Import Bank Details qualifier table not getting mapped in vendor scenario

Hi All,
I am using MDM5.5 SP5.
Trying to import the IDoc CREMDM04 from ECC 5.0 to MDM.
Using the note 830864 i have copied all the reference data to MDM using the xml that was generated by the program referred in the note..
But Bank details is missing in this reference data. If i try to use the map 99 for bank details i get the error msg "The map cannot be loaded because the table "Bank details" is not a source".
How do I get the bank reference data into MDM .
If I skip this step and i try to import the xml file of CREMDM04 (generated through XI). And then if i use the map 99 i get the same error.
If i use the map CREMDM04 I get the error "The map cannot be loaded because the table "E1LFA1M" is not a source".
Please help!
Thanks a lot!
Jyotika

HI Jyotika,
This usually happens when you have a lookup table which has more than one display field. You get this error because you have to create an Compound field, which might not be set in the map. In order to create a Compound filed just check wether all the individual fields in the destinations field BankDetails<X,Y,Z>(X,Y,Z are individually mapped) then just right click in any portion on the source fields and select compound filed's, it creates a Bank details field and automatically maps it to the destination fields. Some times it also maps the values; if not you got to manually map it.
I you have any problem please let me know.
Regards,
CHARAN

Similar Messages

Import Server - Multiple Qualified Table - Map Crash

Hello,
Requirement: I need to update multiple qualified table using single source file.
Preparation: I have created a map where mapping to multiple qualified table fields maually.
Have created a Inbound Port using the above map.
Problem: Import server throws an exception; while opening the Import Manager using the Port Option and corresponding Exception; Lot of fields were un-mapped. Looks like Import map crashed.
Please feel free to throw some light reg the same!
Thanks
Alexander

Hi Alexander,
If you are performing multiple qualifier table mapping and importing then you will hav eto create differnt map for each table importing.In that case you will rrquire multiple inbound ports and in each ports deatils you will give the map name pertaining to which qualified lookup table you wish to import.
Actually using automatic importing for lookups is not desirable as the lookups always need to be prepopulated before your main table importing.
The exception taht you are receiving could be due to the reason that the map you are saving is using only one table mapping and so most of the fields are left unmapped.
try not to use automatic importing for Lookup qualifier tables and use manual importing and see if the the exception still comes.
Hope it helps
Kindly reaward points if found useful
Thanks
Simona

Clearing details i could not getting at BSIS & BSAS table. after Payment

Hi All,
I posted one invoice document through MIRO like below
Itm PK BusA Acct no.   Description                    Tx         Amount in   INR
001 31 1000 102961     DRUCK INDIA PVT. LTD. SC            479,777.20-
002 86 1000 350101     GR-IR-Account                 SC            427,000.00
003 40          300816     Service Tax 1 Cess           SC             51,240.00
004 40          300817     CESS 1                           SC              1,024.80
005 40          300817     CESS 1                           SC                512.40
payment to vendor also done through F110.
Itm PK BusA Acct no.   Description                    T x     Amount in   INR
001 25 1000 102961     DRUCK INDIA PVT. LTD.                        479,777.20
002 50           140904     ABN Amro Payments                             479,777.20-
now problem is Clearing details i could not getting at BSIS & BSAS table.
but iam getting clearing details at BSEG table. what is the problem . plse give help & solution. it is very urgant.if u have any doubts plse ask me.
Advance Thanks
Raj

Dear sridhar/ all
vendor side is all tables updated. it is ok. but i want detals about BSAS & BSIS.
because iam working on service tax creidit configuration. in BSEG table it is showing cleared. but in BSAS & BSIS tables not showing as a cleared item. what is the reason . plse give solution/ help.
Raj

Bank Detail IT(0009) not maintained

Hi,
I am facing one problem from client side. A new joinee joined on 01.11.2009 but his bank details IT are not maintained. After running 5 months payroll they detected a person is getting 17,000 but his salary is only 4,000.
When they told me about this problem I detected this is due to non maintainance of IT 0009.
Now they had already run the payroll for five months so what will be solution to recify this error.

Hi,
Make necessary entries and do retro-calculation.
Obviously the employee's salary will not cover delta, so employer has to ask him return extra payments.
Cheers

Error: Imported bank file format does not correspond to selected format

Hi All,
I am trying to execute FF.5 transaction - Import Electronic Bank Statement - for brazilian bank (Banco do Brasil) but I got an error message no. 8B795 (Imported bank file format does not correspond to selected format), I tried format B (Cobrança/pagar itau) and 1 (Cobrança/pagar bradesco).
The file that I am trying to upload has 400 positions.
Does anyone know which format I should to use?
Regards,
Daniel

Hello,
In my case our bank was sending us a file using the version 085, while we were waiting for one of those: 030, 040, 050, 084 or 087.
Now they will send these files using the version 087.
Thank you!
Caio.

Profit Center is not getting captured in Vendor line item from MIRO.

Dear Friends,
Profit Center is not getting captured in Vendor Line Items from MIRO Transaction for some New Business Users, where as for Old Users profit center is getting generated at Vendor Line Item.
We have provided the same authorization of old Users to new business users. (i.e. New user is a copy of old user)
Please help us how we can the get Profit Center in all transactions will be processed by New Business users.
I think we need to maintain user based authorization to get the Profit center in vendor Line items processed from T.Code:MIRO in SAP.
Looking forward for your kind cooperation in this matter
Thanks & Regards,
Naveen Kumar.

Hello Naveen,
I am not very sure about your query, as you might be knowing that the Profit Center is only updated in New GL tables (FAGLFLEXA, FAGLFLEXT) and hence the Vendor relavant tables would not.
The profit center information in the split lines or the line of the 'General Ledger View' are only displayed within transaction FAGLL03 which read the 'new' table for the NewG/L.
About profit center wise reporting, when New GL is active Please review attached consulting SAP note:
- 826357 Profit Center Accounting and new general ledger in
I hope this helps. If not, please provide an example of your requirement.
Thanks and regards,
Suresh Jayanthi.

Master table, detail table, detail table not getting refreshed selection

i have a page where i am displaying data as master table and detail table. both table VOs are based on SQL queries which use bind variables.
i have a view link between vos of type 1:M
i created master table detail table page by dropping detail iterator from data control panel under master and selecting master table detail table
on my page i see detail table records getting populated only for first record of parent table.
on changing parent record, child table shows same records and does not refresh
i am using partial triggers on both tables to be populated on a button click as i need to pass some bind variables to VOs which are taken as input from users
how can i show corresponding rows in detail table when parent record in table changes
will i have to use table selection listener
is it possible declaratively to have master detail table view when both VOs have bind variables
jdev 11 1 1 5

these are the SQLs used
Parent SQL Based VO Query
SELECT to_char(d.status_date,'yyyymmddhh24') TIME123, count(DISTINCT d.c4)
FROM t1 d,
t2 w
WHERE w.c1 = nvl(:ou, w.c1)
AND UPPER(w.c2) = UPPER(nvl(:tt, w.c2))
AND d.c3 >= :startTime AND :startTime IS NOT NULL
AND d.c3 <= :endTime AND :endTime IS NOT NULL
AND d.c4 = w.c4
AND UPPER(d.status) = 'CLOSED'
GROUP BY to_char(status_date,'yyyymmddhh24') ORDER BY to_char(status_date,'yyyymmddhh24') DESC
Child SQL Based VO Query
SELECT w.c1,
w.c5 - w.c6 processing_time,
w.c3,
w.c6,
w.c7,
w.c8,
to_char(d.status_date,'yyyymmddhh24') TIME123 FROM t1 d,
t2 w
WHERE w.c2 = nvl(:ou, w.c2)
AND UPPER(w.c3) = UPPER(nvl(:tt, w.c3))
AND d.c4 >= :startTime AND :startTime IS NOT NULL
AND d.c4 <= :endTime AND :endTime IS NOT NULL
AND d.c1 = w.c1
AND UPPER(d.status) = 'CLOSED' ORDER BY to_char(status_date,'yyyymmddhh24') DESC
view link is based on column TIME123

Custom field in BP_PDBGP table not getting updated

Hi,
i am working in Contract management in SRM 7.0 Pack 6. I have aadded a custom field in partner table which appears in the partner table of contract header. It is a checkbox. when i check it the value gets saved in BBPPDBGP table for the first time after that if i try to uncheck it the value is not getting updated. I checked in the BBP_DOC_CHANGE_BADI, the value which is getting passed is correct but it doesn't update the databse accordingly.
Any suggestions? is this a standard bug?
Neha

Hi Virendra,
Thanks a lot for your suggestion.
Where should i check? If the data passing to BBP_DOC_CHANGE_BADI is correct then that means at the webdynpro side there should not be any problem and as per the standard after doc_change also it should save properly. i also checked the badi there is not dependent coding done over there. DOC_SAVE badi is also inactive for contract business object. Hence, i am not getting any clue where could be the problem.
Let me know if you want more details inorder to analyse this problem.
Thanks &Regards,
Neha

Error in Proxy- Table not getting updated

Hi,
This is an Interface between Oracle and SAP SRM. The Middleware used is
SAP XI.XI is fetching the data based on the SQL condition in the JDBC Adapter. The SAP XI JDBC Adapter picks up the
data with a poll interval of 600 seconds and do the required mapping
transformation in SAP XI and it gives XML to SAP SRM. The
receiver XI Adapter used is XI Adapter since there is a Inbound Proxy
program in the SRM system which when receives the XML from SAP X,
updates table . The data which is getting updated is of Bid
Invitation in SRM. I am able to see xml messages in SXMB_MONI in SRM system. But data is not getting updated in the tables.Any idea why this happening.
Thanks

have you created the sales order through BDC .... or manually ....check first ...
if it is through BDC ...then error in the Program ...
if it is throught Manual check with function People in SD they would have defined in the Customisation upto 130 lines of Line item ...
orelse the patch should be applied ...
if you ask anydoubt in this message ....please mention your sap version which you are working ...
Girish

C$sync_history table not getting updated

I am doing file based sync using the oracle APIs. While syncing there is no entry in the table showing Sync happened. but C$SYNC_LOG table is getting updated.
Can anybody tell whats the issue.
Thanks and Regards
Lijo Lawrance

Something additionaly. If the removeSession throws exception, or does not work as expected, the only way to continue is to extend the HeliosSession Class, and add to history by yourself.
The code for extending the HeliosSession is listed above.
The only thing you need is to call
((HeliosSessionExtended)localHeliosSession).addToSyncHistory(this); //this is the FDSession, or the new one used in constrctor of HeliosSession, or in the createSession Method from syncService)
afert startSession completes successfully.
import java.sql.Connection;
import java.sql.PreparedStatement;
import java.sql.SQLException;
import java.sql.Timestamp;
import java.util.Iterator;
import java.util.LinkedList;
import oracle.lite.sync.HeliosSession;
import oracle.lite.sync.HeliosTransport;
import oracle.lite.sync.SiteDef;
import oracle.lite.sync.Subscription;
import oracle.lite.sync.SyncPubItemStatus;
public class HeliosSessionExtended extends HeliosSession {
public HeliosSessionExtended(HeliosTransport paramHeliosTransport) throws Throwable {
super(paramHeliosTransport);
//override the addToSyncHistory method
void addToSyncHistory(Connection paramConnection) {
//what I said about Sync_history
if (!SiteDef.SYNC_HISTORY) {
return;
Long SessionId = this.getSessionId();
Long DeviceSessionId = this.getDeviceSessionId();
String clientId = this.getClientId();
String memberId = this.getMemberId();
String devicePlatform = this.getDevicePlatform();
int result = this.getResult();
String localHeliosMessage = this.getMessage();
long startTime = this.getStartTimeMs();
long finishTime = this.getFinishTimeMs();
long uploadStartTime = this.getUploadStartTimeMs();
long uploadFinishTime = this.getUploadFinishTimeMs();
int recordCount = this.getUploadRecordCount();
long uploadedByteCount = this.getUploadByteCount();
long compressedByteCount = this.getUploadCompressedByteCount();
LinkedList uploadedPubItems = this.getUploadPubItems();
int uploadPubItemsSize = 0;
if (uploadedPubItems != null) {
uploadPubItemsSize = uploadedPubItems.size();
long downloadStartTime = this.getDownloadStartTimeMs();
long downloadFinishTime = this.getDownloadFinishTimeMs();
int downloadRecordTime = this.getDownloadRecordCount();
long downloadedByteCount = this.getDownloadByteCount();
long downloadedCompressedByteCount = this.getDownloadCompressedByteCount();
LinkedList downloadedPublicationItems = this.getDownloadPubItems();
int downloadPubItemsSize = 0;
if (downloadedPublicationItems != null) {
downloadPubItemsSize = downloadedPublicationItems.size();
int completeRefItemsCount = this.getCompleteRefreshItemCount();
PreparedStatement preparedStatement = null;
try {
String insertString = "INSERT INTO C$SYNC_HISTORY (SESSION_ID,CLIENT_ID,DEVICE_PLATFORM,RESULT,START_TIME,FINISH_TIME,UPLOAD_START_TIME,UPLOAD_FINISH_TIME,UPLOAD_RECORD_COUNT,UPLOAD_BYTE_COUNT,UPLOAD_COMPRESSED_BYTE_COUNT,DOWNLOAD_START_TIME,DOWNLOAD_FINISH_TIME,DOWNLOAD_RECORD_COUNT,DOWNLOAD_BYTE_COUNT,DOWNLOAD_COMPRESSED_BYTE_COUNT,COMPLETE_REFRESH_ITEM_COUNT,DEVICE_SESSION_ID,UPLOAD_PUB_ITEM_COUNT,DOWNLOAD_PUB_ITEM_COUNT,MEMBER_CLIENT_ID) VALUES (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)";
preparedStatement = paramConnection.prepareStatement(insertString);
preparedStatement.setLong(1, SessionId.longValue());
if ((clientId != null) && (clientId.length() > 0)) {
SetStringParameter(preparedStatement, 2, clientId);
} else {
SetStringParameter(preparedStatement, 2, " ");
if ((devicePlatform != null) && (devicePlatform.length() > 0)) {
SetStringParameter(preparedStatement, 3, devicePlatform);
} else {
SetStringParameter(preparedStatement, 3, " ");
if (result == 0) {
preparedStatement.setString(4, "SUCCESS");
} else if (result == 1) {
preparedStatement.setString(4, "FAILURE");
} else if (result == -1) {
preparedStatement.setString(4, "UNKNOWN");
} else {
preparedStatement.setNull(4, 12);
SetTimeParameter(preparedStatement, 5, startTime);
SetTimeParameter(preparedStatement, 6, finishTime);
SetTimeParameter(preparedStatement, 7, uploadStartTime);
SetTimeParameter(preparedStatement, 8, uploadFinishTime);
preparedStatement.setInt(9, recordCount);
preparedStatement.setLong(10, uploadedByteCount);
preparedStatement.setLong(11, compressedByteCount);
SetTimeParameter(preparedStatement, 12, downloadStartTime);
SetTimeParameter(preparedStatement, 13, downloadFinishTime);
preparedStatement.setInt(14, downloadRecordTime);
preparedStatement.setLong(15, downloadedByteCount);
preparedStatement.setLong(16, downloadedCompressedByteCount);
preparedStatement.setInt(17, completeRefItemsCount);
if (DeviceSessionId != null) {
preparedStatement.setLong(18, DeviceSessionId.longValue());
} else {
preparedStatement.setNull(18, 2);
preparedStatement.setInt(19, uploadPubItemsSize);
preparedStatement.setInt(20, downloadPubItemsSize);
if (memberId != null) {
preparedStatement.setString(21, memberId);
} else {
preparedStatement.setNull(21, 12);
preparedStatement.executeUpdate();
preparedStatement.close();
preparedStatement = null;
Object localObjcClob;
if (localHeliosMessage != null) {
localObjcClob = new Long[]{SessionId};
Subscription.setCLOB(paramConnection, "C$SYNC_HISTORY", "MESSAGE", localHeliosMessage, "SESSION_ID=? ", (Object[]) localObjcClob);
if (((uploadedPubItems != null) && (uploadedPubItems.size() > 0)) || ((downloadedPublicationItems != null) && (downloadedPublicationItems.size() > 0))) {
insertString = "INSERT INTO C$SYNC_HIS_PUB_ITEMS (SESSION_ID,PHASE,PUBLICATION,PUB_ITEM,DEVICE_TABLE,START_TIME,FINISH_TIME,IS_COMPLETE_REFRESH,RECORD_COUNT,BYTE_COUNT,COMPRESSED_BYTE_COUNT,MESSAGE) VALUES (?,?,?,?,?,?,?,?,?,?,?,?)";
preparedStatement = paramConnection.prepareStatement(insertString);
preparedStatement.setLong(1, SessionId.longValue());
SyncPubItemStatus localSyncPubItemStatus;
if ((uploadedPubItems != null) && (uploadedPubItems.size() > 0)) {
preparedStatement.setString(2, "UPLOAD");
localObjcClob = uploadedPubItems.iterator();
while (((Iterator) localObjcClob).hasNext()) {
localSyncPubItemStatus = (SyncPubItemStatus) ((Iterator) localObjcClob).next();
SetStringParameter(preparedStatement, 3, localSyncPubItemStatus.publication);
SetStringParameter(preparedStatement, 4, localSyncPubItemStatus.pubItem);
SetStringParameter(preparedStatement, 5, localSyncPubItemStatus.deviceTable);
SetTimeParameter(preparedStatement, 6, localSyncPubItemStatus.startTimeMs);
SetTimeParameter(preparedStatement, 7, localSyncPubItemStatus.finishTimeMs);
if (localSyncPubItemStatus.isCompleteRefresh) {
preparedStatement.setString(8, "YES");
} else {
preparedStatement.setString(8, "NO");
preparedStatement.setInt(9, localSyncPubItemStatus.recordCount);
preparedStatement.setLong(10, localSyncPubItemStatus.byteCount);
preparedStatement.setLong(11, localSyncPubItemStatus.compressedByteCount);
SetStringParameter(preparedStatement, 12, localSyncPubItemStatus.message);
preparedStatement.executeUpdate();
if ((downloadedPublicationItems != null) && (downloadedPublicationItems.size() > 0)) {
preparedStatement.setString(2, "DOWNLOAD");
localObjcClob = downloadedPublicationItems.iterator();
while (((Iterator) localObjcClob).hasNext()) {
localSyncPubItemStatus = (SyncPubItemStatus) ((Iterator) localObjcClob).next();
SetStringParameter(preparedStatement, 3, localSyncPubItemStatus.publication);
SetStringParameter(preparedStatement, 4, localSyncPubItemStatus.pubItem);
SetStringParameter(preparedStatement, 5, localSyncPubItemStatus.deviceTable);
SetTimeParameter(preparedStatement, 6, localSyncPubItemStatus.startTimeMs);
SetTimeParameter(preparedStatement, 7, localSyncPubItemStatus.finishTimeMs);
if (localSyncPubItemStatus.isCompleteRefresh) {
preparedStatement.setString(8, "YES");
} else {
preparedStatement.setString(8, "NO");
preparedStatement.setInt(9, localSyncPubItemStatus.recordCount);
preparedStatement.setLong(10, localSyncPubItemStatus.byteCount);
preparedStatement.setLong(11, localSyncPubItemStatus.compressedByteCount);
SetStringParameter(preparedStatement, 12, localSyncPubItemStatus.message);
preparedStatement.executeUpdate();
if (preparedStatement != null) {
preparedStatement.close();
preparedStatement = null;
} catch (Throwable localThrowable) {
//some error logging
} finally {
try {
if (preparedStatement != null) {
preparedStatement.close();
preparedStatement = null;
} catch (SQLException localSQLException2) {
//some sqlexception logging
void SetStringParameter(PreparedStatement paramPreparedStatement, int paramInt, String paramString)
throws SQLException {
if (paramString != null) {
paramPreparedStatement.setString(paramInt, paramString);
} else {
paramPreparedStatement.setNull(paramInt, 12);
void SetTimeParameter(PreparedStatement paramPreparedStatement, int paramInt, long paramLong)
throws SQLException {
if (paramLong > 0L) {
paramPreparedStatement.setTimestamp(paramInt, new Timestamp(paramLong));
} else {
paramPreparedStatement.setNull(paramInt, 93);
Edited by: FlorinA on Jul 6, 2010 12:37 AM
Edited by: FlorinA on Jul 6, 2010 12:45 AM

Oracle Materialized view tables not getting refreshed automatically.

At Destination:--
CREATE MATERIALIZED VIEW PROG_MEDIA
TABLESPACE ONA_TS1
BUILD IMMEDIATE
REFRESH FAST with rowid
START WITH SYSDATE
NEXT SYSDATE+1/96
AS (select /*+ PARALLEL(a,6) */ * from PROG_MEDIA@onair a);
exec dbms_mview.refresh('PROG_MEDIA','C');
At Source:--
CREATE MATERIALIZED VIEW LOG ON ONAIR.PROG_MEDIA
TABLESPACE MVLOG
WITH ROWID;
Fired manually:--
13:00:43 SQL> exec dbms_mview.refresh('PROG_MEDIA','C');
PL/SQL procedure successfully completed.
At source:--
13:18:35 SQL> select PROG_MEDIA_ID,PROG_MEDIA_NAME from PROG_MEDIA where PROG_MEDIA_ID='102226';
PROG_MEDIA_ID
PROG_MEDIA_NAME
102226
test
At Destination:--
14:03:28 SQL> select PROG_MEDIA_ID,PROG_MEDIA_NAME from PROG_MEDIA where PROG_MEDIA_ID='102226';
PROG_MEDIA_ID PROG_MEDIA_NAME
102226 UTSAV-5-162077
JOB LOG_USER THIS_DATE LAST_DATE_TIME NEXT_DATE_TIME INTERVAL FAILURES WHAT
242 ONAIR 17-05-11 14:17:24 SYSDATE+1/96 7 dbms_refresh.refresh('"ONAIR"."PROG_MEDI
A"');
242 ONAIR 17-05-11 14:32:25 SYSDATE+1/96 8 dbms_refresh.refresh('"ONAIR"."PROG_MEDI
A"');
1> I have scheduled this refresh job for every 15mins, but its not getting executed. Also my job_queue_process is '20'. Whenever i execute it manually it get's refresh.
2> I can schedule a cron for the same for every 15mins but i really dont want to do it.
Kindly help me out.

Hi,
I have created MV_CAPABILITIES_TABLE & executed below commands:--
17:56:54 SQL> EXECUTE DBMS_MVIEW.EXPLAIN_MVIEW ('"ONAIR"."PROG_MEDIA"');
PL/SQL procedure successfully completed.
17:57:26 SQL> SELECT capability_name, possible, SUBSTR(related_text,1,8)
17:57:27 2 AS rel_text, SUBSTR(msgtxt,1,60) AS msgtxt
17:57:27 3 FROM MV_CAPABILITIES_TABLE
17:57:27 4 ORDER BY seq;
CAPABILITY_NAME P REL_TEXT MSGTXT
PCT N
PCT N
REFRESH_COMPLETE Y
REFRESH_COMPLETE Y
REFRESH_FAST Y
REFRESH_FAST Y
REWRITE N
REWRITE N
PCT_TABLE N PROG_MED relation is not a partitioned table
PCT_TABLE N PROG_MED relation is not a partitioned table
REFRESH_FAST_AFTER_INSERT Y
REFRESH_FAST_AFTER_INSERT Y
REFRESH_FAST_AFTER_ONETAB_DML Y
REFRESH_FAST_AFTER_ONETAB_DML Y
REFRESH_FAST_AFTER_ANY_DML Y
REFRESH_FAST_AFTER_ANY_DML Y
REFRESH_FAST_PCT N PCT is not possible on any of the detail tables in the mater
REFRESH_FAST_PCT N PCT is not possible on any of the detail tables in the mater
REWRITE_FULL_TEXT_MATCH N PROG_MED mv references a remote table or view in the FROM list
REWRITE_FULL_TEXT_MATCH N PROG_MED mv references a remote table or view in the FROM list
REWRITE_FULL_TEXT_MATCH N query rewrite is disabled on the materialized view
REWRITE_FULL_TEXT_MATCH N query rewrite is disabled on the materialized view
REWRITE_PARTIAL_TEXT_MATCH N materialized view cannot support any type of query rewrite
REWRITE_PARTIAL_TEXT_MATCH N materialized view cannot support any type of query rewrite
REWRITE_PARTIAL_TEXT_MATCH N query rewrite is disabled on the materialized view
REWRITE_PARTIAL_TEXT_MATCH N query rewrite is disabled on the materialized view
REWRITE_GENERAL N materialized view cannot support any type of query rewrite
REWRITE_GENERAL N materialized view cannot support any type of query rewrite
REWRITE_GENERAL N query rewrite is disabled on the materialized view
REWRITE_GENERAL N query rewrite is disabled on the materialized view
REWRITE_PCT N general rewrite is not possible or PCT is not possible on an
REWRITE_PCT N general rewrite is not possible or PCT is not possible on an
PCT_TABLE_REWRITE N PROG_MED relation is not a partitioned table
PCT_TABLE_REWRITE N PROG_MED relation is not a partitioned table
34 rows selected.
Elapsed: 00:00:00.09
What to be done next?
Also i fired the job manually by:--
17:38:02 SQL> set serveroutput on
17:39:45 SQL> EXEC DBMS_JOB.RUN(242);
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.48

I have changed bank details and do not have 3 digit security number. When trying to update bank details my security ? answers are not recognised.

I have changed my bank details and no longer have my 3 digit security number. I have tried to change my bank details but my security question answers are not recognised. What should I do?

All credit cards have a security number, on the back of the card. If you don't have your card, then you will not be able to enter in that credit card. This is a standard security precaution to keep someone who gets hold of your card number but not the card itself from being able to make charges to your account. You will need to contact your bank and get a replacement card.
As to your security questions, go to:
https://appleid.apple.com/
Click "Manage My Account", sign in, and go to the Password and Security section. Answer the security questions and you'll be taken to a screen where you can then change them. If you've forgotten your answers, there should be a link just under the security questions fields where you can have a reset email sent to your Rescue email address. If the link for the email doesn't appear, as can happen if you didn't set a rescue email address or (apparently) have a .Mac email address, see the user tip created by Kappy, another user here, on how to proceed:
https://discussions.apple.com/docs/DOC-4551
Regards.

ME22N: change of PO details in backend not getting replicated with SRM 7.0

Hi All,
We have created Purchase order using shopping cart in SRM 7.0 extended classic scenario. The PO created in SRM 7.0 is replicated into backend in ME21N using a Custom BDC program.
But when the Purchase order is changed in SRM 7.0 the data is not getting replicated. We are not allowed to change the PO details in backend using ME22N (No change in SRM Backend is allowed ), So we are not able to write a Custom BDC program for that. Hence the PO is not getting closed and throwing error.
Please suggest me an alternative.
Regards,
Lakshmi Narayana

Hi,
Being in Extended Classic Scenario, PO cannot be in change mode in R/3.
This is due to check done on PO status (fied STATUS from EKKO table).
When PO is created by SRM replication, its status is 'K' (Purchase Order from BBP). What you could do is to substitute this status with value 'I' (Purchase Order from BAPI) using BAdI BBP_ECS_PO_OUT_BADI.
In this way, R/3 PO can be modified in R/3.
Nevertheless, by doing this, you won't have your SRM PO output after modification(s) (as it is done in standard) because changes are in R/3.
To be able to get an R/3 PO output with ECS, see following note:
883693 - ECS: PO output determination in R/3.
Regards.
Laurent.

Importing .mov or .mpg and not getting audio in FCP

I have both an Mpeg (as well as an .mov ) file that play in QuickTime Player beautifully with audio. When I import it into FCP I only get the video. This has been happening with many files that clients are bringing in and have not figured out a way to get the audio track into Final Cut. Any suggestions? Why will it accept the video, but not the audio? Thank you for your assistance in advance!!
BR

Hi,
Mpeg is not an editing format.
You need to demux video and audio and convert the original Mpeg in a FCP friendly format like DV or QT.
Your solution is likely MPEGstreamclip. Here it is:
http://www.squared5.com/
It'll do what you need.
G.

BWFI_AEDAT table not getting updated - FI_GL_4 Delta

Hi Friends,
We have just started loading Delta loads using FI_GL_4.
The Changed records are getting updated correctly for all the documents into BWFI_AEDAT and loaded into BW except in cases of an Intercompany doc.
Is there a particular reason that changes to Intercompany Doc will not get updated in the table or is there a way to find out how this table gets populated so that I can debug this issue.
Any help is highly appreciated..
Ashish.

Hi,
How many days after INIT are you going for delta??
If there is entry in BWFI_AEDAT there is no reason why delta should not come.
check for newly created documents in BKPF using CPUDT to see if new documents have been created in this period too.
Regards,
Saurabh

Import Bank Details qualifier table not getting mapped in vendor scenario

Similar Messages

Maybe you are looking for