Implicit conversion working then not working (ORA-017222)

I have a table like following:
One of the SQL of my application does the following:
SELECT C1 FROM MyTable WHERE C1 =

Hi,
What happened to the Query..
SELECT C1 FROM MyTable WHERE C1 =
You are checking the improper data types... in your Where Clause...that is the Issue.. User Appropiate Convesion Fucntions Like to_char, to_number... to work.. properly.. !!
- Pavan Kumar N

Similar Messages

Compaq 610 Keyboard working then not working and so in circle

Greetings to all good members of this forum .
will, one strange thing, when i turn on my laptop all keys will work perfect, then after 3...5 minutes only navigation keys will work. in that case i would restart the laptop, so again it will work. But also it happens even if i restart him it will not work till next restart :s
wondering is it up to keyboard or something with my motherboard. ot I doubt that is up to software problem? Hope there will be some solutio for this, thanks.
This question was solved.
View Solution.

Hello saledigitalac,
What is your product number and operating system?
Thanks!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Keyboard not working, then working, then not working again...

I am trying to post this quickly because my keyboard will probably stop working soon... My keyboard keeps provoking no response whatsoever. When this happens all my keys, including the volume controls etc. just stop working. Then, soon after, they start working again... I will try to take it to a service center soon, but as it is new years day I can't, so I was wondering if anyone knew the reason for this problem.
Thanks

Same issue with a wired aluminum keyboard. Using it with a 20" Intel iMac. I've also plugged it into a G5 20" iMac with no success. Worked for a few minutes but now not at all.

My shuffle will play for awhile , then blink red lights and then not work?!

hey
so...my ipod shuffle is werid.
I didn't use it for awhile because I couldn't find it ( my fault ;p)
then when I found it , I charged it and it would work fine, then all of a sudden it would blink red on and off really quickly then not work at all! Then I charged it again and it would work fine. That's not normal..is it?
Help please

try restoring it on your computer before using it again

The ADOBE conversion program is not working.

The ADOBE conversion program is not working, and I purchased a new computer. How do I transfer it?

You do not neet to transfer anything to your new computer.
Only thing you need to do is to download Adobe Reader XI from www.adobe.com if you use our service via Reader rather than web ui at https://cloud.acrobat.com(login (log in with your Adobe ID and password).
Please let me know if you cannot login to the above site.
Thank you.
Hisami

Sap xi SCENARIO source directory working ,but not working target directory

sap xi SCENARIO source directory working ,but not working target directory..
plz help me

Hi,
Be more specific on the problem you are facing so that the ppl here can help..
looks like your are trying to file to file scenario and the file is not generating at the target folder ...
then check the communication logs of the receiver adapter using RWB->CC logs..
post the error you have received there..
HTH
Rajesh

Worker does not work so well

Hi everyone,
     I am trying to decrypt an encrypted video in my opne-source project SparrowPlayer(https://github.com/yatsen-yang/SparrowPlayer),and I found that decrypting the video may block the main thread for several seconds.It resulted in stopping renderring UI assets on the stage, which is unacceptable.So I think 'Worker' may do some help. I followed the example code of the online API about Worker(http://help.adobe.com/zh_CN/FlashPlatform/reference/actionscript/3/flash/system/Worker.htm l). I tested and it worked well.
     But I found that if I embed the BGWorker.swf in other class like com.xx.Test instead of in the document class, 'Worker' did not work so well.Sometimes main worker could not communicate with bgworker even that the state of bgworker is running.
The example code followed:
    private function handleBGWorkerStateChange(event:Event):void
          if (bgWorker.state == WorkerState.RUNNING)
                  _statusText.text = "Background worker started";
                 bgWorkerCommandChannel.send(["startCount", 100000000]);
    It happened sometime, not everytime. If main worker send a message after 1 second when listerning that the state of bgworker is running, the code works well
    So it confused me. Logically, if the state of bgworker is running, it should mean that main worker can communicate with bgworker, and it works well if you embed the bgworker swf in the document class.But if you embed the bgworker swf in other class, you will have problem sometime.
    Finally, I found a solution.I embed the bgworker swf in other class instead of in the document class, and when bgworker initializes succesfully, it send a message to main worker.Main worker communicates withe bgworker immediately if it receives the message coming from bgworker.Now the problem is solved.
    I want to know why the state of Worker not reliable when I embed the bgworker swf in other class.Is it a bug of Worker?
    thanks

We would need to debug it to definitively understand the problem. I would recommend filing a bug with a simplified example that demonstrates the problem. If you post the bug number here, I'll escalate it to the engineering team.
Also, have you tried multiple browsers? We can always do that triage here, but it would be an interesting data point.

Iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

First, try to reset by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
If this does not help, connect in recovery mode and restore, explained in this article: iOS: Unable to update or restore

Edit Template in Dynamic Conversion Admin is not working

Latest oracle UCM 10gR3 is installed with patches and Site Studio 1ogR4 on windows XP and it is running fine.
When I click on "Edit Template" button after selecting a template in Oracle Content Server >> Administration >> Dynamic Converter Admin >> Edit template nothing happens and no error message is displayed. Some times a dialog pops up with message "preparing to install template editor..". The first time I clicked on this "Edit Template" button, it has installed "Template Editor 10gR3(10.1.3.4.1) version 9.0.0" successfully and it is there in program files.
I find that Dynamic Conversion is working fine by checking in a word doc and it generates HTML. I tried this on IE6 and IE8 on two different UCM installation by enabling IE to run all ActiveX and Javascript but it did not work on either. I am logged on as admin user.
What could be the issue and how to resolve?

Hi
Check Note.941978.1 to see the possible cause of the issue and also the workaround for the same.
Thanks
Srinath

Case when then not working

In my database, two variable ID and time (varchar2) are there. I want to populate another variable using case when then by putting below conditon to convert like this
But its not working. Can anyone help me
if time =1 day then '1 Day'
time > 2 days and time <=7 days then '2 to 7 days'
time > 8 days and time <=15 days then '8 to 15 days'
else 'not matching'
ID Time
12 1 days
23 244 days
12 2 days
14 4 days
15 6 days
17 9 days
select time,
case WHEN
UPPER(Time) = '1 DAY'
THEN
'1 day'
WHEN
UPPER(Time) Between '2 DAYS' and '7 DAYS'
THEN
'2 to 7 days'
WHEN
UPPER(Time) Between '8 DAYS' and '15 DAYS'
THEN
'8 to 15 days'
ELSE
'Not matching'
END "update time"
from table1

900487 wrote:
In my database, two variable ID and time (varchar2) are there. If you are storing Days in a column store it as NUMBER or INTERVAL data type. The way you have stored the value looks incorrect.
What you can do is extract the number portion of your time column and apply the CASE statement. Something like this
SQL> with t
2 as
3 (
4 select 12 id, '1 days' time1 from dual union all
5 select 23 id, '244 days' time1 from dual union all
6 select 12 id, '2 days' time1 from dual union all
7 select 14 id, '4 days' time1 from dual union all
8 select 15 id, '6 days' time1 from dual union all
9 select 17 id, '9 days' time1 from dual
10 )
11   select id,
12          time1,
13          case when time1 = 1              then '1 day'
14               when time1 between 2 and 7 then '2 to 7 days'
15               when time1 between 8 and 15 then '8 to 15 days'
16               else 'not matching'
17          end "update time"
18     from (
19              select id, to_number(regexp_substr(time1, '^[[:digit:]]*')) time1
20                from t
21          )
22 /
        ID      TIME1 update time
        12          1 1 day
        23        244 not matching
        12          2 2 to 7 days
        14          4 2 to 7 days
        15          6 2 to 7 days
        17          9 8 to 15 days
6 rows selected.

Chat Works then not.

I have a mini G4 with an iSight camera. Now I set up the buddies list. When I try to video chat and error pops up. Encryption not available. Gives you a link to .Mac and says you must upgrade to full membership for encryption to be allowed. I only see a phone beside peoples names . Would not let me audio or video chat then both worked once but then back to error messages.I have version 3.9 iChat and there is no SSL in the preferences. What can I do ?? My firewall is off and personal sharing checked. On Tiger 4.11..

update, i enter Nickname, then click Vietfun then click Login chatroom now, normally i will work but now it's just shown Connecting...

Centring of captivate swf working (.....and then not working!)

Hi
this is a mystery to me but maybe someone will have an answer
I have 5 slides been woking on them all weekend. I created a html container that centers the published swf from captivate 5 perfectly
Testing locally all works fine, uploading the same files to my web server and its all pushed to the left and not in the centered at all
After some head scratching I decided to go through the slides deleting one at a time and uploading to server and testing to see if it was an errant slide and after a while I found it. It was Slide two and when removed, allows the reaming four slides to be centerd in the html. Put slide two back in publish upload to web server it back and it goes to the left again. Testing locally and its centered.!
I have checked slide two and there is nothing odd about it at all, perfectly normal slide with some advanced actions
Has anyone got any ideas, has this happened before to anyone,
thanks in advance
KBN

Hi there
That is really an odd situation. In my understanding of things, there should be nothing about a SWF that determines whether centering would work or not. Makes me wonder if the simple existence of the slide is really more a red herring than anything else.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Working Sets not working

Has anyone got Working Sets to work with Flash Builder 4.5 for PHP as described here:
http://help.adobe.com/en_US/flashbuilder/using/WSc5cd04c102ae3e97bf51ac512e1410bae5-7ff6.h tml
I created an entirely new workspace to see if that might be the issue, but it was not.
I created a ticket.
https://bugs.adobe.com/jira/browse/FB-31092
Edited: Somehow the above bug either wasn't saved or got deleted. Here is the new link: https://bugs.adobe.com/jira/browse/FB-31189

I found a workaround. After Flash Builder for PHP loads, close the Package Explorer that has the broken working sets. Then open it back up by going to Window --> Show View --> Package Explorer.

Gifting 'whole work' does not work

I don't know if anyone else has run into this issue, but it is very frustrating. I tried writing to the itunes store for support, but was answered with a form letter that did not in any way try to address my issues, so I am posting here for 'support,' to avoid further frustration with this, while I await another response from itunes personnel. Here is the longish version, so please bear with me. I wanted to make a gift of a classical work to a friend, but first I wanted to see what that gift would look like coming from Apple, and I also wanted to make sure I liked it enough to give it. So I opened a second itunes account for myself and tried giving myself the gift first. I selected the 'whole work' option from the itunes list, moved it into the playlist I had created for this purpose, clicked the arrow to the right of that playlist folder and continued to select it as a gift to my other account. What I got was just the second and third movements of the work, the first movement was not included. I played around with this and found that indeed it would not work to purchase the whole three movement work as a gift, even though in the itunes listing, it said that if you wanted that first movement, you would have to purchase it as part of the whole work. It just wouldn't do it though. So, as an experiment, I tried purchasing the whole work directly, right into my account, my computer, not as a gift to myself or anyone else. And, well, that worked. So, why can't I purchase it as a gift? And if it just isn't possible to do this, why is that? How come I can buy it for myself and not for someone else? I'd really like to understand this. Thanks in advance for any insight.

What you are looking for is the Work Area Bar (WAB). You can then set the Export/Share to only the Work Area for most Export formats. Do not forget to do this. It's usually with a drop-down, or a checkbox.
Good luck,
Hunt

Hp 2000-2b89wm usb ports stopped working and sound has started to work then stop working

My wife bought a Hp 2000-2b89wm notebook brand new alittle over a year ago. Has had a few minor issues but nothing major. About a month ago after it downloaded a bunch of updates the sound would work if you boot the computer but after about 10 minutes the sound would cut off. If you reboot the computer it will work again, but it is the same thing over and over. Today we found the all the usb port have stopped working. The system says they are there and working, but they will not find anything or work. Any ideas how to solve these problems?? She has alot of info. on the system so she really doesn't want to do a restore, and she cannot back everything up on a flash drive because the usb ports are not working. We would be thankful for any help on this issue!

Hi pacman43,
I believe that your problem may be caused by a Windows update. At this time there is a Windows update the may be causing the sound to stop working on some computers. The update is KB2962407, and it is now an “Important” update. That means that it will be installed by Windows Update unless you hide it.
1. Follow the steps in this document are attempted: No Sound from Speakers (Windows 8)
2. Try creating a new user account. The changes forced by the update may only affect one user. This HP document shows you how to create a new user under the “Creating a new account in Windows 8” section: Managing User Accounts and Logins (Windows 8)
If this did not resolve the issue, then follow this information from SuperMario1 for troubleshooting the update.
First, you can try the Hotfix in this Microsoft document, specifically to address KB2962407: Windows RT, Windows 8, and Windows Server 2012 update rollup: June 2014
If that doesn't help, then uninstalling the Windows Update, and then hiding it, is the only method of eliminating the issue if it caused by this update. Here is the procedure for uninstalling the update:
1. Go into Control Panel, then click on “Programs and Features”.
2. Click on “View Installed Updates”. Look for the update with the ID number KB2962407.
3. Right-click on the update and select “Uninstall”. Restart the computer.
Next, here is the procedure for hiding the update:
1. Go into Control Panel, then click on “Windows Updates”.
2. Click on “Check for Updates”. When the process is completed, is should find important update(s) available. Clicking on the message will open a window where the important update(s) is.
3. Right-click on the KB2962407 update and select “Hide Update”. This will prevent the update from being installed next time Windows Updates are being installed.
I hope this information helps, please let me know how it goes.
Good luck and have a great day!
I worked on behalf of HP.

Implicit conversion working then not working (ORA-017222)

Similar Messages

Maybe you are looking for