Import views from dumpfile

i have created a dumpfile with expdp from a schema that had tables, views and procedures. I want to restore only the schema's views , not the tables with impdp.- These are regular views, not materialzed views. What is the impdp syntax for importing views?
Thanks
Oracle 10G
Hp-ux 11.23

run your regular impdp command but add:
include=view
This will include only views.
Dean

Similar Messages

Import views from studio

Hi,
I have following problem with importing views during process deploy.
After importing project from studio to enterprise BPM I am obtaining message:
The import operation finished successfully.
Although the views were correctly imported, some of them could not be automatically associated with existing processes, roles, and variables in the directory. Click here to show/hide the error message detail
The following views are assigned to non-existent roles or roles that do not belong to any of the processes assigned to this view. MyView : [LisoRole]
Role LisoRole was created during import, and is usesd in process. Although I cannot see MyView in workspace. Do you have any clues?
Best regards,
Michal

I had the same problem when trying to publish the process to different OUs, I do not know if it is your case.
In my case I think it was a bug, the view was created in Enterprise but I had to go to the Workspace Administrator to configure it manually. But in my case was happening only when deploying the same process to different OUs. Is it your case?
HTH
Edited by: ruben.vidaurre on 12-nov-2009 3:08

Can I import and view from a camara

I was reading on the new that there are a few ways to import pictures from my Canon G5 camera. The two most common are the Belkin compact flash reader, or the apple iPod camera connector (I think it is called). the thing that plugs into the ipod and the camera plugs in through the USB plug. Is there anyway to import and view the pictures in the field from the Canon G5, or do I just import them as data and have to go through the computer later. This would be on a 5G iPod. Has anyone had success doing this in the field yet.

Am a new iPod owner myself, but as I understand it, you can view thumbnails or iPod screen size renderings of the photos loaded into the unit. Suspect the functionality will depend on why you need to look at them and the level of detail required for your field work.

IMPORT a VIEW from an export dump file

I'm trying to import a view from an export dump file. In using the Import Utility, do I use the TABLE parameter and give the View name ie: TABLES=view1
null

Only I want to do is import ONE view from an export dmp file that contains hundereds of table, many views and procedures. I do not want to reimport everything from the export file.

Can't import photos from finepix A345 to iPhoto or Finepix viewer mac ibook

I had previously imported photos from my fuji finepix A345 camera to iPhoto on my macBookPro 10.4.9. Now I am trying to import new images from the same camera and iPhoto displays a message "no photos to import". I have installed Finepix viewer but it also shows no images to import. I have tried creating a new library on a second non admin account and still iPhoto says "no images to import". I was able to successfully import the same images to my thinkpad T41.
Please help me find a way to import photos from finpix A345 to my mac ibook pro. Note there are no movies in the photos I am trying to import. Thanks.

Are you sure there are images on the card you're importing from? (asking that just in case you chose to 'delete after download' with another computer).
Also, have you perhaps formatted the camera drive/card via another computer instead of from the camera itself?
If your MBP can read the card so can your Macbook. You might want to open 'Image Capture', then go to Preferences and make sure you have an application selected to 'launch' when a camera is connected.

Unable to view Imported DC from NWDI in the webdynpro explorer view

Hello,
I am facing problem with NWDS version 2.0.22. we are upgradeing EP04 SPS 14 to sps 22. When I import a DC project from NWDI from inactive view of development configuration perspective I cannot see the created DC's in Webdynpro Explorer view of webdynpro perspective but it is showing in Navigator view.
Also when I create Webdynpro Project or Webdynpro DC locally I was able to see it in Webdynpro Explorer view.
Can any one please tell me why I was not able to view imported Webdynpro DC's that I create from Inactive view of Development Configurations perspective (selected DC in inactive view and right click and create project).
Also when I compared the Folder structure in the Navigator view of Webdynpro perspective.   I found below folders structure differences.
Imported DC from Inactive View of Development configurations
Folders:
cfg, def, gen, Model Folder (and sub-forders), src(and sub-forders), test.
Files:
.dcdef and .project
Locally created DC (which is visible in the Webdynpro Explorer view)
Folders:
bin, cfg, def, gen, gen_ddic(and sub-forders), gen_wdp(and sub-forders), lib, META-INF, Model Folder, src(and sub-forders), test.
Files:
.classpath
.dcdef
.project.
Thanks

Hi Experts,
I get below error when I create project.
com.sap.tc.devconf.SyncException: Failed to sync DC "xx.com/xxdcnamexx(xx.com_xx_1)" in configuration "xx_D". File "C:\Documents and Settings\Administrator\.dtc\0\DCs\xx.com\dcname\_comp\.dcdef" does not exist locally after sync but it exists on the server
     at com.sap.tc.devconf.impl.DCProxy.syncSources(DCProxy.java:916)
     at com.sap.tc.devconf.impl.DCProxy.syncAsSources(DCProxy.java:744)
     at com.sap.tc.devconf.impl.DevelopmentConfiguration.syncAsSources(DevelopmentConfiguration.java:4964)
     at com.sap.tc.devconf.impl.DevelopmentComponentNode.syncAsSources(DevelopmentComponentNode.java:955)
     at com.sap.ide.eclipse.component.provider.actions.dc.DcCreateProjectAction$1.syncSelectedDCs(DcCreateProjectAction.java:443)
     at com.sap.ide.eclipse.component.provider.actions.dc.DcCreateProjectAction$1.execute(DcCreateProjectAction.java:237)
     at org.eclipse.ui.actions.WorkspaceModifyOperation$1.run(WorkspaceModifyOperation.java:71)
     at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
     at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:85)
     at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)

Imported ical from outlook and the date across the top of the weekly view all show the date i imported..

imported ical from outlook and the date across the top of the weekly view all show the date i imported..

I'm confused, what does iCal have to do with this, it seems as though you went from Outlook to Entourage, is that correct?

Import Scenario from BPR - how to view the Version after import

On SOLAR01 when you import scenarios from the BPR, how can you view the version of the Products that were imported? Sometimes in the BPR there are several versions available to import for a particular product.
Once you have imported those business processes, how can you see the version that is tied to the one you imported?

Helmut,
If you don't have access to the server console, it might be possible to 'trick' tp into working from a workstation, but I wouldn't bet on it. You'd have to fake up a profile for it. I haven't tried this.
Peering into the contents of a delivered transport file would be something that your Basis team would typically do. My suggestion is to work with them, either to use tp command-line option from the server console, or if that's not reasonable, then yes, go ahead and add it to the import queue of one of your sandbox systems. You can always delete it from the queue again later. If you don't actually import it, it isn't going to hurt anything.
To do any of these options is going to require some level of filesystem access to your transport host, as you need to copy the two files that make up the transport there. You need to put the 'K' file into \usr\sap\trans\cofiles and the 'R' file into \usr\sap\trans\data. Then, you can either use the tp command-line tool, or you can go into STMS, go into the import queue of any system in the transport domain (so a sandbox is fine), and use Extras... Other Requests... Add and type in the transport request ID. Yes, this adds some entries about the transport into a few tables, but it doesn't actually import the transport, and it doesn't change anything about your system. It just allows the transport to show up as importable in the queue, and that will make it so that you can read the object list of the transport. Then, if you decide not to import it, you can delete it from the queue, and your system is back to the way it was before. Also, doing this will not put the transport into any other system's queue. Even if you import the transport (into a sandbox system), it won't show up in any other system's queue until you forward it.
Regards,
Matt

Import a single view from a full export

Good Morning
How can I extract a single view from a export file?
I can restore a single table no problem
or the whole export file, but i just need one
view out of it
Thanks
David

Hi David & Reza,
There is a way where you can extract a single view from the export file.
01. Do the import process with show=y, that will show all the DDL syntaxes including views.
02 Spool or redirect the output to a file.
03.Get the view syntax and recreate it.
Cheers,
Kamalesh JK

HT201317 can i still import/view the photos from my iphone in my windows xp system pc?

can i still import/view the photos from my iphone in my windows xp system pc?

That's a question you'll need to ask Apple:
iPhoto Menu -> Provide iPhoto Feedback

Viewing and Importing photos from iPhone to iPhoto'09

Since updating to IOS 5.1, I am unable to view or import photos from my iPhone 4 in iPhoto'09 on my iMac running OS X, v 10.6.8. Can anyone help?

Your question is probably better suited for the iPhoto forum for iLife applications. This forum is for the iPhoto application for iOS (iPhoto on your iPhone or iPad).
https://discussions.apple.com/community/ilife/iphoto
If you repost your question there, it might be helpful to let everyone know exactly what has gone wrong. Does your iPhone not appear in the list of Devices? Does it appear but no pictures are available? It seems it used to work before you updated your iPhone to iOS 5.1... Have you run the Software Update on your Mac to make sure your copy of iPhoto is up-to-date? I have iPhoto '09 8.1.2. and I can import pictures I've taken with my iPhone 4 (iOS 5.1) into iPhoto but I'm running Mac OS X 10.7.3 (Lion).
-Doug

Cam I import/view additional shooting data from camera?

Is it possible to import/view shooting data beyond the exif data shown in metadata panel in Library module, for example flash type, sync, exposure and flash compensation and other data that is viewable on camera in playback mode?

You'll need a plugin for that, e.g. ExifMeta.

Importing footage from sony HDR-SR12 to External for later use in imovie?

Hi all, I have a question, I would like to save my movie footage which is on my sony HDR-SR12 to a external drive(G Raid1TB) so I can view and also import clips to imovie for making movie's later. I have partitioned the Ext HD 150gb for photos and 781gb for movie footage. Just out of curiosity I mounted my camera and pressed get info and the format on the sony camera is MS-Dos(fat32) does this matter at all? Also which is the best way or how do I import the footage from sony hdr-sr12 to the external Hd. I have never done this before so your help would be greatly appreciated, I don't want to mess up.
Thank You
Jess

I should have mentioned, it is a good idea to make an archive copy of your AVCHD footage before importing. You should be able to do this from the FILE menu in iMovie. This will preserve the AVCHD files exactly as they were on the camera.
When you import, you convert the AVCHD files (which are highly compressed) into Apple Intermediate Codec, which is suitable for editing.
If you want to make sure that your archive copy is working properly, you can import from your archive copy, rather than importing directly from the camera. This is a good way to make sure you have a good archive copy before erasing the video on the camera.

Design view and browser view in DW are different than when I view from local folder

I'm brand new to Dreamweaver CS5.5 and here is my problem:
I've made an html page in dreamweaver with a banner, with an additional graphic and some text on top of the banner. It displays just fine in every browser when I view from the local folder, but when I open DW and view, it displays incorrectly in all three design, live and browser views within DW. If I make changes to the css file until it views correctly in design view, it no longer displays correctly from the local folder and it still doesn't view correctly in live or browser view within DW. If what I'm doing isnt going to display accurately in any of the views provided by Dreamweaver as compared to the live server, whats the point in having this software? I could just keep building webpages in notepad and uploading with CoreFTP.
Any suggestions? Is it some setting that I dont know about that I need to change within DW? Please help.

align="center" is deprecated (obsolete) code in XHTML & HTML5 doc types. Instead of styling markup with HTML, you should be using CSS.
CSS
.center {text-align:center}
HTML
<p class="center">some centered text here</p>
With respect to break tags, in XHTML doc types the correct syntax is <br /> not <br>. However your usage of line breaks is inconsistent with good symantic markup. Use headings <h1> <h2> <h3> <h4> for important keywords. Use <p> for descriptive paragraphs. Use <ul> <li> or <ol> <li> for lists. Line breaks should be used minimally if ever.
XHTML doc types require all tags to be lowercase. Uppercase tags will throw errors.
Your design is too rigid. When text size is increased in browsers, your content is unreadable. See screenshot.
SOLUTIONS:
1) DO NOT USE POSITION ABSOLUTE. You don't need it. Absolute positioning removes content from the normal document flow resulting in a jumbled mess. Use default CSS positioning (none) with margins, padding & floats to align elements.
2) Remove HEIGHT values from all CSS containers. Height limits a container's capacity to hold more content when needed. Container height should always be determined by the amount of content it holds; not explicit values. If required to reveal a background image, for example, use CSS min-height instead of height.
CSS Box Model
http://www.w3schools.com/css/css_boxmodel.asp
CSS Floats
http://www.w3schools.com/cssref/pr_class_float.asp
CSS min-height
http://www.w3schools.com/cssref/pr_dim_min-height.asp
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/

How can you import pictures from the iphoto app to your mac book pro into iphoto on a mac book pro using mavericks?

I've tried to look this up on the app, and it tells me to use the iTunes file sharing and I can see anything with this trying to use both. I'm trying to keep my pictures in chronological order. Does in know how I can use this? Any help I would greatly appreciate. Thank you!

OK. This is two separate issues. To import pictures on your iPhone into your MBP, you can use iPhoto or the Image Capture app (in the Applications folder).
To use iPhoto, connect your iPhone to your Mac with its USB cable & launch iPhoto. Your iPhone will be listed it in the "Devices" panel on the left. Choose it & you will get a window where you can import all or selected photos as either "split events" or as a single event. If you need help with this, try opening iPhoto's built-in help & selecting the "Import Photos" item. That will open the Import photos from iPhone or other mobile phone help topic. Expand the Import photos from iPhone section & study it. It should answer all your questions about this better than I can!
To use the Image Capture app, you connect the iPhone & select it just like above. The app has several options for importing images, but what you may find useful if you do not want to import directly into iPhoto is that you can just drag any of the iPhone's displayed items onto the desktop or into a folder like you would any other file & they will be copied to that location.
As for organization of items in iPhoto, there are four ways they can be grouped for display (by event, by photo, by face, & by place). All except by faces offers a "By date" sort choice in the iPhoto View > Sort Photos menu item.

Import views from dumpfile

Similar Messages

Maybe you are looking for