Import 2015 crm solution in to 2013 crm(online)

Hi ,
I have did some customization in a 2015 online CRM. Want to move them in to online 2013 CRM.
But the solution import is failing, as the customization contains options set also.
Getting the below error.
Any help will be appreciated.

Please refer MS CRM SDK, it has
complete details on compatibility
Microsoft Dynamics CRM Training|Our Blog |
Follow US |
Our Facebook Page |
Microsoft Dynamics CRM 2011 Application Design
Make sure to "Vote as Helpful" and "Mark As Answer",if you get answer of your question.

Similar Messages

CRM Solution Imported - Undo Applied Changes

Hello,
I'm new guy on CRM and I was working with CRM 2011 and I wanted to know if is possible to undo all changes that was applied when imported an unmanager solution.
My idea was to delete the solution that was added, but all changes still remain.
I will apreciate all help that you can provide me.
Thank you very much,
Regards & Blessings.

Hi Kent,
Unfortunately, changes applied after importing an unmanaged solution cant be rolled back as it over rides all the changes previously made. You can also refer this great blog by Ben for better understanding of Solutions in CRM.
https://community.dynamics.com/crm/b/crmbusiness/archive/2014/03/31/crm-2013-understanding-solutions-and-how-they-work.aspx
Regards
Abhishek
Regards, Abhishek Bakshi If you find this post helpful then please Vote as Helpful and Mark As Answer. Check my blog on https://mydynamicscrmblog.wordpress.com/

2013 CRM Upgrade - impacts to basic configuration

I am getting ready to go through a 2011 CRM to 2013 CRM upgrade. I am not a programmer or developer however I have been tasked with configuring the 2011 CRM application (we have CRM, proRM & xRM) and need to understand if & how those configurations
will be impacted by 2013. When I refer to 'configurations' I am referring to the following:
System Views, Personal Views, Updated OOB forms, Processes - dialog & workflow, enable/disable buttons & Dashboards.
I've done research on 2013 CRM and there is a lot of information on the environment set up - which is in the hands of other project team members - what I am having difficulty finding is impacts to the above 'configurations'. Any help or information
on any or all of these configurations would be greatly appreciated. Thank you.

hello,
your question is a bit broad. I will try to reply with the best of my ability.
CRM 2011 to 2013 is a bit tricky because of the changes made in .net framework, JavaScript etc. So any out of the box features like the views, forms etc will upgrade will out much issue.
based on the framework used, your custom buttons, custom workflow activities etc may need some tweaking.
easiest option would be to take a CRM 2011 database backup, restore it as a new SQL server database, use organization import wizard to convert it to a CRM 2013 instance.
the above step assumes that the plugin and JavaScript is already covered by the programmers.
let me know if you have any questions.
Jithesh

Outlook 2013 with Dynamics 2013 CRM Plugin extremely slow

I have recently upgraded my Dynamics CRM server from 2013 to 2013 SP1
All of my user machines (VDI) have office 2013 with the Dynamics CRM 2011 plugin installed (I previous had Dynamics CRM 2011 on a seperate server, but 2013 was released before we set it up and so I removed the old 2011 server).
The website has a GlobalSign SSL against it and runs fine internally and externally. I also have a terminal server running Server 2012 with Outlook 2013 and the Dynamics CRM 2011 plugin and this also runs fine.
My machine was running fine but I decided to upgrade the Outlook plugin to 2013 and that's where my problems started. I removed the 2011 plugin (and even followed the detailed guide on how to completely remove it) and then installed the 2013 plugin.
It installed fine but when I use it, it is ridiculously slow. For example, I highlight an email and then click "Track" in the tool bar. What should happen is the little icon of the blue/green people should appear next to it and then the options for
"Convert To" text should be available, but they are not. The button at the top changed to read "Untrack" but that's it, making it completely unusable. If I go an make a tea, and then come back and then go an make another tea, sometimes
it will have updated by the time i get back, but generally it does not. I can close and re-open outlook and still the icon does not display next to the email. Interestingly although the button at the top reads "Untrack" which indicates that it is
being tracked, the pane at the bottom reads "This email is not being tracked in CRM".
Now, if I logon to the terminal (RDS) server (that I mentioned above) everything works fine and Outlook updates immediately, all the machines are on the same VLAN and so I should be able to rule out firwall issues (that terminal server is still running the
2011 plugin) so that would indicate that this is a problem with my machine. I created a fresh machine and installed that same applications and the same problem was had, so that now indicated that its a problem with the plugin perhaps or something very specific
to my setup.
I had tried to download and install SP1 for Dynamics CRM 2013 for Outlook but on 2 separate machines I received the same error when installing
The log for my attempt last night shows:
23:11:44| Info| Refreshing previous hotfix ARP entries
23:11:44| Info| Writing registry entry SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\KB2466084_Client_1033
23:11:44| Info| Writing registry entry SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\KB2466086_Client_1033
23:11:44| Info| Writing registry entry SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\KB2547347_Client_1033
23:11:44| Info| Writing registry entry SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\KB2556167_Client_1033
23:11:44| Info| Writing registry entry SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\KB2567454_Client_1033
23:11:44| Info| Writing registry entry SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\KB2600643_Client_1033
23:11:44| Info| Retrieving current hotfix ARP entries for 0c524d20-1409-0060-8a9e-0c4c490e4e54
23:11:44| Info| Retrieving entry KB2466084_Client_1033
23:11:44| Info| Retrieving entry KB2466086_Client_1033
23:11:44| Info| Retrieving entry KB2547347_Client_1033
23:11:44| Info| Retrieving entry KB2556167_Client_1033
23:11:44| Info| Retrieving entry KB2567454_Client_1033
23:11:44| Info| Retrieving entry KB2600643_Client_1033
23:11:44| Info| Retrieving entry KB2888948_Client_1033
23:11:44| Info| value 'RegistryLocation': ''
23:11:44| Info| value 'HelpLink': 'http://support.microsoft.com/kb/2888948'
23:11:44| Info| value 'ParentKeyName': 'Microsoft Dynamics CRM 2013 for Microsoft Office Outlook'
23:11:44| Info| value 'UninstallString': 'C:\Windows\\$CrmUninstallKB2888948_Client_1033$\CrmUpdateWrapper.exe /uninstall'
23:11:44| Info| value 'NoRemove': '0'
23:11:44| Info| value 'ParentDisplayName': 'Microsoft Dynamics CRM 2013 for Microsoft Office Outlook'
23:11:44| Info| value 'NoRepair': '1'
23:11:44| Info| value 'DisplayVersion': '6.0.0000.0809'
23:11:44| Info| value 'Publisher': 'Microsoft Corporation'
23:11:44| Info| value 'DisplayName': 'Service Pack 1 for Microsoft Dynamics CRM for Outlook (KB2888948)'
23:11:44| Info| value 'NoModify': '1'
23:11:44| Info| Retrieving entry KB2941390_Client_1033
23:11:44| Info| value 'HelpLink': 'http://support.microsoft.com/kb/2941390'
23:11:44| Info| value 'UninstallString': 'C:\Windows\\$CrmUninstallKB2941390_Client_1033$\CrmUpdateWrapper.exe /uninstall'
23:11:44| Info| value 'DisplayName': 'Service Pack 1 for Microsoft Dynamics CRM for Outlook (KB2941390)'
23:11:44| Info| value 'NoRemove': '0'
23:11:44| Info| value 'NoRepair': '1'
23:11:44| Info| value 'RegistryLocation': ''
23:11:44| Info| value 'NoModify': '1'
23:11:44| Info| value 'ParentDisplayName': 'Microsoft Dynamics CRM 2013 for Microsoft Office Outlook'
23:11:44| Info| value 'DisplayVersion': '6.1.0000.0581'
23:11:44| Info| value 'Publisher': 'Microsoft Corporation'
23:11:44| Info| value 'ParentKeyName': 'Microsoft Dynamics CRM 2013 for Microsoft Office Outlook'
23:11:44| Error| System.Exception: Action Microsoft.Crm.UpdateWrapper.MspInstallAction failed. ---> System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at Microsoft.Crm.Setup.Update.HotFixArpEntryHandler.<>c__DisplayClass7.<RemoveSupercededEntries>b__5(ArpEntryDescriptor entry)
at System.Linq.Enumerable.WhereListIterator`1.MoveNext()
at Microsoft.Crm.Setup.Update.HotFixArpEntryHandler.RemoveSupercededEntries(IEnumerable`1 arpEntries, Version minimumVersionToKeep)
at Microsoft.Crm.UpdateWrapper.MspInstallAction.Do(IDictionary parameters)
at Microsoft.Crm.Setup.Shared.CrmAction.ExecuteAction(CrmAction action, IDictionary parameters, Boolean undo)
--- End of inner exception stack trace ---, Error, RetryCancel, Option1
23:11:50| Info| InputResult: Cancel
23:11:50| Info| CrmAction execution time; MspInstallAction; 00:01:12.9310905
23:11:50| Error| Install exception.System.Exception: Action Microsoft.Crm.UpdateWrapper.MspInstallAction failed. ---> System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at Microsoft.Crm.Setup.Update.HotFixArpEntryHandler.<>c__DisplayClass7.<RemoveSupercededEntries>b__5(ArpEntryDescriptor entry)
at System.Linq.Enumerable.WhereListIterator`1.MoveNext()
at Microsoft.Crm.Setup.Update.HotFixArpEntryHandler.RemoveSupercededEntries(IEnumerable`1 arpEntries, Version minimumVersionToKeep)
at Microsoft.Crm.UpdateWrapper.MspInstallAction.Do(IDictionary parameters)
at Microsoft.Crm.Setup.Shared.CrmAction.ExecuteAction(CrmAction action, IDictionary parameters, Boolean undo)
--- End of inner exception stack trace ---
at Microsoft.Crm.Setup.Shared.CrmAction.ExecuteAction(CrmAction action, IDictionary parameters, Boolean undo)
at Microsoft.Crm.UpdateWrapper.HotfixMspInstaller.Install()
at Microsoft.Crm.Setup.Shared.ComposedInstaller.InvokeInstall(Installer installer, IDictionary stateSaver)
at Microsoft.Crm.Setup.Shared.ComposedInstaller.InternalInstall(IDictionary stateSaver)
at Microsoft.Crm.Setup.Shared.ComposedInstaller.Install(IDictionary stateSaver)
at Microsoft.Crm.UpdateWrapper.UpdateSetup.Install(IDictionary data)
at Microsoft.Crm.Setup.Shared.SetupBase.ExecuteOperation()
23:11:50|Verbose| Method exit: Microsoft.Crm.UpdateWrapper.UpdateSetup.ExecuteOperation
23:11:50| Info| failed.
23:11:50| Info| Setup did not complete successfully.
Action Microsoft.Crm.UpdateWrapper.MspInstallAction failed.
The given key was not present in the dictionary.
23:11:50| Error| Setup did not complete successfully.
23:11:50|Verbose| Method exit: Microsoft.Crm.UpdateWrapper.UpdateSetup.RunInternal
23:11:50|Verbose| Update Not Completed
23:11:50|Verbose| Update Not Completed
23:11:50| Info| Service Pack 1 for Microsoft Dynamics CRM for Outlook (KB2941390) was not completed successfully because of the following problems:
Action Microsoft.Crm.UpdateWrapper.MspInstallAction failed.
The given key was not present in the dictionary.
23:11:50| Info| ActivatePage(HotfixFinishPage)
I also tried manually installing Rollup 2 before installing SP1 but I still get the same error.
Now I'm not sure if the Outlook plugin update is going to fix the problem, so as it stands I have 2 problems:
Very very slow Outlook CRM Plugin when updating emails and icons
Cannot install 2013 CRM SP1 for Outlook
So, I'm stumped, and this is really holding me back. I will post any updates here, but if anyone has any ideas, please let me know.

I have Outlook 2013 with the CRM 2013 Outlook client and it was running fine until about a week ago. I ran windows update and suddenly everything stopped working. I am going to try to uninstall all the updates until I determine which one is the cause
of the problem. It would be nice if MS tested before releasing updates...
Ken Compter

CRM Solution database How to main the problems and solution types

Hi
Can anyone tell me how to maintain problems and solutions in the CRM solution database , after setting up the TREX and SAF for the IC webclient .
we are unable to maintain the problem types with 1200 words in the problem description in IS01 Transaction We are unable to assign the codes to the problem type at the time of maintaining the problems and solutions in the IS01 transaction for solution database . after maintaining the problems and solutions the SAF indexing with full compilation and cluster compilation . the list of documents were showing successful status but when we search by the attribute type in the knowledge search the message is showing no search refinement found .kindly expedite the solution for the the above description
The TREX connectivity has been established successfully and the SAF is configured successfully without any errors in it but but we are unable to search the text based and attribute based search in the IC webclient knowledge search .
Regards
Vikas dinaker

Dear Vikas,
Kindly check C13_BB_Config guide as service marketplace.
It says in section 3.1.5.2.3 on page 57, the below mentioned paragraph.
3. On screen Create Problem maintain the following data:
Be sure that the descriptions of the following problem(s) and solution(s) are defined in all languages that you want to use (e.g., in the E-Commerce Internet Customer Self-Service).
4.Choose Enter. The default parameters are filled; please also see the NOTE following this description.
5.Enter the problem description listed in the box below. The first line should not exceed 40 characters, for this is like a short description of the problem that will be displayed in the first line of the hitlist in the search.
hope this helps
Amit

Solution Manager 4.0 CRM 5.0 (TREX)

Dear SDN
This is my first time using SDN and I would like to ask you for help, please. This is urgent!
We have Solution Manager 4.0 CRM 5.0
We would like to setup the Solution Database function in CRM Software Agent Framework. What version of TREX can we use to make full use of Solution Database SAF. Can we use TREX 6.1 or TREX 7.0 or is both versions compatible. We also look for an installation guide on Software Agent Framework CRM 5.0. We have an installation guide for CRM 4.0 SP6.But this refer to older components.
Thanks your help will be greatly Appreciated
Allistair Mcguire
[email protected]

hi
Thanks for the reply
I have setup TREX 6.1
Next problem, im trying to setup the solution database in SOLMAN 4.o
but when i go to trans IS01 and try to create an Solution for the database i get an Dump OBJECTS_OBJREF_NOT_ASSIGNED.
please advise as to how to resolve this dump.
Thanks
Allistair McGuire

Difference between SAP/APO/DP and the SAP/CRM solution for forecasting

Hi,
Can you please help me identifying the main differences between SAP/APO/DP and the SAP/CRM solution for forecasting? Advantages and disadvantages?
Thanks a lot

Hi LCD777,
Forecasting at DP & CRM are altogether at different entities. CRM involves webbased data transfer mechanism tool whereas DP is database/livecache driven tool.
In CRM, you dont get optimised solution of forecasting out of it whereas in DP you can get as much as
optimised solution & flexibility as per your requirements.
DP is majorly a forecasting tool where in huge statistical method functionalities are embedded in
whereas CRM is majorly a transactional tool wherein it involves gathering of forecast data and executing it.
Typically, CRM will be integrated with DP containing GATP environment & ECC so that DP will plan for forecast data, ECC system drives sales order data & GATP calls for availability check and finally
the forecast execution& transactions will be controlled by CRM
Regards
R. Senthil Mareeswaran.

Solution data base in CRM

Hi
Can any one please let me know about this CRM solution date base management.
where I will get the required links.
how good one should be to handle this Solution data base job.
THough I've worked in CRM, I'm not into this SDB.Please help me out in this regard.
Regards,
Polite

Hi Blake,
Below are the list of Function Modules that will get all the relavant information about IBASE:
CRM_IBASE_GET_DETAIL     Get Details for the Ibase
CRM_IBASE_COMP_GET_DETAIL     Get Details for the Individual Componets
CRM_IBASE_COMP_GET_PARTNER     It gives the partner details of the individual components
CRM_IBASE_GET_PARTNER     It gives the partner details of the Ibase
For a complete set of all the IBASE Related functionality you can have a look at the following Function Group:
IB_CRM_API - IB: CRM APIs for IBase
Thanks,
Samantak.
Rewards points for useful answers.

CRM SOLUTION CONSULTANT

Hi
I want to know what kind of profile is Crm Solution Consultant and whether it's worth enough to take that career?

Personally I would go into something else that is more customer centric. Have you considered becoming a "store-greeter"? I think you would find that role and software involved is much better implementation of customer relationship management and plus you wouldn't be stuck in a time warp living in the year 2007 if you went with SAP CRM 2007.
Think about the perks: smiley faces, price rollbacks, and great looking blue vests.
Good luck,
Stephen

Activating Sandbox Solution in SharePoint 2013

Hi,
I am having a Single Server (Windows Server 2008 R2 Standard) with Microsoft SharePoint Server 2013 installed on it.
I have one CRM solution which is sandbox solution and I want to deploy it on site collection.
When i am going to SiteSettings > Solutions and upload the solutions and click on Activate button .. nothing is happening and solution is not getting activated. When I tried same with powershell using Install-SPUserSolution, I am getting below error,
Install-SPUserSolution : Object reference not set to an instance of an object.
At line:1 char:1
+ Install-SPUserSolution -Identity crmlistcomponent1.wsp -Site
http://in-mum-appcs ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...allUserSolution:
SPCmdletInstallUserSolution) [Install-SPUserSolution], NullReferenceExcept
ion
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletInstallU
serSolution
Also, "Microsoft SharePoint Foundation User Code Service" Service is missing on Services On Server page so that I could
not start it. However I started "SharePoint User Code Host" service in services.msc
Please help me out, As I have got stuck in this problem from long back.
Thanks

From PowerShell, run:
Install-SPService
See if the User Code Service is visible on the Manage Services on Server page.
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Migrating from CRM 2011 on-premises to CRM Online (Attachments)

I need to move our CRM 2011 on-premises to CRM Online. I got my customizations into CRM Online. My next task is to get the data there. Some are easy but I am not sure how to handle
1) Interconnected records. For instance a case is connected to an account, emails, products, etc. I figured I just will
    a) export and then import leads first as accounts are connected to leads
    b) export and then import emails and products
    c) export and then import cases
However, how to I assure that all these records are still having the same connections (case 100 connected to email 501 and 502, etc)
2) Some records have files associated with them. The biggest one is emails that have attachments. How can I get these emails into CRM Online including attachments?

Thanks. Scribe is way too expensive. SSIS might be an option I need to explore more. Any opinion about Microsoft Dynamics CRM Instance Adapter? I am reading some articles about it and consider giving it a try. However, I can't even find the download despite
a lot of searches.
https://community.dynamics.com/crm/b/magnetismsolutionscrmblog/archive/2013/03/12/microsoft-dynamics-crm-2011-instance-adapter-part-1-downloads.aspx

Errors in PHASE DIFFEX phase during the CRM 6.0 upg from CRM 5.0

Hello,
I am in the process of upgading our CRM systems from CRM 5.0 version to
CRM 6.0 and having issues at the PHASE DIFFEXPADDE during the upgrade
right after the DB_ACTION_LOWQ1 phase and ADJUSTCHK being the previous
phase.
We are currently at CRM 5.0 dual stack system on Linux X86_64 SLES9 and
DB - Oracle 10.2.0.2.
I was able to finish the PREPARE phases on both ABAP & JAVA stacks
successfully.
The phase DIFFEXPADDE is failing with a error message in the
DIFFEXPA.ELG which I have mentioned below. I am also attching few other
related logs for your reference in the attached zip file
(DIFFEXPA_logs.rar)
DIFFEXPA.LOG
UpgDialog.log
SAPECCI700.C15
TP00.ECO
SAPup.log
"~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ADD ON OBJECTS (DATA)-Export ERRORS and RETURN CODE in SAPECCI700.<SID>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW190 "INDX" "WFMFC_INDTOR_GRP 01 " has no active
version.
Long text:
Cause
You have tried to export a Dictionary object that has no active
version. The reason for this probably is that the author of the DD object has forgotten to activate it.
System Response
The transport request is not released.
What to do
Activate the Dictionary object and repeat the export.
2EETP200 Export with errors, request will not be imported
Long text:
Cause
The export was finished with errors or terminated (return code >=
8).
System Response
The request is not imported. Instead it is set back to "can be
changed"
in the source system.
What to do
The export log contains remarks concerning the reason for the
incorrect
export. Correct the error and repeat the export.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ADD ON OBJECTS (DATA)-Export ERRORS and RETURN CODE in SAPECCI701.C15
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ADD ON OBJECTS (DATA)-Export ERRORS and RETURN CODE in SAPECCI702.C15
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I am stuck at this step and unable to move forward until I get past
this error. Please let me know how do I proceed and if you have any
more questions.
Would appreciate your early help!
Thanks in advance!

I was able to get past this issue by logging in to the client 000 and
activate the object WFMFC_INDTOR_GRP from transaction SE11.
Dictionary Object --> Activate from the menu bar. Gave me few warnings
but did not error out.
Hence went past the phase and the upgrade is progressing as of now.
However, can you please confirm if this is a correct fix or do you want
me to do anything different since I have not reached the MODPROF_TRANS
phase yet.
Thanks

Is CRM 2007-SP5 same as CRM 7.0?

Hi All,
I want to know is CRM 2007-SP5 same as CRM 7.0? or what is the difference between them? and what is the difference between CRM 2007-SP4 and CRM 2007-SP5 ?
Where can I get more information? I saw note 1269655 but want to get more info.
Thanks,
Deepali

Hello Deepali,
You can check is service market place.Please find the below path:
service.sap.com/instguides> SAP Business Suite Solutions>SAP CRM
Under this you can find different versions of CRM and their details.
Hope this helps!
Regards,
Shanthala Kudva.

CRM 4.0 alerts in CRM 2007

We had configured a number of alerts in CRM 4.0. We have recently upgrade our system to CRM 2007 and these alerts no longer work in the CRM 2007 web IC. is there a conversion process or do these need to be recreated from scratch? Any documentation on this topic?
I look forward to your response on this issue.
Regards
Eddie

Hello Eddie,
Yes, in general alerts, interactive scripts, navlinks, and other items need to be recreated in when moving from CRM 2005 (or lower) to CRM 2006s/CRM 2007 or higher. In the case of the alerts, the old XML based alerts (used in CRM 4.0) and the newer IMG configuration based alerts (CRM 5.0) are both replaced by a new BSP-based tool called the Alert Editor -- which is available in the IC Manager busines role. The new alerts use the new target ID navigation concept, which is part of the reason the old alerts don't work anymore (for alerts which contain navigation links).
Warm regards,
John

Sharepoint Taxonomy Control in sandbox solution in sharepoint 2013

Hi,
We have requirement to bind termsets into taxonomy control using sandbox solution in sharepoint 2013.
I cannot use webpart,and APP. Below code added in aspx page in module.
i cannot write any code as this sandbox solution.
<%@ Register Tagprefix="TaxonomyField" Namespace="Microsoft.SharePoint.Taxonomy" Assembly="Microsoft.SharePoint.Taxonomy, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
%>
<TaxonomyField:TaxonomyWebTaggingControl ID="TWC" runat="server" SspId="08d413ac-c81d-4232-b1df-c2da46f9b21a" TermSetId="06c93fa1-8a76-4637-9b87-5e612276c199" AllowFillIn="true" IsMulti="false"
IsDisplayPickerButton="true" Language="1033" IsAddTerms="true" >
</TaxonomyField:TaxonomyWebTaggingControl>
This is able to render the control, where as termsets are not being displayed.
Please help on this.
-Navya

I don't think hard coding SSPID and TermsetID is a good practice. Try to get the values through code and using unique names.
<Taxonomy:TaxonomyWebTaggingControl ID="TWC" IsDisplayPickerButton="true"
AllowFillIn="true" runat="server"
ShowTaxonomy(TWC, TaxonomyGroup, TermSetName);
public static void ShowTaxonomy(TaxonomyWebTaggingControl control, string taxonomyGroup, string termsetName)
SPContext context = SPContext.Current;
SPSite site = context.Site;
TaxonomySession tsession = new TaxonomySession(site);
TermStore ttermStore = tsession.TermStores["TermStore"];
Group tgroup = ttermStore.Groups[taxonomyGroup];
TermSet productsTermSet = tgroup.TermSets[termsetName];
control.SspId.Add(ttermStore.Id);
control.TermSetId.Add(productsTermSet.Id);
control.IsAddTerms = false;
control.AllowFillIn = false;
control.IsMulti = true;
control.IsIncludeUnavailable = false;
control.Language = 0;
if(termsetName==Constants.UserKeywordsTermSet)
control.AllowFillIn = true;
control.IsAddTerms = true;
Bala

Import 2015 crm solution in to 2013 crm(online)

Similar Messages

Maybe you are looking for