Implementa​tion of synchroniz​ation steps without using batch or parallel sequences

We are using a custom built process model based upon the sequential process model. 
Do I need to invoke the Synchronization manager in order to use the synchronization steps when not using the batch or parallel process models?
Solved!
Go to Solution.

All synchronization steps and operations (Locks, Rendezvous, Notifications, Queues, etc)  will work in any model or without  a model, except for Batch synchronization.
If you need Batch synchronization, your model needs to use the Synchronization>>Advanced>>Batch Specification step type to specify which threads are in the batch. Since you aren't starting from the Batch model, I doubt you need to worry about that.

Similar Messages

  • Lsmw  step by step procedure using   batch input method

    hi,
    lsmw  step by step procedure using   batch input method

    Step-by-Step Guide for using BAPI in LSMW
    Note! The screen prints in this article are from ECC 5.0. They may differ slightly in other versions.
    Introduction:
    This document details the usage of BAPI in LSMW. We have used the example of migration of the purchase order data into SAP.
    Pre-requisites:
    It is assumed that the reader of this article has the minimum knowledge required on the Business Object, BAPI, Message Types and IDoc Types.
    Step-by-Step Procedure:
    Details of the BAPI used in this scenario:
    Business Object: BUS2012
    Method: CreateFromData
    Details of Message Type and Basic IDoc Type:
    Message Type: PORDCR
    Basic IDoc Type: PORDCR02
    Let’s have a look at the BAPI first, before proceeding to the LSMW:
    1. Go to Transaction BAPI
    2. Click on Search Button
    3. Enter the value “BUS2012” and select “Obj.type(Technical Object Name”
    4. Press ENTER
    5. Following screen appears:
    6. On the left side of the screen, Expand the “PurchaseOrder”.
    7. Select “PurchaseOrder” and double-click on the same for details.
    Building LSMW using BAPI:
    1. Go to Transaction LSMW.
    2. Enter the Project, Subproject and Object information and click on CREATE.
    3. Enter the descriptions for Project, Subproject and Object.
    4. Now select Settings à IDoc Inbound Processing
    5. “IDoc Inbound Processing” screen appears. Enter the required details as shown below:
    6. Click on “Activate IDoc Inbound Processing”.
    7. Click on “Yes” when prompted for “Activate IDoc Inbound?”
    8. Hit on “Back” to return to the main screen.
    9. Click on Continue (F8). Following Screen appears:
    10. Select the Step 1 “Maintain Object Attributes” and select “Execute”.
    11. Select the radio button “Business Object Method” and enter the following details:
    Business Object: BUS2012
    Method: CreateFromData
    Hit ENTER
    12. Save and click on BACK button. Following information message is displayed.
    13. Now select step 2 “Maintain Source Structures” and click “Execute”.
    14. In this step, we need to maintain the source structure. In our example, lets consider the example of a file with 2 structures Head and Item data as shown below:
    Click on Create and name the source structure as HEADERDATA. Now select HEADERDATA and click on “Create” again to create the child structure. Following popup appears:
    Select “Lower Level” and click on Continue. Enter the Item data structure name.
    Click Save and hit BACK button to go to the main screen.
    15. Select step 3 “Maintain Source Fields” and hit execute.
    16. Enter the fields as shown below:
    17. Click SAVE and return to main screen.
    18. Select step 4 “Maintain Structure Relations” and click Execute.
    Select E1PORDCR and click on CREATE RelationShip. Following screen appears:
    Select HEADERDATA and hit ENTER
    Similarly do the same for the structure E1BPEKKOA, E1BPEKPOC and E1BPPEKET.
    Click Save and return to main screen.
    19. Select the step “Maintain Field Mapping and Conversion Rules” and click on execute. Maintain the Field Mapping as seen below:
    20. Select step 7 “Maintain Source Files” and provide the link for the test file created. (Create a test file with the same structure as defined earlier).
    Save and return to main screen.
    21. Select the step “Assign Files” and click on Execute.
    Assign the file provided to the source structure. Here the same file is provided for both the structures.
    Save and return to the main screen.
    22. Select the step “Read Data” and click on Execute.
    Click on Execute.
    Return to the main screen.
    23. Select the step “Display read data” and click on execute.
    Click on the structure name to get the field level values.
    24. Return to main screen and now select “Convert Data”.
    25. Return to the main screen and select “Display Converted data”.
    26. Return to main screen and select “Start IDoc generation”.
    27. Now select the step “Start IDoc Processing” on the main screen.
    28. Return to main screen and click on “Create IDoc overview”. Here the data record and status records of the IDoc could be viewed
    It is given in screen shot.
    http://www.****************
    http://www.sapbrainsonline.com/TUTORIALS/TECHNICAL/LSMW_tutorial.html
    http://www.sapbrain.com/TOOLS/LSMW/SAP_LSMW_steps_introduction.html
    http://esnips.com/doc/8e732760-5548-44cc-a0bb-5982c9424f17/lsmw_sp.ppt
    http://esnips.com/doc/f55fef40-fb82-4e89-9000-88316699c323/Data-Transfer-Using-LSMW.zip
    http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
    http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
    http://esnips.com/doc/7582d072-6663-4388-803b-4b2b94d7f85e/LSMW.pdf
    Reward points if useful.

  • How to Implement SSL with Oracle Applications R12 without using Load Balanc

    How to Implement SSL with Oracle Applications R12.1.3 without using Load Balancer

    Please refer to (Enabling SSL in Release 12 [ID 376700.1]).
    Thanks,
    Hussein

  • How to implement Master-Detail Search in TopLink without using DataControl

    Hi,
    I am using TopLink and EJB in our requirement. But we are not creating any data controls. Without data controls how to implement master detail search using TopLink and EJB. I did search for a single table. It is working fine. The way i implented is as follows.
    1) Taking search parameter from UI and passing it to A delegator class's method.
    2) Delegator class's method calls the EJB's NamedQuery which i already created using expression builder.
    3) EJB executes the NamedQuery with the parameter we are passing. And it returns the results back to UI.
    But as i am new to TopLink, can anyone tell me the procedure to implement Master - Detail search. Here we need to search based on Master table's column.
    Waiting for the replies regarding this.
    Thanks & Regards,
    Suresh Kethireddy

    Hi,
    I did it successfully. Following is the code.
    Session session = getSessionFactory().acquireSession();
    UnitOfWork uow = session.acquireUnitOfWork();
    ReadAllQuery raq = new ReadAllQuery();
    Dept d = new Dept();
    d.setLoc(loc);
    raq.setExampleObject(d);
    List<Dept> res=(List<Dept>)uow.executeQuery(raq);
    for(int i=0; i<res.size();i++){
    System.out.println("Dept DeptNo ---"+res.get(i).getDeptno());
    System.out.println("Dept DeptName ---"+res.get(i).getDname());
    System.out.println("Dept Location ---"+res.get(i).getLoc());
    List<Emp> eRes=res.get(i).getEmpCollection();
    for(int j=0; j<eRes.size();j++){
    System.out.println(" Emp No ---"+eRes.get(j).getEmpno());
    System.out.println(" Emp Name ---"+eRes.get(j).getEname());
    System.out.println("Emp HireDate ---"+eRes.get(j).getHiredate());
    System.out.println(" Emp Job ---"+eRes.get(j).getJob());
    System.out.println(" Emp Mgr ---"+eRes.get(j).getMgr());
    System.out.println(" Emp Sal ---"+eRes.get(j).getSal());
    But now my question is, i want to search by providing Dept param as well Emp(Which is child table) param also. Is it possible?
    I tried in 2 ways like this.
    1) Emp emp = new Emp();
    emp.setEname(eName);
    dept.addEmp(emp);
    raq.setExampleObject(dept);
    2) Emp e = new Emp();
    e.setEname("ADAMS");
    List<Emp> list = new ArrayList();
    list.add(e);
    d.setEmpCollection(list);
    raq.setExampleObject(d);
    But in both cases i failed to search based on the values i am passing to Emp.
    Is there any other way to achieve my requirement?
    Any help on this is great.
    Thanks & Regards,
    Suresh K

  • How can I run Worldspan on a mac without using VMware or Parallels?

    Does anyone know how I can run Worldspan (http://go.worldspan.com) Airline Reservation program on a Mac? Its a web based system, so I am not sure why I cant do this.
    They have released an app for Iphone, Ipad. But nothing for Mac. (https://itunes.apple.com/gb/app/travelport-mobile-agent/id447792568?mt=8)
    I currently use VMware, but dont like it.
    Please help!

    You have a very serious problem and you need to fix it now. And by now I mean it's the very next thing you do on your computer.
    OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
    Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
    Your first priority is to make more space on that HD. Nothing else can be done until you do.
    Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.

  • Document Storage in Sharepoint without using EP

    Hi,
    We are implementing SAP Solution Manager 4.0 without using EP. It uses CRM 5.0.
    The issue We are facing is that the Content Management system of CRM 5.0 uses the SAP databases for storage of documents. Obviously, this can be expected to be a heavy drag on the DB performance.
    We want to instead use an alternate means to store CM Documents. For example, use a File-server area on the application server or use MS Sharepoint portal 2003 for the purpose. Any pointers on how to achieve this?
    -Regards,
    Pradeep

    Hi Pradeep,
       Look at <a href="http://help.sap.com/saphelp_crm50/helpdata/en/e3/923227b24e11d5993800508b6b8b11/frameset.htm">External Repositories</a> maybe it helps you
    Regards.
    Manuel

  • I run Final Cut Express 4.0.1; I shoot with a Sony HDR-CX260V. How do I import from the camera directly to Final Cut, without having to go through the intermediate step of using iMovie?

    I use Final Cut Express 4.0.1; I shoot with a Sony HDR-CX260V.
    How do I import from camera to Final Cut without going through the intermediate step of using iMovie?

    If you shoot in one of the following modes you should be able to Log & Transfer directly into FCE:
    HD:  1920x1080/60i (FX or FH mode)
    HD:  1440x1080/60i (HQ or LP mode)
    SD:  720x480/60i
    1080/60p (PS mode) seems to be the default mode in your camcorder.  FCE only supports progressive video in 720p50 or 720p60.   That's probably why you have had to import via iMovie.
    It would be better to upgrade to Final Cut Pro X, the version currently supported.  FCE was discontinued over 18 months ago and is not supported on Lion or Mountain Lion.

  • Single step workflow with multiple approvers (without using a group)

    Hi,
    is it possible to have a single step workflow with multiple approvers without using a group? This is for a contract document.
    i want to add a number of users based on particular logic. The approvers are random and do not belong to any particular group.
    DO let me know if it is possible or if any of you have done that.
    thanks in advance.
    regards,
    rubio

    Hi Rubio,
    I believe the behavior would be, if individual users are added as approvers then the system would require each approver to approve the document. However, if you use the user group, you could set the role so that it would be either ALL or ANY.
    Regards,
    Vikram

  • Steps to Upgrade PT8.49 to 8.50 Manually without using an Upgrade Template

    Folks,
    Hello. I am Upgrading PeopleTools 8.49 to 8.50 Manually without using an Upgrade Template because I cannot download an Upgrade Template from Oracle.
    Upgrading is actually add/drop some tables/views in PeopleTools 8.49 Database using Chang Assistant 8.50.
    According to the document "Enterprise PeopleTools 8.50 Upgrade" Chapter 3 and Chapter 4, after configure Change Assistant 8.50 and EMF, we need to creat an Upgrade job and run some scripts.
    I have configured Change Assistant 8.50 and EMF. EMF run successfully. After that, I don't know the exact steps to do in Change Assistant.
    Can any folks tell me the steps to upgrade PT8.49 to 8.50 manually in Chang Assistant without using an Upgrade Template after configure Change Assistant and EMF ?
    Thanks.

    Do you know what is Change Assistant ? It is running job defined from template and indicate when step has to be done manually. But Change Assistant itself is nothing but an assistant, it does not build record, it does not run DMS, it does not run sql script, for all those Change Assistant is calling corresponding tools (AppDesigner, DataMover, SQL*Plus). Consequently, if you don't have template, you should do yourself every single step usually ran by the PsCA, but you won't need PsCA itself, just run manually whatever indicated in the doc (basically replace "PsCA" by "manually").
    As I already told you earlier, it is tedious, but works fine if you pay attention enough.
    HTH,
    Nicolas.

  • ESS implementation without using EP

    Hi,
    I want to implement ESS without using EP. Please give me the various ways to implement this. & suggest the most feasible solution. or any links related to this.
    Regards,
    Seema

    Hi Seema,
    <b> Welcome to SDN family </b>
    Evn if u use EP , ESS runs on the ITS Only .
    There are Service files ( Internet Application Compenents ) called as IAC's .
    Go to sm30 - > t77www_srv iview to see the transactions.
    Hope it helps .
    Rgds,
    J
    If ur problem solved ,Award pts and close the thread.

  • FFT implementation without using inbuilt FFT function provided with labview

    Hi,
    I am very new to labview ,I have to implement FFT on NI Node WSN-3202.No fft inbuilt function on WSN target is there to do so.Please anyone give me some idea to implement FFT without using fft function in labview.
    Thanks

    Hi rita,
    when all you need is "some idea" I would suggest to read the Wikipedia article on FFT...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Solved: ADF BC and primary keys - how to implement without using triggers

    Using the following OBE as an example:
    http://www.oracle.com/technology/obe/obe9051jdev/ADFWorkshop/BuildingADFApplicationsWorkshop.htm
    There is just one view that has CustomerId defined as a primary key, where the value for the primary key comes from the customer_seq sequence.
    How do you create the model using ADF BC entity to create an entity object that has a primary key that needs to be populated by a sequence table when inserted WITHOUT using a trigger?
    Basically I want to just use ADF BC instead of toplink in the OBE. We do not use triggers to insert primary keys, so this example is a good match for what I need.
    Can someone help me out. How do I adjust the model to use just ADF BC - how do I define the entity object to use a sequence. Do I just override the create method in the impl? Is it that simple? Or is there a way to do this point and click in the entity tool.
    Thanks!

    I'm not the dba (or one of several) - so don't shoot the messenger... the dba's do not like to use triggers in the code. I have been told that this has caused too many problems in application development.
    I don't ask why, just deal with the fallout.
    I did try using the following code in a create method:
    protected void create(AttributeList attributeList)
    super.create(attributeList);
    SequenceImpl s = new SequenceImpl("customers_seq", getDBTransaction());
    // this.setCustId(s.getSequenceNumber());
    this.createPrimaryKey(s.getSequenceNumber());
    When I run the test program for the module, I get a new entry with the id empty and greyed out. I was hoping that this would be filled in on the actual insert, but no joy. As soon as I try to commit, I get an error:
    (oracle.jbo.AttrValException) JBO-27014: Attribute CustId in CustomersWSView is required)
    So what needs to be done?
    Message was edited by:
    klee

  • Steps to expose a web service without using SR

    Hello,
    How can I expose a web service without using the service registry?  Is there some documentation for this process?
    Thanks,
    Matt

    Thanks for the response.  Although, I do not have an * in the Sender Agreement.
    Here is the situation:
    When I attempt to reach the URL for my Web Service but using NWA instead of the Service Call I get into NWA.
    https://xxxxx.steelcasedev.com/nwa
    Result: Success
    When I use SOAPSonar to run this URL I get the CPA error:
    https://xxxxx.steelcasedev.com//XISOAPAdapter/MessageServlet?senderParty=&senderService=WSProcurement_Async_Sender&receiverParty=&receiverService=Steelcase_Dev&interface=WSProcure_Out&interfaceNamespace=urn:steelcasedev.com:wsprocure:xsuppliers
    Result:  Error
    <context>XIAdapter</context>
              <code>ADAPTER.JAVA_EXCEPTION</code>
              <text><![CDATA[
    com.sap.aii.af.service.cpa.CPAException: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=WSProcurement_Async_Sender;TS=Steelcase_SAPR3_D01;AN=WSProcurement_Out;ANS=urn:steelcase.com:wsprocurement:xml2suppliers;
         at com.sap.aii.af.service.cpa.impl.lookup.CommonLookup.checkForError(CommonLookup.java:53)
         at com.sap.aii.af.service.cpa.InboundRuntimeLookup.getBinding(InboundRuntimeLookup.java:411)
         at com.sap.aii.af.service.cpa.impl.lookup.AbstractLookupManager.getBinding(AbstractLookupManager.java:714)
         at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:430)
    The sender adapter is active in ID but in RTWB it is "Started but Inactive".  I have found that this status could be related to the fact that I have not had a successful transaction for that channel yet.
    My NW Admin says he found this error: 
    Marked transaction for rollback for message 0015605e-09d7-1ddf-94f7-d5031c019713(INBOUND). Reason: Channel has been configured as inactive and cannot accept messages
    I am quite confused. 
    Thanks,
    Matt

  • Follow up task without using the action profile

    Hi,
    Is it possible to create the follow up task without using the action profile? If so, please let me know how we can do that?
    as per the requirements, i have to the custom coding that will automatically create follow-on task triggered by status change on the all the transaction type. Please guide me how can we do that.
    Task details (task id, description), I'm reading it from the custom table.
    Thanks for your help.
    Regards,
    Vaibhav

    Thanks Naresh for the response.
    Not sure if I can use the CRMV_EVENT. Even I'm not aware how to use that. Let me tell what i am doing in the logic.
    - implementing the logic in the badi order_save (method - CHECK_BEFORE_SAVE)
    - get the header and item details using the FM CRM_ORDER_READ.
    - get the status of header / item from the output of CRM_ORDER_READ.
    - compare the status with the custom table (having info of hearder type, item type, status, tast id, task description etc)
    - if status is different, create the task using the details from the custom table.
    now i want to write the logic to implement the last step. Do we have any standard FM where I can pass the task ID and it will create the task? Please help.

  • Use HCM processes and Forms without using the Enterprise Portal

    is it possible to leverage existing HR Admin Services (HCM processes and Forms) functionality without using the Enterprise Portal?
    1) Create an Adobe form and Interface using SFP
    2) Set up ISR and Form Scenario
    3) Set up Forms configuration to use existing Backend and generic Services
    4) Set up workflow to updated Backend using Services
    is it possible to do the above steps and not use the Portal? If Yes, how do we present the forms to the Manager, and provide different buttons that appears on the Portal by default?
    Any ideas will be greatly appreciated.
    Thanks,
    Saurabh

    Hi Saurabh,
    your assumptions and findings (items can not be started from the backend workflow inbox etc.) are correct: These processes can not be started without the Portal and it is not intended to do this.
    The above mentioned backend report are only forseen for implementation and testing purposes and not for productive use.
    In addition to the fact, that you already can't execute the work items a lot of other features of the framework (Process Browser etc.) are only available through the Portal.
    Best Regards
    Michael Bonrat - Solution Manager HCM Processes and Forms
    Info about HCM Processes and Forms:
    www.service.sap.com/erp: 
    - SAP ERP Human Capital Management -> Workforce Process Management -> HCM Processes and Forms

Maybe you are looking for

  • File not found after restart

    Hello, We have a web application that reads in a .ini file. This works great. But, when we have to restart tomcat (for example after the database has been restarted) sometimes tomcat throws a file not found exception for that file. The only way to ge

  • IMac monitor - desktop items disappear/reappear - applications pause

    For about a week now, every 2 minutes all of my desktop icons will disappear and then reappear. If I have a folder open, such as the Pictures folder, it will close during this process. If I am using Firefox or Safari or Photoshop, when the desktop it

  • AS3 and XML, HELP!

    Hi I have no idea where to post this, so pls forgive me if im in the wrong place, but I have an Assessment due tomorrow, I'm only 4 weeks knew to AS3 and Flash, and confused as, so pls forgive me if i also look silly asking this question. The issue i

  • OIM entity adapters vs event handlers

    Hi everyone What is the difference between running code in a pre-insert entity adapters and pre-insert event handler? I have an adapter that generates and emails random user password but it has some undesirable actions such as running multiple times

  • Object Count in File

    Hi Everyone, I need to read and write Employee objects from a data structure to a file. When I read these objects back in, is there any way to get a count of the number of objects in the file? I don't want readObject to throw an exception if there ar