Implement NOT IN logic in OWB mapping

Hello All
My new requirement is to implement the following query in my OWB 10g R2 mapping
SELECT * FROM A MINUS SELECT * FROM B
UNION ALL
SELECT * FROM B WHERE ((C1,C2) not in (select C1,C2 from A))
A and B are DB tables and C1 and C2 are the primary columns.
Kind and quick help is highly appreciated.
Reg
Shaik

Just to simplify your query, It may look like following.
select C1, C2 from
(select C1, C2 from A
MINUS
select C1, C2 from B
I believe, now you can translate the query into mapping using 'SET OPERATORS'

Similar Messages

How to implement subquery in OWB mapping

I am trying to build a mapping (OWB 10gR2) which uses a single driver table (COLLEGE) and requires additional columns from 2 other tables (CONTACT and DEMOGRAPHIC) which have a many-to-one relationship with the driver table. The output should be a single record for each record in the driver table.
For the join to the CONTACT table I only want to return the first record found. The join for the DEMOGRAPHIC table should return the record with the MAXIMUM year. In SQL I would handle these relationships via subqueries. Here is a sample of the SQL that I would use:
select college_CODE,
college_DESC,
contact_NAME,
contact_PTYP_CODE,
demographic_DEMO_YEAR,
demographic_CALENDAR_TYPE,
demographic_ACCREDITATION_TYPE
from college, contact, demographic
where college_code = contact_sbgI_code
AND contact.ROWID = (SELECT MIN(A.contact.ROWID)
FROM contact A
WHERE A.contact_SBGI_CODE = college.college_CODE )
AND college.college_CODE = demographic.demographic_SBGI_CODE
And demographic.demographic_DEMO_YEAR = (SELECT MAX(B.demographic_DEMO_YEAR)
FROM demographic B
WHERE B.demographic_SBGI_CODE = college.college_CODE)
How do I implement this logic within OWB? Is there any way to do it without using views?
Thank you in advance!
Chuck

Hi,
Try this way....join college and contact tables (if u r maintaining history in contact table use the dates also to join) and get the min of effective date form the contact table thru the aggregator...this will give u the first record....then join the result with the DEMOGRAPHIC table and get use the aggregator to get max of the year...this should give u the right result...
Regards
Bharath

Transformations not occuring properly using PIVOT operator in OWB mapping.

Hi ,
In our project we have a OWB Map UII_D_MAP_SPC_CUST_FAULT_NATTR which is used to populate UII_CUSTOMER_FAULT table in our target side.
The source table which populate UII_CUSTOMER_FAULT is SR_S_TABLE_N_ATTRIBUTEVALUE (a materialized view in another External Db)
This Mview has 2 columns: S_N_STRINGVALUE & N_NAME.
When N_NAME is 'FAULT_REPORT_CODE' the corresponding S_N_STRINGVALUE value should populate the REPORT_CODE field in UII_CUSTOMER_FAULTin the target sde.
This source to target transformations is being done by using UNPIVOT operator in this mapping UII_MAP_SPC_CUST_FAULT_NATTR.
In ideal case when S_N_STRINGVALUE is NOT NULL, REPORT_CODE value should be populated with the value of source field value (ie the value of S_N_STRINGVALUE) and when S_N_STRINGVALUE is NULL , REPORT_CODE should be populated with 'XX'.
But in some cases REPORT_CODE value in UII_CUSTOMER_FAULT table is populated as NULL when S_N_STRINGVALUE is NOT NULL
which should not happen.
We suspect that there is some prpblem in the UNPIVOT operator, but we are not able to track down the exact location where it is failing. Can you please help in resolving this problem?
Shall we remove Unpivot operator and use CASE statement in some package that will be called through Expression operator?
Please advise.
Regards
Arinjit Dhar

Arinjit,
Have got any solution forthis. Today I ran into exactly the same problem. If you have got the solution, can you please post it in the forum.
Ott Karesz,
I have posted my SQL which got generated. The problem is when I am running the SQL just for the particular data set, it is giving the output properly. But what confuses me more is, when I run the mapping just for few records, it is populating the values correctly, but when running the mapping for all the records, then it populates null values for those records.
Generated SQL:
INSERT
INTO
"TB_PIPE_1"
("ASSETNUM",
"SITEID",
"TYPE",
"STATUS",
"YEARLAID",
"MATERIALCODE",
"PRESSURECODE",
"DIAMETER",
"METHODLAID",
"JOINTTYPE",
"SDRCOL",
"LENGTHLAID",
"LENGTHDIGITISED",
"MEASUREUNITID")
SELECT
"UNPIVOT"."ASSETNUM" "ASSETNUM$1",
"UNPIVOT"."SITEID" "SITEID$1",
"UNPIVOT"."CLASSIFICATIONID" "CLASSIFICATIONID$1",
"UNPIVOT"."STATUS" "STATUS$1",
"UNPIVOT"."YEAR_LAID" "YEAR_LAID$1",
"UNPIVOT"."MATERIAL" "MATERIAL$1",
"UNPIVOT"."PRESSURE" "PRESSURE$1",
"UNPIVOT"."DIAMETER" "DIAMETER$1",
"UNPIVOT"."METHODLAID" "METHODLAID$1",
"UNPIVOT"."JOINTTYPE" "JOINTTYPE$1",
"UNPIVOT"."SDR" "SDR$1",
"UNPIVOT"."LENGTHLAID" "LENGTHLAID$1",
"UNPIVOT"."LENGTHDIGITESED" "LENGTHDIGITESED$1",
"UNPIVOT"."MESUREUNIT" "MESUREUNIT$1"
FROM (SELECT
"ASSETNUM" "ASSETNUM",
"SITEID" "SITEID",
"STATUS" "STATUS",
"YEAR_LAID" "YEAR_LAID",
"CLASSIFICATIONID" "CLASSIFICATIONID",
MIN(CASE WHEN "ASSETATTRID" = 'MATERIAL' THEN "ALNVALUE" ELSE NULL END) "MATERIAL",
MIN(CASE WHEN "ASSETATTRID" = 'PRESSUREREGIME' THEN "ALNVALUE" ELSE NULL END) "PRESSURE",
MIN(CASE WHEN "ASSETATTRID" = 'DIAMETER' THEN "NUMVALUE" ELSE NULL END) "DIAMETER",
MIN(CASE WHEN "ASSETATTRID" = 'METHODLAID' THEN "ALNVALUE" ELSE NULL END) "METHODLAID",
MIN(CASE WHEN "ASSETATTRID" = 'JOINTTYPE' THEN "ALNVALUE" ELSE NULL END) "JOINTTYPE",
MIN(CASE WHEN "ASSETATTRID" = 'SDR' THEN "ALNVALUE" ELSE NULL END) "SDR",
MIN(CASE WHEN "ASSETATTRID" = 'LENGTHLAID' THEN "NUMVALUE" ELSE NULL END) "LENGTHLAID",
MIN(CASE WHEN "ASSETATTRID" = 'LENGTHDIGITISED' THEN "NUMVALUE" ELSE NULL END) "LENGTHDIGITESED",
MIN(CASE WHEN "ASSETATTRID" = 'DIAMETER' THEN "MEASUREUNITID" ELSE NULL END) "MESUREUNIT"
FROM (SELECT
"MV_PIPE"."ASSETNUM" "ASSETNUM",
"MV_PIPE"."SITEID" "SITEID",
"MV_PIPE"."STATUS" "STATUS",
"MV_PIPE"."YEAR_LAID" "YEAR_LAID",
"MV_PIPE_SPEC"."ASSETATTRID" "ASSETATTRID",
"MV_PIPE_SPEC"."NUMVALUE" "NUMVALUE",
"MV_PIPE_SPEC"."ALNVALUE" "ALNVALUE",
"MV_PIPE_SPEC"."MEASUREUNITID" "MEASUREUNITID",
"MV_PIPE"."CLASSIFICATIONID" "CLASSIFICATIONID"
FROM "MV_PIPE_SYN" "MV_PIPE",
"MV_PIPE_SPEC_SYN" "MV_PIPE_SPEC" WHERE "MV_PIPE"."ASSETNUM" in ('466651706','606703143') and ( "MV_PIPE"."ASSETNUM" = "MV_PIPE_SPEC"."ASSETNUM" )) "OUTGRP1"
GROUP BY
"ASSETNUM", "SITEID", "STATUS", "YEAR_LAID", "CLASSIFICATIONID") "UNPIVOT"

Can not run OWB Mapping automatically by OEM? . Very urgent. Pls help me

Hi all,
Pls help me.
I am using OWB 10g under Oracle 10g. I want to run OWB Mapping automatically by OEM.
I installed Oracle Database 10g fully but don't have OEM in this. After that, I installed Oracle Client 10g. In this product, there is OEM 10g. I read some topic as "want to run owb mappings thru job schedule" and also read http://otn.oracle.com/products/warehouse/htdocs/oem_scheduling_viewlet_swf.html
But my OEM not as same as in this . It don't have job menu and OEM Console Login window and don't have also where I can put username/pwd to login into OMS???
I don't know this problem.
Pls help me.

Hi,
Here are two possible solutions:
1) If you have OEM 9i anywhere in your environment you can use this for scheduling the OWB jobs.
2) If your environment is 10g only you need to install 10g Grid Controll. This product has replaced the OMS / Java console of earlier releases, and contains the same functionality for scheduling jobs.
Note that if you are using the sql_exec_template to execute your mappings you can schedule and run these from any machine on the network, not just the target server.
Hope this helps,
Roald

Can not run OWB Mapping automatically by OEM?

Hi all,
Pls help me.
I am using OWB 10g under Oracle 10g. I want to run OWB Mapping automatically by OEM.
I installed Oracle Database 10g fully but don't have OEM in this. After that, I installed Oracle Client 10g. In this product, there is OEM 10g. I read some topic as "want to run owb mappings thru job schedule" and also read http://otn.oracle.com/products/warehouse/htdocs/oem_scheduling_viewlet_swf.html
But my OEM not as same as in this . It don't have job menu and OEM Console Login window and don't have also where I can put username/pwd to login into OMS???
I don't know this problem.
Pls help me.

Hi,
Here are two possible solutions:
1) If you have OEM 9i anywhere in your environment you can use this for scheduling the OWB jobs.
2) If your environment is 10g only you need to install 10g Grid Controll. This product has replaced the OMS / Java console of earlier releases, and contains the same functionality for scheduling jobs.
Note that if you are using the sql_exec_template to execute your mappings you can schedule and run these from any machine on the network, not just the target server.
Hope this helps,
Roald

Regarding default select clauses executing during OWB Mapping execution -

All-
While observing the statements executing during an OWB(11gR2) Mapping execution,by monitoring the session using SQL Developer
Iam finding the following statements executing multiple times and possibly consuming more of the mapping execution time:-
SELECT MAX(EXECUTION_AUDIT_ID) FROM ALL_RT_AUDIT_MAP_RUNS WHERE MAP_NAME = :B1
SELECT SYS_CONTEXT('owb_workspace' , 'workspaceID' ) FROM DUAL
SELECT nvl2(translate(20040101, 'A1234567890','A'), 'F', 'T') FROM DUAL
SELECT USER FROM SYS.DUAL
These statements have no relation to be business logic being implemented.And seem to be generated by OWB default settings.
Can anyone please let me know how to reduce the frequencey of the above mentioned statements or if possible remove them from the OWB mapping execution.
So that the mapping would run more faster

Hi,
these statement are required to set the runtime audit data. Usually, they do not really impact the performance of a mapping so there is not need to bother about them.
What causes performance problems is usually the business logic part of the mappings.
You may purge old runtime metadata manually. Look at the script
%ORACLE_HOME%\owb\rtp\jrtaudit\owbsys\purge_audit_tables.sqlDocumentation is included.
Regards,
Carsten.

How to Execute a OWB Mapping or a Process from SQLPLUS editor?

I need to know how can we execute a OWB mapping from SQLPLUS editor or from a Stored Procedure.

Hi,
You can use the MDL export/import utility for this, but as you are importing into the same repository you will end up with importing into the same project again.
So for this you can follow the workaround as:
->Take export of the required mapping from the project OWB_B
-> Rename the Project OWB_B to some thing like OWB_B_1(or any other name), note that you have to rename both logical and physical name of the project
-> Rename the project OWB_A to OWB_B and if you import the MDL all the objects will be imported to OWB_B then you can rename back the project to OWB_A
-> Finally rename the project OWB_B_1 to OWB_B (to its original name).
Regards,
Pnreddy

Flat File as Source in OWB Mapping.

Hi All,
Configuration Details is as follows:
Oracle 9i Warehouse Builder Client: 9.2.0.2.8
Oracle 9i Warehouse Builder Repository: 9.2.0.2.0
Windows XP Professional
I developed a mapping which involves a flat file as source & Oracle Table as target steps followed were as follows.
1. Created Flat File module, selected Connector & Location Details.
2. Done mapping for source file & target table.
3. Validated & Generated the mappings.
4. Deployed the mapping in Deployment Manager.
5. Following was Error Message after execution of the mapping.
Completion Status: Completed with errors.
Meesage Log: Starting Execution of VHM_MAP2. Starting Task VHM_MAP2. RPE-01013:SQL Loader reported error condition,number 4. Completing Task VHM_MAP2.
Following was Control File generated by the above mapping.
OPTIONS ( ERRORS=50, BINDSIZE=50000, ROWS=200, READSIZE=65536)
LOAD DATA
CHARACTERSET WE8MSWIN1252
INFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.txt'
BADFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.bad'
DISCARDFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.discard'
INTO TABLE "{{TARGET_LOCATION.Schema}}"."DEPT"
APPEND
REENABLE DISABLED_CONSTRAINTS
FIELDS
TERMINATED BY ','
OPTIONALLY ENCLOSED BY '"'
"DEPTNO" POSITION (1) INTEGER EXTERNAL ,
"DNAME" CHAR ,
"LOC" CHAR
Please note that no message is displayed in Row Activity & output parameters in Deployment Manager.
I worked on lower version of the OWB & in that version there was no concept of Location, Connector, Deployment Manager.
Not sure why the above mapping is failing?
Also I would like to know where can I get more information about the mapping errors which are different from oracle error messages.
e.g. In above case error message is RPE-01013: SQL Loader reported error condition, number 4 .
Thanks in Advance.
Regards,
Vidyanand

Hi
I'm using single host implementation OWB10g/Oracle on same host.
My flat file location is
c:\source\dept.txt
Pl tell me if I have to save the same file on any particular location for OWB to read.
Implementation in OWB10g
1. Created Flat File module, selected Connector & Location Details.
2. Done mapping for source file & target table.
3. Validated & Generated the mappings.
4. Deployed the mapping in Deployment Manager.
5. Following was Error Message after execution of the mapping.
Can not read data from file
c:\souredept.txt
OPTIONS ( ERRORS=50, BINDSIZE=50000, ROWS=200, READSIZE=65536)
LOAD DATA
CHARACTERSET WE8MSWIN1252
INFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.txt'
BADFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.bad'
DISCARDFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.discard'
INTO TABLE "{{TARGET_LOCATION.Schema}}"."DEPT"
APPEND
REENABLE DISABLED_CONSTRAINTS
FIELDS
TERMINATED BY ','
OPTIONALLY ENCLOSED BY '"'
"DEPTNO" POSITION (1) INTEGER EXTERNAL ,
"DNAME" CHAR ,
"LOC" CHAR
Thx in advance

Sequence Generator problem in OWB Mapping

Hi,
I am using a Sequence Generator in my Dimension mapping. And OWB implements the mapping via an Oracle MERGE statement.
However when I execute the mapping my sequence number value gets incremented even when there are only updates and no inserts taking place during the execution.
I am using the sequence number only for inserts and not for updates in the mapping.
Is there a way to avoid this situation or a work around to this problem? This is very urgent and any help in this area would be greatly appreciated.
Thanks

Hi
I also have the same problem as I loose the seq numbers when there are updates only and I do not want to loose thousands of seq numbers. I tried with bulk size =1 as well as row based only execution but no result.
The thing which solved this problem is to have outer join with source and target, then use splitter to find out new and updated records (by looking the join key as null on target table side), then use a fuction to generate seq number when the key is not null. But doing all this does not seem to be elegant performance point of you. I do not want to join source and target due to performance issues.
Could you pl clrify your apprach. Are you using , Source minus target and Source Intersect Target . What you will do if there is no one to one matching between source and the target.
Thanks

How to implement SCD type 2 in OWB 11g

Hi all,
I would like to know that how to implement SCD type 2 in OWB 11g.
Actually I have tried to implement it but the target table which contains the effective_date and expiration_date are null after running the mapping.
I have set the effective date and expiration date settings in the SCD tab of dimension object.
Kindly help me the same if anyone knows.
Kind regards,
shikha

You were able to get OWB11g to move data?
Are you running on a 64-bit windows server? I could not get it to do a basic data move on this type of server install.

Facing problem in implementing the analytical query in OWB

Hi All,
I was trying analytical function for my Customer Dimension but am not able to implement the same in my OWB.I have 2 tables who have duplicates customers which cannot be figured out by Customer id as customer id is not unique.So, i have to filter out the information on the basis of First Name, middle name, last name & DOB. Since, each customer has multiple address records( for Permanent, Correspondence, Unknown ).
I want 1 record for all the three address types.
Can i do thru the following query???
If yes, how will i implment the same in OWB.
SELECT PRENOM, MIDDLE_NAME, NOM, DEBUT, SEXE, OCCUPATION, FAMILY_STATUS,
     EDUC_QUALIFICATION, CUSTOMER_NATIONALITY, SIGLE, ANNUAL_INCOME,
     FATHER_HUSBAND_NAME,TYPE_ADDRESS, ADDRESS1, ADDRESS2, ADDRESS3,
     TOWN, REGION, POSTCODE,ADDRESS_EFFECT_DATE
FROM
(SELECT C1.PRENOM, C1.MIDDLE_NAME, C1.NOM, C1.DEBUT, C1.SEXE, C1.OCCUPATION, C1.FAMILY_STATUS,
     C1.EDUC_QUALIFICATION, C1.CUSTOMER_NATIONALITY, C1.SIGLE, C1.ANNUAL_INCOME,
     C1.FATHER_HUSBAND_NAME,C1.TYPE_ADDRESS, C1.ADDRESS1, C1.ADDRESS2, C1.ADDRESS3,
     C1.TOWN, C1.REGION, C1.POSTCODE,C1.ADDRESS_EFFECT_DATE,
ROW_NUMBER() OVER (PARTITION BY C1.PRENOM, C1.MIDDLE_NAME, C1.NOM, C1.DEBUT,C1.TYPE_ADDRESS
ORDER BY C1.ADDRESS_EFFECT_DATE DESC)M
FROM CUST_1 C1
UNION ALL
SELECT C1.PR_FIRST_NM, C1.PR_MIDDLE_NM, C1.PR_LAST_NM, C1.PR_DOB, C1.PR_GENDER, C1.PR_OCCUPATION, C1.PR_MARITAL_STATUS,
C1.PR_EDUCATION_QUAL, C1.PR_NATIONALITY, C1.PR_TITLE, C1.GP_ANNUAL_INC, C1.PR_FATHER_NM,
C1.AD_TYPE, C1.AD_ADDR1, C1.AD_ADDR2, C1.AD_ADDR3, C1.TOWN, C1.REGION, C1.AD_PIN_CD,C1.REC_UPDT_DT,
ROW_NUMBER() OVER (PARTITION BY C1.PR_FIRST_NM, C1.PR_MIDDLE_NM, C1.PR_LAST_NM, C1.PR_DOB,C1.AD_TYPE
ORDER BY C1.REC_UPDT_DT DESC )M
FROM CUST_2 C1)
WHERE M = 1
Please help me out as right now, am using aggregators which are taking lot of time. Loading type on my Customer Dimension table is- Insert/Update
Thanks in advance
-Nikita.

Hello Nikita,
From your first post I understand that you would like to merge 3 similar (but not complete identical) records into 1 record. If this is the case, then have you thought about using the match-merge operator in OWB?
With the match-merge operator you can tell the mapping which records are similar by selecting "first_nm", "middle_nm", "last_nm" in the Match-Bin of the operator.
Then you define how attributes should be merged.
This way you do not need to aggregate your source data set. Just select all records from both source tables. Put those in the Set-Operator "UNION ALL" and this will be you input for the match-merge operator.
Regards,
Ilona

Rows to columns in owb mapping

Hi,
I have a transformation operator in my OWB mapping where in a sequence value is generated. The sequence value is populated into two target tables.
Now my code populates the below value 10 to two target tables which was generted by my transformation operator .
KEY     VALUE
1     10
Now my requirement changed in such a way that based the key i need to generate multiple values
i.e the output from transformation operator is
Key     Value1     Value2
2     10     11
This should be populated in my target tables as
Key     Value
2     10
2     11
Please explain me how can I implement in my owb mapping.
Many thanks in advance,
Yeswanth

Key is 1 and value that was generated by sequence is 10.
in my target table both the key and the value 10 are loading now.
After the change my target table should have
1 10
1 11
The 10 and 11 are generated from the transformation operator.
Note: Key here is not primary key nor unique.

(264361962) Q XMLM-26 Is it possible to insert some logic in XML maps?

Q<XMLM-26> Is it possible to insert some logic in XML maps?
A<XMLM-26> Since you have the flexibility to defined the map yourself then yes, you
certainly can provide some logic. For more complex situations Workshop also provides
you with the flexibility to use an extended version of ECMAScript (formerly JavaScript)
to perform XML mappings. You can find out more at e-docs:
http://edocs.bea.com/workshop/docs70/help/guide/howdoi/howUseECMAScriptJavaScripttoProcessXMLMessages.html
Adam

Yes, you can make any kind of logic in LV. Some would say even illogic. To implement a latch or any other logic with memory you can use a while loop with a shift register. If the shift register is uninitialized (nothing wired to the left terrminal from outside the loop), it will retain the previous value. You can use case statements to control when various pieces of the logic execute. It would not be difficult to construct a flip-flop which could be type D or JK or T depending upon the value of and input selector.
Lynn

Logical to Physical Mapping

Newbie to the Analytical Workspace Manager v. 11.1.0.7.0 and using Oracle Database 11g Enterprise Edition Release 11.1.0.6.0. Installed the global sample schema and associated objects. Created the workspace in AWM and I am able to see all cubes and dimesnion objects. I am now trying to do the logical to physical mapping of the dimension objects with the tables that I imported into the global schema. I right-click on the Channel dimension, but I do not see the Mapping option. I am unable to launch the mapping canvas. All I see is Maintain, Analyse, Set Security, Save, View Data and Delete. Am I missing something in the installation?
Thanks in advance for your help.
-ST

I also found that when I try to expand the "+" next to the Channel dimension, I get the following java error in the console.
Exception in thread "ExpansionThread" java.lang.NoClassDefFoundError: oracle/security/xs/XSPrincipalException
at oracle.olap.awm.navigator.node.olapi.UDimensionNode.getChildren(Unknown Source)
at oracle.olap.awm.navigator.node.BaseNodeModel.refreshData(Unknown Source)
at oracle.olap.awm.navigator.node.BaseNodeModel.dTreeItemExpanding(Unknown Source)
at oracle.bali.ewt.dTree.DTreeDeferredParent.__fireExpansionChanging(Unknown Source)
at oracle.bali.ewt.dTree.DTreeDeferredParent.setExpanded(Unknown Source)
at oracle.olap.awm.navigator.node.BaseNode.expandHelper(Unknown Source)
at oracle.olap.awm.navigator.node.BaseNode.access$400(Unknown Source)
at oracle.olap.awm.navigator.node.BaseNode$ExpansionThread.run(Unknown Source)
I am unable to view the defined hierarchies
Thanks.

Problem in OWB map for source change capture

The problem is as follows:-
Our OWB map between two different databases, captures change in data at source and populates them in target. It is a one to one map. The map is failing to process some rows from source database though it gives no:of errors as 0 in the audit view thus we infer that the map is running successfully.
In our case, we have a composite key ( Instance_id, Version_number) at source as well as target. One instance_id can has more than one version number. We have observed that the view is picking up all the version_number for a particular instance_id but the map is unable to populate the last version_number to the target table.
But when this map was executed in another environment and it is successfully populating all the data in the target.
The brief description of the map is as follows:-
The map has a view which captures all the changes in data (insert and update) .From this view we filter the rows which were already processed in previous map run (with help of watermark). Then we sort the rows based on DML type and watermark . These rows are then mapped to a target table. The loading type of the map is INSERT/UPDATE.

Hi Nagesh,
When we are doing I18N for that Application. Go to Navigator Tab
Here Select Particular Projects--à src-àPackages-àsap-àvijay
To internationalize the Web Dynpro application, copy the automatically generated *.xlf files and save them under a new name in the same directory.
The new name must meet the following convention:
u2022 .xlf
For example, if you are creating *.xlf files for German,
Use the language key de.
Here Click on OK
After that we can edit and translate these new *.xlf files in the S2X Editor.
ApplyTemFirstView.wdview_de.xlf-àClick on Resource Text Tab
Select Particular Text and Change the language to German-àClick on EDIT Button
Here Enter German Lang-àClick on OK
Now Go to Web Dynpro Explorer Tab
Select Project-àRC Click on Rebuild Project
Select Project-àRC Click on Reload
Then Deploye the Application
How to Check in Explorer. It is converting to German Language or not
Open Internet Explorer
Tool-àInternet Options -àClick on Languages Button-àClick on ADD Button
Select German Language--àClick on OK
Now We will Check in Portal
Created Web Dynpro iView in Portal. That iView assign to the particular WorkSet-àAssign to Role
Select that user Can Change Language
Regards
Vijay Kalluri

Implement NOT IN logic in OWB mapping

Similar Messages

Maybe you are looking for