Import Portugal - Specific  forms for financial statements

Hi
in SAP Service Marketplace, using the quick link globalization for *Portugal* I found the following information:
Import forms 0PT-ACTIV-01, 0PT-PASSI-01and 0PT-RESUL-01 from client 000 to your development client. To do this, in Customizing for Financial Accounting, choose General Ledger Accounting ® Information System ® Drilldown Reports (G/L Accounts)  ® Form ® Import Form from Client 000.
I have tried to import forms 0PT-ACTIV-01, 0PT-PASSI-01and 0PT-RESUL-01 from client '000', but the forms are not available.
Does anybody know how I can get those forms or if I am doing anything wrong?
Cheers

Bruno,
Thanks for your answer.
Yes I checked note 353539 and did the steps you mentioned above.
When executing 'Import Form from client 000u2019 the system shows me 3 options:
- Reporting for Table FAGLFLEXT
- Payables According to GL acc
- Receivables According to GL acc
I selected the first one and then the following forms appeared
Choose objects to be transported
Form                 0SAPBLNCE-01              Fin. Statement: Actual/Actual Comparison
Form                 0SAPBSPL-01               Fin. Statement: Actual/Actual Comparison
Form                 0SAPBSPL-02               Fin. Statement: Plan/Actual Comparison
Form                 0SAPFS10-01               Transaction Figures: Account Balance
The forms that I am looking for are not available. Do you think that am I doing something wrong? Have you checked in your system that Portuguese forms are available? What version of SAP are you working with? I am at ECC500
thanks you very much

Similar Messages

  • Hierarchy INT does not exist for Financial Statement item 0glaccext

    Hi,
          I am facing a problem while executing the Standard Business content "Cash Flow statement" query. I am getting the message "Hierarchy INT does not exist for Financial Statement item 0glaccext".
    I am not able to find this Hierarchy in the "avaialble Hierarchies from OLTP". I think this is a standard SAP Hierarchy.
    Any thoughts on how to resolve this issue

    John,
    You can define FSVs for a specific chart of accounts, for a group chart of accounts, or without any specific assignment.
    In your case, double-check whether you are running the report for the same CoA assignment that you have defined your FSV for in the first place.
    As somebody's mentioned earlier, these reports are made using Report Painter (GRR1 / 2 / 3, etc.). Seems FSV = INT has been fixed in these reports for your system. You'll have to edit these reports (using GRR2) and the correct FSV.
    Regards
    Gulshan

  • Which info object should be used for Financial statement line (BPS and BCS)

    Hi experts.
    A rather easy and straightfoward questions for someone out there.
    In BPS as we know, we use the info object '0SEM_POSIT' (account groups, or financial statement line) to summamrize and store amounts from groups of accounts or for example data from COPA's value fields, and which is already an attribute of the info object '0ACCOUNT'.
    I am told that there is another BCS related info object called '0CS_ITEM' that serves the same purpose, and uses it for the same reason for the purpose of consolidations.
    We'd obviously like to use just the one of these info objects because of planning and reporting.
    Can someone out there with knowledge in BCS recommend which one to use, and from their experience in the past how they combined the use of both (if you in fact did use both).
    Also, is it true that in BCS you cannot use a two characteristic BW hierarchy for consolidations, and it can only consolidate a one characteristic BW hierarchy?
    Thanks dearly

    Hi Eugene,
    I kind of understood what you said, but just incase, let me explain my situation a little clearer. In BPS I'm using 0SEM_POSIT for two reasons:
    1) To create hierarchy based on 0SEM_POSIT info object, and making each node postable. This is because on this project we don't plan at account level. Only at a kind of account group/financial statement line level. So each node is postable so that they roll up to the higher levels.
    2) I will have 0SEM_POSIT as an attribute of 0ACCOUNT (which is standard delivered as an attribute in BW). This will ensure that I derive the actuals at that the same level as the planned. This is required for two reasons:
                               a) I can have the actuals as comaprison column in the Planning
                                   layout.
                               b) I can report on the Actuals vs. Plan at the postable node
                                   level in BW queries.
    So having explained this, what I understood from your explanation is:
    a) I can continue to 0SEM_POSIT as my info object for my postable node hierarchy, and
    b) I can also use 0CS_ITEM as a consolidation unit specifically for BCS only.
    So what I really didn't understand is:
    1) your explanation of the mapping of 0SEM_POSIT to 0CS_ITEM, and what this mapping actually does. For example does 0CS_ITEM derive the values from 0SEM_POSIT because of this mapping? Can you explain this a bit? Is Datastream a tool in BCS by which BCS readinf financial data from other components?
    2) Can BCS use a 2 characteristic postable nodes hierarchy as a consolidation unit? For example, if I create ONE hierarchy using 0SEM_POSIT, and 0ACCOUNT. Both will be postable at any level of the hirarchy.
    Can BCS consolidate using this 2 characteristic hierarchy structure? OR, must it use 0CS_ITEM info object?
    3) How does both 0SEM-POSIT, and 0CS_ITEM co-exist together, in terms of planning, consolidation, and reporting. For example if I report using the 0CS_ITEM hierarchy, then I will not be able to read plan data, because plan data is posted on the 0SEM_POSIT? and vice versa......? This question kind of ties in with 1).
    Sorry for the long message, but I wanted to make sure I explained it better.
    Thanks for your help

  • Adding of new field in dynamic selection for financial statements

    Hi ALL,
    I want to add Trading partner in dynamic selection fields of financial statement report at document level not yet GL master level: S_ALR_87012284 - Balance Sheet / Profit and Loss Statement .
    Can any one tell how to proceed?
    I have referred notes: Note 188663 - Enhancing selection views and dynamic selection.
    But exactly I am unable to find which logical database has to be given?
    regs,
    ramesh b

    Hi,
    If you want to add extra field in your report you can do the setting in Layout selection. If it is not available kinldy check any SAP notes available or not. Otherwise do Zreport with your ABAPer.
    Regards,
    Mohan.

  • Importing Crystal Report layout for customer statements

    Hello,
    I have imported a crystal report layout to use for the customer statements when running them from the ageing report.  The problem is even if we only select one business partner in the ageing report, when we print preview the statement it displays statements for all business partners - this is because in the crystal report there are no parameters.  I know that when you import a layout like this for other documents you need to use for example, {ORDR.DocEntry}={DocKey@} as the parameter however the customer statements don't have a docentry.  When I look at the system statement layout (collection layout), when you run the report you get an ADO.NET (XML) connection prompt.  Is it possible to use the crystal layout i have for the customer statements but for only the customer(s) showing on the ageing report?
    Many thanks,
    Kate

    So just to make it clear,
    you want an overview of open invoices from 1 customer.
    If so, try this in crystal reports :
    Create a parameter field (field explorer)
    Name : CardName
    Type : String
    Value : Static
    do not select a value field (none)
    press ok.
    Select expert
    Create new
    Starts with
    type this : {?CardName}
    press add
    Click formula editor and make it look like this :
    {OINV.DocStatus} = "o" and
    {OINV.CardName} startswith {?CardName}

  • GL Reconciliation process in Infomratinca for Financial analytics

    Hi Guys,
    I am implementing OBIA Financial Anlytics for the first time, need your valuable input for below issue.
    I am trying to understand the GL reconciliation process withing OBIA Fianancial Analytics. As per the document which Oracle has given, I understood that for this process to happen we need GL account mapping to Group_Account_Num (Using file_group_acct_codes_ora.csv, file_group_acct_names.csv, file_grpact_fstmt.csv files).
    According to the configuration guide;
    By mapping your GL accounts against the group account numbers and then associating the group account number to a Financial Statement Item code, you have indirectly associated the GL account numbers to Financial Statement Item codes as well. This association is important to perform GL reconciliation and to ensure the subledger data reconciles with GL journal entries.
    Also it has given one mapping for Financial Statement Item Codes and Base Fact tables. Now my understanding says, all the detail entries of GL AP should get recorded into to W_AP_XACT_F table, and if it is a GL AR entry it should get recored into W_AP_XACT_F and likewise for COGS, REVENUE, TAX and OTHERS.
    But currenly in our system, I can see all the entries (AP, AR, COGS, REVENUE, TAX and OTHERS entries) are there in all detail table (W_AP_XACT_F, W_AR_XACT_F, W_GL_COGS_F, W_GL_REVENUE_F, W_TAX_XACT_F, W_GL_OTHER_F table.
    Can anybody knows if this is correct behaviour or I am doing some mistake in the configuration.
    Thanks in Advance,
    Kashi

    you need to configure those three files to get the data in to BI and report them.
    file_group_acct_codes_ora.csv : you need to pull all your natural GL accounts from EBS and feed them to this file. this file specifies each gl account and its behavior like whether it is a Payable entry or Receivable or Cash or PPE etc. so that you can view the data in payable, receivables etc dashboards with appropriate group totals.
    the group codes you define here like AP, AR, CASH, etc must be defined in file_group_acct_names.csv, which is master file for Account groups.
    file_group_acct_names.csv: This defines master set of group names you are using in your organization like AP, AR, CASH, PPE etc. these groups intern tagged to a financial statement codes like Revenue, TAX etc. so that you can find what is the total revenue or tax or AP etc for a specific period for a business unit.
    file_grpact_fsmt.csv: This a master file containing Financial statement item codes like Revenue, Tax.
    file_group_acct_codes_ora.csv >-- file_group_acct_names.csv >--file_grpact_fsmt.csv
    (GL ACC NUM) (GROUP ACC NUM) (FSTMT ITEM CODE)

  • Can S_PLO_86000028 Financial Statement report generate Cost-center report?

    Dear Experts,
    I've tried with S_PLO_86000028  Financial Statement report and it could generate report based on Profit Center but when I tried with Cost Center, it show no record.  Can this report generate cost center wise report?
    regards,
    Abraham

    Hi Saga,
    S_PL0_86000028 is a new FI report  for Financial Statement, created by tool Report Painter with tcode FGI1 (Create Drill-down Report).
    For adding new columns, I think we can modify the form it used (0SAPBSPL-01)
    It's not a good idea to copy it to z-program 'coz I still struggle with it and doesn't work well.
    Solaris.

  • New GL and Impact on BI Financial statement reports

    Dear All,
    I would like to know if and how the finacial statment reports  would be affected by using the new GL extractor 0FI_GL_14. New GL is being implemented on ECC,  hence the change in extractor in BI.
    Is there a standard cube that can be used for Financial statement reports(Balance Sheet comparision, BS by PC,P&L reporting by PC) for New GL.
    Currently we are getting our financial statement reports out of a Virtual cube which is based on a function module Module:RS_BCT_FIGL_DATA_GET_VC1.
    *Our current extractor for FIGL is 0FI_GL_4 .
    Appreciate your Input on this .

    Hi,
    You will find all the details here:
    http://help.sap.com/saphelp_nw70/helpdata/EN/49/5700570223413085021a8b4ef1087a/frameset.htm
    -Mayuri

  • Financial statement  version:functional area

    Hi,
    I created a financial statement  version with functional area and run it(S_PL0_86000032 ) , most items are correct, however, the item which assigned function area always 0, this means that system can not get any data via function area. would anyone help me?
    Rgds,
    Wubin

    Hello
    If you want to define a financial statement version with functional areas, these functions are limited. You cannot use the following functions:
            Balance-Dependent Display
    You cannot display functional areas dependent on the balance, that is, assign them to a different item dependent on the balance.
    ·        Debit/Credit Shift
    You cannot define items to which you have assigned functional areas as debit/credit shift items.
    ·        Check for Completeness
    You cannot use the check for completeness for financial statement versions with functional areas.
    You also have to carry out the following additional activities:
           1.      When you enter the general data, set the Functional area permitted indicator.
    You then have the option of assigning either accounts or functional areas to an item in your financial statement version.
           2.      Assign the required functional areas or functional area intervals to your P&L items
    Before setting the indicator please go through this help link
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/b5/688b8ea30d11d39759006094b969cf/frameset.htm
    regards

  • Financial statement in 5.0

    Hi,
    Is there any method to get Financial Statements (as Balance Sheet & Profit and loss statement) in SAP 5.0 Hyperion situation?
    Thanks & Regards

    Hi Divya
    The transaction code for financial statement in ECC5 Thru Menu
    Accounting->Financial Accounting-> General Ledger-> Information System
    ->General Ledger Reports (New) ->Balance Sheet/ Profit and Loss Statement / Cash Flow ->General ->Actual/Actual Comparisons ->S_ALR_87012284 - Financial Statements
    Transaction code  S_ALR_87012284 (command window
    regards
    Suresh

  • Financial statement consolidation

    Hi,
    Is there a sap standard report for financial statement consolidation for the following format (that would show the head office and subsidiaries in the column)?
                                       HO             Subsidiary1            Subsidiary2               Total
    Asset
      xxx                           xx                    xx                            xx                        xxx
      xxx                           xx                    xx                            xx                        xxx
    Liabilities
      xxx                           xx                    xx                            xx                        xxx
      xxx                           xx                    xx                            xx                        xxx
    Equity
      xxx                           xx                    xx                            xx                        xxx
      xxx                           xx                    xx                            xx                        xxx
    And are there also sap standard report for notes to financial statements schedules like Cash, Inventories, COS, Gen and admin exp, etc.
    Thanks and regards,
    David

    HI Manohar
    there is separate concept called ECCS. Enterprise Controlling and Consollidation System, u have to go through that configuration. U can not Consolidate just with Group Chart of Account as Fiscal Year is different.
    Satish

  • Financial Statement Version - Finland

    Hi
    Does anyone know where to locate the correct legal structure for Finacial Statement Version for Country Finalnd?
    We have no SAP Delivery data in the system f

    Hello,
    There is no standard format for financial statement. This may differ business to business based on the legal requirement.
    If you are in FINLAND, check out any of the available financial statement version from the web. It is the business responsibility to provide you the format. It is not that something that format can be given. Once you have created the financial statement version from other source, but if it does not suit business requirement, then you need to remodify your configuration.
    Regards,
    Ravi

  • Financial Statement Verion

    Hi Experts,
    Can somebody tell me, where we can configure Rounding Off for Financial Statement Verion as I need to do this task as per revised Schedule VI....
    Thanks in advance
    Mumfico
    Edited by: mumfico on Mar 15, 2011 9:09 AM

    Hi,
    There is only a rounding under Scaling in Selection screen, tab "output control"
    The documentation reports following:
    Scaling
    The output amount can be controlled using this parameter. The default value 0/0 means that the amounts are output in the right currency and in full length.
    The entry 3/1 would mean that the amounts would be output in thousands with one decimal place.
    hope, this helps.
    Regards
    Hein

  • Reg 1099 forms for state specific

    For 1099 forms in the HR module, in particular state specific forms, does SAP update the standard form every year if they change, or does a customer need to create a custom form and update the form themselves?

    Hi Rama,
    You will have to create the record for State Manually. Create the record for every State where your Retiree resides.
    You can copy the layout of HR_F_1099R_TAPE and then create or add another record into it.
    Arti

  • Define read-only authorization for specific field(s) on a form for 11.5.9

    Dear all,
    Can you pls let me know how is it possible to define read-only authorization access for specific field(s) per responsibility / user on a form in 11.5.9?
    For example I want to protect the item master file by assigning for example to users with responsibility buyer authorization to modify the buyer information but to have read-only only authorization on other sensitive fields such as make/buy flag, expense accounts, etc
    Through UI Modeller I have only managed to make specific fields on specific forms invisible, or whole tabs invisible, to specific responsibilities but this does not cover my needs as I want them to be able to view the data of the fields but to not be able to update them

    Arun,
    Almost but not quite.. The example you've given has the person VO at the top level which includes all the id's (City, State etc). My use case is slightly different.
    query 1
         select org_id, OrgName from x;
    query 2
         select emp_id, emp_name from y where org_id = x.org_id
    query 3
         multi-table join (approx 9 tables) to retrieve depts associated to employee
         where org_id = x.org_id
         and emp_id = y.emp_id
    Rather than using LOV's would it be better to create VO's and pass in the bind parameters at run time?

Maybe you are looking for