Import iDVD project into Quicktime

I love the effects from iDVD Themes 6 and 7. I would like to produce simple iDVD movies and then import them to Quicktime movies for online advertising. Anyone know how to do this?
Thanks
Earl

You can use QT Pro to open an iMovie and then export from there.
Also, I'm not 100% sure this will work but this too may be worth a shot:
By sdmacuser at 2007-10-26
By sdmacuser at 2007-10-26
Or .... you might be able to hint the above movie for use with QT Broadcaster for streaming over the internet from one mac to another (but for streaming to multiple macs you will likely need to have a server to reflect the hinted iMovie from).
If the above fails then try this app (however there will be some loss in quality):
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.products.htm
Good luck and keep us posted.

Similar Messages

Convert a whole iDVD project into quicktime movie

Is there a way to convert a whole iDVD project into a quicktime movie?

jcc31 wrote:
Is there a way to convert a whole iDVD project into a quicktime movie?
Yes, but slightly longwinded:
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
which is a mere $20.
Once it is iMovie you can export from there as a Quicktime movie.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.

Importing iDVD project into iMovie

I want to send a slide show from iDVD into iMovie. The show looks normal in quicktime but when I attempt to drag the .mov file into iMovie I get the message "Error during import. The file could not be imported: Unknown error". The procedure has worked fine in the past but now I've hit a brick wall. Help!

I finally found out why I was unable to import my iDVD file into iMovie. I am a new Mac owner and I had used an illegal punctuation mark in the title of my slide show (China/Japan). I received a useless message - "The file could not be imported: unknown error". Thank you very much. My old PC with Microsoft would have immediately told me to retitle the file and that would have been that. Mac's poor error warning caused me to stop my project for days because they could not even give me a simple reason for the error. My education continues. I love the iLife software but find it to be incredibly difficult because every day I run into unexpected problems. When finished the results are truly beautiful - if you have unlimited time. I am impressed with Apple's help forum.

Importing imovie project into Final Cut Pro

Hello I need help getting my HD imovie project into final cut pro. I recored the project in 24p and it's already imported into imovie. What is the best way to get it into Final Cut Pro so that I can edit it further without sacrificing the quality.
Another problem is that I have heard that imovie compresses the video and totally ruins the quality. Is this true? And is this reversible in any way? I have already recorded over all the clips for this project on my camcorder. How screwed am I?
-Michael

First thing to do is find your original clips that you captured in IMovie. I don't have much experience in IMovie, but see if you can select a clip and control click and choose reveal in finder. If that works, open one of these clips in quicktime player and hit command-i and let us know the format of the clip.
Kind of doubt you'll be able to actually import your project into fcp, but you should be able to recreate it in fcp without too much difficulty.
Let us know what camera you shot and captured from. That may be of some help.
Hopefully someone with more experience in IMovie will speak up, but hopefully this will get us started.
Message was edited by: Michael Grenadier

Importing web project into Workshop 9.2

Hi,
I'm trying to import an existing web project into Workshop 9.2.1 from my Subversion source. Unfortunately Workshop doesn't recognize this project as a valid web project.
I imported the code project using 'File>Import>Existing Projects' into Workspace.
Unfortunately, I get the following errors:
- "The library module reference : beehive-netui-1.0 is not allowed from the classpath of a non-web project, only JAR,EJB, and EAR module types are allowed."
- "The library module reference : jstl is not allowed from the classpath of a non-web project, only JAR,EJB, and EAR module types are allowed."
How do I tell Workshop that this project is indeed a web project?
Does anyone have any suggestions?
Thanks,
Derrek

Wow.... I figured out a workaround (aka Ugly Hack). It seems that Workshop doesn't properly import Portlet projects. Here's how I got around it:
1. Checkout the code from Subversion
d:\MyProjects\Project\trunk\MyComponent\
2. Move MyComponent to a temp directory
d:\MyProjects\Project\trunk\MyComponent\ --> d:\tmp\MyComponent
3. Open Workshop and create a new Portal project and PortalEAR project of the same name as the MyComponent projects
File>New myComponentPortal
4. Copy over the src and WebContent directories in the SVN directory with the files from tmp.
d:\tmp\MyComponent\src -> d:\MyProjects\Project\trunk\MyComponent\src
d:\tmp\MyComponent\src\WebContent -> d:\MyProjects\Project\trunk\MyComponent\WebContent
5. Refresh Workshop and let the spooky voodoo happen. Viola! Now I've got a running portal project with a SVN connection.

Error while importing MS project into cProject

Hi
I am getting the below error while importing MS project client file or XML file into cProjects.
dpr_shared087
Logon language becomes original language
Message no. DPR_SHARED087
Diagnosis
The logon language is defined as a possible text language in Customizing for Collaboration Projects under Specify Text Languages. Therefore, it is valid.
System Response
The logon language becomes the original language of the new object that was created.
Kindly suggest what configuration data if any is missing.
Regards
Srikrishna

Hi
I am getting the below error while importing MS project into cProject.
Error occurred when importing from Microsoft Project
Message no. DPR_UI_BSP116
Diagnosis
When a project is imported from Microsoft Project, the system generates an XML string during internal processing. A project is then created in cProjects from this string.
The XML string contains errors because the values from Microsoft Project were transferred without verification.
Procedure for System Administration
Notify SAP or call the cProjects application with the "DebugMode=X" query string and carry out the import again.
The XML string that was generated temporarily is then validated against the cProjects XML schema. The error message from the XML parser is then displayed in the popup.
Kindly suggest, if the below steps for importing MS project is ok or not?
step 1: Create project in MS project with tasks.
step 2: Maintain maping fields of MSP in cProject configurat
step 3: Import MPP file into cProject using "Import" button.
step 4: I am getting the above error while importing the MPP file.
Regards
Srikrishna

How to import existing projects into JDeveloper 11g

I am trying to work with JDeveloper for my application and want to know whether it is possible to import existing projects into the work space in JDeveloper. I am currently working with eclipse IDE and this feature is available in it. How can I connect to clear case from JDeveloper? In eclipse it is very easy to connect to clear case with a plugin installed and check out, check in files from the source control. Any help is greatly appreciated.

The basic way to import code is to use the "New->Projects->Project from existing code" or "project from WAR" dialogs to create your project.
You then need to do some tweaking in the project properties->Content (and sub nodes such as resources and Web content).
And also set the correct JARs/Libraries in the project properties.
You can use the help->check for update to download the extension to JDeveloper that will let you integrate with Clearcase to do version management.
This how-to might help you with your migration:
http://www.oracle.com/technology/products/jdev/howtos/1013/w4wljdev/workshopandjdev.html

Problem with importing premiere project into after effects

Hi. When I import premiere project into after effects CS4 the files I speed up 2x (for example) look likes on the snapshot below, and they are not in the correct places.
what can I do?

Then don't speed them up... This is "as designed". AE and Premiere are not compatible in their tiem-remapping/ time-stretching, so tehre is no way to move between them without losing that info.
Mylenium

How to import maven projects into jdev

Hi.
i have maven project created in other than jdev IDE.i am trying to import maven project into jdev.
i configured maven in jdeveloper 11.1.1.4 with help manu check for updates.
i am follwoing the [how to import maven project into jdev|http://www.oracle.com/technetwork/developer-tools/jdev/maven11g-090173.html#4]
after updating my jdev with maven extensions,i could not see maven project in file|import project menu.
why maven project is not appearing in jdev 11.1.1.4. file|import project menu ?
please help appriciate your help

Though it's not clear in that link, I believe those instructions to be for JDev 11.1.2.1.0, not 11.1.1.4.0. However somebody may correct me.
CM.

Can i import Jdeveloper project into Eclipse 4.7 juno????please help me.

can i import Jdeveloper project into Eclipse 4.7 juno????please help me.
when i tried this it is giving some errors in project ie mismatching in configurations....!so i want soln please .

Hi,
first recommendation is to not use Eclipse natively but use OEPE that ships with Eclispse Juno. This way you have the IDE prepared for ADF projects. However, still the JDeveloper workspace structure does not fit the Eclipse structure.
Frank

HT4007 I have multiple libraries. I would like to import one project into another library. How?

I have multiple libraries. I would like to import one project into another library. How?

Select the project in the Library Inspector and export the project as library. Then import this library into your other Aperture library.
File > Export > Project as New Library
File > Import > Library
Regards
Léonie

Trouble Importing Motion Projects into DVD Studio

I’m in the process of creating a Demo DVD and I was looking to use Motion to create menus and transitions in DVD Studio Pro. Every time I try to import a project I get an “Incompatible Format” error. My roommate’s iMac G5 imports Motion projects with no problems. I called Applecare to get help and was told Motion was bad and to reinstall it. I did and it didn’t work. (It was also suggested that my video card might not be good enough. Doesn’t make sense though because my roommate’s iMac does the trick.) I called back like I was told and was informed by another guy that I don’t have support available to me because the complimentary phone support expired last year. What is the world is wrong? Does anyone have any suggestions? I’m game for a complete hard drive wipe if it’ll fix the problem? My specs are below. Here are the specs of my roommate's computer:
Processor: 2.1 GHz PowerPC G5
RAM: 1.5 GB DDR2 SDRAM
Video Card: ATI Radeon X600 XT, 128 VRAM
Software: Final Cut Studio Academic
Please help me!!
~Thanks

One more thing, I tried opening up my project no DVDSP on my roommate's computer and it worked. His own project worked too. I brought the same files over to my computer (I opened the files both time off my thumbdrive, so they're the same files, not copies) and I got the same "Incompatable Format" error.
I also cannot import Motion projects into FCP either, but both my roommates can.
~Jeff

Turn idvd project into movie for youtube

How do you turn idvd project into movie for youtube

if what you are seeking is simply adding the dvd presentation as a QT movie (no buttons or menus from iDvd) then look into DVDXDV > iMovie or iDVD.
http://www.dvdxdv.com/
Message was edited by: SDMacuser

How can I import VLC files into quicktime?

I'd like to be able to import some files into Quicktime from VLC. Thanks. David

MPEG Streamclip and the MPEG-2 Playback Component should work to demultiplex and convert VOB files. The Help menu in MPEG Streamclip should have complete instructions. You could also look into DVDxDV or Cinematize.

How do import an iDVD project into iMovie?

Hello,
I want to make changes to a movie, but I can't find the movie. It's just me. I have the iDVD project, and I know I can "play a DVD into iMovie, but wouldn't it be better to get the .proj into the event?
Thank you.

First, see if your MP4 file will play in QuickTime Player.
If it will, click Command-I in QuickTime Player to open the Inspector. Tell us the dimensions of the clip, and everything listed beside the word Format:

Import iDVD project into Quicktime

Similar Messages

Maybe you are looking for