Imported Archive. Help required

Hi All,
I want to develop java program on my local system.I do not have NWDS , Eclipse etc.
I want to use below classes. From where I can download them:
import com.sap.aii.mapping.api.AbstractTrace;
import com.sap.aii.mappingtool.tf3.rt.Container;
import com.sap.aii.mappingtool.tf3.rt.GlobalContainer;
Regards

Hi Rick,
If you are having the access to your XI server then you can download those jars. Other wise you can download from the service market place.
aii_map_api.jar
com.sap.aii.mappingtool.tf3.rt.Container
In your XI server go to Drive:\usr\sap\<SID>\DVEBMGS00\j2ee\cluster\server0\apps\sap.com\com.sap.xi.services and get the aii_mt_rt.jar and use it.
Go to service marketplace and d/load SAPXITOOL Patch of any version (better 13 open it with winzip u'll find IntegrationServices.sda open this with winzip and get the aii_mt_rt.jar and use it.
Regards
Goli Sridhar

Similar Messages

Business Partner Data Archiving - Help Required

Hi,
Am New to Data Archiving and need help to Archive Business Partner in CRM. I tried to Archive some BP's but it was not archiving. Kindly throw some light on it.
Problem we face are:
1) When we try to write a Business Partner to an Archive File the Job Log Shows finished but no files are created in the System.
2) When we try to delete the BP from Data Base it doesn't show the Archived BP's that could be deleted (I guess this is because there are no archived file).
Archive Object Used is CA_BUPA. We have created a Variant and set the Time as Immediate and Spool to LOCL.
Kindly let us know if there is any step we are missing here and if we are on the wrong track.
All answers are appreciated.
Thanks,
Prashanth
Message was edited by:
        Prashanth KR

Hi,
To archive a BP following steps are to be followed.
A. Mark the BP to be archived in transaction BP >status tab
B. Run dacheck
FYI : Steps on how to perform dacheck :
1. In transaction DACONTROL change the following parameter to the
values : for CA_BUPA .
No. calls/packages   1
Number of Objects   50
Package SizeRFC     20
Number of Days       1 (if you use mobile client it should be more)
2.If a business partner should be archived directly after the
archiving note was set, this can be done by reseting the check
   date with report CRM_BUPA_ARCHIVING_FLAGS.
   here only check (set) the options :
   - Archiving Flag
   - Reset Check Date
Reset all options should be unchecked.
3. go to dacheck and run the process
4. This will change the status of the BPs to 'Archivable'
   *Only those bp's which are not involved in any business transactions,
    install base, Product Partner Range (PPR) will be set to archivable
The BP's with status 'Archivable' will be used by the archiving
     run.
Kindly refer note 646425 before goint to step C ***
C.Then run transaction CRM_BUPA_ARC.
- Make sure that the "selection program" in transaction "DACONTROL"
   is maintained as " CRM_BUPA_DA_SELECTIONS"
Also create a variant, which can done by excecuting
CRM_BUPA_DA_SELECTION and enter the variants name for the field
Variant. This variant is the buisness partner range.
- Also please check note 554460.
Regards, Gerhard

PM Order Archiving - Help Required!

Hi All,
I am trying to archive PM Orders and I find myself in a situation where irrespective of the Order Type or Planning Plant Condition that I give the archive pre-processing spool gives absolutely no Log Summary.
There are no records which are marked with deletion flag and indicator. I am unable to archive write them as well.
I have configured Residence Times R1 and R2 both as 0.
Any help/suggestion will be greatly appreciated.
Looking forward for some solutions,
Regards,
Janani

Hi venkat,
Are the orders TECO and the DLFL (Deletion Flag) set on the orders themselves?
there r many dependencies you should think of when trying to archive the orders -
you should archive many other objects like _ Material documents, Purchase orders, notification etc'
you should try to archive one order which has all the functionality used in your implementation like external service , service entries, time and material consumed upon it. then teco it, settle it and flag for deletion, when you run the archiving program it will give you all the dependent documents to be archived , then try archiving them in the order they were created.
You have marked a PM order for deletion.( change in status DLFL). You must now set a deletion indicator. The residence time 1 is the time between setting the deletionflag and deletion indicator. Residence time 2 is the time between setting the deletion indicator and deletion from the database. In the spool of the archiveing run you must be able te see why the order can`t be archived.
Also take a look at note 0313760 - Order archiving ,confusing parameters
Reward with points if it is helpful
Regards
Alfred

XSLT mapping Help Required.

XSLT mapping Help Required.
Hi Experts,
I am New to XSLT Mapping. I am practising the below Example:
InputXML File:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
XSL StyleSheet File:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/Gen"
Xmlns:ns1=”http://XYZ.com/Test”>
<xsl:template match="/">
<ns1:MT_XSLT_Target>
<Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
<Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
</Name>
<Street> <xsl:value-of select="concat(concat(ns0:Mt_XSLT_Source/Person/Address/Houseno,' '),
ns0:Mt_XSLT_Source/Person/Address/Street)"/> </Street>
<City> <xsl:value-of select="ns0:Mt_XSLT_Source/Person/Address/City"/> </City>
</ns1:MT_XSLT_Target>
</xsl:template>
</xsl:stylesheet>
The Desired Output shuold be:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_XSLT_Target xmlns:ns1="http://XYZ.com/Test">
<Title>Male</Title>
<Name>Anshul Chowdhary</Name>
<Street>83/b 2nd Main</Street>
<City>Mysore</City>
</ns1:MT_XSLT_Target>
I have refered the xsl in xml and i am getting the below Oupt in a Single line like this:
Anshul Chowdhary Male 2nd Main 83/b Mysore
I am Unable to display in Target XML Fomrat as shown above. Please check and do the needful.
Regards,
GIRIDHAR

Hi,
I have used below for testing.
Input xml:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
xsl code:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/gen"
 xmlns:ns1="http://XYZ.com/Test">
 <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
 <xsl:template match="/">
 <ns1:MT_XSLT_Target>
 <Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
 <Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
 </Name>
 <Street> <xsl:value-of select="concat(concat(/ns0:MT_XSLT_Source/Person/Address/Houseno,' '),
 /ns0:MT_XSLT_Source/Person/Address/Street)"/> </Street>
 <City> <xsl:value-of select="/ns0:MT_XSLT_Source/Person/Address/City"/> </City>
 </ns1:MT_XSLT_Target>
 </xsl:template>
</xsl:stylesheet>
For testing in PI ,change the extension from .txt to .xsl and zip it and upload into PI as an imported archive .
Regards
Venkat

What is main diff b/w imported Archives and External Defination in IR

What is main diff b/w imported Archives and External Defination in IR

Hi Vijay,
ED-standard schema for describing the message structure.If you have the structure provided to you from some external application you can use it in PI directly without recreating in PI.you can import following formats which are used to describe message schema
WSDL (Web Service Description Language),
XSD (XML Schema Definition Language),
DTDs (Document Type Definitions)
Imported Archives: its used basically for java and xslt mapping where you create the required mapping externally using some tools
(java-eclipse/NWDS .XSLT-stylus studio).You can also implement XSLT and Java mappingsf and save them as archives in the Integration Repository.
read More details here
[ED|http://help.sap.com/saphelp_nwesrce/helpdata/en/26/9e97b0f525d743882936c2d6f375c7/content.htm]
[Imported Archives|http://help.sap.com/saphelp_nw04/helpdata/en/4c/b2ad3de2d76b3be10000000a114084/content.htm]
Regards,
Srinivas

Issue in .class file in imported archive ESR - after upload using eclipse

Dear Friends,
My requirement here is too change existing java mapping. Here I am exporting zip file from imported archive and after making changes in eclipse upload the .JAR file again. Here .class file is not opening after upload in Imported Archive.
Error is
Setup I am having on my system.
-> JDK version on my system JDK 1.6_34
-> JRE on my system – JRE 6
-> Using eclipse SDK 4.2.2
SAP PI servers settings.
I searched online blogs but no help. Can anybody guide me what wrong am I doing here?
Thanks.
Sumeet.

Thanks for reply..Hareesh.
-> In Eclipse only 1 warning is coming and no error. I guess Eclipse automatically compile .class file. Is there any way in eclipse to see if compilation is done properly?
-> I imported few external JAR files and already few JAR files are there in Eclipse(JRE1.6), as shown in fig below. Which JAR file is being user? How can I make sure?
-> When using Run as option I am not getting any option. Is it normal or did I have to activate some option?
Please give your views on this.
Thanks.
Sumeet.

How to upload into import archive

How to import the XSL mapping and JCO LOOK UPS int to import archive archive
should i import java file or class file in look ups part , what abt the XSLT mappimg part, then i want to test the mapping part will you please tell me how to copy the already existing interface so that i can test the mapping part without distrubing it
thanking you
sridhar

Hi,
To test the XSLT Mapping:
-Zip the .xslt file and import the zip into Improted Archive
-Then create the new Interface Mapping or you can copy old Interface Mapping by right clicking on the Interface Mapping where you required to use XSLT mapping
btw, if you are using xslt or java mapping, you need to just use this in the Interface Mapping.
-In interface mapping, you can see the drop down list to select type of mapping and proceed further. It will direct you .
Hope this helps,
Rgds,
Moorthy

Accessing a file in Imported Archive from Adapter module

Hi,
I am designing a module for File/FTP and Mail adapters. Is it possible to retrieve data from a CSV or TXT file uploaded in the Imported Archive from the Java code in the module? If this is possible, do I use the same approach as accessing the CSV data from the mapping using a UDF? If this is not possible, can you suggest other ways were I can access a CSV or TXT configuration file from an adapter module?
I would like to avoid using Module key, Parameter name and Parameter value as I would like to make the adapter module generic and the data I will be reading might be too much to be specified in this location. However, I would use the Module key, Parameter name and Parameter value to specify the CSV or TXT filename which the adapter module will be using.
Thanks in advance for any help that you can provide.
Regards,
Elbert

Imported archives are part of mapping flow and adapter modules are more part of routing. Therefore I don't think imported archive could be made accessible anywhere outside mapping.
but my CSV or TXT file would be updated regularly by the developer.
So were you planning to import this file again and again under imported archive? This doesn't seems to be a good solution when you think about changin Design part in Production environment. It would be better to give access to certain folder to developer to put the file there and access it using some code. You may refer this
/people/sundararamaprasad.subbaraman/blog/2005/12/09/making-csv-file-lookup-possible-in-sap-xi
Regards,
Prateek

Imported archives

How to import externally defined mapping programs in to Imported archieves? could anybody help me....
Thanks in advance,
Manoj

Hi Manoj,
            XI supports 4 types of mappings
                        1. Message mapping
                        2. XSLT MApping
                        3. JAVA Mapping
                        4. ABAP Mapping.
                 If you go with message mapping or ABAP mapping no need to use imported archive. If you want to implement XSLT or JAVA mapping then only you need to import those programmes into imported archives. when import the external programms(XSLT or JAVA) to the Imported archives then should keep those file as a ZIP. The ZIP files only can import to the Imported Archives.
Thanks,
Satish

Help required from JDeveloper Development Team.

HI there,
I Download the JDeveloper 10.1.2 (1811) from OTN, But the downloaded archive file is unable to open. I did the download once again but I am facing same problem. I want to JDeveloper 10.1.2 for the installation of BI Beans 10.1.2.
Help required from JDeveloper Development Team
Thanks For Your Time,
Regards,
ViSHAL.

Please use an informative Subject line, there is more chance that people will read the post.
All we can suggest is that you try the download again.

Help required integration opensso with OAM

Help required integration openssowith OAM
Edited by: user13111258 on Mar 24, 2011 5:58 AM

You will need quite a lot of help so you might consider hiring someone who knows both OpenSSO and OAM. Anyway, which version of OAM are we talking about here as this is very important to know, as well as what types of agents that are involved and whether this is a single domain or cross domain solution.

What is the Use of Imported Archives in Mapping Objects

Hi All,
What is the Use of Imported Archives in Mapping Objects ( IR )
Regards
Vamsi

Hi Vamsi,
When we are doing JAVA , XSLT mappings we have to do import archievs
after developing the JAva mapping in NWDS and create jar file come back to IR under imported archieves we will import the jar file.
Similarly XSLT als make the zip and import under imported archieves
Also when we have any java packages ,import it under archieves and make them to use in UDF
See the below links
XSLT Mapping
/people/prasadbabu.nemalikanti3/blog/2006/03/30/xpath-functions-in-xslt-mapping
/people/sreekanth.babu2/blog/2005/01/05/design-time-value-mappings-in-xslt
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
XSLT Mapping with java enhancement
/people/pooja.pandey/blog/2005/06/27/xslt-mapping-with-java-enhancement-for-beginners
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-iii
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fxi%2fxi-design_configuration%2ffileValidationsinSAPXI-ACaseStudy.pdf
Check this thread...
Reusability of User-defined Functions
Check this thread...
Re: User-defined function in multiple Message Mappings
Using external JARs in Web Dynpro Dev.Component
see sap documentation:
http://help.sap.com/saphelp_nw04s/helpdata/en/4c/b2ad3de2d76b3be10000000a114084/frameset.htm
Cheers...
Vasu
** REward POints if found useful **

UDF and imported Archives

Hi,
We've created two classes in a package and created a jar file. Then we imported the JAR into the a namespace as an Imported Archive. In our UDF we imported the package. But when we test the map we get the following exception.
bad class file: /usr/sap/XXX/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map85e140e0dd6c11db8894001125a5ce17/classpath/CustomExceptionHandlers_0(xxx/xx/xi/mapping/udf/MyTestClass.class) class file has wrong version 49.0, should be 48.0 Please remove or make sure it appears in the correct subdirectory of the classpath.
Does anyone have an idea on the cause of this error?

Hi Gilder,
The same problem was solved here
Extraction of Auxiliary Key Figure
Java 1.4 creates class files labeled with version 48.0
Java 1.5 creates class files labeled with version 49.0
Java 1.4 can't run class files labeled with version 49.0
49 is the correct classfile version for 1.5.
If you're getting this error your runtime is 1.4 or earlier while your compiler is 1.5.
Hope it helps u out
Regards,
Prateek

Can't import archives

Hi,
For the last little while I've been using the archiving feature of FCPX and am now trying to access them... but failing. I have checked a few importing archives aritcles but they refer to the "Import from Camera" buttom which seems to ahve disappeared in my updated version of FCPX?
In the import window, there is a title "camera archives" but nothing is under it. I can navigate to where the archives are in the import window but they are all greyed out and so can't access them.
Any help would be much appreciated.

Have you moved the archives? They have to be in the Final Cut Camera Archives folder.

Urgent help required: Query regarding LC Variables

Hi All
Sometime earlier I was working on a performance issue raised by a customer. It was shell script that was taking almost 8-9 hrs to complete. During my research I came across a fact that there were some variables which were not set, the LC variables were impacting the sort funnel operations because of which the script was taking a long time to execute.
I asked them to export the following commands, after which the program went on smoothly and finished in a couple of mins:
export LC_COLLATE=en_US.ISO8859-1
export LC_MESSAGES=C
export LC_MONETARY=en_US.ISO8859-1
export LC_MONETARY=en_US.ISO8859-1
export HZ=100
export LC_CTYPE=en_US.ISO8859-1
export LANG=en_US.UTF-8
Later I did recover that setting the LC_COLLATE to C, is not helping and the program was again taking a lot of time. Few questions that I want to ask are:
1. Can someone please tell me, what each of these variable mean and how these values make a difference.
2. When I exported LC_COLLATE=en_US.ISO8859-1, it worked fine, but when i tried with the defalut value LC_COLLATE=C, then why the program didnt work.
As this issue is still going on, hence I would request All to provide their valuable inputs and let me know as much as possible.
Appreciate your help in this regard.
Thanks
Amit
Hi All
A new development in this regard. The customer has send us a screen shot in which they were trying to export the locale variable using the commands which I have pasted above. I can see in the screen shot that while exporting LC_COLLATE and LC_TYPE, they get a message that ""ksh: export: couldn't set locale correctly"".
Request everyone to please give their inputs as it's a bit urgent.
Thanks for all the help in advance.
Thanks
Amit
Some help required please...
Edited by: amitsinhaengg on Jul 22, 2009 2:03 AM
Edited by: amitsinhaengg on Jul 22, 2009 2:06 AM

LC_CTYPE
Controls the behavior of character handling functions.
LC_TIME
Specifies date and time formats, including month names, days of the week, and common full and abbreviated representations.
LC_MONETARY
Specifies monetary formats, including the currency symbol for the locale, thousands separator, sign position, the number of fractional digits, and so forth.
LC_NUMERIC
Specifies the decimal delimiter (or radix character), the thousands separator, and the grouping.
LC_COLLATE
Specifies a collation order and regular expression definition for the locale.
LC_MESSAGES
Specifies the language in which the localized messages are written, and affirmative and negative responses of the locale (yes and no strings and expressions).
You can use command
# locale -k LC_CTYPE
to see more detail about each type.

Help required - Sales order item is partially delivered but the item grayed

I have a sales order 123 having say item10 with qty 1, item20 with qty 10 , item 30 qty 12
Item 1 confirmed qty 1 and delivered qty is 1
Item 2 confirmed qty 10 and delivered qty 10
Item 3 confirmed qty 1 and delivered qty is 1
Now the item3 still has open requirements of 11 to be delivered. But the item is GRAYED OUT already.
even if I do ATP the qty is not confirming for the remaining 11 pieces.
Why is that? How to make that item out from GRAY.
How to confirm the remaining 11 qty for that item.
Help required as early as possible.
Appreciate ur help guys
Radha

hi Radha, how are you ?
     ---the partial deliveries in master data must have not been mentioned.
     ---the deliveries should be upto target quantity.
     ---check order type, item category and schedule line category.
     ---check unrestricted stock availability.
thank you
regards
Khera.

Imported Archive. Help required

Similar Messages

Maybe you are looking for