How to upload into import archive

How to import the XSL mapping and JCO LOOK UPS int to import archive archive
should i import java file or class file in look ups part , what abt the XSLT mappimg part, then i want to test the mapping part will you please tell me how to copy the already existing interface so that i can test the mapping part without distrubing it
thanking you
sridhar

Hi,
To test the XSLT Mapping:
-Zip the .xslt file and import the zip into Improted Archive
-Then create the new Interface Mapping or you can copy old Interface Mapping by right clicking on the Interface Mapping where you required to use XSLT mapping
btw, if you are using xslt or java mapping, you need to just use this in the Interface Mapping.
-In interface mapping, you can see the drop down list to select type of mapping and proceed further. It will direct you .
Hope this helps,
Rgds,
Moorthy

Similar Messages

Url (link) - how to upload into the my software

I have created a banner using fireworks cs3.
Assigned an absolute URL to hotspot.
It works when i preview in browser (F12)
I saved my banner.
I exported html and images.
here's where i'm totally lost. when I upload my banner into
my software , the url does not work. when I upload my html code the
url works but hte banner is all black. I'm very very green to
fireworks. I just want to upload banners into my software and have
the url work.
what do i have to do after i export the banner?
thank you in advance.

Do you have a page we can look at?
alex
imlost200 wrote:
> I have created a banner using fireworks cs3.
> Assigned an absolute URL to hotspot.
> It works when i preview in browser (F12)
> I saved my banner.
> I exported html and images.
> here's where i'm totally lost. when I upload my banner
into my software , the
> url does not work. when I upload my html code the url
works but hte banner is
> all black. I'm very very green to fireworks. I just want
to upload banners
> into my software and have the url work.
>
> what do i have to do after i export the banner?
>
> thank you in advance.
>
>

Issue in .class file in imported archive ESR - after upload using eclipse

Dear Friends,
My requirement here is too change existing java mapping. Here I am exporting zip file from imported archive and after making changes in eclipse upload the .JAR file again. Here .class file is not opening after upload in Imported Archive.
Error is
Setup I am having on my system.
-> JDK version on my system JDK 1.6_34
-> JRE on my system – JRE 6
-> Using eclipse SDK 4.2.2
SAP PI servers settings.
I searched online blogs but no help. Can anybody guide me what wrong am I doing here?
Thanks.
Sumeet.

Thanks for reply..Hareesh.
-> In Eclipse only 1 warning is coming and no error. I guess Eclipse automatically compile .class file. Is there any way in eclipse to see if compilation is done properly?
-> I imported few external JAR files and already few JAR files are there in Eclipse(JRE1.6), as shown in fig below. Which JAR file is being user? How can I make sure?
-> When using Run as option I am not getting any option. Is it normal or did I have to activate some option?
Please give your views on this.
Thanks.
Sumeet.

Imported archives

How to import externally defined mapping programs in to Imported archieves? could anybody help me....
Thanks in advance,
Manoj

Hi Manoj,
            XI supports 4 types of mappings
                        1. Message mapping
                        2. XSLT MApping
                        3. JAVA Mapping
                        4. ABAP Mapping.
                 If you go with message mapping or ABAP mapping no need to use imported archive. If you want to implement XSLT or JAVA mapping then only you need to import those programmes into imported archives. when import the external programms(XSLT or JAVA) to the Imported archives then should keep those file as a ZIP. The ZIP files only can import to the Imported Archives.
Thanks,
Satish

How to upload data into IT0000 using ABAP-HR program

Hello,
I'm required to upload data into multiple infotypes [IT000, 0001, 0002, etc] using single input text file. Can anyone able to guide me, how to upload data into IT0000 using ABAP program ?
Thanks in advance.
Regards
Prabhakar.
Message was edited by:
        Prabhakara Muthyal

Example code for HR_MAINTAIN_MASTERDATA to COPY IT0002
DATA: INT_0002_FINAL TYPE STANDARD TABLE OF PA0002 WITH HEADER LINE.
DATA: VALUES        LIKE PPROP OCCURS 10 WITH HEADER LINE,
RETURN        LIKE BAPIRETURN1,.
LOOP AT INT_0002_FINAL.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-PERNR'.
      VALUES-FVAL = INT_0002_FINAL-PERNR.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-BEGDA'.
      VALUES-FVAL = INT_0002_FINAL-BEGDA.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-ENDDA'.
      VALUES-FVAL = INT_0002_FINAL-ENDDA.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-nachn'.
      VALUES-FVAL = INT_0002_FINAL-NACHN.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-gblnd'.
      VALUES-FVAL = INT_0002_FINAL-GBLND.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-vorna'.
      VALUES-FVAL = INT_0002_FINAL-VORNA.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-rufnm'.
      VALUES-FVAL = INT_0002_FINAL-RUFNM.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-name2'.
      VALUES-FVAL = INT_0002_FINAL-NAME2.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-inits'.
      VALUES-FVAL = INT_0002_FINAL-INITS.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-famst'.
      VALUES-FVAL = INT_0002_FINAL-FAMST.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-gbdat'.
      VALUES-FVAL = INT_0002_FINAL-GBDAT.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-sprsl'.
      VALUES-FVAL = INT_0002_FINAL-SPRSL.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-anzkd'.
      VALUES-FVAL = INT_0002_FINAL-ANZKD.
      APPEND VALUES.
      VALUES-INFTY = '0002'.
      VALUES-FNAME = 'P0002-natio'.
      VALUES-FVAL = INT_0002_FINAL-NATIO.
      APPEND VALUES.
* maintain master data
      CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
        EXPORTING
          PERNR           = INT_0002_FINAL-PERNR
          ACTIO           = 'COP'
          BEGDA           = INT_0002_FINAL-BEGDA
*         ENDDA           = INT_0002_FINAL-ENDDA
          SUBTY           = SPACE
          NO_ENQUEUE      = SPACE
          DIALOG_MODE        = '0'
          TCLAS              = 'A'
        IMPORTING
          RETURN1         = RETURN
        TABLES
          PROPOSED_VALUES = VALUES
*         MODIFIED_KEYS   =
        EXCEPTIONS
          OTHERS          = 1.
      IF RETURN IS INITIAL.
        WRITE:/' Done....'.
      ELSE.
        WRITE:/   RETURN-ID, RETURN-TYPE, RETURN-NUMBER, RETURN-MESSAGE_V1, RETURN-MESSAGE_V2, RETURN-MESSAGE_V3, RETURN-MESSAGE_V4.
      ENDIF.
      CLEAR VALUES.
      REFRESH VALUES.
    ENDLOOP.

How to upload the Excel sheet into SAP

Hello Gurus,
Please let me know the steps how to upload excel sheet file in sap at one time.Suppose i have entered the employee details and their caste .This detail has been maintained in Excel.I want to know the total steps how to upload this total file into SAP System.
Regards
AM

. TCode : LSMW.
2. Enter Project name, sub project name and object name.
Execute.
3. Maintain object attributes.
Execute
select Batch Input recording
goto->Recording overview
create
recording name.
enter transaction code.
start recording
do recording as per ur choice.
save + back.
enter recording name in lsmw screen.
save + back
Now there will be 14 steps.
2. MAINTAIN SOURCE STRUCTURES.
Here you have to enter the name of internal table.
display change
create
save + back
3. MAINTAIN SOURCE FIELDS.
display change
select structure
source_fields->copy fields.
a dialogue window will come .
select -> from data file
apply source fields
enter No. of fields
length of fields
attach file
save + back
4. MAINTAIN STRUCTURE RELATIONS
display change
save + back
5. MAINTAN FIELD MAPPING & CONVERSION RULE
display change
click on source field, select exact field from structue and enter
repeat these steps for all fields.
save+back
6. MAINTAIN FIXED VALUES, TRANSACTION, USER DEFINED
execute
save + back
7. SPECIFY FILES.
display change
click on legacy data
attah flat file
give description
select tabulatore
enter
save + back
8. ASSIGN FILE
execute
display change
save + back
9. IMPORT DATA.
execute
display change
save + back
10. DISPLAY IMPORTED DATA
enter ok, it willl show records only.
back
11. CONVERT DATA
execute
display change
save + back
12. DISPLAY CONVERTED DATA
execute
display change
save + back
13. CREATE BATCH INPUT SESSION
tick keep batch input folder
F8
back
14. RUN BATCH INPUT SESSION.
sm35 will come
Object name will be shown here
select object & process
inputs given by KAPIL

Winmail.dat attachments after importing PST into online archive

Hi, we enabled the online archive feature on one of our Office365 exchange account. Later, we used the PST capture tool to import a PST file into the archive. Now after importing, the user came back saying he sees winmail.dat files as attachments. Prior
to uploading the PST to the online archive the attachments were visible normally. The PST file belongs to the same user. Its an old PST file attached to his mailbox since a long time. We then subscribed to the online archive plan for his account and used the
PST capture tool for importing the emails. To isolate the cause of the issue we tried dragging an email with an attachment from themailbox to the online archive from within Outlook. The moved email appeared correctly with attachment in his archive. We have
not tried importing the whole PST from within outlook, as the size of the PST is too large (32 GB). Could someone please help resolve the issue.
Thanks in advance.

I recommend that you post this in the Office 365 Exchange Online Forum:
http://community.office365.com/en-us/forums/158.aspx
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

CRM ABAP How to upload an Excel file into an internal table?

How to upload an Excel file using GUI_UPLOAD?? what should be the values of the parameters? The function modules ALSM_EXCEL_TO_INTERNAL_TABLE and KCD_EXCEL_OLE_TO_INT are not present in CRM. Please suggest me a way out!

Hi saurabh,
you can try the folowing sample..
and make modifications according to your requirement..
TYPE-POOLS: truxs.
DATA: i_text_data TYPE truxs_t_text_data,
v_filename_string TYPE string.
DATA: BEGIN OF itab OCCURS 0,
Name(30),
Phone(15),
Fax(500).
DATA: END OF itab.
PARAMETERS: p_file LIKE rlgrap-filename.
START-OF-SELECTION.
v_filename_string = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_filename_string
filetype = 'ASC'
has_field_separator = 'X'
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
dat_mode = ''
* IMPORTING
* FILELENGTH =
* HEADER =
TABLES
data_tab = i_text_data
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
i_field_seperator = 'X'
* I_LINE_HEADER =
i_tab_raw_data = i_text_data
i_filename = p_file
TABLES
i_tab_converted_data = itab
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
this is a sample code that uploads a excel file using GUI_UPLOAD, but uses another function module to convert that uploaded data into an internal table..
regards
satesh

How to upload data into ztables

Hi all,
How to upload data into ztables
plz sent the detail description as well sa sample programs

Hi Narendra,
Sample code to update the Z db table :
REPORT yupload.
TABLES ybtab.
DATA itab LIKE ybtab OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE = ' '
filename = 'C:\data.txt'
filetype = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = itab
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
INSERT ybtab FROM TABLE itab.
ENDIF.
Schedule this program as a Background Job with required time paramters .
Regards,
Ramganesan K.

I have taken pictures of items that are linked to a database that I am building. How can I bypass importing into iPhoto and simply downloading the images as "files" not "photos" so I can access them with my database? thanx.

I have taken pictures with both my Sony camera and my iPhone of items that are linked to a database that I am building, as well as my website. How can I bypass importing the images into iPhoto and simply downloading the images as "files" not "photos" so I can access them with my database? thanx.

If your Sony has a removable memory card you can use a card reader to copy the image files from to a folder on your Desktop and then move them anywhere you'd like.
Since the iPhone doesn't have a removable memory card you can try using Image Capture to see if you can manually upload the files to a folder on the Desktop.
If you have to import the photos, which are image files, into iPhoto you can then export them out of iPhoto to the Desktop and go from there to your database. Just because they are in iPhoto doesn't prevent you from using them elsewhere.
OT

How to upload a SAP request files into our PRD ?

dear all ,
there is a software installed on windows 2008, this software will connect to our SAP production server to collect some data.
there is a problem within the connection, the software vendors send some files with *.E6D Extension and ask us to install on SAP production server to resolve the problem.
the files are
K900086.E6D
K900096.E6D
K900102.e6d
R900086.E6D
R900096.E6D
R900102.e6d
i think these files are are change requests copied from the transport directory from a SAP DEV server
my question is how to upload or install these file into SAP PRD server?
thanks in advance
Mahmoud Younis

Hi,
Firstly copy the cofiles and datafiles of above mentioned requests into /usr/sap/trans .../cofiles and /data of PRD.
Then Login to PRD in default client
go to tcode STMS
select the production server
From Menu , Extras -> Other request , add each of these transport request into the import queue of PRD.
Then run the import of these requests as per the sequence specified.
Hope this answers your query.
Regards,
Deepak Kori

How do I share files uploaded into the Creative Cloud with other creative cloud members?

How do I share files uploaded into the Creative Cloud with other creative cloud members?

Should be easy. Try this...
In Thumbnails view, click the little triangle (pointing downward) in the lower-right corner of the asset you want to share.
In the blue icon bar that appears, click the Share icon (the third icon from the left, just right of the trash icon). The Share dialog should pop up.
In the Share dialog, enter the email address of the person with whom you want to share the asset, then click the Send Email button - they'll receive an email with a link to your asset. OR
You can also copy a link to the asset and then paste that into your own email client if you prefer. To do that, click the Link icon (looks like a "chain", and is to the right of the email "envelope" icon) - then click the Copy Link button.
Note that the Share options won't be available if your asset is set to "Private" - you can control whether an asset can be viewed (or downloaded) by others by clicking the Public/Private control (green or red "lock" icon).
You can also access the same Share controls if you click on the file to see it one-up (you can do this from either Thumbnails view or List view); click the Share icon near the upper right corner of the browser window (to the right of the asset name).
Hope that helps.

How can one read a Excel File and Upload into Table using Pl/SQL Code.

How can one read a Excel File and Upload into Table using Pl/SQL Code.
1. Excel File is on My PC.
2. And I want to write a Stored Procedure or Package to do that.
3. DataBase is on Other Server. Client-Server Environment.
4. I am Using Toad or PlSql developer tool.

If you would like to create a package/procedure in order to solve this problem consider using the UTL_FILE in built package, here are a few steps to get you going:
1. Get your DBA to create directory object in oracle using the following command:
create directory TEST_DIR as ‘directory_path’;
Note: This directory is on the server.
2. Grant read,write on directory directory_object_name to username;
You can find out the directory_object_name value from dba_directories view if you are using the system user account.
3. Logon as the user as mentioned above.
Sample code read plain text file code, you can modify this code to suit your need (i.e. read a csv file)
function getData(p_filename in varchar2,
p_filepath in varchar2
) RETURN VARCHAR2 is
input_file utl_file.file_type;
--declare a buffer to read text data
input_buffer varchar2(4000);
begin
--using the UTL_FILE in built package
input_file := utl_file.fopen(p_filepath, p_filename, 'R');
utl_file.get_line(input_file, input_buffer);
--debug
--dbms_output.put_line(input_buffer);
utl_file.fclose(input_file);
--return data
return input_buffer;
end;
Hope this helps.

How to Extract data from a flat file and how to upload it into table

Hi
i want to extract the data from a web page, that data i want to keep in text file.
from the text file i want to read it and i want to upload into table
can any one help me its very urgent

here is my 20min try without debugging (needs a rs232 and loopback connector )
use the probe and highlight the dataflow to see how it works.
as always: there are many ways to solve your problem
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'
Attachments:
read write file to RS232.vi ‏69 KB

I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it. I need the videos out of there. I have tried every way I can think of.

Like the title says...
I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it. I need the videos out of there. I have tried every way I can think of.
I have also tried from the iphoto side, to export the videos or share them to final cut. I have had no luck.
I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible. I see this on forums and youtube videos of the older versions.
However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
Thank You for the Help

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

How to upload into import archive

Similar Messages

Maybe you are looking for