Import ODI code and extend

Hi,
We are from HSGBU and trying to extend and use OBIA Day dimension ETL code (ODI).
We can take the particular OBIA Day dimension code using ODI Smart export/Smart import.
But using smart export/import, it will import all its dependent components starting from topology, project (top level objects) to data stores (bottom level object) in the model.
Then we have to manually change all the components as per our data stores/models and topology and then to extend the same for our extra attributes.
Hence we are looking if there is some direct or easier way to import and use/extend OBIA Dimension code.
Thanks
-Anuradha

Hi Anuradha,
Smart import provides options to reuse/copy/overwrite/ignore objects from the import file. Wouldn't choosing reuse serve your purpose where you want to avoid overwriting existing dependent objects?
Thanks,

Similar Messages

Productionising ODI code and interfaces

I come from a programming background, and there is one aspect of ODI that is confusing me.
When I do development work on ODI, I usually reverse engineer Hyperion Planning, Hyperion Essbase, and some Oracle views which are all also in Development. I build the interfaces, test them and make sure they all work well.
Now, when it comes to moving these interfaces into production, to me, the logical meaning of that processis that the same interface should be hitting the ORacle views, Hyperion Planning/Essbase on the Production servers. So, my question then is how do I do that.
If I have to reverse engineer the planning and essbase models in Production all over again, and re-build the interfaces, its just duplication of work and a waste of time. I looked in the user guide and admin guide, but neither of them were helpful.
Any gurus out there, your help will go a long way and will be very much appreciated!!
Thanks

You're not far from where you want to get. If the structures in DEV and PROD are identical, then you don't have to worry about creating models and interfaces in PROD. ODI takes care of this through its layered architecture of Logical and Physical schemas which are linked via Contexts.
Here are some guidelines...
In Topology Manager:
- Create your PROD servers and physical schemas
- If your Master Repository for PROD is on a different server than for DEV, then create the Logical schemas with the same names that you have in DEV
- Create a PROD context and assign each logical schema to the corresponding physical schema
- Set up your PROD Work Repository as an Execution Repository (there is an option when you create the repository
(It is very important that the names are identical in PROD and DEV, the so called CODES are what links Master and Work Repositories)
In DEV Designer:
- Generate scenarios from the integration processes you want to migrate
- Export the scenarios to XML
In PROD Operator (PROD Designer is not available as it is an execution repository which is readonly - except for variables):
- Import the scenarios
- Launch the scenarios to test everything is working.
Hope this helps.
Regards,
Matt

Important transaction codes and guidelines ...

Hi to all
Please tell me what are the things that a person should keep in mind while working in realtime servers.
What are the transaction codes , programs which are most commonly used.
Please send me as I have newly joined a company.
Thanks ...

Hi
may be this can help..
BASIS/ABAP
SEARCH_SAP_MENU      Show the menu path to use to execute a given tcode. You can search by transaction code or menu text.
DI02      ABAP/4 Repository Information System: Tables.
LSMW      Legacy System Migration Workbench. An addon available from SAP that can make data converstion a lot easier. Thanks to Serge Desland for this one.
OSS1      SAP Online Service System
OY19      Compare Tables
SM13      Update monitor. Will show update tasks status. Very useful to determine why an update failed.
S001      ABAP Development Workbench
S001      ABAP/4 Development Weorkbench. (from [email protected])
S002      System Administration. (from [email protected])
SA38      Execute a program. (from [email protected])
SCAT      Computer Aided Test Tool
SCU0      Compare Tables
SE01      Old Transport & Corrections screen
SE03      Groups together most of the tools that you need for doing transports. In total, more than 20 tools can be reached from this one transaction.
SE09      Workbench Organizer
SE10      New Transport & Correction screen
SE11      ABAP/4 Dictionary Maintenance SE12 ABAP/4 Dictionary Display SE13 Maintain Technical Settings (Tables)
SE12      Dictionary: Initial Screen - enter object name. (from [email protected])
SE13      Access tables in ABAP/4 Dictionary. (from [email protected])
SE14      Utilities for Dictionary Tables
SE15      ABAP/4 Repository Information System
SE16      Data Browser: Initial Screen. (from [email protected])
SE16N      Table Browser (the N stands for New, it replaces SE16). Provided by Smijo Mathew.
SE17      General Table Display
SE24      Class Builder
SE30      ABAP/4 Runtime Analysis
SE32      ABAP/4 Text Element Maintenance
SE35      ABAP/4 Dialog Modules
SE36      ABAP/4: Logical Databases
SE37      ABAP/4 Function Modules
SE38      ABAP Editor
SE39      Splitscreen Editor: Program Compare
SE41      Menu Painter
SE43      Maintain Area Menu
SE48      Show program call hierarchy. Very useful to see the overall structure of a program. Thanks to Isabelle Arickx for this tcode.
SE49      Table manipulation. Show what tables are behind a transaction code. Thanks to Isabelle Arickx for this tcode.
SE51      Screen Painter: Initial Screen. (from [email protected])
SE54      Generate View Maintenance Module
SE61      R/3 Documentation
SE62      Industry utilities
SE63      Translation
SE64      Terminology
SE65      R/3 document. short text statistics SE66 R/3 Documentation Statistics (Test!)
SE68      Translation Administration
SE71      SAPscript layout set
SE71      SAPScript Layouts Create/Change
SE72      SAPscript styles
SE73      SAPscript font maintenance (revised)
SE74      SAPscript format conversion
SE75      SAPscript Settings
SE76      SAPscript Translation Layout Sets
SE77      SAPscript Translation Styles
SE80      ABAP/4 Development Workbench
SE81      SAP Application Hierarchy
SE82      Customer Application Hierarchy
SE83      Reuse Library. Provided by Smiho Mathew.
SE84      ABAP/4 Repository Information System
SE85      ABAP/4 Dictionary Information System
SE86      ABAP/4 Repository Information System
SE87      Data Modeler Information System
SE88      Development Coordination Info System
SE91      Maintain Messages
SE92      Maintain system log messages
SE93      Maintain Transaction. (from [email protected])
SEARCH_SAP_MENU      From the SAP Easy Access screen, type it in the command field and you will be able to search the standard SAP menu for transaction codes / keywords. It will return the nodes to follow for you.
SEU      Object Browser
SHD0      Transaction variant maintenance
SM04      Overview of Users (cancel/delete sessions)
SM12      Lock table entries (unlock locked tables)
SM21      View the system log, very useful when you get a short dump. Provides much more info than short dump
SM30      Maintain Table Views. (from [email protected])
SM31      Table Maintenance
SM32      Table maintenance
SM33     Display Table Parameter ID TAB
SM35      View Batch Input Sessions
SM37      View background jobs
SM50      Process Overview. (from [email protected])
SM51      Delete jobs from system (BDC)
SM62      Display/Maintain events in SAP, also use function BP_EVENT_RAISE
SMEN      Display the menu path to get to a transaction
SMOD      Transactions for processing/editing/activating new customer enhancements.
CMOD      Transactions for processing/editing/activating new customer enhancements.
SNRO      Object browser for number range maintenance. (from [email protected])
SPRO      Start SAP IMG (Implementation Guide). (from [email protected])
SQ00      ABAP/4 Query: Start Queries
SQ01      ABAP/4 Query: Maintain Queries
SQ02      ABAP/4 Query: Maintain Funct. Areas
SQ03      ABAP/4 Query: Maintain User Groups
SQ07      ABAP/4 Query: Language Comparison
ST05      Trace SQL Database Requests. (from [email protected])
ST22      ABAP Dump analysis
SU53      Display Authorization Values for User. (from [email protected])
PFCG     Role maintenance
SU21     List of object classes
WEDI      EDI Menu. IDOC and EDI base.
WE02      Display an IDOC
WE07      IDOC Statistics
Cheers
VJ

[Urgent]How to import odi procedure from 11g to 10g.

Hi All,
I am trying to import odi code(interface/procedure) from 11g to 10g but gettting xml error.
Please reply as soon as possible.
Thanks

Forward compatibility for importing odi artifacts is not supported.

Import java code applet into form and execute it

Hi all.
I'm on devsuite 10g.
I have the following applet code:
import java.applet.Applet;
import java.awt.event.*;
import java.awt.*;
public class simple2 extends Applet
implements MouseListener, MouseMotionListener {
      double r0 = 100.0;
      double r1 = 40.0;
    public void paint(Graphics g) {
      int n = 400;
      int x0=0,y0=0,x1,y1;
      for(int i=0;i <=n;i++)
           double rho   = 2*Math.PI*i/n;
           double theta = 16*Math.PI*i/n;
           double x = r0*Math.cos(rho) + r1*Math.cos(theta);
           double y = r0*Math.sin(rho) + r1*Math.sin(theta);
           // cambio sistema di riferimento
           x1 = getSize().width/2+(int)x;
           y1 = getSize().height/2+(int)y;
           // disegno
           if(i>0) g.drawLine(x0,y0,x1,y1);
           x0 = x1;
           y0 = y1;
    public void init() {
      addMouseListener(this);
      addMouseMotionListener(this);
    public void mouseClicked(MouseEvent e) {}
    public void mousePressed(MouseEvent e) {}
    public void mouseReleased(MouseEvent e) {}
    public void mouseEntered(MouseEvent e) {}
    public void mouseExited(MouseEvent e) {}
    public void mouseMoved(MouseEvent e) {}
    public void mouseDragged(MouseEvent e) {
      int x = e.getX(), y = e.getY();
      r0 = x-getSize().width/2;
      r1 = y-getSize().height/2;
      repaint();
      e.consume();
} I want to import this code into my form in order to execute it.
Code make possible drawing graphs to screen...
What I want is to execute this code into my form, in a when-new-block instance trigger or something else.
How can I achieve this???
Thanks all for collaboration,
Fabrizio

It isn't quite as simple as just "importing" your java code if your goal is to have the forms and the java app communicate with each other. Interaction occurs when a properly designed Java Bean is created.
Take a look at some of the examples on the following page as they can likely provide you with a good starting place:
http://sheikyerbouti.developpez.com/forms-pjc-bean/menu/

How do I write a javascript code to open InDesign File, import Doc, save and export to pdf?

How do I write a javascript code to open InDesign File, import Doc, save and export to pdf?

Hi hasvi,
Need Template(.indt), textframes etc for the following script:
var myFolderInd = Folder.selectDialog();
var myFile = myFolderInd.getFiles("*indt");
app.open(myFile)
var myDoc = app.activeDocument;
var myDocName = myDoc.name;
var mySaveFile = app.activeDocument.save(myFolderInd.fsName + "/" + myDocName.split(".indt").join(".indd"));
var myFolderDoc = Folder.selectDialog();
var myFile1 = myFolderDoc.getFiles("*doc");
mySaveFile.pages[0].textFrames[0].place(File(myFile1))
//~ mySaveFile.place(File(myFile1))
app.activeDocument.textPreferences.smartTextReflow = true;
var myPDFFile = new File(mySaveFile.filePath + "/" + mySaveFile.name.split(".indd").join(".pdf"))
myDoc.exportFile(ExportFormat.PDF_TYPE, File("~/Desktop/abc.pdf"));
alert("Process Completed")
Regards
Siraj

Creation of Import Control/commodity codes and Language translation

Dear All,
My requirement is to maintain new control codes for country India for the different Custom duty rates and to maintain the condition records for all the condition types associated with Customs Duty.
1) I have already maintained chapter-ids in J1ID on production.
2) In SPRO, I have defined new Commodity codes/import code by country for which a customizing request is generated on
     development server, the menu path being:-
                     - Sales & Distribution
                          - Foreign Trade/Customs
                              - Basic data for foreign trade
                                   - "Define commodity code/import code numbers by country"
Query :- Now, my customizing request is pending and I have been asked to maintain the the translation for all new created commodity codes and have also been asked to copy the English description to all existing languages.
I need to know at an earliest how to maintain the translation for the newly created codes.
Hope I have made my query clear !

Hi,
Please gothroufh the Link
http://help.sap.com/saphelp_erp2004/helpdata/EN/93/744afe546011d1a7020000e829fd11/content.htm
You can also get more details on Foreign trade & Customs in SAP help portal
http://help.sap.com/saphelp_erp2004/helpdata/EN/d8/2585347860ea35e10000009b38f83b/frameset.htm
Thanks,
Raja
Edited by: Raja Singh Chhabeda on Jul 22, 2008 8:10 PM

I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?

In 2012, I bought Photoshop CS6 Extended (education edition) for Mac. Now I want to install it on my new Macbook. I have the correct serial number and product code, but I receive an error message: the software may be a false copy etc....What to do?

Here is a copy of the error
This means : Installation failed.
Verification of the Adobe Software failed
The product you want to install is no valid Adobe product and seems to be falsified.
HUgo
Op 29-aug.-2014, om 23:42 heeft Jeff A Wright <[email protected]> het volgende geschreven:
I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Hugo please turn off your e-mail signature.
If your serial number is listed as being valid at http://www.adobe.com/ then I would recommend obtaining a fresh copy of the installation files. You can find details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
To download a fresh copy of the installation files please see Download CS6 products.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6685617#6685617
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Extend customer to multiple company codes and mutliple sales organisations

Hi,
Customers with only general info. are getting created from CRM system to SAP ECC. Now we extend the same customer to differnt company codes and different sales organisations.
When I checked the BADI, CUSTOMER ADDDATA, in this S_KNA1, S_KNB1, S_KNVV structures are there only. So is it possible to extend it to mutiple company codes at the same time.
It is mostly appreciated for early response.
Thanks,

Hi,
You can use fm SD_CUSTOMER_MAINTAIN_ALL to extend customer to sales are and company code.
Using this fm you can maintain all customer master data.

Code Inspector and Extended program check in one program

Hello SAP gurus,
We have a requirement where we need to create one tool which will have both code inspector and extended program check functionality and report should display all error, warning messages which are found from these checks.
Can anyone provide some suggestions on this?
Thanks,
Khushboo Dand

Hi,
Go to Se38 and check how code inpsector and extended syntax check. I dont remember the exact function module name but just debug a little u will be able to find it.
Nabheet

Importing a journal voucher with GL Codes and BP Codes

Hi Experts,
I'm trying to get a DTW import for Journal Vouchers working on 8.8 PL05. I have a journal voucher template with GL Codes and BP Codes that I need to import as this is part of some integration.
If I leave out the BP Codes it works fine but if I add them into the sheet is gives a DTW error "invalid account code application-defined or object-defined error 65171".
I have tried to add BP code to shortname and add contra account.
Please any help would be appreciated.
Regards
Lou van Wyk

Welcome to SAP forum Lou...
I do not know about 8.8 Journal vouchers, but some time ago we were importing with BP codes and we ran into a somewhat similar situation. I believe we had to format the BP codes to Text in Excel before saving the file to CSV.
Another time I was working with an individual who had not set up two BP Master Data records before doing transactions like it states in SAP's User Guide titled Data Migration and Opening Balances...
Maybe that helps?
Regards,
Zal

Commodity code and import code no

hi SAP SD guys,
can any body explains about commodity codes and import
codes number? for what purpose it is used?

when trading internationally, then you need to find the correct commodity code for your goods , so you can fill out the customs paperwork accuratly. the code is minimum 8digit, but can be more. depending on the code you can lookup duty rates and import export restrictions.
commodity code and import code no and HTS harmonized tariff schedule is basically the same and captured in just one single field in SAP. It is used as well for European trade statistics such as Intrastat and extrastat.

Company code and Purchase Org during vendor registration

Hi,
I have one enterprise context, with many company codes and purchasing org.
I am aware that vendor master data is at enterprise level in ESO. However while integrating to backend i need to capture the relevant co code and Purchasing org.
When the Purchaser wants to create a vendor, there does not seem anyway to enter which Purchasing org and company code the vendor should be created for.
Need your suggestions for the following options
1) capture co code and Purchasing org on bespoke fields and then in PI, pass these values to Co code and Purch org resp
2) create company contexts - would this resolve this? what are the implications if one vendor needs to be extended to multiple co codes
regards
Subrote

Hi,
Have you imported integration config workbook.
As part of ECC integartion guide we have couple of workbook and XML needs to integrated, which will create all the required extension for vendor master and vendor registration.
Once you imported the integration workbook, you will able to see the company code and purchasing org screens in vendor master.
Thank you,
Mani

What are the importent transaction codes in edi

what are the importent transaction codes in edi

hi,
=>sale - ALE Customizing
=>bale - Distribution Administration (ALE)
=>wedi - IDOC Type and EDI Basis
=>shdb - BDC (Transaction Recorder)
=>lsmw - LSMW
=>bapi - BAPI
=>spau - Display Modified DE Objects
=>spdd - Display Modified DDIC Objects
=>sara - central idoc archiving
=>stms - Transport Management System
=>wedi - IDOC Type and EDI Basis (IDOC Configuration)
=>bd21 - Analyze change pointers - create IDOC from change pointer
=>bd10 - Send Material Master
=>bd12 - Send Customer Master
=>bd14 - Send Vendor Master
=>bd50 - Activate Change Pointer for Message Type
=>bd55 - Conversion rule user exit (Link conversion rule user exit to the different system \ partner combinations)
=>bd54 - Maintain Logical Systems
=>bd71 - Distribute Customer Model
=>bd87 - Process Inbound IDOCs
=>bd88 - Process Outbound IDOCs
=>bdm2 - Cross-system IDOC Reporting
=>bdm7 - ALE Audit - statistical analyses
=>bdm8 - ALE Audit - sending confirmations
=>bd61 - Activate Change Pointer generally
=>bmv0 - Direct Input Data Transfer Administration
=>rz04 - Operation Mode
=>rz12 - RFC Server Group Maintenance
=>sar3 - Archiving object customizing
=>s001 - SAPoffice Inbox
=>s010 - Standards Texts (SAP Script)
=>se01 - Transport Organizer (Extended View - Performing and managing the transport of development object across different systems)
=>se09 - Transport (Workbench) Organizer (Controlling and keeping track of Development work and Development Objects)
=>se78 - Administration of Form Graphics (Import Graphics into SAP System)
=>se84 - ABAP Repository Information (search for SAP objects)
=>su01 - User Maintenance (Security)
=>su02 - Maintain Authorization Profiles
=>su03 - Maintain Authorizations
=>sm36 - Background Job Scheduling
=>sm37 - Background Job Monitoring (display batch jobs)
=>sm31 - Table Maintenance
=>sm30 - Calling View Maintenance
=>sm35 - Batch Input Monitoring (Error Logs)
=>sm50 - Process Overview
=>sm58 - Transactional RFC Monitoring
=>sm59 - Maintain RFC Destinations (Define RFC Configuration)
=>snro - Number Range Objects (for IDOCs)
=>we02 - Display IDOC
=>we05 - IDOC lists
=>we07 - IDOC statistics
=>we12 - Inbound processing of outbound file - convert outbound to inbound file
=>we14 - Process (dispatch) IDOCs through Port - RSEOUT00
=>we15 - Outbound IDOC from NAST - message control
=>we16 - Inbound File
=>we18 - Generate status file
=>we19 - Test tool
=>we20 - Add new Message Type to Partner Profile
=>we21 - Maintain Port Definition
=>we30 - IDOC Type development
=>we31 - IDOC Segment development
=>we41 - Process Code Outbound
=>we42 - Process Code Inbound
=>we46 - IDoc Administration
=>we47 - Status Code Maintenance
=>we57 - Assign function module to logical message and IDoc type
=>we63 - IDOC Type for Parser Output
=>we82 - Assign IDOC to Message Type
=>we60 - IDOC Documentation - IDOC Types
=>we61 - IDOC Documentation - IDOC Record Types
=>we81 - Create new IDOC Message Types
=>we82 - Assign IDOC to Message Type
=>pa20 - Display HR Master Data
=>pa30 - Maintain HR Master Data
=>bd59 - Create and assign Filter Object Type for Message Type
=>bd64 - Maintenance of ALE or any other Distribution Model
Hope this helps, Do reward.

Adf bc jar for base entity classes and extending them existing project

Hi,
I am using jdev 11.1.1.0 and have created a base workspace/project and adf jar for my base entity classes.
1. I can consume this base adf bc jar in a separate new consuming workspace and create VO based on base bc classes or create new EOs that extend base bc entity classes.
2. Furthermore, for an existing consuming project that earlier included src/ of base entity (BC components), i can remove the dependency on bc source and bring in this new adf jar and everything including the view controller and the service/datacontrol works fine.
The issue i am running into is as follows.
- In the existing project (#2) above i try to create a couple of entities based on entities in my base jar; associations are automatically brought in. Note i am not overriding any attributes. My intent here is to generate .java and implement some code.
- I then try to make my existing VOs based on the newly extended entity (VO overview->Entity Objects-> Shuttle NewEntity from Available to Selected)
- I then try to remove the old EO from selected under VO overview->Entity Objects->Shuttle OldEntity from Selected back
- I get a warning dialog box that says something to the effect that some viewlinks are dependent on these old EOs in this consuming project.
- I tried to laboriously analyzed dependencies and it this dialog box does not make any sense as I have already extended EOs and the tooling should be able to let me use these
My questions
- Why I am not able to remove old entities from VO dependencies
- Is it ok to leave the old EOs in "Selected" along with the newly extended EO ? What are the implications for this?
- I also thought about extending base associations, but did not go anywhere.
In general, I am ok with consuming an ADF BC jar that has entities etc. but not clear about removing dependencies of base EOs on VOs when entities are extended and consumed in a pre-existing project that used base entities.
I can send a project if any PM is willing to take a look at it.
Thanks,
ps:
I have already gone over the following info
http://technology.amis.nl/blog/215/organization-of-bc4j-domain-eo-and-business-vo-package
.. wants to create an enterprise data model in BC4J, reflecting the Enterprise Data Model set up in the RDBMS. All (or at least most) business rules will be implemented in the Middle Tier – to take the load of the database and also allow developers not comfortable with PL/SQL to define and maintain the business rules. It is clear that this means that all applications that need to access – and manipulate – the database, need to go through the BC4J foundation layer. Martijn wants to define the Entity Objects – and their business rules – only once and share that definition between different projects. Each projects can create its own ViewObjects on top of these shared Enterprise Entity Objects.
http://radio-weblogs.com/0118231/2005/09/29.html
I am currently working on a project for a partner where we will be using ADF BC as our model layer for a large application. In order to keep the footprint of each application module down to a reasonable size, we are intending to create a number of separate 'root' application modules for each functional area of the application. Within, these 'root' application modules we will then use nested application modules to further partition the application. All of the application modules will be accessing the same datasource and will need access to the same database objects.
In order to separate our code between the development team and into function areas, our initial thoughts were that we would create an ADF BC model project containing Entity Objects for all of the database tables e.t.c. as these are common amongst all functional areas. We have configured all of the EOs for validation rules, defaulting values and extending doDML() as appropriate. Happy at this stage we then created a simple .jar file to deploy all of the definitions. Upon creating a new ADF BC project for each functional area we added the jar file as a library import into the new project. However when we the tried to create some new View Objects via the JDev Wizard we were unable to see the imported Entity Objects.
Is the only way to share Entity Object definitions between different ADF BC projects to manually copy the source definition files into the new projects src directory? Since this would mean multiple copies of the same components, it could prove to be a maintenance nightmare.Is there a way of doing it without creating multiple copies of the same object definitions?
The developer is spot on in their ideas of layering and reuse, and even has created a library for their reusable entities. This last step is not something everyone thinks to do. The missing step is known as "importing" components, so with that one extra bit of knowledge under his belt, he should be able to do exactly what he envisions. My little article called Difference Between Adding and Importing Business Components tries to explain the difference and gives the menu options to choose to perform the importing.
Difference between adding and importing BC4J
http://radio-weblogs.com/0118231/stories/2005/08/11/differenceBetweenAddingAndImportingBusinessComponents.html
Working with Libraries of Reusable Business Components
http://download.oracle.com/docs/cd/B32110_01/web.1013/b25947/bcadvgen.htm#CHEFECGD

Hi,
since you followed the OC4J developer guide I think this question might be better handled there as well
OC4J
So in case you don't get an answer here on the forum, try it on the OC4J forum
Frank

Import ODI code and extend

Similar Messages

Maybe you are looking for