Import package: Automation error Interface not registered

Standard Import.dtsx package, which has been working well before fails on Load and Process stage with following error:
Automation error
Interface not registered
This is on 7.0MS SP03  dual server: app server and  64bit MSSQL Server 2008
Did dll got unregistered?
Thanks,
Roman

Hi,
   Please verify if you have EVERESTDMSERVER COM+ Object. Try to shutdown all BPC COM+ components on application server.
Regards,
Mihaela

Similar Messages

  • Error: the QueryInterface call on the COM component for the interface with IID '{00063033-0000-0000-C000-000000000046}' failed due to the following error: Library not registered.

    I have a outlook 2007 plugin created in VS 2008 that reads calendar meetings. This plugin also works with outlook 2010. I used to debug this application from VS 2010 as well.
    Last month, I installed Office 365 to test something. Later I uninstalled this version but after that my plugin application is crashing, every time a new appointment/meeting is created in calendar.
    I get the below error:
    Unable to cast COM object of type 'System.__ComObject' to interface type 'Microsoft.Office.Interop.Outlook._AppointmentItem'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{00063033-0000-0000-C000-000000000046}'
    failed due to the following error: Library not registered. (Exception from HRESULT: 0x8002801D (TYPE_E_LIBNOTREGISTERED)).
    Tekriti Software

    Thanks for your sharing and have a nice day.
    Yoyo Jiang[MSFT]
    MSDN Community Support | Feedback to us
    Develop and promote your apps in Windows Store
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Not able to spy objects in ie9 using coded UI Test Builder Spy, giving exception -Interface not registered(Exception from HRESULT:0X....

    Not able to spy objects in ie9 using coded UI Test Builder Spy, giving exception - "Interface not registered(Exception from HRESULT:0X...."
    I am not able to capture any objects of my web application using coded ui recorder. Even though it is a simple html page, coded ui is showing a message  -"Interface not registered(Exception from HRESULT:0X...."
    Please give me solution , why this is hapening. I am having problem with object identification. Even I am not able to identify any object in google.com.
    swapnanil sengupta

    TechnologyName is displaying as "MSAA" . But my application is a Webapplication.If I try to spy the google .com's search field then also TechnologyName is displaying as "MSAA". Is it any configuration issue of vsts codedui.
    swapnanil sengupta

  • Automation error element not found in vb6 2147319765 after upgrading the os

    Hi we had updated our OS to windows 7 from XP.Previously we had an application in XP which is built on Vb 6 .The application throws an error message like Automation error --element not found with error code 2147319765 .The application shows the same error
    message even after I ran the application in XP compatability mode.
    The application is using data from other servers and all the servers are windows server 2003.
    muneer

    Double post:
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/229b4e46-9bcb-411e-901e-fec376dc36da/automation-error-element-not-found-in-vb6-2147319765-after-upgrading-the-os
    This forum is about VB.Net. If your question is about a VB6 project, have a look here:
    Where to post your VB 6 questions
    Armin

  • Hello I have lost my serial number for adobe photoshop elements. Bought from John Lewis last month. I did have it installed but had to uninstall but cannot find the any of the packaging etc plus did not register. What is the best way of getting it install

    Hello I have lost my serial number for adobe photoshop elements 13. Bought from John Lewis last month. I did have it installed but had to uninstall but cannot find the any of the packaging etc plus did not register. What is the best way of getting it installed again/replacement? Thanks

    Do you have the receipt? If you have proof of ownership, you _may_ be able to persuade Customer Support to help you out.  I imagine you would need to scan and email that proof if it works at all.

  • While installing the itunes setup i am getting an error"Could not register type library for file ipodsevice.exe" What to do now?

    While installing the itunes setup i am getting an error"Could not register type library for file ipodsevice.exe" What to do now?

    Try posting in the iTunes forum.  You have an iTunes problem not an iPod problem

  • Cannot export zoneset, getting the error ""interface not isolated""

    Customer is trying to run the command "zoneset export vsan <VSAN ID> and is getting the error "interface not isolated". Looking the manuals, it sounds that the interface should not really be isolated. The customer has a new mds 9124 and is trying to integrate it in the san that has another mds9513 and a brocade. The domain if of the new mds is 100. The mds9513 domain id is 99 and the brocade domain id is 98. The interop mode is 1 in all the switches. Does someone has any idea what is happening?

    onal instruments\lookout". Even though when I use windows explorer I can plainly see the file in that directory. I have tried re-installing the software and that does not seem to help. Is there a step that I am missing. I never had this problem with 4.0.1.Sukesh Puri
    well i think that u are creating the web page but the paths u are giving in web export options are arbitrary..like u are export it to the local directory in the hark disk and in the server url u are giving the arbitrary path but not accessing it till now...to correct this option see the code of the u'r generated html page and see from where it is retrieving code just change the url to the local folder instead of server url given of required ddl..

  • Dynamic SMTP Port Error -Class not Registered

    Hi,BizTalk receiving the Invoice Message from Source and doing some transformation.After that Biztalk will send  email  dynamically via SMTP .Below is the code in message construct message assignment shape
    multipartMessage1.MessagePart_1= XMLdoc;
    multipartMessage1.MessagePart_2="This is message part2 as a string";
    multipartMessage1(SMTP.Subject) ="Email From Dynamic Port";
    multipartMessage1(SMTP.From) ="[email protected]";
    multipartMessage1(SMTP.SMTPHost) ="100.110.120.99";
    multipartMessage1.MessagePart_2(MIME.FileName) = "Attachment_Name";
    multipartMessage1(SMTP.SMTPAuthenticate) =0;
    SendInvoicePort(Microsoft.XLANGs.BaseTypes.Address)="mailto:[email protected]";
    When run the application, getting below error message.
    A message sent to adapter "SMTP" on send port "HelloWorld_1.0.0.0_Microsoft.Samples.BizTalk.HelloWorld.HelloSchedule_SendInvoicePort_d7ce16ba803d4f87"
    with URI "mailto:[email protected]" is suspended.
     Error details: Class not registered
     MessageId:  {0D6BBA1A-F384-4AD9-8B48-44A9C342DEFB}
     InstanceID: {EAFEADE1-8D05-4A7D-A908-7BC297788D06}
    After googling ,I have added
    multipartMessage1 (SMTP.EmailBodyTextCharset) = "UTF-8".but no use.
    I’ve spent many hours on this issue .Please advise how to resolve this issue

    Hi Singam,
    What is the default handler(host) configured for SMTP Adapter. Check it is 32 bit or 64 bit.
    This seems to be a known issue if Host is of 64 bit.
    Retrieving the COM class factory for component with CLSID {254B4003-2AA7-4C82-BB2E-18BA7F22DCD2} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)).
    When you use BizTalk in 64 bit version, and the Mime/Smime encoder you’ve got this error. To resolveit, just put your pipeline on a 32 bit Host.
    Mime/SMIME encoder error :
    Class not registered (Exception from HRESULT: 0×80040154 (REGDB_E_CLASSNOTREG)) 
    http://social.technet.microsoft.com/wiki/contents/articles/7204.biztalk-server-list-of-errors-and-warnings-causes-and-solutions.aspx
    As you are using Dynamic Send Port it will run under the default host make it of 32 bit, restart the host and see if the issue is resolved or not.
    Thanks,
    Prashant
    Please mark this post accordingly if it answers your query or is helpful.

  • Error Program not registered

    I get the following error when I test an RFC;
    Logon     Connection Error
    Error Details     Error when opening an RFC connection
    Error Details     ERROR: program BIS_TR9.TRFC not registered
    Error Details     LOCATION: SAP-Gateway on host cpsaput1 / sapgw61
    Error Details     DETAIL: TP BIS_TR9.TRFC not registered
    Error Details     COMPONENT: SAP-Gateway
    Error Details     COUNTER: 21389
    Error Details     MODULE: gwr3cpic.c
    Error Details     LINE: 1777
    Error Details     RETURN CODE: 679
    Error Details     SUBRC: 0
    Error Details     RELEASE: 700
    Error Details     TIME: Wed Aug 22 16:33:49 2007
    Error Details     VERSION: 2
    The Gateway monitor connections to clients has this entry:
    242     cpamhq-sbg04     BIS_TR9.TRFC     Registered Server     cpamhq-sbg04     10.5.1.141     Wed Aug 22 16:34:39 2007     Connection OK
    This is a copy of a previous system on the same server with a different system number.  It has support package stack 10 with kernel patch number 121.
    Thanks,
    Joe

    Hello Joe,
    From the error logs I can make out two things.
    Your SAP resides on cpsaput1  while external program resides on cpamhq-sbg04 .
    Now you have done a system copy on cpsaput1 from a SAP system which was connecting fine to the RFC. That connection was going through because SAP details for the old server were correctly maintained at cpamhq-sbg04  but the same has not been done for cpsaput1  . Ask the adminsitrators for cpamhq-sbg04  to make settings for cpsaput1  and then try RFC again.
    Regards.
    Ruchit.

  • Interface not registered (Exception from HRESULT: 0x80040155) when calling Microsoft.Office.Interop.Outlook.MAPIFolder.get_Folders()

    Hi All,
    I have an Outlook COM addin written in C#. It is working without any issues on most client machines, but since of late it has started giving the above Exception for some clients running Outlook 2010.
    I understand that the issue is that the particular interface is not registered properly on those machines. I would like to know what in dll that interface is located and what could cause it to be missing? Can it be a component that had been deselected during
    the installation of Outlook? If so, what is that component? Or should the dll be manually registered (using REGSVR32)? Or will running a simple repair on Outlook work?
    Thanks!!

    Hello Thimila,
    What code do you use exactly?
    Try to run the problematic piece of code from VBA as a macro. Do you get the same error message? If so, you need to repair Outlook, it looks like windows registry entries were corrupted. 
    If you don't get such error in VBA it indicates that you didn't install/copy one of the required prerequisites to the end user PC (interop libraries, .net runtime and etc.). Make sure that all the required prerequisites are installed correctly. See Deploying
    an Office Solution for more information.

  • DeliveryException: Interface not registered

    When calling a Interface on a bpm I get the following exception:
    com.sap.aii.af.ra.ms.api.DeliveryException: Interface http://UNO/XI/SMS#SmsInterface not registered
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapterFramework</SAP:Category>
      <SAP:Code area="MESSAGE">GENERAL</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Interface http://UNO/XI/SMS#SmsInterface not registered</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    This Interface is ok in my testimg environment. This error only occurs in the production environment.
    The interface was working correctly. I think this problem started after XI upgrade. System now is to SAP_BASIS 700.
    Any clues to this problem? Thanks in advance,
    Miguel Pereira

    Similar thread found on thread I guess the bean/service is not deployed on PRD. See your SOAP Adapter configuration and test message interface also.
    regards,
    nikhil

  • Importing CDs into iTunes - User Not Registered For Online Use

    I am on Windows 8.1 Pro using iTunes 12.0.1.26 and am trying import CDs into my iTunes library.  When I insert a music CD in the album information and track names don't come in automatically.  When I try to manually get the information, I get an "User not registered for online use" message. 
    Request if I can be provided with some assistance on this. Importing CDs was no problem until I updated to iTunes 12.0.1.26 yesterday morning.
    Thanks.

    Same issue - windows 7.  Worked fine yesterday - updated to iTunes 12 and now it is broken and I get the "user not registered for online use" ERROR.  Seems like the latest "upgrade" broke GraceNote access.

  • Gateway error - Program not registered

    Hello,
    We were getting the following error while doing a "Connection test" of a TCP/IP RFC destination:
    LOCATION    SAP-Gateway on host gisrxx / sapgw00
    ERROR       program SBCX not registered
    It's an ECC 6.0 system.
    I found SAP note - - 353597 - Registering a RFC program
    I executed the following command as sidadm
    rfcexec -aSBCX -ggisrxx -xsapgw00
    But the command keeps on running on teh command prompt.
    And for that duration the RFC works.
    But after sometime the command ends and comes back to command prompt and the RFC doesn't work any more.
    Could you tell what needs to be done to resolve this issue?
    Regards,
    Gautam.

    Hi Gautam,
    Please run the program in background (Unix) or as a service (Windows).
    Please go through the following forum post. This should help.
    Run rfcexec as service on windows
    Br,
    Venky

  • RFC Error: Program not registered

    Hi,
    We are presently facing issue with our GTS (Quality) and Seeburger system RFC connection. While doing the testing we are getting error as below:
    ======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
    Transaction program not registered
    ABAP Programm: RSRFCPIN (Transaction: SM59)
    User: TESTUSER (Client: 202)
    Destination: SEEBURGER_RFC (handle: 2, , )
    Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
    CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
    Transaction program not registered
    DEST =SEEBURGER_RFC
    HOST =%%RFCSERVER%%
    PROG =BIS_ABC_202_DEV
    GWHOST =ABC.XYZ.STU.com
    GWSERV =sapgw15
    I have checked RFC connection is fine. Also production systems connection are working fine.
    Can anyone please help me out where to look in GTS or Seeburger to check about this issue and correct it.
    Thanks & Regards,
    Manish

    Hi Sunny,
    Thank you  for your suggestion, actually we have tried registration using rfcexec and it works fine.
    BTW, we have managed to solve this issue by de-activate the IDoc receive & send modules of websap component and activate them again.
    Thanks and Regards,
    Nick

  • Error 'Program not registered' while testing RFC

    Hi
    I have created a RFC with type T. When I am testing the same through SM59, I am getting error:
    Logon     Connection Error
    Error Details     Error when opening an RFC connection
    Error Details     ERROR: program <program name>not registered
    Error Details     LOCATION: SAP-Gateway on host xxxxxx / sapgw01
    Error Details     DETAIL: TP <program name> not registered
    Error Details     COMPONENT: SAP-Gateway
    Error Details     COUNTER: 6268
    Error Details     MODULE: gwr3cpic.c
    Error Details     LINE: 1694
    Error Details     RETURN CODE: 679
    Error Details     SUBRC: 0
    Error Details     RELEASE: 700
    Error Details     TIME: Tue Jan 27 00:56:55 2009
    Error Details     VERSION: 2
    Can anybody help me in this?
    Thanks in advance

    Something helpful related to this
    The program in the above error should be registered in the gateway for this connection test to complete successfully. The server program rfcexec is responsible for its registration on the gateway.
    To register the program login into the OS level as sudo su - <sid>adm and execute the following command.
    rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
    rfcexec is the server program name, the <program id> can be obtained from SM59, it is case sensitive and should match with the entry in SM59. The <gateway host name> and <gateway service> can be obtained from the transaction SMGW. When this command is executed it goes to a hanging loop.
    The connection will fail once this command is terminated or the user executing this command logs off
    To avoid this, instead of using the above mentioned command an entry should be made in the file saprfc.ini
    To do this, execute the following command
    sudo su - <sid>adm
    rfcexec u2013D<destination name>
    <destination name> is the RFC destination name in SM59
    So now we are done with registering the server program, but how do we check it is registered, once a server program is registered it is displayed in the Logged on clients in SMGW.
    In transaction SMGW choose GOTO-> Logged on clients. There should be an entry for the server program in the screen that is displayed with system type Registered_TP (which indicates that the program is registered)

Maybe you are looking for

  • My iPhone4 does not display under Devices in iTunes

    I don't know if my iPhone 4 got overheated due to the recent power failure, but I charged it the other day and have been trying unsuccessfully to connect to iTunes ever since.  My Mac does not recognize my phone - it doesn't open iPhoto or iTunes whe

  • HT1476 why wont my iphone charge from my new computer?

    My iphone 4s will not charge from my new computer any ideas?

  • CS4 no longer recognizes NEF files

    Is CS4 now obsolete?  If there is something I need to do to reinstall an updater or some such thing--easy peasy step by steps instructions would be appreciated for this granny--nothing that refers to roots (do you mean carrots?).  Thanks.  I hate to

  • Trying to download Premier Elements v8

    I purchased Premier Elements version 8 several years ago.  Just had to wipe my computer and start over, and while I can find Photoshop 8 (purchased at same time) download, I can't get Premier Elements 8.  Please help.

  • How can I install java on ipad air.

    I am trying to use the configurator on the BMW web site. I have Safari and Google Chrome browsers.