Importing development class into SAP from out site

Hi Guys,
I am integrating SAP-GIS Using Smallworld business integrator 4 for SAP.
In the doumentaion they asked to import
K900363.DEV
D900363.DEV
R900363.DEV
into SAP from SBI4 with TR
All development classes are located in one single transport request:
DEVK900363.
can any body tell me what is the procedure to do in SAP.
how to import into SAP Development class?
thanks in advance.
rgdasari

Dear Prasada,
  The document what we got with SBI4(integrator for SAP and Smallworld)is giving below. full description giving below.I am a ABAP with BAPI Consultant.I don't have BASIS knowledge.if possible pls send me in detail where we need to which TRCOD we need import those .dev files and how to create ne Dev clall with Given TR requerst..ect..
Importing the Business Integrator source files You import the Business Integrator sources for SAP as transport files. To transport development objects from one SAP system to another, you create a Request. Different kinds of requests exist. Change Requests usually transport
changes from one known system into another in a known Target Transport Layer. This is the usual method in an SAP environment in which you have a development system, a quality system and a production system. For the Business Integrator SAP sources, Transport of Copies is used. All objects from the Business Integrator are included in the development classes ZPLUG, ZPL_DDIC, and ZPLUG_EXT. They are packed in one single transport file. Ask your SAP system administrator to import the files into the SAP environment.When you import copies into different systems, in the development class, the properties TRANSPORTLAYER and HOMESYSTEM do not change. You must change them manually using transaction SE03 (Transport Organiser Tools). Select CHANGE OBJECT CATALOG ENTRIES and select R3TR DEVC xxx (xxx stands for the development class, for example, ZPLUG). Press F8 to change the TransportLayer, the owner, and the home system of the development class. Repeat this for all three
development classes (ZPLUG, ZPL_DDIC and ZPLUG_EXT).

Similar Messages

  • How to Import XML file into SAP B1

    Dear All,
    I have a scenario like,
    I am receiving a XML file from a 3rd party application for the daily Creation,Update of Item Master,BP Master, Marketing Documents. I want to import this file into SAP B1 through its approp objects. I understand DTW has limitation in its file types (Semicolo,Tab,Comma,ODBC). How do i do this ? Please guide me.
    Thanks,
    Thanga Raj K

    Hy folks,
    I´m frim Brasil and I've been studying the tool EFM (Eletronic File Manager) to learn more about it!
    There I saw that we can extract to XML "any" infomation from the database we want, mainly through the GEP.
    However, as I've seen, this Add-On can not import any XML file into SBO, unless for the BFP wich can be imported in conjunction with the BTHF Add-on.
    So I ask: how is it possible to import XML data into SBO database? Is it possible to be done through the EFM? or  it´s really necessary to write a code specifically to do that?
    Besides, I know that de B1iSN fit to this necessity... but when I tried to use it, by the custom "object" for BP, for example, there are some data wich the mapping conteined in this custom "process" that can not be imported... I tried to understand how to map those other fields not imported by the custom but this has been dificult to me as I am a implementation consultant focused in administrative process not on development...
    Could you please help me with this subject!
    Thanks a lot,
    Denis

  • Problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007

    Gentlemen,
    I have a problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007,
    My current Support Package Level is:
    SAP_ABA       700     0015
    SAP_BASIS     700     0015
    PI_BASIS      2006_1_700     0006
    ST-PI     2005_1_700     0006
    CRMUIF         600     0003
    SAP_BW       700     0017
    SAP_AP                700     0012
    BBPCRM                600     0002
    First I had the following error:
       Syslog: k CQ3 : UMGSETTING&                                          rscpexcc 12
       GetDBMigrateCodePagesLangs uses TCP0D, TCPDB, TCP0C.
         0 entries from FUNCT (%/SAPCND/CNF_GET_RECORD_FROM_DB%) deleted.
         0 d /   0 i /   0 u /   6 = 100% ucf FUPARAREF
         6 entries for FUPARAREF imported (/SAPCND/CNF_GET_RECORD_FROM_DBA*).
         0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
         0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
         0 d /   0 i /   0 u /   1 = 100% ucf TFTIT
         1 entry for TFTIT imported (D/SAPCND/CNF_GET_RECORD_FROM_DB*).
       successfully set a temporary lock on table REPOSRC
       REPOS /SAPCND/LDETERMINATION$14                A replaced.
       REPOS /SAPCND/LDETERMINATIONU14                A replaced.
        [dev trc     ,00000]  Wed Nov 26 16:33:14 2008                         1315447  8.171484
        [dbdsoci.    ,00000]  *** ERROR => invalid offset 0 for placeholder 16
                                                                                    71  8.171555
       unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,
       dsql_open returned with unexpected error code 2
       Please contact the SAP support.
       End of Transport (0016).
       date&time: 26.11.2008 - 16:33:14
       5 warnings occured.
       3 errors occured.
       Main import
       End date and time : 20081126163314
       Ended with return code:  ===> 16 <===
    After I got this error I upgraded the Kernel from patch level 159 to 179,
    After that I restarted the update again but the system is still running on u201CIMPORT_PROPERu201D and dose not given any update,
    From Import logs of the queue I can see the following,
       Summary:
        24 DOCUT imported.
        16 DYNPS imported.
        30 DYNPT imported.
       387 REPOS imported.
        43 REPOT imported.
       Totally 505 Objects imported.
       Totally 3636 tabentries deleted.
       Totally 14 objects activated.
       Totally 12229 tabentries imported.
       62066888 bytes modified in database.
        [dev trc     ,00000]  Wed Nov 26 18:14:19 2008                         20996974  40.917838
        [dev trc     ,00000]  Disconnecting from ALL connections:                   30  40.917868
        [dev trc     ,00000]  Disconnecting from connection 0 ...                  287  40.918155
        [dev trc     ,00000]  Closing user session (con_hdl=0,svchp=00000000003005B8,usrhp=00000000002FB748)
                                                                                  5759  40.923914
        [dev trc     ,00000]  Detaching from DB Server (con_hdl=0,svchp=00000000003005B8,srvhp=00000000061530E8)
                                                                                    921  40.924835
        [dev trc     ,00000]  Now I'm disconnected from ORACLE                    8230  40.933065
        [dev trc     ,00000]  Disconnected from connection 0                        90  40.933155
        [dev trc     ,00000]  statistics db_con_commit (com_total=527, com_tx=307)
                                                                                    59  40.933214
        [dev trc     ,00000]  statistics db_con_rollback (roll_total=0, roll_tx=0)
                                                                                    52  40.933266
       Disconnected from database.
       End of Transport (0004).
       date&time: 26.11.2008 - 18:14:19
       2 warnings occured.
       Main import
       End date and time : 20081126181419
       Ended with return code:  ===> 4 <===
    Please advice me.
    Regards,
    Ahmed

    I have similar problem while updating support packages in SAP R/3 4.6C environment. 
    000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
    000 dsql_open returned with unexpected error code 1                                                                             
    000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
    000 dsql_open returned with unexpected error code 1                                                                             
    Here is an outline of series of events that happened:-
    We are applying in support packages in SAP R/3 4.6C HR Development
    (TFI) environment. We planned with installing all the SP stacks
    starting from 1 to 9.
    -Updated kernel, tp , r3trans and SPAM level to latest level.
    We received the following error in Import_Proper step of Support
    package upgrade. Though the step has been repeated after making sure
    that we have all the required files at OS level, we go this error
    repeatedly.
    Main import
    Transport request___: SAPKB46C52
    System______________: TFI
    tp path : tp
    Version and Release: 305.13.25 46D
    check-sum error in datafile after 9374854 bytes.
    Main import
    End date and time : 20081205192603
    Ended with return code: ===> 16 <===
    When we renamed Co-File & data_file at OS level to see if the files are
    created again and reran we got the following error.
    Main import
    Transport request___: SAPKB46C52
    System______________: TFI
    tp path : tp
    Version and Release: 305.13.24 46D
    Main import
    End date and time : 20081205185117
    Ended with return code: ===> 12 <===
    We tried importing the individual support package SAPKB46C52 from STMS
    and the transport cancelled at an earlier step with the same error.
    Dictionary import
    Transport request___: SAPKB46C52
    System______________: TFI
    tp path : tp
    Version and Release: 305.13.25 46D
    check-sum error in datafile after 9374854 bytes.
    Dictionary import
    End date and time : 20081205195929
    Ended with return code: ===> 16 <===
    While playing around I have deleted the transport from the tp buffer
    and added manually, before doing so I made a backup of tp buffer at OS
    level and I got following error though I reverted back to backed-up
    copy.
    - Error in phase: IMPORT_PROPER
    - Reason for error: TP_BUFFER_INCONSISTENCY
    - Return code: 0008
    - Error message: Wrong sequence of Packages in the tp buffer (e.g.
    SAPKB46C52 )
    I then tried to disassemble the package separately and reran the
    import queue. Now I have RC 8 on that support package.
    When I did R3trans -l on the datafile it completed successfully.
    D:\>R3trans -l \usr\sap\trans\data\RB46C52.SAP
    This is R3trans version 6.05 (release 46D - 27.10.08 - 16:32:00).
    R3trans finished (0000).
    I verified the size of file "CSR0120031469_0023301.PAT" and it is the
    same as mentioned in SSP.
    Let us know is there is a workaround.

  • Import development class

    Hello ,
    I  bought a book "ABAP OO"  .This book comes with  cd with development class and examples.
    Unfortunately  explanation how to import development class in  mini sap system are not very detailed.
    Can someone give me advice on this subject .  Where I can find information  , and procedures   for
    importing   development class.
    Thank you
    Krsto

    Hi,
    You can import the data and cofiles from OS level, you can copy them to particular data and cofiles folder
    \usr\sap\trans\data and \usr\sap\trans\cofiles and then import them using STMS to your system.
    In case you don't have OS access, you can put the data and cofiles using the function module "archivfile_client_to_server" you have to maintain Path(source file path i.e on your my documents foldrer) and target path( \usr\sap\trans\data for data file and \usr\sap\trans\cofiles for the cofiles) and execute the function module.
    After this you can import the files to the system using STMS, add the transports using Extras> other requests> add and the import it.
    Please revert in case of any confusions.
    Regards,
    Sarita

  • How to create Development Class in SAP R/3 4.7c and Netweaver?

    I follow some old notes on ABAP Development Class but I could not create a new Development Class. i.e. Stuck in creatinf a type group.  Please give some details on how to create a development class.  Thanks.
    see the following stepa:
    (A) Procedure for creating  a type group:
    /nse80
    1. Object Navigator> select Development class>(Enter your development class
       yFTGxxDEV
    2. Double click on development class object types.
    3. Type Group: zPTAxx1.
    4. Click on the Create button at the bottom (4th one from the left).
    5. Enter short text: zPTAxx1 type group.
    6. Save>Enter your development class> click on diskette button to save the type group
    7. Select Source Code tab and enter the following:
    "An example type-pool statement containing types and constants
    type-pool zxx1.  "zxx1 is a type pool. It is also known as a type group
    types: zxx1_dollars(16)    type p decimals 2,
                 zxx1_lira(16)          type p decimals 0.
    constants:
           zxx1_warning_threshold type i value 5000,
           zxx1_amalgamation_date like sy-datum value '19970305'.
    8. Select  Type Group from menubar
               a) Check
               b) Save
               c) Activate
    9. Click the back button or F3 to exit.
    10, Show  your type group to your teacher.
    11. Go to ABAP editor and enter the following program:
    "Calculations on date
    report zxx_0914.
    type-pools zxx1.                   "contains zxx1_amalgamation_date
    data:    d1              like sy-datum,
                d2              like d1,
                num_days type p.
    d1  = d2 = sy-datum.
    subtract 1 from d1.
    write / d1.                              "yesterday's date
    d2+06 = '01'                         " first day of current months
    subtract 1 from d2.
    write / d2.                           " last day of previous month
    num_days = sy-datum - zxx1_amalgamation_date.
    write / num_days.                " number of days since amalgamation
    11. Double click zxx1 from the type-pool statement to see the type group.
    12. Follow lab1 procedure and run your program
    (B) Run an ABAP program using field symbol ( i.e. pointer)
    report zxx_lab6.
    data  f1(3)  value   'ABC'.          "Step 1 Define a variable
    field-symbols <f>.                     "Step 2 Define a pointer variable ( it only stores address)
    assign f1 to <f>.                        "Step3 Initialize the pointer variable with an address
    write <f>.                                    "Step4 Now you can use <f> in place of f1
    write / f1.                                      " (same as write f1 )  
    <f> = 'xyz'.                                   " Assign a new value to f1
    write <f>.
    write / f1.

    This is not the way to create a new development class.
    Follow this steps to create a development class:
    http://sap.mis.cmich.edu/abap4/knowbase/Create-Dev-Class.pdf
    Regards,
    Naimesh Patel

  • Importing WebService class into Forms10g

    Hi ,
    I want to import webservice from Jdeveloper in Forms10g.I am using Jdeveloper 10.1.3.4 complaint with JDK 1.4. When I import the class in Forms10g from Jdeveloper it gave me error:
    Importing Class Proxy.classes.oracle.srtutorial.datamodel.proxy.SendServiceSoapClient...
    Exception occurred: java.lang.UnsupportedClassVersionError: Proxy/classes/oracle/srtutorial/datamodel/proxy/SendServiceSoapClient (Unsupported major.minor version 49.0)
    I figured out that this error is due to different versions of JDK used in Oracle Forms10g(JDK 1.3) and Jdeveloper 10.1.3.4(JDK 1.4). So I changed the compile properties in Jdev to 1.3.
    After changing this to 1.3 when I import the class the previous error is resolved but I get another error :
    Importing Class Proxy.classes.oracle.srtutorial.datamodel.proxy.SendServiceSoapClient...
    Exception occurred: java.lang.NoClassDefFoundError: Proxy/classes/oracle/srtutorial/datamodel/proxy/SendServiceSoapClient (wrong name: oracle/srtutorial/datamodel/proxy/SendServiceSoapClient)
    Please help how to resolve this.
    Regards,
    Noman
    Edited by: user773433 on Aug 11, 2009 4:33 AM

    Hi,
    I have tried. The problem is when I make the JAR file in Jdeveloper and Change the class path in Windows. The Jar doesnt shows up in Formgs10g when we import the class. I have tried several times by adding the path of JAR file in windows environment but still it doesnt shows up..
    Regards,
    Edited by: user773433 on Aug 12, 2009 10:54 AM

  • How to Download the development class into Hard disk

    Hi Experts,
    i have same problem in package, i want save these objects like data dictionary objects,programs,includes,messages class, class library and etc...
    save into local disk.
    pls give the step by step process
    thanks for advance,
    venu m

    Hi venu,
    <b>Download Program from a Development Class:</b>
    First check in tadir that the given package is valid
    SELECT SINGLE devclass FROM tadir INTO ws_devclass WHERE devclass = p_devcls.
    Select all the records from TADIR table where OBJECT = 'FUGR' and PGMID = 'R3TR '.
    In this way u can get all the FUnction group for that package.
    For getting the function module under the function module use the FM RS_FUNCTION_POOL_CONTENTS to get all the function module under the Function group.
    Usign the table tfdir get the program name of the Function module.
    Using the FM 'GET_INCLUDETAB' get all the includes
    for that PRogram name.
    Loop at the internal table which you got from the function module.
    Use the READ REPORT prog INTO itab.
    Download the contents to the place where you want.
    Also refer:
    http://www.sap-img.com/abap/download-and-upload-your-abap-program.htm
    Hope it is helpful.
    Manish
    Message was edited by:
            Manish Kumar

  • Import Serial numbers into MIGO from Excel

    Hi there
    We would like to be able to import serial numbers from a spreadsheet into MIGO.
    We purchase from vendors and they ship directly to the customer and provide us with a spreadsheet of serial numbers. These then are manually imput into SAP by copying them six at a time. Is there a way we can import the serial numbers directly into MIGO?
    Thank you
    Tiri

    Hi
    I am experiencing the same issue.  I need to create up to 3000 serial numbers in MIGO at a time.  In IQ04 I am able to create a numeric list.  However our serial numbers are alpha numeric or numeric ending in a test figure.  Copy and past only allows 28 entries.  I do have the serial numbers in electronic format.
    You are referring to upload functionality, but don't seem to find the "button" or function to upload from text or excel.
    Anybody able to assist?
    Regards

  • Importing Adobe form into SAP (sfp)

    Hi Friends
    I am trying to import an Adobe form designed in Live cycle designer outside SAP into SAP form builder (tcode SFP). The form imports fine in 'Layout' section of form builder but when I save it, it doesn't get saved. I mean if I save and try to open form later in SFP tcode the saved form disappears. The form also disappears when I activate the from in SAP builder (tcode SFP).
    Am I doing anything wrong while importing pdf file or form designed outside SAP? Please help.
    Regards
    Sunny

    Hello,
    I am aware its is possible to use "import" in SFP menu. But I don´t know how. I would like to assure you, you can just copy the layout in your source form (it was just some layout created in standalone LCD) and copy it into the opened layout (LCD in SAP) in your SFP transaction. Then the editor think you have just finished drawing that and everything works the way you expect.
    Regards, Otto

  • Import data Automatically into SAP

    Hi all,
    Is is possible to import data Automatically in SAP?
    For Ex: if the client having online filling form (through website) is is possible to upload data directly into SAP?
    one getting the alert or approval they will add the document.
    Regards
    Anish

    Hi Anish,
    This can be done through scheduled DTW job.
    Thanks,
    Gordon

  • Can I import CD's into iTunes from an external Firewire CD/DVD player?

    The CD/DVD player on my iMac G4 broke and just wondering if I can hook up a cheap external Firewire CD/DVD drive (with RW capability) to my iMac and still be able to view DVD's and import CD's into iTunes?
    Thanks for any answer to this question.
    Thanks,
    Dave

    Yes - connect the ext device - open iTunes - load a CD - it shouold appear in the left most column of iTunes under Devices - rip away.
    To use that same ext device to burn then go to iTunes prefs>Advanced>Burning and select it from the drop down menu.
    MJ

  • Error while importing java class into oracle forms 10g

    Hi
    I have generated a web service client using jdeveloper 10g. It consists of complex type methods. I am trying to import the class files using java importer in oracle form 10g. I am able import all of them successfully except one. That one is the main method. Please see the error and suggest me how to overcome this error.
    Exception occurred: java.lang.NoClassDefFoundError: oracle/jdeveloper/webservices/runtime/WrappedDocLiteralStub
    Thanks in advance

    Do you see oracle/jdeveloper listed in "Import Java Classes" when you try to import?
    If not, make sure you add C:\DevSuiteHome_1\jdev\lib\jdev.jar to FORMS_BUILDER_CLASSPATH in registry
    Also excetion indicates: oracle/jdeveloper/webservices/runtime/WrappedDocLiteralStub
    If you typing it - type: oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub

  • Regarding Upload of data into SAP from Application server using DATA SETS

    Hi all,
    I have a problem when uploading data that is application server [.txt file] into SAP using OPEN DATA SET,READ DATA SET & CLOSE DATA SET it is now going to dump. The file is actually splits the fields by using Tab Delimiter.  
    During uploading some junk values are coming with '#' so it going to dump and giving follow type of error.
    Runtime Errors         CONVT_NO_NUMBER          
    Exception              CX_SY_CONVERSION_NO_NUMBER
    Unable to interpret "#0#0#0#0#0#0#0#" as a number.
    Can any one solve the above issue as i need it urgently.
    Thanks in advance.
    Thanks & Regards,
    Rayeezuddin.

    Hi Hielman,
    Thnaks for that reply and for effort you are putting to solve my issue.
    I had done the same thing what u have posted prior to your reply but still i am getting dump.
    FORM f_get_legacy_data .
      DATA: l_tab type xstring,
            l_tab1(1) type c,
            s type x.
      move '23' to l_tab.
      move l_tab to l_tab1.
    OPEN DATASET v_pfile FOR INPUT IN TEXT MODE ENCODING DEFAULT.
      OPEN DATASET v_pfile FOR INPUT IN TEXT MODE ENCODING DEFAULT.
    IF sy-subrc <> 0.
       MESSAGE text-207 TYPE c_e.
    ELSE.
      DO.
        CLEAR wa_input1.
       READ DATASET v_pfile INTO wa_input1.
        READ DATASET v_pfile INTO wa_read.
        IF sy-subrc EQ 0.
          move wa_read to i_txt-txt.
          append i_txt.
        ELSE.
          EXIT.
        ENDIF.
      ENDDO.
      s = '09'.
      loop at i_txt.
       move i_txt-txt+10(1) to l_tab1.
       move '#' to l_tab1.
       split i_txt-txt at s into wa_input1-vbeln wa_input1-posnr
        split i_txt-txt at '#' into wa_input1-vbeln wa_input1-posnr
                                       wa_input1-per0bal wa_input1-per1val
                                       wa_input1-per2val wa_input1-per3val
                                       wa_input1-per4val wa_input1-per5val
                                       wa_input1-per6val wa_input1-per7val
                                       wa_input1-per8val wa_input1-per9val
                                       wa_input1-per10val wa_input1-per11val
                                       wa_input1-per12val.
        APPEND wa_input1 TO i_input1.
        CLEAR wa_input1.
      endloop.
    ENDIF.
      CLOSE DATASET v_pfile.
      IF i_input1[] IS INITIAL.
    If there is no data in the legacy file or if the structure of the
    legacy data does not match with that of internal table error message
    need to be displayed.
        MESSAGE text-211 TYPE c_e.
    *&--begin of change--
      ELSE.
        CLEAR: wa_input, wa_input1.
        LOOP AT i_input1 INTO wa_input1.
         MOVE wa_input1 TO wa_input.
          MOVE: wa_input1-vbeln TO wa_input-vbeln,
                wa_input1-posnr TO wa_input-posnr,
                wa_input1-per0bal TO wa_input-per0bal,
                wa_input1-per1val TO wa_input-per1val,
                wa_input1-per2val TO wa_input-per2val,
                wa_input1-per3val TO wa_input-per3val,
                wa_input1-per4val TO wa_input-per4val,
                wa_input1-per5val TO wa_input-per5val,
                wa_input1-per6val TO wa_input-per6val,
                wa_input1-per7val TO wa_input-per7val,
                wa_input1-per8val TO wa_input-per8val,
                wa_input1-per9val TO wa_input-per9val,
                wa_input1-per10val TO wa_input-per10val,
                wa_input1-per11val TO wa_input-per11val,
                wa_input1-per12val TO wa_input-per12val.
          APPEND wa_input TO i_input.
          CLEAR: wa_input, wa_input1.
        ENDLOOP.
      ENDIF.
    ENDFORM.                    " GET_LEGACY_DATA
    When i am giving input as
    Directory  /pw/data/erp/D5S/fi/up
    Name: Backlog1616_D1S.txt
    BKCOPO1           BKSOI1        1000.00                100.00                 -200.00                0                      0                      0                      0                      0                      0                      0
    BKSOPO2           BKSOI2        2222.22                0                      300                    0                      0                      0                      0                      0                      0                      0
    BKSOPO3           BKSOI3        -3000                  400                    0                      0                      0                      0                      0                      0                      0                      0
    BKSOPO4                         4000.55                500                    600                    0                      0                      0                      0                      0                      0                      0
    0040000000        000010        -100                   -110                   -110                   0                      0                      -600                   0                      0                      0                      0
    0040000001        000010        -110                   -110                   0                      0                      0                      -610                   0                      0                      0                      0
    I am getting i_input internal table populated as follows at the end of that subroutine.
    After appending [APPEND wa_input TO i_input].
    BKCOPO1#BK|000000|            0.00 |            0.00 |            0.00    |
    BKSOPO2#BK|000000|            0.00 |            0.00 |            0.00    |
    BKCOPO3#BK|000000|            0.00 |            0.00 |            0.00    |
    BKCOPO4##4|000000|            0.00 |            0.00 |            0.00    |
    0040000000|000000|            0.00 |            0.00 |            0.00    |
    0040000001|000000|            0.00 |            0.00 |            0.00    |
    And output is showing erronious records: 6
    No entries inserted.
    Can you solve this issue.

  • Importing java classes into jsp page

    I'm trying to import java classes inside my jsp page, while doing that i am getting compilation error "package uma.natarajan.javaclasses" not found. I don't know where to copy the java files. i'm keeping my jsp files under public_html folder
              

    Hi uma,
              create uma\natarajan\javaclasses under weblogic_home\myserver and copy java
              classes(u want to import) to uma\natarajan\javaclasses and then u try.
              Concept is the java classes u import should be present in a classpath. Hope
              this may help u,
              Arun,
              [email protected]
              "uma natarajan" <[email protected]> wrote in message
              news:3a490bcb$[email protected]..
              > I'm trying to import java classes inside my jsp page, while doing that i
              am getting compilation error "package uma.natarajan.javaclasses" not found.
              I don't know where to copy the java files. i'm keeping my jsp files under
              public_html folder
              

  • How do I import a song into GarageBand from 'Music'

    how do I import a song which is in 'music' on my iPad into 'GarageBand' on the same iPad - I do not use the Cloud currently but I should not need to for this simple import (sorry, just starting to use the iPad today for the first time) thx

    I believe at the moment the only way to import new samples into GarageBand is via the File Sharing feature of iTunes when it is connected to a computer. iCloud won't help as each app is sandboxed and can generally only access its own files. Transfer of data between apps is possible but is tightly controlled and mediated by iOS rather than by simply sharing files between applications as you would on a computer.
    tt2

Maybe you are looking for