Import tif files as titles acting weird and wrong

I'm a noob to iMovie so thanks for the help. I am importing ordinary tif files as titles and when I playback the titles, visually they do this weird "swelling" and off-centering. There should be a simple dissolve to each frame to make a title build. All the tifs, which are spot-on registered out of PhotoShop, shift around and do this weird "swell" and aren't smooth at all. What gives?
Thanks!

KingCormack wrote:
... I am importing ordinary tif files as titles and when I playback the titles, visually they do this weird "swelling" and off-centering. ...
iM is set to add a Ken Burns effect to any added still.
you can switch-off this behavior in your Project's setting, Apple-J
select your still/clip in the Project Window, select the Crop Tool, select 'fit'.
and Welcome KC to the  boards …

Similar Messages

Hey, I have Final Cut Express 4.0.1 and a JVC everio camera, whenever i try to import my files to FCE via "Log and transfer", it just doesn't do anything, as if FCE doesn't know the camera is there, please help !

Hey,
I have Final Cut Express 4.0.1 and a JVC everio camera.
Whenever i try to import my files to FCE via "Log and transfer", it just doesn't do anything, as if FCE doesn't know the camera is there,
please help !

FCE 4.0.1 can only capture DV/HDV which is produced by cameras using Mini-DV TAPES and cameras shooting AVCHD which is a high definition format.
If your camera shoots standard definition on Memory Cards, DVDs or Hard Drives it will not work in FCE.
What is your camera's exact model name and number?

My imported avi file plays in slow motion and staggers. what do i need to do to correct ?

My imported avi file plays in slow motion and staggers. How do i fix this ? I am newbie, just started AE but pretty ok with Photoshop. its AVCHD , 50 frames per second

You can update the latest drivers for Nvidia Card.
Try to run composition panel at a lower resolution .
Refer to this link .

Premiere Elements 13 has stopped importing MOV. files. Quicktime is installed and working

Premiere Elements 13 has stopped importing MOV. files. Quicktime is installed and working.

Nowconfused
I tried to get background information on the video from your camera but all I could find so far is that the camera is probably recording
1080p (1920 x 1080 @ 29.97 or 30 progressive frames per second. What are you (manually) or the program (automatically) setting as the project
preset to match the properties of your video source. See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio even if the fields look grayed out.
How are you importing the files into the Premiere Elements 13 project - with the Add Media/Files and Folders/Project Assets from a computer
hard drive location or are you making a USB connection between the camera and computer/Premiere Elements 13 and using Add Media/Video ..../Video Importer? Could you possibly have changed the way you are importing the files into a project?
Would it be possible for you to send a small sample of one of these .mov files that will no longer import? Maybe in a Dropbox link that you include in a reply?
Do you have any of the older files still available - the ones that did import at one time? If so, will they still import into a project or do they now not import?
More later.
Thanks for the follow ups.
ATR

Importing .tif files in indesign CS2

Hi all!!
If there are 200-300 pages in Indesign and if I wanted to import the pages in .tif extension to Indesign,I am currently using the Adobe's ImageCatalog.jsx script.But I have all the pages in the server foler i.e the 'W drive is the server drive and it does not show up in the dialog box when the script is run using ExtendScript toolkit. Can anyone help in changing the code below to add the server drive in the dialog box so that I can access all the pages in that drive.I would be grateful if anyone could help me in fixing this.
Thank You
Krishna
Here's the ImageCatalog.jsx script for CS2:
Olav Kvern, "Importing .tif extension files to IndesignCS2" #6, 19 Jul 2007 11:24 am

Please see above for what I have selected from the media panel.
In terms of the 'PDF Interactive export dialog' I am not sure what you mean, could you please talk me through this?
This is the instructions that I have been following http://helpx.adobe.com/indesign/using/dynamic-pdf-documents.html#create_interactive_docume nts_for_pdf
However, where it says
"Buttons And Media
Select Include All to allow movies, sounds, and buttons to be interactive in the exported PDF file. Select Appearance Only to include the normal state of buttons and the video posters as static elements."
I cannot seem to find this menu, the only one I can find is Buttons & Forms and when I open this all of the options are graded out. Please see the screen grab below...

Phostoshop CS4 + FCP Integration - Importing .TIF files...

I made the upgrade to CS4 and am trying to pull in some .TIF files that I had either created, converted, or were sent to me. THe originals are coming either from Adobe Illustrator CS3 files or Adobe Photoshop CS3 files.
For whatever reason I cannot get Final Cut to accept my .TIF files. I have tried adjusting several settings and keep messing with it, but it keeps giving me the error message:
File Error: 1 file(s) recognized, 0 access denied, 1 unknown
What should the correct color settings be in Potoshop in order to correctly import .TIFs? Should I keep the embedded color profiles? Any other settings that I should tweak in order to properly pull these in. Does this have anything to do with my recent switch from CS3 to CS4?
My FCP project is HDV1080p30 BTW, if that makes any difference.
THANKS!

Could it be that the .PSD files were created in earlier versions of Photoshop?
I would have thought that a newer version can always open files created in an earlier version. Problems typically occur, trying to open files created in a newer version on older software, due to new features not being present.
If you dont have to animate individual layers, perhaps using the "Merge Visible..." (if you have transparency) or "Flatten Image" commands in Photoshop could be used.
Could it be that the new version of PS somehow handles layers differently? Perhaps your files were updated to that format when you opened them.

I have used lightroom for years on my PC and just installed it on my new iMac. I cannot import NEF files from iPhoto or from my Lacie hard drive into Lightroom. I have tried Lightroom Help but still cannot import NEF files. What am I doing wrong?

I have always used Lightroom with a PC and now have installed Lightroom 3.6 on my new iMac. I cannot import raw (NEF) files from iPhoto (or from my Lacie drive for that matter into Lightroom. I have tried Lightroom Help to no avail. How do I import NEF files from the iMac into Lightroom?

If they are the same nef files that you were importing into your PC, see if the reason is an error message like the thread above this one. Permissions issue.

Flash CS4 does not allow importing .tif files

Hello, anyone know why Flash CS4 does not allow import .tif a few days to date. I worked very well and now he tells me something of a Swift 3D importer, but have not installed or that or any other programs lately, I also have QuickTime.
The truth is very strange that no permits, hopefully someone knows of that is due. Need help, please.
Thanks

That's exactly what I'm doing (since using 1 Graphic Symbol instead of 2). In my current Flash work I have a bunch of Classic Tweens and those all worked. But when I try a Graphic Symbol that's a line of text, then it suddenly doesn't work (the timeline does change color with an arrow, but the text stays the same size with the exception of the second keyframe where it promptly turns into what's in that one). I even tried a random Classic Tween just now making a rectangle grow to make absolutely sure I wasn't doing something wrong, and that one worked immediately no problem.
And never mind that. Now it does work. I suppose I indeed did something wrong. Thank you very much for the help!
Say, one small question: does Adobe Flash have a function to properly set video clips after each other in one big video clip? Or do you have to manually count the frames and add the video clips at the proper frame yourself?

How do you change a color on an imported tif file in adobe illustrator?

Hi, I have put together an illustrator file by importing various tiffs and putting them togetherfor a figure in a scientfic journal. I have to change the red in all my images to magenta for those that are colorblind. I was hoping someone could help me figure out how i can change red to magenta in illustrator off of imported tiff files (not objects that were created in illustrator - i know how to do that). I have tried to get the answer from technical support over the phone but they keep disconnecting me? Can anyone help?

Thanks for the input. I do know how to do it in photopshop and am trying to export my files into layered .psd-s but the layers don't always export perfectly and the journal needs me to send a layered file (doesn't matter .ai or .psd). The figure should have been put together in photoshop originally, but unfortunately it wasn't. The Phantam CS seems interesting but you alos have to buy it and I don't want to have to purchase something to do it. Especially since Adobe says there is a way to do it. Just don't know what that way is....

Apps acting weird and doing actions against my will.

Hello I'm here to write about the latest issue I got on my iPhone 5c, while I was writing a message my app started acting weird. Successively I moved to another app and it did the same thing so I suppose it's a general problem.
Ex: while I write my iPhone clicks and opens other options on the page by itself.
While I scroll down on tumblr app it clicks other options by itself like unfollow, changes pages, as if I clicked those options but I didn't.
Like on whatsapp for instance, while I write it opens the user id, the user info, shuts the keyboard down as if I did it but I didn't at all.
Also now while I'm here writing this sometimes it acts as if I clicked on he top bar and opens the http:// of this page, but I didn't.
While I'm on drafts/notes app it does the same, I wrote a long message last night hoping it would help being that out of an app which needs connection but it happen again; while I was about to finish it clicked the delete button by itself and everything disappeared.
Also now again, I luckily copied this email line by line in order to prevent it from delete everything I wrote again.
I just need to know if there's something I can do or if I should just take it back to an apple store since it's still pretty new..

Hi there NellieKlash,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
-Griff W.

Even after the Mavericks Mac Mail update and showing my "All Mail" folder, Mail.app is still acting weird and slow. Any further suggestions?

Even with the recent Mac Mail Mavericks update and showing my "All Mail" Gmail folder, Mail.app is still acting funky and slow. Any further suggestions for getting Mail.app back to it's pre-Mavericks state?

Your description of the problem is rather vague, but I'll take a guess at what you mean.
Quit Mail if it's running. Back up all data.
Triple-click anywhere in the line below on this page to select it:
sqlite3 L*/C*/*.mail/*/L*/*/*/C*.db vacuum; sqlite3 L*/M*/*/*/E*ex vacuum
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
You should see a new line ending in a dollar sign (“$”) appear below what you entered. If not, press return. You can then quit Terminal and relaunch Mail. Test.
Note: This procedure will have no effect unless you quit Mail when you begin.

Iphoto 11, 9.1.3, acting weird and shows events empty while working on them...

While I'm working on photos in any given events i often toggle between info view and edit view. also open and close images randomly using spacebar. sometimes, the photo will simply disappear when toggling from info to edit and then when minimizing it and going back to event view… the event is shown as empty!
this is happening randomly at different times with different events. i've already rebuilt the library using iPhoto library manager and this is happening with the new library as well.
also, as i mentioned in another thread, its not loading my videos to iPhone 4 even when 'include videos' is checked in itunes.
Neerav

Thank you. I have been waiting for someone else to report this issue for a couple weeks. I had this start happening in 9.1.2 and submitted feedback and posted on forums, but no one seemed to experience the same issue. This only happens on one of my Macs. A late 09 iMac. I rebuilt and vacuumed the hard drive. Deleted preferences and repaired permissions. Started a brand new library. Nothing solved it. Finally I completely deleted every file associated with iPhoto 11 and reinstalled it, then manually rebuilt my library. Yet the issue persists.
I really hope Apple fixes this in the next update. It is annoying because I use iPhoto at work and often need to show people photos, then iPhoto does this and I start to look like an idiot as I exit and re-enter the event, trying to force the photos to reappear.
Thank you for letting me know I'm not alone.

Can't import .tif file

iPhoto won't import a large tiff file of a pano, one about 50K x 3K pixels, 852MB. Wondering if the problem is that it's a tiff, or the file size, or the megapixel count, or something else?
It was saved in photoshop with no image compression, 'interleaved' pixel order, macintosh byte order, and 'discard layers, and save a copy'.
I'm googling but having trouble finding anything clear and concrete about tifs and iphoto. Using OS X 10.5.6 and iPhoto '08 7.1.5 and Photoshop CS3.

Thought I had it figured: maybe 30,000 pixels in one dimension was a problem for iPhoto as it is for photoshop--as best as I can tell, that is the limit in photoshop for refusing to save files as jpegs (if offers only tif, large document format, or one other for images over that size in one dimension).
To test this idea, I took the large pano, opened the full sized tiff file in photoshop, made files of 29999, 30000, and 30001 pixels max dimension. The first two were saved directly as jpegs, the third as a tiff file that was opened in preview and saved as a jpeg from within preview, which does not appear to have a size limit as does photoshop.
Then I tried to import 29,999.jpg (17.8 MB), 30,000.jpg (17.8 MB), 30,001.jpg (20.2MB) and 30,001.tif (322MB) into iPhoto.
Guess which imported successfully?
30,001.jpg and 30,001.tif.
I am so confused!

I am not getting required output after importing xml file having HTML tags, MathML and Latex code

I created well formatted xml having html tags, MathML code and Latex code inside
XML with sample latex
<question>
 8. In this problem, <Image style="vertical-align: -9pt" title="5a\frac{7b}{3}" alt="5a\frac{7b}{3}" href="http://www.snapwiz.com/cgi-bin/mathtex.cgi?%205a%5Cfrac%7B7b%7D%7B3%7D%0A"></Image> and <Image href="http://www.snapwiz.com/cgi-bin/mathtex.cgi?%207b%5Cfrac%7B5a%7D%7B3%7D" style="vertical-align: -9pt" title="7b\frac{5a}{3}" alt="7b\frac{5a}{3}"> </Image>are both mixed numbers, like <Image src="http://www.snapwiz.com/cgi-bin/mathtex.cgi?%203%20%5Cfrac%7B1%7D%7B2%7D%20=%203.5" style="vertical-align: -9pt" title="3 \frac{1}{2} = 3.5" alt="3 \frac{1}{2} = 3.5"></Image>. The expression <Image style="vertical-align: -9pt" title="5a \frac{7b}{3} \ \times 7b \frac{5a}{3}" alt="5a \frac{7b}{3} \ \times 7b \frac{5a}{3}" href="http://www.snapwiz.com/cgi-bin/mathtex.cgi?%205a%20%5Cfrac%7B7b%7D%7B3%7D%20%5C%20%5Ctimes %207b%20%5Cfrac%7B5a%7D%7B3%7D"> </Image>is equal to which of the following choices? 
</question>
XML with sample html tags
4. Examine the expression 3k2 + 6k - 5 + 6k2 + 2.When it is simplified, which of the following is the equivalent expression?
XML with sample MathML tags
5. Find the vertex of the parabola associated with the quadratic function <math xmlns="http://www.w3.org/1998/Math/MathML"><mi>y</mi><mo> </mo><mo>=</mo><mo> </mo><mo>-</mo><msup><mi>x</mi><mn>2</mn></msup><mo> </mo><mo>+</mo><mo> </mo><mn>10</mn><mi>x</mi><mo> </mo><mo>+</mo><mo> </mo><mn>4</mn></math>
 <math xmlns="http://www.w3.org/1998/Math/MathML"><mfenced><mrow><mo>-</mo><mn>5</mn><mo>,</mo><mo> </mo><mn>69</mn></mrow></mfenced></math> 
 <math xmlns="http://www.w3.org/1998/Math/MathML"><mfenced><mrow><mn>5</mn><mo>,</mo><mo> </mo><mn>29</mn></mrow></mfenced></math> 
 <math xmlns="http://www.w3.org/1998/Math/MathML"><mfenced><mrow><mn>5</mn><mo>,</mo><mo> </mo><mn>69</mn></mrow></mfenced></math> 
 <math xmlns="http://www.w3.org/1998/Math/MathML"><mfenced><mrow><mo>-</mo><mn>5</mn><mo>,</mo><mo> </mo><mn>29</mn></mrow></mfenced></math>
None of the above works fine after importing xml to Indesign document/templete, it is not renderting equivalent out instead it is showing the same text inside tags in the Indesign document.
I have lot of content in our database, I will export to XML, import to Indesign, Indesign should render required output like what we see in the browser and export the output to printed format.
Import formated XML to indesign --> Export to Quality Print Format
Can any one guide me and let me know whether it is posible to do with Indesign, if so let me know in case if I am missing anything in importing xml and get required output.
Thanks in advance. Waiting for reply ASAP.

Possibly your expectations are too high. ... Scratch that "possibly".
XML, in general, cannot be "rendered". It's just an abstract data format. Compare it to common markup such as *asterisks* to indicate emphasized words -- e-mail clients will show this text in bold, but InDesign, and the vast majority of other software, does not.
To "render" XML, HTML, MathML, or LaTeX -- you seem to freely mix these *very* different markup formats, unaware of the fact that they are vastly different from each other! -- in the format you "expect", you need to apply the appropriate software to each of the original data files. None of these markup languages are supported natively by InDesign.

Import QTVR Files into Corel Painter 11 and export back out to QTVR?

I received a QTVR File and imported it successfully to corel painter 11 to paint some changes into the frames and I then wanted to export the frames (512 total) back to the QTVR format. Corl painter 11 allowed me to export files as QT, but I did lose the QTVR movie controller. When I tried to go to movie properties in QT pro Version 7 it does not allow me to change the movie properties back to QTVR movie controller. Anyone have any suggestions? I do need to be able to paint in the frames in a digital paint program and then export back out.
Thanks,
Fumarole

can you give me an example of what you are talking about as I 'm new to powershell... and I kind of understand but not sure the syntax of what you said
Sure, here's an example based on your final data:
input.csv:
Period,Time,Date
p1,t1,2016-01-11
p1,t1,2017-01-11
p2,t2,2016-02-11
p2,t2,2017-02-11
p3,t3,2016-03-11
p3,t3,2017-03-11
p4,t4,2016-04-11
p4,t4,2017-04-11
p5,t5,2016-05-11
p5,t5,2017-05-11
$p1,$p2,$p3,$p4,$p5 = @()
Import-Csv .\input.csv | ForEach {
If ($_.Period -eq 'p1') {
$p1 += @($_)
ElseIf ($_.Period -eq 'p2') {
$p2 += @($_)
ElseIf ($_.Period -eq 'p3') {
$p3 += @($_)
ElseIf ($_.Period -eq 'p4') {
$p4 += @($_)
ElseIf ($_.Period -eq 'p5') {
$p5 += @($_)
$p1 | Export-Csv .\p1.csv -NoTypeInformation
$p2 | Export-Csv .\p2.csv -NoTypeInformation
$p3 | Export-Csv .\p3.csv -NoTypeInformation
$p4 | Export-Csv .\p4.csv -NoTypeInformation
$p5 | Export-Csv .\p5.csv -NoTypeInformation
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing)

Import tif files as titles acting weird and wrong

Similar Messages

Maybe you are looking for