Implementing new note - why and how?
hello,
user in PP complains about being unable to execute one transaction. consultant found that there is note / correction which should be implemented and it will correct that error.
why such error suddenly appear? no patches have been applied on server since 01/2006 and suddenly i must apply correction. by now, everything was fine.
where from requirement for that correction - appeared????
another thing: how to apply that correction? should i apply it on customizing client on dev, transport request on qas and then on production? is it way it should be implemented?
is it possible to implement that note/correction just on sendbox (one client on qas)?
check it out and if everything works fine, do it way dev-qas-prd?
as i said, no patches have been applied since 01/2006. is it must to install all patches before applying note/correction?
since we implemented r/3 (10/2005), no one correction appeared that needs to be installed, so that is why i am confused.
thanks!
>why such error suddenly appear? no patches have been applied on server since 01/2006 and suddenly >i must apply correction. by now, everything was fine.
There could be many reason for that error, but you should read the symptom which is appeared in the note and you could verify the symptom from your problem, and it will answer your question.
>where from requirement for that correction - appeared????
It should be come from consultant to the technical team to implement the note.
another thing: how to apply that correction? should i apply it on customizing client on dev, transport request on qas and then on production? is it way it should be implemented?
You should apply the Note in developement system and through transport you can move forward to QA & PRD system.
>is it possible to implement that note/correction just on sendbox (one client on qas)?
>check it out and if everything works fine, do it way dev-qas-prd?
No I would not recomend to go to QA system. First apply in the dev system and check that correction has been made then apply on QA system.
>as i said, no patches have been applied since 01/2006. is it must to install all patches before applying >note/correction?
>since we implemented r/3 (10/2005), no one correction appeared that needs to be installed, so that is >why i am confused.
As i said there could be many reason for that but notes can be applied directly. You need not to apply the whole support pack for a single note. But yes System should be upgraded on all the level otherwise you will get errors from either OS level or Sap Level or Database level. Even you raise a support message to SAP they would probably tell you to update the system first for support
Regards,
Subhash
Similar Messages
-
this has only been a problem with iOS 5.1 and 5.1.1
That seems to be a problem since iOS 5. I know of no good solution. yu can try:
- Unsyncing all music and resyncing
- Restoring from backup -
This is a new notification coming up with iTunes, why and how do I fix it?
The song “Penny Lane” could not be used because the original file could not be found. Would you like to locate it?
MaxHey xxCreepyFiaxx,
First, I would try the following suggested steps for when you don't see content in iTunes after updating:
Quit iTunes.
Download and install the latest version of iTunes.
Use the Finder (Mac) or Windows Explorer (Windows) to go to the iTunes folder that contains the iTunes library files:
Mac OS X
/Users/username/Music/iTunes/
Microsoft Windows Windows XP and Windows 2000
\Documents and Settings\username\My Documents\My Music\iTunes\
Microsoft Windows Windows Vista and Windows 7
\Users\username\Music\iTunes\
Drag the iTunes Library file from the above location to the Desktop.
Open the Previous iTunes Libraries folder in the iTunes folder.
Locate the file named iTunes Library YYYY-MM-DD where YYYY-MM-DD is the date you upgraded iTunes (Year-Month-Day).
Drag this file to the iTunes folder (the enclosing folder).
Rename this file to iTunes Library.
Open iTunes.
You should now see your missing content in iTunes.
via: No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
If that doesn't resolve the issue, then I'd go through the steps in here:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Have a good one,
Delgadoh -
I have up dated my itune and now it will not play my old purchase movies. I have brought new ones and they work but my old purchases will not. Why and how can I fix it.
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created. -
In Contacts, I don't have any duplicates, but in iMessage contacts on iMac in Mountain Lion, the contacts it provides for a new message are all doubles. Why and how can I fix?
I also notice that each contact says iCloud in it twice, but when I go to iCloud.com, there are no duplicates either. Help..mdd770,
Try Contacts>Preferences...>Accounts...remove {-}/re-add {+}your iCloud account.
If that is not successful, follow the steps listed in iCloud: Troubleshooting iCloud Contacts. -
I use iPhone, iPad and MacPro, all works fine but the newly purchased iMac does not receive emails on time - always later than other devices. Why and how to fix?
Go to Mail Preferences
Click on the General tab
Set "Check for New Messages:" to "Every Minute"
Hope this helps -
When plugged my samsung in USB as memory device no new device icon appears at desktop like it used to do in snow leopard. But USB prober recognizes the phone... Why and How?
OK, I think you are trying to connect the printer wirelessly to your wireless router, right?
I think that is the way to go, so let's do that:
1. Restart the router by pulling its power cord momentarily. Let it restart.
2. On the front of the printer go to Setup > Wireless (or Netowrk, not sure) > Wireless Setup Wizard. Run the Wizard to connect your printer to your router.
3. After that, go to Control Panel > Devices & Printers and delete all instances of the printer.
4. Finally re-add the printer with these instructions:
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing. Get its IP from a Network Test printed from the front panel of the printer.
2. Click >> Start >> Control panel >> Devices & Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Hi
I have purchased an audio book from iTunes with my iMac.
Now I wanted to listen to it on my iPhone so I proceeded to transfer the purchase and looked for the book in the purchased section of the store in the iTunes on my iPhone but it did not show up.
Does anyone know why and how I can transfer the audio book purchased on my iPhone so I can listen while away from the desk?
Thank you,
SanyaCan you find the audio book by using the Search feature on the iPod?
Do you have the right boxes checked to sync the audio book to the iPod?
iTunes: Syncing media content to iOS devices and iPod
Note you have to check the boxes in Books pane for the iPod in iTunes to sync books in general and another box to sync Audio Books. -
Recently, when I create a new album (untitled), it immediately fills it immediately fills with picture either from the album above it or, if I have a Faces collection open, with the pictures from that collection. Why and how do I fix it?
When a new album is created it will fill with whatever is in the right hand window, If you're in the Events or Photos mode it will contain all photos in the library. Yes, strange behavior.
OT -
Why and how do I fix this? When I go into cellular data and view account it says my ipad is activated and ready to go. What gives???
It was working fine up until I upgraded the OS which I hadn't done in many versions so the ipad was not working as well as it should. Now it is searching for the network.
.Hello noodles074!
Let's get your device working again! It's possible that your device just needs to be reprovisioned on our network. Please go to Settings>General>Reset>Subscriber Services>Reprovision Account. This may take several minutes. After allowing about 5 minutes for completion, please power your iPad off and back on, and test it again. Let us know if this takes care of it!
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport -
In most of my email attachment the logo ( Mimi attachment ) show and I can not open that attachment , why and how to solve this problem ???
iPad 2, iOS 7When did this start? What was the last thing you changed before problem started?
Have you tried sending the attachment from a different account. Have a friend send you an attachment. Get a gmail account.
Send the email with attachments to two different accounts one to your ipad and the other to a gmail account in a web browser and not on an iPad. See if you can read the ones to the gmail account.
You did reboot your ipad?
Standard stuff for ipad.
http://www.my-iguru.com/ipad/ipad-hints-tips/ipad-viewing-saving-email-attachmen ts.php -
I can't play the downloaded iTunes movie on my newly updated iMac to OS X Maverick. Why not? And How can I get it to work? Thanks.
Do you get any error message?
What actually happens when you open it?
What app are you trying to play the files inside? Try iTunes.
I assume these files have DRM from the iTunes store. The Mac needs to be authorized to play them, open iTunes & select Authorize in the store menu, then sign in with the Apple ID that purchased the files.
Select the iTem in iTunes & get info on it (from the File menu) & you can see the account name that it belongs to. -
My Captivate 8 is not converting my .avi video files to .flv or .f4v, anyone know why and how to fix it?
Hi There,
Can you try to launch Adobe Media Encoder CS6 ( come with Captivate 8) and try to convert .avi video files to .flv/ .f4v format.
Let me know if it helps.
Regards,
Ajit -
On my IPad 2 home screen, the mail app used to indicate the number of new messages with a number in a red circle, next to the app. This has vanished, I think about the same time as when I upgraded to the new OS. Does anyone know why and how to restore this feature?
Thanks. While you were replying to my question, I went into notifications and figured
it out. Appreciate the quick response! -
I've recently downloaded Lion and find my Microsoft excel, word, entourage and powerpoint do not function. It says these functions are not now supported. Why and how do I get to use them again?
philippnoe wrote:
What a "great" Program which is supporting many nice but not mandatory things but is not supporting a Program which is used day by day from many users ... and especially this Program is also sold officially by apple !!!
Yeah!, Why, Lion won't even run my old DOS programs!
Maybe you are looking for
-
I can't open itunes! is there a solution?
When I tried opening itunes, the hourglass would appear for a few seconds then disappear, same with the itunes.exe in the task manager. There is no error message when I try to open itunes. My Quicktime opens, no problems. I've tried repairing, un-ins
-
My channel guide does not come up.....only "No Program Name"....anyone know what I can do? I've already reset the STB.
-
Hi there, When I boot my PC, grub shows a line which says "Error: /boot/grub..." but it goes away way too fast for me to read. After reading wiki and forums, I supposed it's something related to locales, and I copied en.mo into /boot/grub/locale. The
-
FCP + Quicktime crashing - Foundation.framework missing from system?
Ive been having lots of trouble with programs such as FCP HD since updating the program to 5.1 and the system to 10.4.8. The constantly crash and I get the same recurring error messages: Link (dyld) error: image not found /System/Library/Frameworks/F
-
The installed file can not be activated. Since the system does not perform the registration. What can I do?