Import app from another server

Recieving an error when trying to import application that was developed on another server.
The error message is:
"ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 3: PLS-00201: identifier 'P_ID' must be declared ORA-06550: line 14, column 1: PL/SQL: Statement ignored <pre>begin wwv_flow_api.create_page_branch( p_id=>2434179818019486112 + wwv_flow_api.g_id_offset, p_flow_id=> wwv_flow.g_flow_id, p_flow_step_id=> 1, p_branch_action=> '2', p_branch_point=> 'AFTER_PROCESSING', p_branch_type=> 'BRAN"

Hi again scott.
well, we just tried and changed it to:
wwv_flow_api.create_page_branch(
p_id=>2434179818019486112 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_flow_step_id=> 1,
p_branch_action=> '2',
p_branch_point=> 'AFTER_PROCESSING',
p_branch_type=> 'BRANCH_TO_STEP',
p_branch_when_button_id=>2257454128020560151+ wwv_flow_api.g_id_offset,
p_branch_sequence=> 10,
p_branch_comment=> 'Created by Noone');
and i receive the same error, i think:
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 3: PLS-00201: identifier 'P_ID' must be declared ORA-06550: line 14, column 1: PL/SQL: Statement ignored <pre>begin wwv_flow_api.create_page_branch( p_id=>2434179818019486112 + wwv_flow_api.g_id_offset, p_flow_id=> wwv_flow.g_flow_id, p_flow_step_id=> 1, p_branch_action=> '2', p_branch_point=> 'AFTER_PROCESSING', p_branch_type=&g
so guess its not the problem then...

Similar Messages

Import emails from another server to iCoud

Hello. I would like to read my email from an email account I have created with my domain name on an hosting server company into my iCloud/Mail on my Mac. Is it possible? Thank you for your help.

You can drag mail from any account to any other in the Mail application on your Mac.

How do I import email messages from another server?

Heya,
So I can't figure out how to import mail messages from another server into this one? I had [email protected] pointing to the old one, when I repointed it obviously all my email "disappeared" because there is none on the new server. So how do I move it from the old server to the new one? Usually I'd just drag and drop the email message files over FTP but SLS doesn't seem to give me permission to do that on this one.
Thanks!

Search for discussions of the imapsync tool.

Loader will load images from another server, but then we get error on Bitmap operation

I'm developing an app that currently is using Loader to get images from another server. This shouldn't currently work since we are still waiting for the owner of that server to put a crossdomain file in place. However, it does work -- sort of .
Loader can load the images fine, without an error. But then the app has a feature in which we are making a larger duplicate of the image to display in a sidebar, we do this in this manner:
var myBitmap:Bitmap = Bitmap(loader.content);
and when this runs we get a Flash player security error 2122, sandbox violation.
So while I'm hoping all this will fix itself when the crossdomain.xml file is put in place, I'm confused as to why we only get the sandbox error when we make a Bitmap from the image, and not when we initially try to retrieve the image.
(Incidentally: is there a better way to make a "copy" of an image loaded by a Loader, and then change its width and height for simultaneous display in another part of the stage? I don't need to change its actual dimensions -- I just need to change its display width and height.)
Thanks!

The sandbox allows viewing, not editing from another server without a crossdomain.
So, when you try to load it up, it loads it, but "read-only" and gives you an error when you try to "edit" it by making a new Bitmap out of it.
This should resolve itself once that crossdomain is in place.
||EDIT||
I just realized I should clarify my statement a little more.
When you load images from another server without a crossdomain, it allows the load for display only. When you try to load data, it will fail. This is because, XML data, or some other type of data is editable by default, and images are only viewable by default. So, the image fails when you try to convert it into an editable form.

Chrome missing in Import data from another browser

I use both chrome and firefox portable from site portableapps because mozilla doesn´t have a portable version.
My dilemma today is this:
I always had on firefox on menu "import and backup" > > "import data from another browser" listing chrome like this
https://support.mozilla.org/media/uploads/gallery/images/2012-02-24-10-35-53-97ff60.png
today i want to import chrome bookmarks to firefox but chrome is missing on the list, in the past i always had it there listed now is just pointing to IE
Do i need chrome installed on machine to grab something from registry?
By what i can remember always had that option on portable versions, i am importating this with a fresh pc machine because i installed now windows where i previously wiped the disk from manufacturer erasing tool.
i digged the net and on questions here but cant find why its missing, can you guys tell me why?
P.S- i would like to say that this site, Mozilla and Mozilla support, forums and community are the best service i´ve seen in years over the whole web i believe its really the best one and am not writing this because of this question, only thing missing is having Mozilla apps portable, a online chat would be cool too for the community
Oh god i hope today the "fox" saves me cause i can´t find solution on this
You guys take it easy.....

Do you mean the portable version of Google Chrome as well?
*http://portableapps.com/apps/internet/google_chrome_portable
Which that version you probably need to export the bookmarks to an HTML file and import that file in Firefox.
You can open the Bookmarks Manager in Google Chrome (wrench icon > Bookmarks > Bookmarks Manager) and select "Tools > Export Bookmarks"<br />
This will export the Chrome bookmarks to a file bookmarks.html.<br />
You can import that file in Firefox: Bookmarks > Show All Bookmarks > Import & Backup > Import HTML : "From File"
* http://www.google.com/support/chrome/bin/answer.py?hl=en&answer=96816 - Bookmarks : Import or export bookmarks - Google Chrome Help

Hi, i am trying to open and view a report that comes from another server with different odbc connection

hi, i am trying to open and view a report that comes from another server with different odbc connection
i created a crystal report for a mysql database on my machine and everything works great
but we have other reports that come from other machines with different odbc connection
and this its not working when opens the report asks for credentials
and i cannot use the remote ip for these reports that come from other machine
question
if i cannot connect to remote ip to open the report
for each report i have to create a database the report database on my machine and then open the report ?
or there is some other way to open the report ?
i am using visual studio 2013 and mysql and
<add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
thanks

short
i have a report that it was created on another server with a specific dsn
now i am trying to open the report on my machine
the database from the other server does not exist on my machine
the server machine where the report was created the ip its not accessible
question ?
can i open the report on my machine or its impossible ?
thanks

How can i import contacts from another AIM account to this new one

If you reference my last ichat question, you will see that I have had serious problems and had to create a new account.
How can I import contacts from another AIM account to this new one??

Hi,
Use AIM for Mac and use the Export and Import features.
Other than that it is a question on making sure every Single Buddy has more than just their Screen name in the IChat Address Card so it is added to the Address Book and dragging them back from there
9:08 PM Thursday; February 7, 2008

Problem in accessing the media files from another server

Currently I am working in a project with streaming video on demand and using FMS 4.5.
Let’s say the FMS is installed on one machine say ‘121.123.35.34’ and there is another server ‘100.54.88.222’ where all the media files belong. Now we need to point to this third server to play videos from FMS.I have done the below changes:
In the fms.ini file: set the VOD_DIR2 = \\100.54.88.222\myvideos
In the application.xml: Added the stream: <Streams>/hr;${VOD_DIR2}</Streams>
From my application accessing the path of flv as:source= “rtmp:// 121.123.35.34:1935/vod/hr/test” . Not able to access the video.
Note: If I will point to say ‘C:hrvideos’ in VOD_DIR2, then I am able to access the videos using the same URL.
I also tried mapping the shared path to the FMS machine and then given the mapped drive path in the VOD_DIR2, but this also doesn’t work.
Please let me know:
If we need to configure any other parameter to stream videos from another server.
VOD_COMMON_DIR: I modified this similar TO VOD_DIR to location 'C:hrvideos', I am able to stream the videos using rtmp, but not abl eto stream with http.
          Please let me know can we stream using http also as we need this to run f4m manifest file.
          http://121.123.35.34:8134/vod/hr/sample.mp4.
          http://121.123.35.34:8134/vod/hr/sample.f4m
Thanks,
Anjali

Hi Shiven,
I followed the steps suggested by you:
1) Changed the stream:
<Streams>/hr;${VOD_DIR2}</Streams> to<Streams>/;${VOD_DIR2}</Streams>
But not able to access the video with rtmp:// 121.123.35.34:1935/vod/test
2) For http streaming, changes the HttpStreamingContentPath in hds-vod in the httpd config file, and tried to stream the video like:
http:// 121.123.35.34:8134/vod/test.mp4 or
http:// 121.123.35.34:8134/hds-vod/test.mp4
But not able to load the video.
Please suggest?
Thanks & Regards,
Anjali Rawat

Accept Mail from another server

We are testing a migration scenario and are running into a few issues. I have our new mail server setup with the same domain as our old. We will slowly be migrating from the old to the new, sort of like a split domain. The old server is running GroupWise 7, the new is Zimbra based.
What I am attempting to do is allow for users on Zimbra (using the same domain) to be able to send messages to users on Groupwise. So far I have been unable to find a setting in GWIA that allows me to say it is "ok" to accept email from this server. I believe that since both the Zimbra and GW servers are using the example.com domain GW is not allowing messages to go to mailboxes.
How do I setup Groupwise to allow messages from another server using the same domain?

I doubt that is it. Your GW system is set to receive messages for
@example.com and shouldn't care where they have come from. Your Zimbra
server should be set to forward to GW as a smarthost and have it forward
undeliverables to that host.
Usually, the Zimbra side is going to have problems, especially if it has all
of the addresses configured on it. It knows that it handles email for
example.com and will try to deliver it to itself, unless you do something
with undeliverables instead.
I think.......................
"dabrown ksu" <[email protected]> wrote in message
news:[email protected]..
>
> We are testing a migration scenario and are running into a few issues. I
> have our new mail server setup with the same domain as our old. We will
> slowly be migrating from the old to the new, sort of like a split
> domain. The old server is running GroupWise 7, the new is Zimbra based.
>
> What I am attempting to do is allow for users on Zimbra (using the same
> domain) to be able to send messages to users on Groupwise. So far I have
> been unable to find a setting in GWIA that allows me to say it is "ok"
> to accept email from this server. I believe that since both the Zimbra
> and GW servers are using the example.com domain GW is not allowing
> messages to go to mailboxes.
>
> How do I setup Groupwise to allow messages from another server using
> the same domain?
>
>
> --
> dabrown_ksu
> ------------------------------------------------------------------------
> dabrown_ksu's Profile: http://forums.novell.com/member.php?userid=90079
> View this thread: http://forums.novell.com/showthread.php?t=415905
>

How to update a table (CUSTOMER) on a Report Server with the data from the same table (CUSTOMER) from another server Transaction server?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) From another server ex: Transaction server?
Set up steps so inset, update or delete operation takes place across the servers.
It would be great if someone please enlighten me in details about this process in MS SQL Server 2008 R2.
Also please describe would it be different for SQL Server 2012?
If so, then what are the steps?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) from another server ex: Transaction server?
Set up steps so that inset, update or delete operation gets done correctly across servers.
I was not sure about the answer, it would be great if someone please put some light on this and explain in details about this process in MS SQL Server 2008 R2.
Also it would be very helpful if you please describe would it be different for SQL Server 2012? If so, then what are the steps?

Using Oracle Forms Importing Data From SQL Server into Oracle Tables.

Dear All,
We are using Oracle Forms 10g in windows XP and having OAS 10g and Oracle database 9i.
How can we import data from SQL Server 2005 into Oracle tables using Oracle Forms?
Thanks & Regards
Eidy

I have no idea what "Oracle Hetrogenius Services" is, so I can't help you with that, sorry.
SQL Developer might also assist you. SQL Developer can connect to SQL Server as well as Oracle and has some tools for migration. See the documentation for details:
http://download.oracle.com/docs/cd/E12151_01/doc.150/e12156/toc.htm
For additional help on using SQL Developer for this task, please consult Support or the SQL Developer forum: SQL Developer
Hope this helps,
Jacob

Import tags from another catalogue without develop settings

How do I import tags from another catalogue but not the develop settings of each image?
Here's whats going on:
I started with 5000 images on a hard drive. I gave a copy to someone else working on the project.
I physically moved images into real folders and edited all the shots.
She left all the images where they originally were and tagged each image.
I want to combine her tags with the edits that I've done, with the images in their new locations I've made.
I have a copy of her catalogue file.
I tried importing her catalogue into mine- which will pull her metadata tags, but only also with pulling her develop settings which resets all my work.
How can I import ONLY her metadata tags?
I can't open her catalogue and write the tags into XML sidecars because I've moved the images from where her catalogue says they are.
I realize we should have done this differently from the beginning, but with that being said- if I could import only her metadata tags then that should work. But Lightroom 4 only gives the options of importing BOTH metadata and develop settings.
Any ideas?

One option (backup your catalog first):
* Import her catalog (apply metadata and develop changes), which adds a "Paste Settings" step to the edit history.
* Restore previous develop settings using ScrewAutoSync, to roll back the settings by one step, to pre-"Paste Settings" state. - just make sure you *don't* do this to photos that weren't changed by the catalog import. One way to do that is to apply a no-op (do nothing) preset to all photos before importing the catalog (that way if you inadvertently roll 'em back one, they'll be the same as they were). You must create a no-op preset by hand, or use this:
http://www.robcole.com/LrForumSupport/Clear Edit History.lrtemplate
(hint: context-click & select "save link as")
There are probably other options.
Rob

I am trying to publish a web site using my own domain. How do I transfer my host to mac from another server?

I am trying to publish a web site using my own domain. How do I transfer my host to mac from another server?

I've created a CNAME entry to redirect the domain to apple but the site is still not live! Can anyone help please?
Did you also do what is required in the .Mac account settings?
http://help.apple.com/mac2/1/help/member/pgs2/memfmsetgen367.html
Could you provide your urls?

Import data from sql server /vice versa

My Database serevr version is 10.1.0.3.0.
Sql Server 2000.
Is it possible to import data from sql server to oracle database?
Also other way around.
I mean import data from Oracle to sql server.
Regards,
D

Hi,
You can use Heterogeneous Service to do this. This component is free but poor of resources. Simple things you can do with this, complex I really don't know.
Also, to import from sqlserver to oracle you can use Oracle Warehouse Builder, an Oracle ETL tool. But, OWB do not work in other way, oracle to sqlserver.
And why do want to use sqlserver, if you have oracle?
[]'s,
Gustavo.

Import data from SQL Server into MS Word document for Mail Merge purpose ?

Hi,
Is it possible to import contacts from SQL Server into MS Word for mail merge purpose or if retrieving data from MS Excel can we update the data in MS Excel sheet without opening it ?
Note: Remember when you open a word document already set up for mail merge, asks you to run the query to return all records from the excel sheet it is connected to.
Khurram

Word and the current data source dialog do not really give you any help with that.
You either have to be able to create a View in SQL Server that performs the query you need, then connect to that, or you have to be able to create the correct query manually (or perhaps using some other query tool that can help you), then use VBA to connect
using that query.
For example, if you have been through the connection process once (connecting to a single table) then you will have a .odc (Office Data Connection file) which has the info. needed to connect to the correct server and database. It's a text file with some
HTML and XML inside. You can copy/rename it. Let's say it is called "c:\a\myodc.odc" Then in VBA you can use something like
ActiveDocument.OpenDataSource Name:="c:\a\myodc.odc, _
SQLStatement:="put your SQL statement in here, and if it is long,...", _
SQLStatement1:="put the second part in here"
You get a maximum of either 255 or around 511 characters in the SQL statement, and Word tends to impose some syntax requirements that Transact-SQL does not, so e.g. you may need to quote all your table names.
You can also se an empty .odc file and provide connection info. in the COnnection:= parameter in OpenDataSource.
As background, until Word 2000, by default you would use MS Query to create your SQL query, and MS Query does have facilities that can help you build your query (a bit like the ones in MS Access). That may still be possible (it is a bit harder to find the MS
Query option now, and I am not sure it works with the latest versions of Word). MS Query only works for ODBC queries, and they do not always work correctly when you actually issue the query using ODBC from Word, because of a Word problem to do with Unicode
fields in SQL Server. But you could probably still use MS Query to help you construct your SQL. (It's probably easier to do that in Excel, though).
Peter Jamieson

Import app from another server

Similar Messages

Maybe you are looking for