Accounting as of SAP ERP 2005. For SAP ERP 2004, see the release restrictions in Note 741821. In SAP ERP 2004, you can use the transfer price functions or multiple valuation functions only if you have activated the classic General Ledger and classic Profit Center Accounting.
10. Creating the profit center standard hierarchy
Release SAP ERP 2004: You must create the highest node of the standard hierarchy in the Customizing of the classic Profit Center Accounting (transaction 0KE5), even if you are not using classic Profit Center Accounting.
Release SAP ERP 2005: To create the highest node of the standard hierarchy, use transaction SM30 with the maintenance view V_FAGL_PC_STHR.
11. Creating the dummy profit center
Classic Profit Center Accounting is active (regardless of whether classic G/L accounting or new G/L accounting is active):
           If the classic Profit Center Accounting is active, you must create a dummy profit center to avoid postings with an initial profit center in the database tables of the classic PCA.
           If the new G/L accounting is also active AND if you are using at least one of the two characteristics 'Profit Center' and 'Segment' in the document splitting, you have to ensure in Release SAP ERP 2004 that Notes 820121 and 832776 are included. In Release SAP ERP 2005, the changed posting logic is included from the beginning. Note that the update of document line items in classic Profit Center Accounting is omitted because of this.
Classic Profit Center Accounting is not active, New G/L Accounting is active and you are using at least one of the two characteristics 'Profit Center' and 'Segment' in the document splitting:
           You do not have to create and use a dummy profit center. Using the dummy profit center can cause situations you want to avoid: For example, the system splits receivables/payables to the dummy profit center because of the document splitting (you cannot transfer them manually), or a document line item with dummy profit center account assignment is not split by the document splitting. To ensure that a profit center is assigned in all rows, set the profit center as mandatory field in the Customizing of the document splitting. However, note that this can also lead to terminations while posting, if a profit center assignment is missing.
12. Compare G/L Accounts in FI with Profit Center Accounting (Transaction KE5T)
              In classic Profit Center Accounting, transaction KE5T is used to compare account balances. In this transaction, the ledgers to be compare are fixed. If you use Profit Center Accounting in new General Ledger Accounting, use the general transaction GCAC. You can enter any base ledger and any comparison ledger.
Header Data
Release Status: Released for Customer
Released on: 10.09.2007 10:54:03
Priority: Recommendations/additional info
Category: Consulting
Primary Component: EC-PCA Profit Center Accounting
Secondary Components: FI-GL General Ledger Accounting
Releases
Release Independant
Related Notes
1087350 - NewGL: Reading partner profit center in reversal
1018065 - NewGL: activating "segmentation" scenario
997925 - Read partner profit center in NewGL
966000 - mySAP new general ledger and Joint Venture Accounting
937872 - NewGL: internal revenues between profit centers
895923 - Active indicator of PCA in CO-PA derivation
853169 - ALLOCATION: Actual cycles can only be executed periodically
820121 - Document splitting does not work for segment
764841 - No profit center derivation for active flexible GL
756146 - mySAP ERP new General Ledger: General information
741821 - Release limitations concerning SAP ERP 2004
217338 - Number of profit centers
Print Selected Notes (PDF)

Mac rebooting into OSX instead of windows after unexpected shutdown

Got a bit of a strange issue here.
I've set a mac mini that is running windows server software to always boot into the windows partition through "startup disk" in sys prefs. It does this just fine when properly shut down or restarted, but always boots back into OSX if the power down is unexpected. Of course, one might say, well hold down the "option" key when it restarts and choose where you want to boot to, but this machine will often be left unattended, and it NEEDS to go right back into Windows if that happens.
Your thoughts?

You are right, S3 mode for sleep seems to have changed with Windows 7 SP1
SSD seems to be linked to having problem for some
Some go back to pre-SP1
It would probably take a while to find a fix, after someone knows what and how it happened and can be tested.
The likelihood of BIOS update on PC is real, happening on a Mac with EFI and / or SMC firmwware updates highly unlikely.
It is annoying. I thought it was a bad cable or wire, swapped out my PSU for a larger one I had sitting around. Moved Windows off SSD RAID to mechanical drive. I was beginning to think my motherboard was at fault, because two other systems, a Mac Pro running 7 SP1 and PC, both using single SSD for OS, do not exhabit any problem with sleep modes, even if I let it go longer.
Disable or uninstall.

Problem restarting after software update

Computer is fine, drive 40% full, no speed problems...
But it just won't restart after software update runs, nor will it restart or shut down from finder.
Problem solving so far: Safe boot, reset pram, ran disk utility, ran disk repair using install disk, ran fsck -y, ran disk warrior.
Is annoying. ANy ideas anyone? If not, what is the procedure for updating using sudate and terminal, as when I use software update, a force shut down will not install.
ANy ideas folks?

Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Impact on Keynote 09 after software change into OSX 10.6.2

Similar Messages

Maybe you are looking for