Important Configuration/Log Files for Storage Tek

Hi,
I have 6140 Storage Arrays, in the same ref. I would like to know more about command line details.
1. Important Configuration files
2. Important Log Files
3. Event Messages file
4. Important utilities like sscs, service, suppport and their default path.
5. Solaris FC constroller configuration files.
Please suggest in case I can get this details from any doc, as I already referred Sun Storage Tek 6140 Getting Started Guide for the same but not found much details.
Thanks
Rajan

I figured out what my problem was here. The Windows user that the portal processes run as is the user who writes the log files. In this case, this user is a local user to the portal server and not a Windows domain user. This means that the user does not have access to write to the shared drive.
We had two options as to what we could do here. The first would be to change the user that's running the portal to a user that could write to that shared drive. The second option would be to have the portal write the log files locally on the portal server and then have a script run as a domain user on that server sometime in the day and copy the files to the shared drive. We are going with the second option.

Similar Messages

Managing and configuring log files for Oracle 9ias

Hi all,
I'm wondering where I can find documentation on managing and configuring log files like:
ORACLE_HOME/admin/ sid/*dump/* ORACLE_HOME/assistants/opca/install.log ORACLE_HOME/webcache/logs/*
ORACLE_HOME/dcm/logs/*
ORACLE_HOME/ldap/log/*
ORACLE_HOME/opmn/logs/*
ORACLE_HOME/sysman/log/*
ORACLE_HOME/j2ee/ OC4J_instance/log/*/* ORACLE_HOME/config/schemaload.log ORACLE_HOME/config/useinfratool.log
because I didn't find anything in document like:
Oracle9 i Application Server
Administrator�s Guide
Release 2 (9.0.2)
May 2002
Part No. A92171-02
So, if anyone has any idea...
Thanks in advance

Does anyone know how or if it is possible to send the stdout and/or stderr to the log4j type of logging? I already capture the stdout and stderr to the flat file. But I would like to timestamp every line to compare and diagnose problems with each application that encounters problems. Each web app is using log4j to their own application log4j log file. When they encounter errors or resource draining problems, I would like to see the container logs and see what was occuring inside the container at around that same time.
Any ideas?

Configure Log File for each web application deployed in weblogic server usi

Hi All,
How do I configure Log4J to log separately for each web application? i.e. Assuming, I have a web application "AWeb" and a web application "BWeb". I need a log file to be created for AWeb Separately and BWeb Separately. i.e. All the log information for "AWeb" web application will be stored in AWeb.log and all the "BWeb" web application will be stored in BWeb.log
Do you have any sample code and configuration details for the above-mentioned requirement?
Thanks in Advance,
C R Baradwaj

You do not need to do anything strange, just use log4j the usual way with the exception that you do not need to init log4j (this is not necesary when using a log4j.xml.)
A minimal sample of a log4j.xml is
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
<log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/">
<appender name="ConsoleAppender" class="org.apache.log4j.ConsoleAppender">
<layout class="org.apache.log4j.SimpleLayout"/>
</appender>
<root>
<priority value ="debug" />
<appender-ref ref="ConsoleAppender"/>
</root>
</log4j:configuration>
You just have to be sure that you have different log4j.xml in your classpath for different web applications.
Regards,
LG

Java.util.logging - different log files for different loggers

I'm having trouble configuring Java logging to use different log files for different loggers.
In log4j, I would do this by configuring multiple loggers each with a different appender. But how can I do this with Java (java.util.logging) logging?
This is the basic idea of what I'd like to do:
com.mycompany.app1.level = FINEST
com.mycompany.app1.<log file> = logfile1.log
com.mycompany.app2.level = ALL
com.mycompany.app2.<log file> = logfile2.log
Any suggestions?

This kind of thing?
import java.io.IOException;
import java.util.logging.FileHandler;
import java.util.logging.Level;
import java.util.logging.Logger;
import java.util.logging.SimpleFormatter;
public class LogTest {
    private Logger app1;
    private Logger app2;
    public LogTest() {
        // setup loggers
        try {
            // first logger
            app1 = Logger.getLogger("com.mycompany.app1");
            FileHandler filehandler = new FileHandler( "logfile1.log" );
            filehandler.setFormatter(new SimpleFormatter());
            app1.addHandler(filehandler);
            // second logger
            app2 = Logger.getLogger("com.mycompany.app2");
            filehandler = new FileHandler( "logfile2.log" );
            filehandler.setFormatter(new SimpleFormatter());
            app2.addHandler(filehandler);
        } catch(IOException ioex) {
            ioex.printStackTrace();
    private void logStuff() {
        app1.log(Level.SEVERE, "a message for log 1");
        app2.log(Level.SEVERE, "a message for log 2");
        app2.log(Level.WARNING, "another message for log 2");
     * @param args
    public static void main(String[] args) {
        new LogTest().logStuff();
}

(Cisco Historical Reporting / HRC ) All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054

Hi All,
I am getting an error message "All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054" when trying to log into HRC (This user has the reporting capabilities) . I checked the log files this is what i found out
The log file stated that there were ongoing connections of HRC with the CCX (I am sure there isn't any active login to HRC)
|| When you tried to login the following error was being displayed because the maximum number of connections were reached for the server . We can see that a total number of 5 connections have been configured . ||
1: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Current number of connections (5) from historical Clients/Scheduler to 'CRA_DATABASE' database exceeded the maximum number of possible connections (5).Check with your administrator about changing this limit on server (wfengine.properties), however this might impact server performance.
|| Below we can see all 5 connections being used up . ||
2: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:[DB Connections From Clients (count=5)]|[(#1) 'username'='uccxhrc','hostname'='3SK5FS1.ucsfmedicalcenter.org']|[(#2) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#3) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#4) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#5) 'username'='uccxhrc','hostname'='47BMMM1.ucsfmedicalcenter.org']
|| Once the maximum number of connection was reached it threw an error . ||
3: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Number of max connection to 'CRA_DATABASE' database was reached! Connection could not be established.
4: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Database connection to 'CRA_DATABASE' failed due to (All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.)
Current exact UCCX Version 9.0.2.11001-24
Current CUCM Version 8.6.2.23900-10
Business impact Not Critical
Exact error message All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054
What is the OS version of the PC you are running and is it physical machine or virtual machine that is running the HRC client ..
OS Version Windows 7 Home Premium 64 bit and it’s a physical machine.
. The Max DB Connections for Report Client Sessions is set to 5 for each servers (There are two servers). The no of HR Sessions is set to 10.
I wanted to know if there is a way to find the HRC sessions active now and terminate the one or more or all of that sessions from the server end ?

We have had this "PRX5" problem with Exchange 2013 since the RTM version. We recently applied CU3, and it did not correct the problem. We have seen this problem on every Exchange 2013 we manage. They are all installations where all roles
are installed on the same Windows server, and in our case, they are all Windows virtual machines using Windows 2012 Hyper-V.
We have tried all the "this fixed it for me" solutions regarding DNS, network cards, host file entries and so forth. None of those "solutions" made any difference whatsoever. The occurrence of the temporary error PRX5 seems totally random.
About 2 out of 20 incoming mail test by Microsoft Connectivity Analyzer fail with this PRX5 error.
Most people don't ever notice the issue because remote mail servers retry the connection later. However, telephone voice mail systems that forward voice message files to email, or other such applications such as your scanner, often don't retry and
simply fail. Our phone system actually disables all further attempts to send voice mail to a particular user if the PRX5 error is returned when the email is sent by the phone system.
Is Microsoft totally oblivious to this problem?
PRX5 is a serious issue that needs an Exchange team resolution, or at least an acknowledgement that the problem actually does exist and has negative consequences for proper mail flow.
JSB

How to create different log files for each of web applications deployed in OC4J

Hi All,
I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
1. how to create different log files for each of my deployed web applications ?
2. what are the advantages in running multiple instances of oc4j and in what case we should run
multiple instances of OC4J ?
3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
Thanks and Regards,
Kumar.

Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi.

How to create different log files for different levels

Hi,
Can some one please help me with my problem I have here?
I want to send log data to two diffrent files depending on the logging level such as DEBUG and WARN using the same logger instance.
How can you configure this in log4j.properties.
Please post sample code for log4j.properties to achieve this.
Thanks in advance.
Anurag SIngh

Hi,
I have tried your code. the issue is other log file for error is blank. its not writting log to that file.
following is the code of my log4j.properties
Please read the code first
# Set root logger level to DEBUG and its only appender to A1.
log4j.rootCategory=DEBUG,A1
#Appender and its layout for A1
log4j.appender.A1=org.apache.log4j.FileAppender
log4j.appender.A1.layout=org.apache.log4j.PatternLayout
log4j.appender.A1.layout.ConversionPattern=%-4r [%t] %-5p %c %x - %log4j.appender.A1.Threshold=DEBUG
log4j.appender.A1.File=./LogonApplication_Debug.log
log4j.appender.A1.Append=true
#Appender and its layout for A2
log4j.appender.A2=org.apache.log4j.FileAppender
log4j.appender.A2.layout=org.apache.log4j.PatternLayout
log4j.appender.A2.layout.ConversionPattern=%-4r [%t] %-5p %c %x - %
log4j.appender.A2.Threshold=ERROR
log4j.appender.A2.File=./LogonApplication_Error.log
log4j.appender.A2.Append=true
In my logger class i have written something like this:
public static Logger myLogger = Logger.getLogger (LoggerTest.class.getName());
     public static void main(String args[]){
          myLogger.debug("I have logged a debug message");
          myLogger.error("I have logged an error message");
Issue:
Now the problem is that it is creating two files specified in the configuration but it is logging messages both the messages debug and error in only ./LogonApplication_Debug.log file.
Though it is creating the ./LogonApplication_Error.log file, but it is only blank.
Can you please trace whats missing/wrong.
Thanks a lot.
Shanu

How to create different log files for different users in log4j

I want to create different logs for different users, using different appenders for each user so that logs are created in his file only.
Confusion:How to direct them to different files in my logger class

Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi.

Internal error has occurred. Check log files for details.

While configuring software library on OEM 11g grid control, i get the error as Internal error has occurred. Check log files for details.
On checking emoms.trc i see the following error
2011-08-08 22:15:13,298 [EMUI_22_15_13_/console/provision/admin/admin] ERROR em.provis
ion checkAllSoftwareLibLocs.216 - AdminUtil:checkAllSoftwareLibLocs: No software libra
ry locations configured.
2011-08-08 22:15:13,320 [EMUI_22_15_13_/console/provision/admin/admin] ERROR em.provis
ion handleValidateLocsSoftwareLib.1754 - AdminController:handleValidateLocsSoftwareLib
: ComponentException while fetching all software library locations from repostiory.
oracle.sysman.emgc.provision.component.ComponentException: Software Library location i
s not configured.
at oracle.sysman.emgc.provision.ui.model.admin.AdminUtil.checkAllSoftwareLibLo
cs(AdminUtil.java:218)
at oracle.sysman.emgc.provision.ui.model.admin.AdminUtil.checkAllSoftwareLibLo
cs(AdminUtil.java:146)
at oracle.sysman.emgc.provision.ui.controller.admin.AdminController.handleVali
dateLocsSoftwareLib(AdminController.java:1746)
at oracle.sysman.emgc.provision.ui.controller.admin.AdminController.handleEven
t(AdminController.java:397)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:578)
at oracle.sysman.emgc.provision.ui.controller.AbstractProvisioningPageHandler.
handleRequest(AbstractProvisioningPageHandler.java:235)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:738)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:329)
at oracle.sysman.eml.app.Console.doGet(Console.java:352)
at oracle.cabo.servlet.UIXServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubS
ecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelp
er.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:311)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.app.exception.EMRuntimeExceptionFilter.doFilter(EMRuntim
eExceptionFilter.java:58)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.jav
a:41)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.ja
va:122)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:10
2)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:502
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.
java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(
WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubje
ct.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServlet
Context.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext
.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:14
32)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
2011-08-08 22:24:58,397 [EMUI_22_24_58_/console/provision/admin/edit_sw_lib_dir_config
uration] ERROR svlt.PageHandler handleRequest.640 - java.lang.NoClassDefFoundError: Co
uld not initialize class oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps
java.lang.NoClassDefFoundError: Could not initialize class oracle.sysman.oii.oiip.osd.
unix.OiipuUnixOps
at oracle.sysman.oii.oiip.oiipg.OiipgFileSystem.getVolumeName(OiipgFileSystem.
java:615)
at oracle.sysman.eml.swlib.bitstore.FileBitStore.getFreeSpaceInKB(FileBitStore
.java:1044)
at oracle.sysman.eml.swlib.LibraryServiceImpl.getFreeSpaceInKB(LibraryServiceI
mpl.java:1572)
at oracle.sysman.emgc.provision.impl.component.SoftwareLibraryImpl.getFreeSpac
eInKB(SoftwareLibraryImpl.java:2582)
at oracle.sysman.emgc.provision.impl.component.ComponentManagerImpl.getFreeSpa
ceInKB(ComponentManagerImpl.java:664)
at oracle.sysman.emgc.provision.ui.model.admin.SoftwareLibContext$OkButton.han
dleClickEvent(SoftwareLibContext.java:860)
at oracle.sysman.emgc.provision.ui.controller.AbstractProvisioningPageHandler.
handleEvent(AbstractProvisioningPageHandler.java:427)
at oracle.sysman.emgc.provision.ui.controller.admin.SoftwareLibController.hand
leEvent(SoftwareLibController.java:53)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:578)
at oracle.sysman.emgc.provision.ui.controller.AbstractProvisioningPageHandler.
handleRequest(AbstractProvisioningPageHandler.java:235)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:738)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:329)
at oracle.sysman.eml.app.Console.doGet(Console.java:352)
at oracle.cabo.servlet.UIXServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubS
ecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelp
er.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:311)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.app.exception.EMRuntimeExceptionFilter.doFilter(EMRuntim
eExceptionFilter.java:58)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.jav
a:41)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.ja
va:122)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:10
2)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:502
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.
java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(
WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubje
ct.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServlet
Context.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext
.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:14
32)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Hi, I followed all the steps correctly and also the owner of the directory is correct.
But i have not installed the patches which is listed at the bottom of the link page.
I had done this on RHEl and i had no problem but now i am getting problem on solaris.

Internal Error has occurred. Check the log file for details.

Hello Experts,
After installing Oracle 11g R2 in Windows XP (32-bit), I get the following error message when logging into https://localhost:1158/em - "Internal Error has occurred. Check the log file for details." I have extracted the following files onto one directory and used it for installation: win32_11gR2_database_1of2.zip, win32_11gR2_database_2of2.zip, p10098816_112020_WINNT_1of6, p10098816_112020_WINNT_2of6, p10404530_112030_WINNT_1of6, p10404530_112030_WINNT_2of6. I get no errors during the install. I selected "Create and configure a database". I selected "Desktop Class". I took the default locations (in step 5). Can someone please assist me?
Thank you.

internal error occur with some java exception?. some tabs are accessed like administration and when you click on performance than you are get logout??
this is the problem which you are facing??>

History report error: | An Exceptional Error occurred. Application exiting. Check the log file for error 5022

Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.

wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account.

Error while importing a text file for a list of values

Hi Experts,
While importing a text file for a list of values in designer, I am getting error message as below:
"Invalid setting in Excel key of the Engines section of the Windows Registry. (3433)".
I am using BO XI R3. Universe Designer version : 12.1.0.882
Any suggestion ?
Regards

plzzzzzzzzzzzzzzzzz.............sme1 help me out

LOG FILE for batch scripting in MAXL

Hello,
I just wanted to know how to create a LOG FILE for batch scripting.
essmsh E:\Batch\Apps\TOG_DET\Scripts\unload_App.msh
copy e:\batch\apps\tog_det\loadfile\gldetail.otl e:\hyperion\analyticservices\app\tog_det\gldetail /Y
essmsh E:\Batch\Apps\TOG_DET\Scripts\Build_Hier_Data.msh
REM
ECHO OFF
ECHO Loading GL actuals into WFS \ Combined......
E:\HYPERION\common\Perl\5.8.3\bin\MSWin32-x86-multi-thread\PERL.EXE E:\Batch\Apps\WFS.COMBINED\AMLOAD\WFSUATAMLOAD.PLX
E:\HYPERION\common\Perl\5.8.3\bin\MSWin32-x86-multi-thread\PERL.EXE E:\Batch\Apps\WFS.COMBINED\AMLOAD\WFSUATAMLOAD.PLX
Drop object d:\NDM\Data\StampFiles\STAMPLOADBKUP.csv of type outline force;
Alter object d:\NDM\Data\StampFiles\STAMPLOAD_cwoo.csv of type outline rename to d:\NDM\Data\StampFiles\STAMPLOADBKUP.CSV;
SET LogFile=E:\Batch\Apps\TOG_DET\Logs.log
This file does not generate log file can any help me what might be the problem? Even though some of the steps above are not correct it should generate me log file atleast. I need syntax or whatever it is to generate Log file.
Regards
Soma

I wanted to have a logfile of the following batch script regardless of whether the script is running or not.
essmsh E:\Batch\Apps\TOG_DET\Scripts\unload_App.msh
copy e:\batch\apps\tog_det\loadfile\gldetail.otl e:\hyperion\analyticservices\app\tog_det\gldetail /Y
essmsh E:\Batch\Apps\TOG_DET\Scripts\Build_Hier_Data.msh
REM
ECHO OFF
ECHO Loading GL actuals into WFS \ Combined......
E:\HYPERION\common\Perl\5.8.3\bin\MSWin32-x86-multi-thread\PERL.EXE E:\Batch\Apps\WFS.COMBINED\AMLOAD\WFSUATAMLOAD.PLX
Drop object d:\NDM\Data\StampFiles\STAMPLOADBKUP.csv of type outline force;
Alter object d:\NDM\Data\StampFiles\STAMPLOAD_cwoo.csv of type outline rename to d:\NDM\Data\StampFiles\STAMPLOADBKUP.CSV;
What I really want is I need a log file of the above batch script, how the above scripts are running. I do not care whether they are giving me positive results but I need to know what is happening in logfile. HOw will the log file be generated.
Regards
SOma

How To Generate Debug Log Files for ebs jsp?

hi How To Generate Debug Log Files for ebs r12 jsp?
and where i get the log .please help me thanks!

Please check following MOS Document
Oracle Application Server Diagnostic Tools and Log Files in Applications Release 12 (Doc ID 454178.1)

Is it possible to create materialized view log file for force refresh

Is it possible to create materialized view log file for force refresh with join condition.
Say for example:
CREATE MATERIALIZED VIEW VU1
REFRESH FORCE
ON DEMAND
AS
SELECT e.employee_id, d.department_id from emp e and departments d
where e.department_id = d.department_id;
how can we create log file using 2 tables?
Also am copying M.View result to new table. Is it possible to have the same values into the new table once the m.view get refreshed?

You cannot create a record as a materialized view within the Application Designer.
But there is workaround.
Create the record as a table within the Application Designer. Don't build it.
Inside your database, create the materialized with same name and columns as the record created previously.
After that, you'll be able to work on that record as for all other within the Peoplesoft tools.
But keep in mind do never build that object, that'll drop your materialized view and create a table instead.
Same problem exists for partitioned tables, for function based-indexes and some other objects database vendor dependant. Same workaround is used.
Nicolas.

Important Configuration/Log Files for Storage Tek

Similar Messages

Maybe you are looking for