Import PO with GR based

Hello.
We are Going for Import PO.
We are creating the Import PO with Gr based Indicator. now Tax code is Zero.
Customs clearing account is seprate.. from that A/c we will pay the Customs amount.
So while doing the MIRO for Customs.(planned delivery cost from MIRO option), system will generate the Commercial exc Inv No.
So when i go for MIGO with ref to PO. then system will Popup the Commercial Exc Iv no then we will cancel from MIGO screen .
Then system will shown me the Full PO qty's BED ,ECS and SECess and AED... but iam capturing the MIGO partaily.... Excise base value also shwon in USD.....
Regards
sapman man

Hi there,
What i understood from your thread is you want to do the Excise invoice for partially and pay duties to the custom vendor for the partial quantity of goods receipt, for the same you can change the duty and the quantity while doing the MIRO trax. So the same data will flow when you will enter the MIGO screen and mention there the commercial invoice number.
For partial delivery check in your vendor settings, the GR based INV verification should be marked. For multiple currency check your settings in SPRO. The sytem defaults the same from vendor master.
Hope it helps
Regards
Sujoy

Similar Messages

ActiveSync with Certificate-Based Authentication

We are trying to setup ActiveSync with certificate-based authentication against Exchange 2010 SP2, but with no luck.
What has been done so far:
OWA over https works fine. A public, trusted certificate is in place.
Setup ActiveSync against this Exchange server: works fine, using user name/password.
Issued a user cert, signed with an internal CA, CA-cert successfully imported into al client devices.
Created a new OWA-site with cert-based authentication (just to make sure it works), imported user certificate into a mac, visit this OWA site - cert-based authentication works fine.
Now, with the configuration utility, created configuration profile with that user cert and an ActiveSync account, left password blank and chose the imported cert (p12) as authentication means.
After installing that last profile the device keeps asking for a password and refuses to synchronize. Logs on the server show error 401.2, so I assume iPhone is ignoring the cert and is trying to use password-authentication instead.
The devices tested were iPhone 3G with IOS 4 and iPad 2 with IOS 5.
Any help will be greatly appreciated.
Roman.

No-one with this experience?
We've done some network analysis (as much as was possible to decrypt) and could see, that the server sends an SSL-Alert (rejection?) to the client after the client presents the certificate.
That explains why the client falls back to password-authentication, but it does not tell us why the server rejects the cert (that is accepted perfectly when accessed from a browser) in first place.

How to pass credentials/saml token access sharepoint web service ex:lists.asmx when sharepoint has single sign on with claims based authentication

How to pass credentials/saml token exchange to the sharepoint web service ex:lists.asmx when sharepoint has single sign on with claims based authentication
Identity provider here is Oracle identity provider
harika kakkireni

Hi,
The following materials for your reference:
Consuming List.asmx on a claims based sharepoint site
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f965c1ee-4017-4066-ad0f-a4f56cd0e8da/consuming-listasmx-on-a-claims-based-sharepoint-site?forum=sharepointcustomizationprevious
Sharepoint Claims based authentication and Single Sign on
http://social.technet.microsoft.com/Forums/sharepoint/en-US/2dfc1fdc-abc0-4fad-a414-302f52c1178b/sharepoint-claims-based-authentication-and-single-sign-on?forum=sharepointadminprevious
Sharepoint Claim Based Authentication Web Service issuehttp://social.msdn.microsoft.com/Forums/office/en-US/dd4cc581-863c-439f-938f-948809dd18db/sharepoint-claim-based-authentication-web-service-issue?forum=sharepointgeneralprevious
Best Regards
Dennis Guo
TechNet Community Support

IPhoto imports photos with wrong dates even if the dates are fine on the camera

Hi!
When I import photos with iPhoto, sometimes it imports them with wrong dates, even the dates are fine on the camera. It puts dates such as 2032. Does anyone know how can I fix that. As far as I know there is no way to change dates of the photos.
Thanks!

well that is very confusing since if the date is correct on the camera it will be correct in iPhoto
and as to
As far as I know there is no way to change dates of the photos.
Try looking through your iPhto menus - two commands - adjust time and date and batch change time and date - asjust is used to correct incorrect dates like a comera setting - Batch change for missing dates like with scans
LN

Issue with form based Authentication in three tier sharepoint 2013 environment.

Hi,
We are facing issue with form based Authentication in three tier environment.
We are able to add users to the database and in SharePoint.
But we are not able to login with created users.
In single tier everything working fine
Please help , Its urgent ... Thanks in advance.
Regards,
Hari
Regards, Hari

if the environments match, then it sounds like a kerberos double-hop issue
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

I need to get back in touch with UK based technica...

Background - a few weeks ago I received help on the forum in connection with my modem re-booting, usually in the early morning. I got in touch with Bt Customer support who helped by getting the noise level back down but I still suffered from re-booting, consequent increases in snr and lower speeds. I switched from the HH3 to a Billion bipac 7700n router. This was a vast improvement. No more re-booting but occasional re-syncs instead - at least the snr and DSL speed stayed roughly at the same level. I did however want to eliminate the 4-5 re-syncs per day - a nuisance if you are trying to use the PC or streaming music when the connection drops. Customer support advised me to test the router in the BT test socket. Alas, when I looked inside my BT master socket I found that I hadn't got a test socket. Bt Customer support splendidly arranged for a BT engineer to come the next day to fit a test socket. This was just before Xmas.
With Xmas over, guests having gone and continuing to suffer from re-syncing, I connected the router directly to the new BT test socket. In the space of 9 hours there were 4 re-syncs.
I e-mailed Bt customer support an extract from the router's systems log to seek their help. Within minutes I had a call from an operator in BT India who put me through to their technical desk. Unfortunately the technical desk did not have my e-mail and did not seem very interested in the background to my issue. After an hour in the phone I spoke to a supervisor who explained that he could not take my problem further until I had tried a new HH3.
Well the HH3 turned up today. On connection my snr went up to 10db and the DSL speed down from 6656 kbps to 4344 kbps. Needless to say I have disconnected the HH3.
I should add that the BT engineer who fitted the new master socket said that in his view I needed a Broadband boost engineer and that he would put this in his report.
Advice on how to get back in contact with Uk based support would be welcome. I had been making good progress!
Solved!
Go to Solution.

Hi I suggest you contact the forum mods they should be able to get your problem sorted for you this is a link to them
http://bt.custhelp.com/app/contact_email/c/4951
they normally reply by email or phone directly to you within 72 hours
They are a UK based BT specialist team who have a good record at getting problems solved
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

What is the mean of using Portal with Role Based security as entry point

Hi Experts we have requirement of integration of Portal and MDM
I am completely new to the MDM. So please give me some idea , what is the meanin for following points.
1) Using the Portal with Role Based security as entry point for capacity and Routing Maintaince(These two are some modules).
2) Additionally , Portal should have capability to enter in to the MDM for future master data maintence. Feeds of data will need to be come from SAP 4.6c
Please give me the clarity of what is the meanin of second point
Regards
Vijay

Hi
It requires the entire land scape like EP server and MDM server both should be configured in SLD.
Your requirement is maintaing and updating the MDM data with Enterprise portal.We have some Business Packages to install in Portal inorder to access the functionality of MDM.
Portal gives you a secure role based functionality of MDM through Single sign on (login into the portal access any application) to their end users.
Please go through this link
http://help.sap.com/saphelp_mdmgds55/helpdata/EN/45/c8cd92dc7f4ebbe10000000a11466f/frameset.htm
You need to develope some custom applications which should be integrated into the portal to access MDM Server master data
The estimation involves as per your requirement clearly
Its depends upon the Landscape settings, Requirement complexity,Identify how many number of custom applications need to be developed
Regards
Kalyan

Problem with File Based replication in Weblogic Express 10

Hi,
          We have Web application (exploded war) file deployed on Weblogic Express 10, to a Cluster of three Managed Servers (all three on different physical machines).
          We are using File based session persistance in weblogic.xml
          We have a shared location for all the three servers where we will be sharing the Session data.
          When we start the application, its works fine and is very fast, but after sometime the application slows down.
          Troubleshooting the Issue we found that its a problem with file based replication. By using File based replication every user session is stored in form of directory inside shared directory. So after sometime thousands of directories are created inside the shared directory where the session information is stored. So when we access the application, its waiting for lot of time with Message Session Monitor .... (this is because its browsing through the shared session storage directory for lot of time for session information as it has lot of directories) and finally after a long time like 10 mins we get the Application Home Page.
          When we clean up all the saved sessions inside shared directory, the application works fine, But we will see the same sometime later may be after 3 or 4 hours when the shared session directory has lot of session information stored in it.
          Is there a way to clean up the saved session information on file system as soon as that user session is closed by using file based replication.
          We cannot used Inmemory replication as our Appl doesnt support it.
          Please advice as it is a major show stopper in our Production Mirror env.
          Weblogic Consultant

It is possible to reduce number of live session by configuring very low timeout-secs weblogic.xml. Default is 60 minutes.
          More details are here..
          http://e-docs.bea.com/wls/docs100/webapp/weblogic_xml.html#wp1071982
          Jayesh
          Yagna Sys

When importing photos with iBooks Gallery widget, is anyone aware of a technique for simultaneously importing the photo's description (or jpeg file name) and writing it into the iBook Author caption field for the imported photo?

When importing photos with the iBooks Author Gallery widget, is anyone aware of a technique for simultaneously importing the photo's description (or jpeg file name) and writing it into the iBook Author caption field for the corresponding imported photo? I have 4,800 stills to import and can't imagine it's necessary to copy and paste the description for each.

As always, feel free to use the 'Provide iBooks Author Feedback' menu item for features you'd like added in the future, etc.
http://www.apple.com/feedback/ibooks-author.html
As for AS, I'm not sure anyone has sniffed iBA's dictionary yet...google is you friend for hot prospects, I'm sure

When trying to import photos with iPhoto from photoshop.. won't let me keeps saying that the photos are already in the iPhoto library but they are not... need to fix this

When trying to import photos with iPhoto from photoshop... won't let me keeps saying that the photos are already in the iPhoto library but they are not

If you are using Photoshop from within iPhoto the following may help with the workflow. However, we do need to know the answers to the questions posed by Terence and Larry to be able to help you.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Screenshots are from PSE 10
Note 1: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
Note 2: editing a RAW file with either PSE or PS creates a new file which must be saved outside of iPhoto, i.e. the Desktop, and imported as a new photo into the iPhoto Library.

Creating a Form with Report based on View

Hi All,
I wanted to create a form with report based on two tables so:
1. I created a view (called COMBO) based on two tables
2. I then created a form with report based on the view
Everything seemed fine thus far until I tried to edit existing records - I got the error:
ORA-20505: Error in DML: p_rowid=2002082600001172, p_alt_rowid=REPATRIATION_ID, p_rowid2=, p_alt_rowid2=. ORA-01776: cannot modify more than one base table through a join view
Unable to process row of table COMBO.NB: REPATRIATION_ID is the primary key of the Repatriation table. The other table is Applicant.
& when I tried to create a new record - I got the error:
ORA-01776: cannot modify more than one base table through a join view
Unable to process row of table COMBO.Someone please enlighten me!
Kind Regards
Kamo
Edited by: Kamo on 2009/03/12 2:33 AM

Hello Kamo,
You need to create an 'instead of' (update/insert/delete) trigger on your view to process the inserts etc into the 'real' tables.
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-)

Open Item Import fails with a process_flag = -999 or -888

Problem description
============
The Open Item Import fails with a process_flag = -999 in
mtl_system_items_interface. This keeps the item from being imported into
mtl_system_items. The process_flag has to be set back to 1 to have the row(s)
reprocessed.
Solution
======
UPDATE mtl_system_items_interface
set transaction_type='CREATE'
where transaction_type=<'>
Commit;
Re run the Item Import it should go fine.
Regards,
Mehboob

Hi,
It looks like you have posted the same in below thread.
Item Import completed with Process_Flag = 31, 41 and 42
Any way if you have problem you can refer to below metalink notes.
NOTE:103869.1 - Item Attribute vs Template Attributes Using IOI
NOTE:106812.1 - Instructions for Running Item Open Import (IOI) Including Historical Revision Da
NOTE:109628.1 - FAQ for Item Import
NOTE:268968.1 - Understanding Item Import and Debugging Problems with Item Import
NOTE:458544.1 - Inventory Item Open Interface ITAR Template
NOTE:52746.1 - A Guideline to IOI Error Messages and Solutions
Thanks
Vishalaksha

Req import fails with POCIRM-24a: ORA-01400:

Req import fails with.
POCIRM-24a: ORA-01400: cannot insert NULL into ("PO"."PO_REQ_DISTRIBUTIONS_ALL"."D

Please post the details of the application release, database version and OS.
Req import fails with.
POCIRM-24a: ORA-01400: cannot insert NULL into ("PO"."PO_REQ_DISTRIBUTIONS_ALL"."DPlease follow the steps in these docs for details about the error.
Adding To Cart Delivers Error - ORA-01400: Cannot Insert NULL Into ("PO"."PO_REQUISITION_LINES_ALL"."DELIVER_TO_LOCATION_ID") [ID 580002.1]
FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12 [ID 296559.1]
Thanks,
Hussein

How do I import movies with an AVI format taken with a digital SLR?

How do I import movies with an AVI format taken with a digital SLR?

If you cannot import using File Menu > Import Movies... You'll have to convert them on a Mac.
You will need to use a free app called MPEG Streamclip from Squared 5.
Basically, you drag the .mts file into MPEG Streamclip. Then use FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your codec. And it will save out to a .mov file and iMovie will edit this format like there was no tomorrow

Importing issues with Final Cut Pro X. Green flash and twitches while play back

Hello, I'm having some importing issues with Final Cut Pro X and I can't find any solution whatsoever. Perhaps my importing settings are wrong?
Anyways, I've done a lot of recordings on eye TV and HD PVR with some videos that are about 3 hours long. I exported them into H.264 files, which turns them into mpeg-4 files with AAC audio. Then I import them into final cut pro X and I notice it takes a long time for them to render the videos and I notice that there are some green screens and twitches while I play through the video.
Here is a screenshot of the green screen that I'm talking about:
[URL=http://imageshack.us/photo/my-images/688/screenshot20130409at338.png/][IMG]http://img688.imageshack.us/img688/4537/screenshot20130409at338.png[/IMG][/URL]
Could it be my 2 video graphics card that is causing this kind of issues? Or is there any solution to fix this?
In the past, I've used iMovie 09 and it worked out perfectly. However, the new iMovie 11 is terrible because it automatically optimzie my 3 hour long videos into making the importing process to (144 hours long to import). Is there any way to get iMovie 09 back or am I stuck on dealing with this Final Cut Pro X issues?
More information:
My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fps

My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fps

Import PO with GR based

Similar Messages

Maybe you are looking for