Import MXF (P2) using XML

I have hand-coded an XML document to use when importing clips.
When the target clip is a .mov file, it works just fine.
However, when the target clip is an MXF file, it creates a clip in the bin, and properly names it, but it fails to connect to the video file.
I have pored over Apple's developer documentation, but I can find no way to tell Final Cut that it is dealing with an MXF video file and, therefore, must use its "Import P2" function.
Has anyone been able to automate P2 (or any other MXF) import using XML?
G5 Dual 2GHz Mac OS X (10.4.8) 2.5GB RAM

I have hand-coded an XML document to use when
importing clips.
When the target clip is a .mov file, it works
just fine.
However, when the target clip is an MXF file,
it creates a clip in the bin, and properly names it,
but it fails to connect to the video file.
I have pored over Apple's developer documentation,
but I can find no way to tell Final Cut that it is
dealing with an MXF video file and, therefore, must
use its "Import P2" function.
Has anyone been able to automate P2 (or any other
MXF) import using XML?
G5 Dual 2GHz Mac
OS X (10.4.8) 2.5GB RAM
P2 Log by Imagine Software will do this. I use it for review, logging & XML import to FCP.
Kind Regards,
Charles
PowerBook 17", PowerMac DP-2GHz & Quad Core 2.5 Mac OS X (10.4.3)

Similar Messages

How to edit bitmap which is imported in flash using xml and save the edited bitmap back to xml in flash.

hi all
It would be appreciated if any one let me know how to edit
bitmap which is imported in flash using xml and save the edited
bitmap back to xml in flash.
Is it posible to save the bitmap data in flash?
thanks in advance

Yes you can... but like I said before you need to upload the
data from the changes you make to a server.
In terms of the solution... its unlikely that you'll find one
specifically for your needs. You will have to learn whatever you
don't know how already and maybe adapt some existing examples to
your needs.
To change the visual state of a movie clip... you just do all
the regular things that you want to do to it using flash... scale,
rotation, drawing API , textfields etc in actionscript. If you
don't know how to how to do that stuff, then you need to learn that
first. That's basic actionscript.
You can capture the visual state of a movieclip using the
BitmapData class. That includes a loaded jpeg. You can also
manipulate bimatp data using the same class. You should read up on
that if you don't know how to use it or check out the examples
below for uploading info.
For uploading to the server:
Here's an as2 solution that took 15 secs to find using
google:
http://www.quasimondo.com/archives/000645.php
If you're using as3, google search for "jpeg encoder as3" and
look through that info. There are also historical answers in the
forums here related to this type of thing that might help as
well.

OIA - Importing nested entitlements using XML file

Hi,
I am looking for some information on importing nested entitlements (like RACF information) into OIA. From what I gather sofar, looks like I have to use XML to import nested entitlements. But sofar, I have no luck finding any documentation on how to go about it.
If anybody has any information that you can share, that would be great.
Thank you
-Kamal

If you're saying that you have Reader 9 and Acrobat Pro 7 on the same machine, please be aware that this is not a recommended or supported configuration. Although it's possible, people have reported a number of problems with such a setup.
George

Smart export/import - unable to import project that uses 'xml' technology

Hello,
I have smart exported project and this project uses technology 'XML'. When I'm trying to import it, there are following issues (screen) - no fix available to choose:
http://screener.tk/f/o/f/z6nRM.png
So, it seems technology 'XML' is not recognized during import, because it has different ID. On repository I'm trying to import to, XML has ID 27999. So, I manually edited SmartExport.xml file and changed all occurences of 1189 to correct ID: 27999 and tried again to import. After this change, there are no issues. But just after I start import, following error message is thrown and import fails:
http://screener.tk/f/o/f/wf8R0.png
The same issue when I'm trying to import any project that uses any not built-in technology. After importing technology on destination server, ID doesn't match. And if I change ID in SmartExport.xml, no issues but import fails due to error similar as above.
So, what is the correct way to perform succesfull import/export in this cases and how to fix "dirrerent origin" errors? Do you have any idea?

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

Using HTTPService to import data from a XML file

Hello there!
I'm having some problem's with this import... If anyone can
help, I would appreciate it!
I'm using this type of information as data source:
public var dataCollection:ArrayCollection =
new ArrayCollection([
{ id: "P1", name: "Porto", type: "team", children: [
{ id: "R1", name: "Dr Silva", location: "Bloco 1", type:
"member" },
{ id: "R2", name: "Dra Neto", location: "Gabinete", type:
"member"
{ id: "P2", name: "Braga", type: "team", children: [
{ id: "R3", name: "Dr Santos", location: "Bloco 2", type:
"member" },
{ id: "R4", name: "Dra Sonia", location: "Piso 1", type:
"member"
But I want to import it from a XML file like this:
<?xml version="1.0" encoding="utf-8"?>
<items>
<item id="P1" name="Porto" type="team">
<children id="R1" name="Dr Silva" location="Bloco 1"
type="member" />
<children id="R2" name="Dra Neto" location="Gabinete"
type="member" />
</item>
<item id="P2" name="Braga" type="team">
<children id="R3" name="Dr Santos" location="Bloco 2"
type="member" />
<children id="R4" name="Dra Sonia" location="Piso 1"
type="member" />
</item>
</items>
I already import the file, but can not translate the data
into a array collection.
private function initApp():void {
var httpService:HTTPService = new HTTPService();
httpService.url = "dataprovider.xml";
httpService.resultFormat = "e4x";
httpService.addEventListener(FaultEvent.FAULT,
onFaultHttpService);
httpService.addEventListener(ResultEvent.RESULT,
onResultHttpService);
httpService.send();
private function onFaultHttpService(e:FaultEvent):void
Alert.show("Error reading data file.");
private function onResultHttpService(e:ResultEvent):void
//Convert the xml data to a array collection
Thank you

Hello Peter, and thank you for your reply's.
My problem is that I'm receiving the data from the external
file and I don't know how to get the children in place... I mean, I
also have some data being received form a file that I can convert
into an array collection, but the thing is, that file doesn't have
children structure...
It's something like this:
<?xml version="1.0" encoding="utf-8"?>
<items>
<item id="T1" resourceId="R1" name="Cardiologia"
startTime="25-3-09 8:0:0" endTime="25-3-09 8:30:0" />
<item id="T2" resourceId="R2" name="Raio-X"
startTime="25-3-09 9:0:0" endTime="25-3-09 9:15:0" />
<item id="T3" resourceId="R3" name="Analises"
startTime="25-3-09 12:0:0" endTime="25-3-09 12:45:0" />
<item id="T4" resourceId="R4" name="Consulta"
startTime="26-3-09 8:0:0" endTime="26-3-09 9:0:0" />
</items>
And I solve it with this (don't know if is the best):
private function onResultHttpServiceTask(e:ResultEvent):void
var a:Array = xmlListToObjectArray(e.result.item);
tasks = new ArrayCollection(a);
protected function
xmlListToObjectArray(xmlList:XMLList):Array
var a:Array = new Array();
for each(var xml:XML in xmlList)
var attributes:XMLList = xml.attributes();
var o:Object = new Object();
for each (var attribute:XML in attributes)
var nodeName:String = attribute.name().toString();
var value:*;
value = attribute.toString();
o[nodeName] = value;
a.push(new ObjectProxy(o));
return a;
But when the children "enter in action" I don't know how to
bring them to the array...
This code you send it's preaty much the thing I need, but the
thing is that I don't know how to call the children with data as
e:ResultEvent...
If you can help a bit more, I would really appreciate...
Thank You

Import of XML file failed in portal using XML Content and Action

Hi Friends,
I am trying to import the simple XML file which is just creating the folder in the PORTAL_CONTENT using XML CONTENT AND ACTIONS which is one way of creating the portal content. GO TO SYSTEM ADMINISTRATION > TRANSPORT > XML CONTENT AND ACTIONS > IMPORT.
The reason for using this import tool is to upload the backend Business roles, which is not not working on our corporate portal. To test the import functionality I used the following xml file (I got this XML file by exporting the test folder in the portal using the same tool)
<GenericCreator author="XML Creator" version="XML Automatic Creation" mode="clean,execute" report.level="success" createMode="1" default.locale="en" ignore="false">
<Context name="portal_content" objectClass="com.sap.portal.pcd.gl.GlContext"></Context>     <Property name="parent1" value="pcd:portal_content"/>
     <Context name="com.dri.fldr.im" objectClass="com.sap.portal.pcd.gl.GlContext" create_as="0" parent="$">
          <Attributes>
               <Attribute name="com.sap.portal.pcm.Description" type="text">
                    <AttributeValue value="" locale=""/>
                    <Attribute name="administration" type="string">
                         <AttributeValue value=""/>
                    </Attribute>
                    <Attribute name="Inheritance" type="string">
                         <AttributeValue value="NONFINAL"/>
                    </Attribute>
               </Attribute>
               <Attribute name="com.sap.portal.pcm.Title" type="text">
                    <AttributeValue value="test" locale=""/>
                    <AttributeValue value="test" locale="en"/>
                    <Attribute name="administration" type="string">
                         <AttributeValue value=""/>
                    </Attribute>
                    <Attribute name="mandatory" type="string">
                         <AttributeValue value="true"/>
                    </Attribute>
                    <Attribute name="Inheritance" type="string">
                         <AttributeValue value="NONFINAL"/>
                    </Attribute>
               </Attribute>
          </Attributes>
     </Context>
</GenericCreator>
SDN BLOCKED THE XML The above XML file works fine in other portal in the landscape but not in corporate portal ( which is freshly build recently).Following error message is display when i am trying to upload the file
Status Name Action Type Comment
General Extracting root node E:\usr\sap\EPD\JC00\j2ee\cluster\server0\%USERPROFILE%\AppData\Local\Temp\tmp_masscontent4135391959047431276.xml Failed to extract root node
General Extracting root node E:\usr\sap\EPD\JC00\j2ee\cluster\server0\%USERPROFILE%\AppData\Local\Temp\tmp_masscontent4135391959047431276.xml Parsing failed .
Dont know is there a service/ configurations needs to be done to enable this feature?.
Thanks
Edited by: hammad on Sep 4, 2009 5:48 PM
Edited by: hammad on Sep 4, 2009 5:49 PM

The problem statement is not very clear.
Try following this how to guide [https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/207a2141-c870-2910-e080-90c920b24f47&overridelayout=true|How-To]
Best Regards,
Prasanna K

Import a Workflow using an XML file in Tcode SWDD

Hello,
I have a problem in the workflow builder- Tcode SWDD:
I am trying to copy workflow from one system (ECC 5.0) to another one (ECC 6.0) ? I use transaction Workflow-> Import/export->Export to xml files and import the xml files again, but the new workflow is different from the original one. The steps do not have the same numbering and the Workflow graphic is far from being identical to the old one.
Could someone explain me the reason of this problem in detail and how it could be solved? It's really a big workflow and would need to avoid creating it manually.
Thank you very much for your help.
Best regards,
Sylvain

Hello,
The main problem that I had with the steps is that most names were not the same as the old Workflow. Instead of having the correct description I had some coding commands which created a bunch of errors when I tried to perform the syntax check.
I believe you are right. In the new system (ECC 6.0) I do not have the Business Engineering objects like the tasks "TS....". I will create them first and try the Workflow import again after.
I will let you know if it corrected the error or not.
Best regards,
Sylvain

Importing requisitions using XML...

We have an external system from which we need to import requisitions into Oracle. We would like to use XML. Is there a document describing the correct XML document format for Oracle?

Empty TOC as in the .xml that RoboHelp generated for me?
I found the .hhc file (silly me expecting to find a .xml ) which contains tagged content, so if I do the cut/paste into that in a text editor, it seems to reflect it in the project. Is that the file you mean?

How to handle error when importing taxonomy for product using XML?

We are on MDM 5.5 and built a repository for SAP R/3 Material Master. It has basic material information and taxonomy information as well. We built an import map based on an XML file, which includes basic info as well as taxonomy (classification) info. The import process runs smoothly. But if the import file includes some materials which characteristic values don't exist in MDM, the import will fail and exception file has a complete different format as our import file also it only display one material. Therefore, we cannot reprocess the exception file for errorred out items. What could we do wrong? By the way, we use "Create Pivot table" option in MDM to create the original import map.

Hi Micheal,
I Think your problem is similar to the below one,you can refer the below link for the same.
Import file using Pivot Tables
What you need to make sure is that you are using the same structure of the source file for importing as you used while creating the map else it wont work.
Your schema of the source file as well the schema used when creating the map must match.
You can refer the below links to know more about Taxonomy data importing:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30aa1447-80a1-2a10-e483-a76087bcb12f
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6090d0bd-1da7-2a10-468f-bdd17badb396
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8090941f-a5a7-2a10-3ba6-b4af5ec6d97b
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/308c62a2-5faa-2a10-fda6-fa4aa7169734
Hope It Helped
Thanks & Regards
Simona Pinto

Importing data- using xml file into HANA Table

Hi,
We are using (HDB STUDIO ) - revision 60.......
Is it possible to import data using XML file into HANA table (Master,Fact tables)?
(Without using any intermediate adapters for conversion of data.....)
Can any one suggest us........
Thank you.

Hi user450616
I am a bit confused about what you are trying to achieve.
Are you:
1. importing a CSV file into APEX
2. adding an extra column to the Oracle Table
3. populating the extra column with the CSV filename?
Let us know if this is what you are trying to do.
Cheers,
Patrick Cimolini

Using XML to import/export large datasets

Hi,
I have a large customer who is using serveral aplications which
exchange data. Now they use MQUE Series to put some data on the
line. Each external application has his own interface.
We would like to use one interface which uses XML and depending
on what is in de xml-document, writes it in different Oracle
databases.
On a daily bases there must be created 500.000 records in de
database, so performance is a hot issue.
What are the possibilities and needed configuration (Oracle
8...i) and how reliable it is going to be ?
Suppose we want to use as much as pl/sql as possible.
Thanks for any feedback,
Ed
[email protected]
null

Ed Somers (guest) wrote:
: Hi,
: I have a large customer who is using serveral aplications
which
: exchange data. Now they use MQUE Series to put some data on
the
: line. Each external application has his own interface.
: We would like to use one interface which uses XML and
depending
: on what is in de xml-document, writes it in different Oracle
: databases.
: On a daily bases there must be created 500.000 records in de
: database, so performance is a hot issue.
: What are the possibilities and needed configuration (Oracle
: 8...i) and how reliable it is going to be ?
: Suppose we want to use as much as pl/sql as possible.
: Thanks for any feedback,
: Ed
: [email protected]
You should check out the Oracle Integration Server which was
just announced at Openworld. It is ax XML Messaging Hub that
incorporates workflow and has an adapter SDK to connect to your
applications. It uses JMS as the envelope and XML as the payload.
Oracle XML Team
http://technet.oracle.com
Oracle Technology Network
null

Cannot import .mxf into PPCC2014, but can into CS6 on same laptop.......huh?

Just bought a new Asus laptop.
i7-4710HQ CPU @ 2.50GHz
16 GB ram
64 bit Operation
Nvidia Geforce GTX860m
I installed PPCC2014. I cannot import .mxf files from a Canon XF300. I CAN import them into CS6 on the same laptop.
I've been editing .mxf files on my desktop for years in PP, and for the last year on CC2014
I tried taking the .mxf file out of the folder, (which contains .cif, .xml and .sif file) and importing alone and it doesn't work.
The message I get is "unsupported or damaged file."
I've tried importing by dragging and by using import in premiere.
Anyone know what might be going on?
Thanks for your help.
Jessic

Hi,
I have come across this before. Seems Premiere Pro isn't properly activated. I would suggest the following steps:
Sign out from the Creative Cloud app and Quit it (Quit option will be available after a few seconds).
Now move the following folders to desktop:
1) SLCache
Windows: OS Drive\Program Files (x86)\Common Files\Adobe
Mac: Library/Application Support/Adobe
2) SLStore
Windows: OS drive\ProgramData\Adobe
Mac: Library/Application Support/Adobe
3) OOBE
Windows: OS Drive\Users\<username>\AppData\Local\Adobe
Mac: /User/Library/Application Support/Adobe
Launch Premiere Pro and sign in with your Adobe ID.
NOTE: Make sure your Anti Virus/Firewall is not blocking any Adobe activation servers. Alternately, you can also check your 'hosts' file for any changes.
If that doesn't help, i would suggest running the CC cleaner tool to uninstall Adobe apps and then reinstall: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Thanks,
Rameez

How to import MXF files to Final Cut Pro with smooth editing

Summary: Follow this tutorial to learn how to import and edit MXF files in Final Cut Pro by converting MTS to FCP native format.
If you have a Panasonic P2, Canon XF or Sony XDCAM series camcorder,
you may be familiar with Material eXchange Format (MXF). Though MXF is a
great video format to record high-definition videos, it is not easy to
use in that they are not natively supported by most NLE systems like
Final Cut Pro. In order to import MXF to FCP for editing, the easy workaround is to transcode MXF files to FCP compatible video formats.
Along with some help from a top MXF Converter, it can be done. To
help those who wanna edit MXF files in FCP without problems, here I
share with you a simple guide on how to convert MXF files to edit in
Final Cut Pro 6/7 or FCP X.
First of all, downloading the App- Brorsoft MXF Converter for Mac
Overall, the program is a professional yet easy-to-use MXF Converter
on Mac (Mavericks included) which can not only convert XF100, Canon
C300, XF105 and XF305, Panasonic P2 recorded MXF files, but also provide
simple video editing functions for you. The MXF to FCP Converter not
only can convert MXF to ProRes for FCP, but also can transcode MXF
videos for editing in Avid MC, Adobe Premiere Pro, iMovie, FCE, etc.
Just download it and follow the tutorial below to get the work done.
Transcoding (P2) MXF files to ProRes for Final Cut Pro 6/7/X
1. Import MXF files to the converter
Launch the best MXF to FCP Converter, and then click the “add files” button to browse and import MXF videos from your camcorder or hard drive.
2. Select FCP editable format
Click the Format bar, and move mouse cursor to choose “Final Cut Pro > Apple ProRes 422 (*.mov)” as output format.
Tips:
a. Settings- click to set video
resolution(1920×1080/1440×1080/1280×720/720×480), bitrate (from 1Mbps to
20Mbps), frame rate (24p/30p)
b. Editor (next to “Add” icon)- click to set deinterlace, trim, crop, add effect, attach subtitles, etc
3. Start transcoding MXF video to FCP
Click “Convert” button to start converting MXF files to Apple ProRes
MOV for FCP 6/7/X under Mac OS. Once the MXF to ProRes 422 conversion
is done, you can transfer MXF footage into Final Cut Pro (X) for editing
smoothly on Mac with ease.
Source:How to import MXF files to Final Cut Pro with smooth editing
[quote] jacknjchn.tumblr.com/post/76914947404/cant-import-mxf-footage-to-fcp-transcoding-mxf-to-fcp [/quote]

You may refer to this step by step guide on how to convert MXF to Final Cut Pro more supported Apple ProRes or DV at http://www.idealshare.net/imovie-fcp/mxf-final-cut-pro.html
It also applies to convert MXF to other video or audio format. It even applies to convert other videos like AVCHD, MOD, TOD, AVI, and MPEG etc to FCP format.

Using XML-based object structures to represent data in code/at run-time

Hello,
I have quite a "high level" question which has be bothering me for some time, and I haven't found the subject tackled in any books. I believe J2SE/J2EE is not an important divide here.
Lets say I want to develop a J2SE game application with two programs: a "level designer", and a "level viewer", and I want to store the level files in an XML format.
My question, and I use this example only to try and illustrate it, is:
when coding the level designer or viewer, is it reasonable to use an XML-based object hierarchy for representing a level in code/at run-time, i.e. using the standard Java DOM APIs? Or should one (as I would have done before XML came along) develop a set of classes much closer to modelling the real form of a level, and then add a means to convert those objects to/from to XML format?
This second option of course I would use/would have used if I wasn't thinking about XML, but isn't it sometimes easier to just read in an XML file into a DOM representation and just use the data straight out of that structure, rather than go through the bother of parsing the XML into a set of unrelated objects defined by a different family of classes? What shapes your decision here? And if the second option is best, what is the easiest way of converting to/from the XML?
Thank you for any advice.
Greg

Hi Christian,
Can I ask: what about if your domain was quite 'close' to an object/DOM representation of XML?
For instance, what if a game operated by acting out a theatrical script, a spoken conversation, between two characters, perhaps somehow influenced at points by the user, and a particular level was just a different script for the characters.
One could imagine that the object representation of this would in the end be quite similar to how you'd represent XML, i.e. like a tree of nodes, where each node was a line from the script, and some nodes were a decision point where different nodes could be chosen from.
Would you still want to avoid using XML-based classes to represent the underlying 'game', or is there a point where you would 'give it' to the similarity and use existing XML structures directly?
Thank you for any advice
Greg

File is corrupted error while creating excel using xml

Hi have created one excel file using XML code and sent it to mail as attachement. But when i open it, it displays error message - file is corrupted and cannot be opened.
below is my code - please review and tell what is wrong in it ASAP :
* Creating a ixml Factory
   l_ixml = cl_ixml=>create( ).
* Creating the DOM Object Model
   l_document = l_ixml->create_document( ).
* Create Root Node 'Workbook'
   l_element_root = l_document->create_simple_element( name = 'Workbook' parent = l_document ).
   l_element_root->set_attribute( name = 'xmlns' value = 'urn:schemas-microsoft-com:office:spreadsheet' ).
   ns_attribute = l_document->create_namespace_decl( name = 'ss' prefix = 'xmlns' uri = 'urn:schemas-microsoft-com:office:spreadsheet' ).
   l_element_root->set_attribute_node( ns_attribute ).
   ns_attribute = l_document->create_namespace_decl( name = 'x' prefix = 'xmlns' uri = 'urn:schemas-microsoft-com:office:excel' ).
   l_element_root->set_attribute_node( ns_attribute ).
* Create node for document properties.
   r_element_properties = l_document->create_simple_element( name = 'TEST_REPORT' parent = l_element_root ).
   l_value = sy-uname.
   l_document->create_simple_element( name = 'Author' value = l_value parent = r_element_properties ).
* Styles
   r_styles = l_document->create_simple_element( name = 'Styles' parent = l_element_root ).
* Style for Header
   r_style = l_document->create_simple_element( name = 'Style'   parent = r_styles ).
   r_style->set_attribute_ns( name = 'ID' prefix = 'ss' value = 'Header' ).
   r_format = l_document->create_simple_element( name = 'Font' parent = r_style ).
   r_format->set_attribute_ns( name = 'Bold' prefix = 'ss' value = '1' ).
   r_format = l_document->create_simple_element( name = 'Interior' parent = r_style ).
   r_format->set_attribute_ns( name = 'Color'   prefix = 'ss' value = '#92D050' ).
   r_format->set_attribute_ns( name = 'Pattern' prefix = 'ss' value = 'Solid' ).
   r_format = l_document->create_simple_element( name = 'Alignment' parent = r_style ).
   r_format->set_attribute_ns( name = 'Vertical' prefix = 'ss' value = 'Center' ).
   r_format->set_attribute_ns( name = 'WrapText' prefix = 'ss' value = '1' ).
   r_border = l_document->create_simple_element( name = 'Borders' parent = r_style ).
   r_format = l_document->create_simple_element( name = 'Border'   parent = r_border ).
   r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Bottom' ).
   r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
   r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
   r_format = l_document->create_simple_element( name = 'Border'   parent = r_border ).
   r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Left' ).
   r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
   r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
   r_format = l_document->create_simple_element( name = 'Border'   parent = r_border ).
   r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Top' ).
   r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
   r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
   r_format = l_document->create_simple_element( name = 'Border'   parent = r_border ).
   r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Right' ).
   r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
   r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
* Style for Data
   r_style1 = l_document->create_simple_element( name = 'Style'   parent = r_styles ).
   r_style1->set_attribute_ns( name = 'ID' prefix = 'ss' value = 'Data' ).
   r_border = l_document->create_simple_element( name = 'Borders' parent = r_style1 ).
   r_format = l_document->create_simple_element( name = 'Border'   parent = r_border ).
   r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Bottom' ).
   r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
   r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
   r_format = l_document->create_simple_element( name = 'Border'   parent = r_border ).
   r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Left' ).
   r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
   r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
   r_format = l_document->create_simple_element( name = 'Border'   parent = r_border ).
   r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Top' ).
   r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
   r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
   r_format = l_document->create_simple_element( name = 'Border'   parent = r_border ).
   r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Right' ).
   r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
   r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
* Worksheet
   r_worksheet = l_document->create_simple_element( name = 'Worksheet' parent = l_element_root ).
   r_worksheet->set_attribute_ns( name = 'Name' prefix = 'ss' value = 'Sheet1' ).
* r_worksheet->set_attribute_ns( name = 'Protected' prefix = 'ss' value = '1' ).    " WORKING
* Table
   r_table = l_document->create_simple_element( name = 'Table' parent = r_worksheet ).
   r_table->set_attribute_ns( name = 'FullColumns' prefix = 'x' value = '1' ).
   r_table->set_attribute_ns( name = 'FullRows'     prefix = 'x' value = '1' ).
* Column Formatting
   r_column = l_document->create_simple_element( name = 'Column' parent = r_table ).
   r_column->set_attribute_ns( name = 'Width' prefix = 'ss' value = '40' ).
   r_column = l_document->create_simple_element( name = 'Column' parent = r_table ).
   r_column->set_attribute_ns( name = 'Width' prefix = 'ss' value = '90' ).
   r_column = l_document->create_simple_element( name = 'Column' parent = r_table ).
   r_column->set_attribute_ns( name = 'Width' prefix = 'ss' value = '140' ).
   r_column = l_document->create_simple_element( name = 'Column' parent = r_table ).
   r_column->set_attribute_ns( name = 'Width' prefix = 'ss' value = '150' ).
   r_column = l_document->create_simple_element( name = 'Column' parent = r_table ).
   r_column->set_attribute_ns( name = 'Width' prefix = 'ss' value = '90' ).
   r_column = l_document->create_simple_element( name = 'Column' parent = r_table ).
   r_column->set_attribute_ns( name = 'Width' prefix = 'ss' value = '90' ).
   r_column = l_document->create_simple_element( name = 'Column' parent = r_table ).
   r_column->set_attribute_ns( name = 'Width' prefix = 'ss' value = '90' ).
   r_column = l_document->create_simple_element( name = 'Column' parent = r_table ).
   r_column->set_attribute_ns( name = 'Width' prefix = 'ss' value = '90' ).
   r_column = l_document->create_simple_element( name = 'Column' parent = r_table ).
   r_column->set_attribute_ns( name = 'Width' prefix = 'ss' value = '90' ).
* Blank Row
   r_row = l_document->create_simple_element( name = 'Row' parent = r_table ).
* Column Headers Row
   r_row = l_document->create_simple_element( name = 'Row' parent = r_table ).
   r_row->set_attribute_ns( name = 'AutoFitHeight' prefix = 'ss' value = '1' ).
* RFQ No.
   r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
   r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ).
   r_data = l_document->create_simple_element( name = 'Data' value = 'RFQ No.' parent = r_cell ).
   r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).
* RFQ Line Item No
   r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
   r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ).
   r_data = l_document->create_simple_element( name = 'Data' value = 'RFQ Line Item No.' parent = r_cell ).
   r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).
* Material
   r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
   r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ).
   r_data = l_document->create_simple_element( name = 'Data' value = 'Material' parent = r_cell ).
   r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).
* Quantity
   r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
   r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ).
   r_data = l_document->create_simple_element( name = 'Data' value = 'Quantity' parent = r_cell ).
   r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).
* Order UNIT
   r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
   r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ).
   r_data = l_document->create_simple_element( name = 'Data' value = 'Order Unit' parent = r_cell ).
   r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).
* Delivery Date
   r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
   r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ).
   r_data = l_document->create_simple_element( name = 'Data' value = 'Delivery Date' parent = r_cell ).
   r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).
* RFQ Creation Date
   r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
   r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ).
   r_data = l_document->create_simple_element( name = 'Data' value = 'RFQ Creation Date' parent = r_cell ).
   r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).
* RFQ Deadline Date
   r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
   r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ).
   r_data = l_document->create_simple_element( name = 'Data' value = 'RFQ Deadline Date' parent = r_cell ).
   r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).
* Price
   r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
   r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ).
   r_data = l_document->create_simple_element( name = 'Data' value = 'Net Price' parent = r_cell ).
   r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).
** Login
* r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
* r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ).
* CONCATENATE 'Login - ' lv_date+6(2) '/' lv_date+4(2) '/' lv_date+0(4) INTO l_value.
* r_data = l_document->create_simple_element( name = 'Data' value = l_value parent = r_cell ).
* r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).
* Blank Row after Column Headers
   r_row = l_document->create_simple_element( name = 'Row' parent = r_table ).
   r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
   r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
   r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
   r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
   r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
   r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
   r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
   r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
   r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
   r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
   r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
   r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
   r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
   r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
   r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
   r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
   r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
   r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
* Data Table
   LOOP AT it_final1 INTO wa_final1.
     CLEAR l_value.
     r_row = l_document->create_simple_element( name = 'Row' parent = r_table ).
* RFQ No.
     r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
     r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
     CLEAR l_value.
     l_value = wa_final1-ebeln .
*    CONDENSE l_value NO-GAPS.
     r_data = l_document->create_simple_element( name = 'Data' value = l_value parent = r_cell ).           " Data
     r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).                               " Cell format
* Line Item No
     CLEAR l_value.
     r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
     r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
     l_value = wa_final1-ebelp.
     r_data = l_document->create_simple_element( name = 'Data' value = l_value   parent = r_cell ).           " Data
     r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'Number' ).                               " Cell format
* Material
     CLEAR l_value.
     r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
     r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
     l_value = wa_final1-txz01.
     r_data = l_document->create_simple_element( name = 'Data' value = l_value   parent = r_cell ).           " Data
     r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ).                               " Cell format
* RFQ QTY
     CLEAR l_value.
     r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
     r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
     l_value = wa_final1-ktmng.
     r_data = l_document->create_simple_element( name = 'Data' value = l_value   parent = r_cell ).           " Data
     r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'Number' ).                               " Cell format
* UNIT
     CLEAR l_value.
     r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ).
     r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ).
     l_value = wa_final1-meins.
     r_data = l_document->create_simple_element( name = 'Data' value = l_value   parent = r_cell

How to make a particular column non editable?
Make your style protected and pass that style name to your required column while passing data.
for example:
Find below the code for protection of a style.
Last two lines are very important.
* Style for Headert
   r_style = l_document->create_simple_element( name = 'Style'   parent = r_styles ).
   r_style->set_attribute_ns( name = 'ID' prefix = 'ss' value = 'Headert' ).
   r_format = l_document->create_simple_element( name = 'Font' parent = r_style ).
   r_format->set_attribute_ns( name = 'Bold' prefix = 'ss' value = '1' ).
   r_format = l_document->create_simple_element( name = 'Interior' parent = r_style ).
   r_format->set_attribute_ns( name = 'Color'   prefix = 'ss' value = '#B2FF64' ).
   r_format->set_attribute_ns( name = 'Pattern' prefix = 'ss' value = 'Solid' ).
   r_format = l_document->create_simple_element( name = 'Alignment' parent = r_style ).
   r_format->set_attribute_ns( name = 'Vertical' prefix = 'ss' value = 'Bottom' ).
   r_format->set_attribute_ns( name = 'WrapText' prefix = 'ss' value = '1' ).
   r_border = l_document->create_simple_element( name = 'Borders' parent = r_style ).
   r_format = l_document->create_simple_element( name = 'Border'   parent = r_border ).
   r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Bottom' ).
   r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
   r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
   r_format = l_document->create_simple_element( name = 'Border'   parent = r_border ).
   r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Left' ).
   r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
   r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
   r_format = l_document->create_simple_element( name = 'Border'   parent = r_border ).
   r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Top' ).
   r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
   r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
   r_format = l_document->create_simple_element( name = 'Border'   parent = r_border ).
   r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Right' ).
   r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ).
   r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ).
   r_format = l_document->create_simple_element( name = 'Protection' parent = r_style ).
   r_format->set_attribute_ns( name = 'Protected' prefix = 'ss' value = '1' ).

Import MXF (P2) using XML

Similar Messages

Maybe you are looking for