I run Final Cut Express 4.0.1; I shoot with a Sony HDR-CX260V. How do I import from the camera directly to Final Cut, without having to go through the intermediate step of using iMovie?

I use Final Cut Express 4.0.1; I shoot with a Sony HDR-CX260V.
How do I import from camera to Final Cut without going through the intermediate step of using iMovie?

If you shoot in one of the following modes you should be able to Log & Transfer directly into FCE:
HD: 1920x1080/60i (FX or FH mode)
HD: 1440x1080/60i (HQ or LP mode)
SD: 720x480/60i
1080/60p (PS mode) seems to be the default mode in your camcorder. FCE only supports progressive video in 720p50 or 720p60. That's probably why you have had to import via iMovie.
It would be better to upgrade to Final Cut Pro X, the version currently supported. FCE was discontinued over 18 months ago and is not supported on Lion or Mountain Lion.

Similar Messages

I edit movies onMac OS X using Final Cut Express and down load to desk top in .mov format. How do I load finished movie to i pad 2? i tunes will not transfer it.

I edit movies onMac OS X using Final Cut Express and down load to desk top in .mov format. How do I load finished movie to i pad 2? i tunes will not transfer it. Thanks, stevefromnorthfreo

Try outputting it as a MP4 or M4V
If Final Cut won't output it, Mpegstreamclip will convert it. So will Quicktime if you have the pro version.

How do I import from Canon XM2 Final Cut Pro X on a MacBook Pro?

How do I import from a Canon XM2 to MacBook Air using Final Cut Pro X or iMovie 11 please?

This is a miniDV camcorder. For this camcorder you must use Firewire.
If your MBP has Firewire 800, you need a 4 pin to 9 pin firewire cable.
The camera must be plugged into wall power, not batteries only.
Set the camera to Play, and iMovie should recognize the camera and an import screen should appear.

Using IMOVIE '08 to import from DV camera to 'BUSLINK' external hard drive( formatted for MAC ) but no success and kept getting this message: The import was canceled. You may not have permission to write to /Volumes/BUSLINK/iMovie Events.localized. Thanx

Using IMOVIE '08 to import from DV camera to 'BUSLINK' external hard drive( formatted for MAC ) but no success and kept getting this message: The import was canceled. You may not have permission to write to /Volumes/BUSLINK/iMovie Events.localized. Thanx in advance!

I finally got a representative that was able to help me, she had me go to Get Info, by right clicking iMovie from the finder, and I had to click on Sharing & Permissions>Everyone>Read & Write

How do I import a 32gb maxwell Sandisk into Final Cut?

How do I import a 32gb maxwell Sandisk into Final Cut? I insert the sandisk into my MacBook Pro and it doesn't seem to read. The lock is off on the sandisk. I tried Log and Capture and Lag and Transfer. Any help is appreciated.
I have Final Cut Pro 7.0.3 and Mac OS X 10.6.8

Does the card show up in the Finder?
Did you set the path to the card in Log and Transfer...

How do I import or export iLife music into Final Cut Pro 7. Thanks

How do I import or export iLife music into Final Cut Pro 7? Thanks.

Locate the .caf file you want to use in FCP in the Finder. Normally, iLife sound files will be in Macintosh HD/Library/Audio/Apple Loops/Apple/iLife Sound Effects/(subfolder).
Open the file on SoundTrack Pro, the go to File->Save a Copy As. In the Save As window that will open, navigate to where you want to save the file, then near the bottom of that window, use the drop-down File Format menu to choose AIFF. Set the bit depth to 16-Bit Integer and the Sampling Rate to 48000 hz.
Import the resulting AIFF file into your FCP project.
-DH

I want to open a folder in a separate window by clicking on it. For some reason when I click on a folder it just replaces the one I was just in. I want them both to be open at the same time without having to go through several steps.

I want to open a folder in a separate window by clicking on it. For some reason when I click on a folder it just replaces the one I was just in. I want them both to be open at the same time without having to go through several steps. Old apple operating systems made it easy to have several folders open at one time.

Eric, thanks that works but seems like an extra added step also to do it that way. I've got to move and organize a ton of files and I'm looking for a easy way to get this done. I could also open the folder into a separate tab and then drag the tab out so it becomes an open window but thats a lot of fussing around also with extra steps. Not sure why these newer operating system seems more confusing and less user friendly than what they used to. In the past I could just click on any folder and it would open in a separate window making it really easy to copy or move files from one place to the other just by simply dragging them from one window to the other. Seems like I'm going through several extra steps now to do a simple task.

Imovie 10.0.3 won't import from a camera that doesn't have a tape

I am using iMovie 10.0.3 and am trying to import live video from my canon gl2 camcorder without having to use a tape. iMovie will capture just fine but only as long as there is a tape in the camera and the camera is recording. If I play pre-recorded tapes to iMovie it records ok as well. I've been using this camera to my macbook pro (2011) and using iMovie without having a tape in the camera.

You need to convert the VOB files back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
which is free, as well as the the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.

Are there any settings in the options (or anywhere else) that I can use to set up an auto confirm and resend without having to manually click the 'resend' butto

There is a certain website I use that I refresh frequently. Every time I do I get a pop up message labeled ‘Confirm’ with a question mark in it that says;
“To display this page, Firefox must send information that will repeat any action (such as a search or order confirmation) that was performed earlier."
It only seems to be a problem with this one particular site. Are there any settings in the options (or anywhere else) that I can use to set up an auto confirm and resend without having to manually click the ‘resend’ button in the pop up window?

Hi cor-el, Thanks for responding;
I am accustomed to seeing this type of pop up on occasion and understand why they are necessary to prevent duplicating orders, payments, etc. I am not using a back button, I wanted to use an auto-refresh app to search for reservation openings on a certain web site and can not because this pop up requires me to manually push a button every time the page refreshes. I am resending the same information every time (a date range) via the POST form, so, was hoping there was a way to either disable, override, or set up and auto response so I can use the auto-refresh app. Your description of how to avoid the pop up didn't entirely make sense to me, but If I have to do a bunch of manual steps in between each refresh attempt it doesn't matter because I'm no better off.

My student has been using Lightroom 4 with Photoshop CS5 on her Mac for well over a year. Because of the difference between the Camera raw version available to her in Photoshop CS5 and the raw process in Lightroom 4, she has been exporting her raw images

Any ideas?

My student has been using Lightroom 4 with Photoshop CS5 on her Mac for well over a year. Because of the difference between the Camera raw version available to her in Photoshop CS5 and the raw process in Lightroom 4, she has been exporting her raw images from Lightroom and choosing the "Render using Lightroom option when it popped up in the dialogue box. She has been doing this for over a year and a half without any problem. Today when she hit Command E no dialogue box appeared and the image just opened in Photoshop. I'm concerned that all of her Lightroom edits are not being rendered to Photoshop. Anyone have an idea as to how we can get the "Render using Lightroom" dialogue back?

How do I update from MAC OS X 10.6.8 to a later version? The software I'm trying to run indicated I needed MAC OS X 10.7 or later.

How do I update from MAC OS X 10.6.8 to a later version? The software I'm trying to run indicated I needed MAC OS X 10.7 or later.

Open the Mac App Store and try downloading Yosemite. If you get told it's incompatible, choose About this Mac from the Apple menu, check if the computer has at least a Xeon or Core 2 Duo(not Core Duo) CPU and 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(122969)

I use an Apple bluetooth keyboard with my iPad. In messages I can't find a way to "send" a message without tapping on Send on the iPad's screen. I've tried every key and key combo that I can think of. Am I missing something?

I use an Apple bluetooth keyboard with my iPad. In messages I can't find a way to "send" a message without tapping on Send on the iPad's screen. I've tried every key and key combo that I can think of. Am I missing something?

I already have multiple devices and by far I like my iPad the most over laptops and the iPad. That including checking out my friends MacBook Air.
The difference for me is the touch interface on the screen itself for things that do not require a lot of typing. For me, the iPad is more "magical" than anything else I've used.
Again, I do appreciate your answers but you don't know my situation. Not everything is as it is perceived without knowing me and what I have to go through.

How do I import from my Sony Z5, FCPX and iMovie do not recognise the file format?

How do I import from my Sony Z5, FCPX and iMovie do not recognise the file format?

GR-Blitz,
You can see a few ways of doing it in this thread:
https://forums.adobe.com/message/6474423#6474423

HT1665 Can i use lightening to usb camera adaptor on iPhone 5 to transfer photos to my iphone5 from the camera directly?

Can i use lightening to usb camera adaptor on iPhone 5 to transfer photos to my iphone5 from the camera directly?

No. http://store.apple.com/us/question/answers/iphone/will-camera-connection-kit-wor k-with-iphone-4s/QPPFXJ7XHTHFTY2DJ
Transfer them to your iPad and then to the iPhone.
Copy Photos (& Videos) Between iOS Devices
http://tinyurl.com/cnz95bc
 Cheers, Tom

Need help editing and exporting using Final Cut Express - why does video end up with judder?!!

I've imported material from my JVC HD Camera and have edited a 52 minute sequence on Final Cut Express. I've exported it as a Quicktime Movie and it's 43GB. How do I get this on to DVD?
I've tried using iDVD to export but as you can imagine, the quality is not great. There's a judder on it. I have no idea where to start with using applications like MPEG Streamclip to convert the clip so that when it does get on to DVD, it doesn't judder. Can anyone help? This is driving me insane!!

I've exported it as a Quicktime Movie and it's 43GB. How do I get this on to DVD?
First step - just use this export as the import into iDVD. iDVD will take care of the necessary encoding to fit it on a DVD disk. The file size is of no concern; the only concern is the length (in time) of the video ... iDVD can fit about 2 hours of video on single layer DVD media; about 4 hours on dual-layer DVD media.
Regarding the judder, this is not specifically an iDVD issue. Do you see the judder when you play the video in the FCE Canvas window?

I run Final Cut Express 4.0.1; I shoot with a Sony HDR-CX260V. How do I import from the camera directly to Final Cut, without having to go through the intermediate step of using iMovie?

Similar Messages

Maybe you are looking for