Implmenting Reminders for a Notification - What is the correct method?

Hi,
I am trying to implement sending out reminders to a person who has a notification open.
A Manager(UserA) gets assigned a notification(NoteA) to approve/reject. After 7 days, he should get a reminder saying that NoteA is waiting for his decision. The way I implemented this is that after 7 days, the NoteA times out and sends out a new notification(NoteB).
However, the problem is that within 7 days, the UserA might have reassigned this NoteA to another Manager(UserB) for evaluation. So, when it times out, NoteB gets assigned back to UserA. Needless to say, UserA is now unhappy!
There was an example in the FAQ about implmenting reminders, but I beleive even if I implment the method suggested in the FAQ, I will end up with the same problem described above, since the reminder notifications will still go to UserA.
Would appreciate any help on the corrrect method to implment reminders. FYI- I am using standalone workflow.
Thanks
Dev

Dev, you could always write a post notification function which detected the REASSIGN and assigned the new performer to an item attribute, which would then be used as the performer for the reminder notification.

Similar Messages

What is the correct method to configure PC3500 memories?

I am working with Neo2-LS.
Where exactly in the BIOS setting, I need to set the correct speed?
At the moment, it's working with 400MHz. instead of 433 MHz. as it should.
Thanks.

PC3500 or 433MHz only tells you that the RAM has been validated to run at that speed without problem. But now you're putting on a Springdale chipset system, of course it's running at 400MHz, the top speed supported by SpringDale chipset, unless you want to go further by overclocking the FSB which will indeed increase the RAM speed too.

Zenphoto setup - what is the correct method for proper permissions?

http://www.zenphoto.org/
Permissions are "drwxr-xr-x 3 root root" for all directories mentioned
apache DocumentRoot is default of "/srv/http"
Zenphoto is extracted under http in a folder named "photos". When I initialize the Zenphoto setup in my web browser, I receive numerous errors that the setup php does not have write permissions within the "photos" directory.
The setup recommends setting 777 to all folders within and including the "photos" directory (zenphoto base).
I really don't want to set 777 permissions... Zenphoto setup doesn't complain if I set permissions to 775. But I am wondering if there would be less issues if I just set the "photos" directory recursively to the owner of "http"
Which would be best/proper?
Thanks!

I notice that if I do a repair permissions 2 or 3 times in a row that some of the same permissions are repaired again and again.
I assume you are referring to the log entries which contain "We are using special permissions..."
If so, you can safely ignore those messages. They are purely informational. This is not indicative of a permissions problem.
There is also no need to repair permissions while booted from the system DVD. Running it the way you are is fine, and you should only need to do it when you have a problem with your machine resulting from improperly set permissions.

What is the correct method of transfering music fi...

kindly instruct how to transfer music tracks from the pc to the phone n73? is it better way to transfer through mass storage or using nokia pcsuite-drag and drop to phone icon?

It depends as its posted above. You could also BT the files or use OVI files to put the files on the cloud and access them from your phone.
You can put the memory card in a card reader and load the songs that way.
640K Should be enough for everybody
El_Loco Nokia Video Blog

VMI: reduce Stock in transit - what is the correct method?

Hi Gurus,
We are using APO/SCM system to implement VMI functionality to replenish stock at customer location. We need to build stock in transit at customer location after PGI happens in ECC.
Now, stock in transit is show up in 'Stock in transit' key figure, but the question is how to reduce stock in transit once it is received at customer location.
SAP recommends following four methods to reduce:
http://help.sap.com/saphelp_scm2007/helpdata/en/f1/f69a3dcbcfac53e10000000a114084/frameset.htm
1. Goods receipt information is not sent from the customer to the vendor
2. The open purchase order quantity is sent from the customer to the vendor
3. A proof of delivery is sent from the customer
4. The stock in transit quantity is sent from the customer to the vendor
Out of these 1 and 2 methods are feasible in our scenario.
Please share your experience if you have used any of these methods, I want to hear from someone who implemented any of these methods before deciding on a method.
Thanks in advance,
Niranjan

After research and testing I found second method looks good to me. I tested in our test system, this works pretty much they way it is described in the help (link in above message) . The issue is resolved.

What is the correct method of removing a green screen background to insert a new digital background?

I am using Photoshop Elements 10 and can't seem to remove the green screen correctly. When I select the "magic wand" and click on the green screen background it selects it as it should. But when I hit the delete button on my keyboard it deletes the green background but a white background remains. So when I go to select my image to drag it to my digital background the white background goes with it.
In the tutorial video I watched it shows a grey and white checkered background after deleting the green screen which allows the user to select and move only the image to the new digital background. I am following the steps exactly but still can't seem to get it to work. Any ideas?

I don't know about 10 but in In PSE 8 there is a "Magic Extractor" ( ALT+SHIFT+CTRL+V) (on the mainu it's under Image ) which makes waaay too easy to seperate a selection from the background
http://help.adobe.com/en_US/PhotoshopElements/8.0/Win/Using/WS083AC514-D907-483b-84A1-4EA3 989C4C65_WIN.html
As already mentioned, the trick with the "background layer" is to right click on it in Layers and use "Layer from background"This will turn it into a "regular layer".
Then add a another new layer and on this new layer paste your cut-out you created earlier using the magic extractor.
D

TS4000 What is the "correct" date and time settings for icloud reminders?

What is the "correct" date and time settings for icloud reminders?

Sep. 18th. We don't know what time.

HT4970 My reminders app will not want to create reminders for me. What could be the problem, how to fix it? Thanks in advance

My reminders app will not want to create reminders for me. What could be the problem, how to fix it? Thanks in advance

Lol idk I updated this iPhone right when I got it because it said there is a new update so I installed it as soon as possible and there is no plus sign over there. I don't know how that happened maybe its something in the setting do you think you know? And when I ask Siri to create me a new reminder and I tell her the time and everything she says are you sure you want to create this reminder I press confirm and then she says I'm sorry but the reminder you are trying to create can not be crated.

Dears, i have purchased a new macbook pro with lion os, then after a while for a notification to update the iPhoto app, and when i tried to update it said that unable to update, then i uninstalled it, then i tried to install it but it said these apps co

dears, i have purchased a new macbook pro with lion os, then after a while for a notification to update the iPhoto app, and when i tried to update it said that unable to update, then i uninstalled it, then i tried to install it but it said these apps connot be installed on this computer!!!!!
what should i do
this problem started to annoy me, as am not able to edit any photo.
pls help ASAP

Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
Thanks really appreciating your help

What is the correct cable for iMac 11,2 Intel core i3, mini dvi to vga or mini display port to vga?

What is the correct cable for iMac 11,2 Intel core i3, mini DVI to VGA or mini display port to VGA to hook up to projector? Thanks!

mini-DisplayPort.
Regards.

I have replied to you three times now without reply. I DID NOT authorise a payment of £9.99 for NowTV. What is the solution to getting my money refunded. I think you assume I will go away after being Ignored. No I will not go away. I find now that you hav

I have replied to you three times now without reply. I DID NOT authorise a payment of £9.99 for NowTV. What is the solution to getting my money refunded. I think you assume I will go away after being Ignored. No I will not go away. I find now that you have DISABLED MY APPLE ID. Is this a punishment you use to anyone who takes up a stand against charges being made unauthorised on their account?. Please tell me why you have disabled my account. When will my account be restored? If not when will you refund ALL my purchases made to APPLE/ITUNES? I can then move on to another brand and hopefully better customer service. After reading articles regarding APPLE ID DISABLED it appears common practice from your company to DISABLE anyone's account if they question unknown charges. Please reply with your intentions regarding the unauthorised payment and the DISABLING of my account.
David Forrester.
Sent from my iPad
On 18 Mar 2014, at 09:20, iTunes Store <[email protected]> wrote:
Follow-Up: 319042795
Hello again,
I wanted to send a quick note to see if you are still experiencing any difficulties with the iTunes Store. Resolving your issue is important to me, so please don't hesitate to reply if you need any further assistance.
Sincerely,
iTunes Store Customer Support
http://www.apple.com/support/itunes/ww/
Dear David,
Welcome to iTunes Store Customer support.
I understand that you have been charged an additional 9.99 GBP for a purchase that not authorized. I know how eager you are to know more about this purchase and I am happy to look into this for you.
David, the purchase worth 9.99 GBP was for a day pass from "NOW TV for Apple TV." To review your iTunes Store account's purchase history, please follow the steps in this article:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
Please reply to this email and let me know if this purchase was unauthorized.
Thank you for being an iTunes Store customer. Have a great day!
Sincerely,
iTunes Store Customer Support
http://www.apple.com/support/itunes/ww/
Lang_Country: en_gb
User Storefront: UK
Concern Type: Problem Not Listed
Web Order #:
Content Title: NOW TV Day Pass
Provider Name: BSkyB
Track IDs: []
Purchase Date : 2014-03-16 12:33:48 Etc/GMT
Purchase Device : Apple TV
Comments : I am being charged for what is listed plus another _9.99 for Apple TV pass. Did not authorise this _9.99 charge and not sure what it is exactly.
<Personal Information Edited by Host>

This is a user-supported board. You are not addressing Apple here. Nor is it a good idea to post your private information to a public forum. You should edit your post immediately.
Unfortunately no one here can access your support history. You must respond to the emails directly.

What is the correct syntax for using a variable in an ad hoc query?

Hi all
I am an occasional DB user and at the moment need to update about 1000+ records so that a certain column gets a unique value.
So I thought that I would use a variable for this.
I then built this kind of SQL statement for just a small subset of the records:
variable recNumber number;
exec :recNumber := 1;
UPDATE TABLE_TO_BE_UPD
SET COL_TO_BE_UPD = COL_TO_BE_UPD + recNumber
WHERE COL_TO_BE_UPD IN ('VAL_A','VAL_B');
I get the invalid SQL statement error when attempting to execute above (besides the prompt that asks for a value which I would like to omit).
Anyway I also tried this one:
CREATE SEQUENCE seqCounter;
UPDATE TABLE_TO_BE_UPD
SET COL_TO_BE_UPD = COL_TO_BE_UPD + seqCounter.NEXTVAL
WHERE COL_TO_BE_UPD IN ('VAL_A','VAL_B');
From this one I got the error ORA-01722: invalid number...I am guessing this comes because seqCounter is of type number and the COL_TO_BE_UPD is of type character...(?)
So what I would like to ask is what is the correct way to define and use a counter type of variable to append a number at the end of a character string?
Also another question that I would like to ask is that are variables that are used in ad hoc queries also called 'bind variables'?
Thanks muchly

If you want to append a unique number to a column then this would do it:
UPDATE TABLE_TO_BE_UPD
SET COL_TO_BE_UPD = COL_TO_BE_UPD ||to_char(rownum)
WHERE COL_TO_BE_UPD IN ('VAL_A','VAL_B');

What are the different methods to find the user-exit for any requirement?

Hi Everybody,
What are the different methods to follow to find the user-exit for any requirement?
Thanks & Regards,
Nagaraju Maddi

The following program search all the user exits involved with a T-code:
Selection Text: P_TCODE: Transaction Code to Search
Text Symbols: 001 - Enter the Transaction Code that you want to search through for a User Exit
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP® User Exits exists.
*& Tables
TABLES : tstc,     "SAP® Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP® Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
* Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
* Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
* Find SAP® Modifications
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
* Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

Why we go for SAP ?what are the benifits to implement SAP inanyorganizat?

Hi,
Why we go for SAP ?what are the benifits to implement SAP in any organization?
Early reply is highely appruciable.
Regards,
Chow.

Hi
check following link for ur doubts
http://www.sap.com/solutions/business-suite/erp/businessbenefits/index.epx
Some key points to switch to SAP is like
Focus on Business Processes
Elimination of Redundant Data (Common & Consistent Data)
Easier Corporate Consolidation
Better Managerial Control
Elimination of Interfaces
Faster reaction to changing structures
Organization/Customers/Competitors
Integration is the Key
Integration of all business modules
Major reduction in time required for accounts finalization
Easier Corporate Consolidation
Cost control Batch wise / Cost centre wise
Centralised Inventory planning and control
Reduction in Inventory carrying Costs
Best Business practices across the organisation
Elimination of redundant data
Better Managerial control
Data Integrity
Enhanced Organisational flexibility
Improvement in Personal productivity
High Data availability
Improved Order cycle time / accuracy / cost
hope this is what ur looking for
If not pls revert
Vishal...

What is the correct part number for the LCD inverter board for an A1138 15" powerBook G4 ( 1.67GHz superdrive/ Hi-res)?

What is the correct part number for the LCD inverter board for an A1138 15" PowerBook G4 ( 1.67GHz superdrive/ Hi-res model)?

Hello,
Part number 614-0305-A
Hope this helps.

Implmenting Reminders for a Notification - What is the correct method?

Similar Messages

Maybe you are looking for