Import development class

Hello ,
I bought a book "ABAP OO" .This book comes with cd with development class and examples.
Unfortunately explanation how to import development class in mini sap system are not very detailed.
Can someone give me advice on this subject . Where I can find information , and procedures for
importing development class.
Thank you
Krsto

Hi,
You can import the data and cofiles from OS level, you can copy them to particular data and cofiles folder
\usr\sap\trans\data and \usr\sap\trans\cofiles and then import them using STMS to your system.
In case you don't have OS access, you can put the data and cofiles using the function module "archivfile_client_to_server" you have to maintain Path(source file path i.e on your my documents foldrer) and target path( \usr\sap\trans\data for data file and \usr\sap\trans\cofiles for the cofiles) and execute the function module.
After this you can import the files to the system using STMS, add the transports using Extras> other requests> add and the import it.
Please revert in case of any confusions.
Regards,
Sarita

Similar Messages

Importing development class into SAP from out site

Hi Guys,
I am integrating SAP-GIS Using Smallworld business integrator 4 for SAP.
In the doumentaion they asked to import
K900363.DEV
D900363.DEV
R900363.DEV
into SAP from SBI4 with TR
All development classes are located in one single transport request:
DEVK900363.
can any body tell me what is the procedure to do in SAP.
how to import into SAP Development class?
thanks in advance.
rgdasari

Dear Prasada,
The document what we got with SBI4(integrator for SAP and Smallworld)is giving below. full description giving below.I am a ABAP with BAPI Consultant.I don't have BASIS knowledge.if possible pls send me in detail where we need to which TRCOD we need import those .dev files and how to create ne Dev clall with Given TR requerst..ect..
Importing the Business Integrator source files You import the Business Integrator sources for SAP as transport files. To transport development objects from one SAP system to another, you create a Request. Different kinds of requests exist. Change Requests usually transport
changes from one known system into another in a known Target Transport Layer. This is the usual method in an SAP environment in which you have a development system, a quality system and a production system. For the Business Integrator SAP sources, Transport of Copies is used. All objects from the Business Integrator are included in the development classes ZPLUG, ZPL_DDIC, and ZPLUG_EXT. They are packed in one single transport file. Ask your SAP system administrator to import the files into the SAP environment.When you import copies into different systems, in the development class, the properties TRANSPORTLAYER and HOMESYSTEM do not change. You must change them manually using transaction SE03 (Transport Organiser Tools). Select CHANGE OBJECT CATALOG ENTRIES and select R3TR DEVC xxx (xxx stands for the development class, for example, ZPLUG). Press F8 to change the TransportLayer, the owner, and the home system of the development class. Repeat this for all three
development classes (ZPLUG, ZPL_DDIC and ZPLUG_EXT).

A classpath error while importing a class with @page import property

Hi ,
I am using Tomcat contaniner for jsp applications. I have developed a page that i have import a class. when i use
<%@ page import="myclass" &>
i got an error that myclass not found. I have placed into tomcat\webapps\myproject\web-inf\classes directory. So How will I set the classpath for myclass to work?
thanks.

I was able to simulate your problem when I created a mismatch in the case of the name of the class.
for example if my program is called MyClass.java
and in the import I do <@page import="myclass" %>
Are you sure about the case of class name that you are using? Please check that the file is called myclass.java the class defined inside it is called myclass and the class file that is copied into the WEB-INF/classes directory is also myclass.class. There should be no difference in the case of the names. like MyClass.java or MyclaSS.class
Other things to check are
1. If myclass is defined in a package then you have to import with the package.
2. Make sure that your jsp is located in the myprojects directory and the class file is copied under myprojects/WEB-INF/classes.
Let me know if things still don't work
regards,
Abhishek.

Forms 10.1.2 - Imported Java Classes are not running on JNI.NEW_OBJECT call

Hi All,
I've created a java class to call a webservice. This has been developed and tested in JDeveloper and works ok (using JDev Wizards - so it's generated code). I've created the JAR from it, imported the classes into Forms Builder and have my package and imported the java exception_ class too.
So, everything compiles and looks good. When I run the application I can see in the console that my JAR is included in the loaded list. When I call the class (basing my code on the Forms Webservice example here on OTN) it doesn't work. I get the error ORA-6503 - function returns no value.
I can step through the code in debug and it's in the generated constructor "new" function when the JNI.NEW_OBJECT is executed. I can't see into that so I'm a bit stuck ... I don't whether it's my java that is now failing or the system is failing to call it :
FUNCTION new(
    a0    VARCHAR2) RETURN ORA_JAVA.JOBJECT IS
BEGIN
    args := JNI.CREATE_ARG_LIST(1);
    JNI.ADD_STRING_ARG(args, a0);
    RETURN (JNI.NEW_OBJECT('oracle/forms/atrium/wsexport/proxy/AtriumExportWSSoapHttpPortClient', '(Ljava/lang/String;)V', args));
END;Has anyone any experience or pointers for me ?
Are there any extra JAR files I need to include in the CLASSPATH ?
Forms Builder is 10.1.2.0.2, the Application Server is 10.1.2.3 and it JDeveloper 10 compiling Java 1.4. All on a Windows platform.
TIA
Steve

Not sure if this is exact the document you are searching for, but this one works for me:
http://www.oracle.com/technetwork/developer-tools/forms/webservices-forms-11g-094111.html
It's for 11g, but I don't think there is much difference to 10g.
Did you add your Jar file also to the classpath in the environment file of your webconfig?
cheers
Edit: too slow somehow -.- heading for a cup of black coffee
Edited by: christian erlinger on 03.09.2010 01:18

"Import Java Classes"in Oracle6i Forms

Hello
I have two questions regarding importing java classes in Forms 6i
1- How we can add my own class to this list, so that I can import it directly in form 6i and use it?
2- When these classes are used in form development, are they fully imported to client side or only class wrapper is ported to forms. I m asking this question, cuz I want to develop my application with all bussiness logic(Java classes) in middle tier ie Form Server.
Can anyone guide me in this regard
Thanks in advance
Asif

OK answers to the questions are:
1) If your class is on the classpath it will be picked up by the Java importer but you have to restart Forms if you add the class to the path
2) THe java importer is for middle tier. In Forms, all ofthe application logic is on the middle tier and if you want it integrate this with Java the importer will create a PLSQL wrapper to call the Java - in pretty much the same way as ORA_FFI. (So NOT imported into the client)
There are some white papers on OTN.
Regards
Grant

Classpath problems when importing my classes

I'm using a tutorial with sample programs dealing with bank accounts.
I get this error:
InterestBearingAccount.java [9:1] '.' expected
import Account;
^
1 error
Errors compiling InterestBearingAccount.
The Account class already exists in the current directory. I've tried everything as far as setting the classpath variable (nothing, just a period, period & slash, the actual complete path for the current directory, nothing works!!!!!). I also tried using -classpath (.) and the end of my javac command and that seemed to not work at all.
The Java Coffee Break tutorial have some already compiled (*.class) files and they run fine. My *.java files are identical. In fact, I cut and pasted them so I know it's not a typo.
My path is set to include the jdk1.4.0\bin directory and I've only begun to have problems now that I need to import existing classes into the programs.
I should mention that I get the same error using Forte environment or doing it at the command prompt window. Please help.

Thanks ATMGUY. I commented out the import statements in both InterestBearingAccount and AccountDemo and it worked fine. I guess the author of that tutorial was obviously not working with jdk 1.4.
As far as using packages, com.kusek.bank would make a good package name then??
The statement:
package com.kusek.bank; OR a shorter version package kusek.bank;
should be added to all three classes and no import statements would then be necessary, right??
I just remember reading that it should be something unique as a good habit to get into.
I'm trying to learn enough to make a useful GUI program for a special project so I probably should be using packages anyway when I get to that point.
My programming backround is limited to procredural languages Basic, QBasic, Pascal, and Fortran and I find myself still wanting to think in those terms. I have read several web sites and worked through some basic examples but I still have much to learn. I once I can grasp how to write OOP style it would be nice to look at code for a somewhat detailed application (like a store checkout app) and have every line explained as to why it's there. I can see where it makes sense to have your GUI classes predefined (Swing), File I/O, serial port communications, and even things like this InterestBearingAccount example that extends from the Account class utilizing its basic attributes but overriding the constructors for the additional parameters (interest calculation) that are passed. How to take a common problem and go about creating a solution is what I need to see being done to help me.
My telemetry project uses VHF radios with packet radio modems to monitor two diesel engines and turn one off if the other turns off. The modems have built in A/D data gathering and can also output control signals, they just need to be told what to do. I can manually use a Windows Hyperterminal session and type in "connect Engine1" and use commands to determine the A/D inputs "analog". The modems have built in end-to-end acknowledgement so the only think I need is an application than can be setup to run in the Startup folder to handle this. It would use a timer class to "poll" engine1 every 5-10 minutes and if it has stopped (based on the response of the "analog" command) I would "disconnect" from engine1 and "connect" to engine2 and send a "ctrl B off" or something similar. The standard responses from the modem should allow me just to send and recieve STRING data to and from the serial port and parse them as needed. I need at least this much but it shouldn't be too much harder to develop a way to reset the system(reverse of this) when that is required. I could also read a water pressure value at one of the locations and display that on the screen along with the current status of the engines (using values obtained from the "analog" command on the modems).
The hardest part of OOP programming seems to be knowing what classes are already out there and knowing how to find them or apply them. I hope Swing has classes that provide for displaying values on the Windows taskbar (my motherboard monitor freeware displays temperature readings down on the taskbar). I appreciate all the help given here. It's almost like having a private tutor.
randy

How to import a .class in eclipse?

I have a .class file w/ out the source, and im tiring to import that into my project.
So I go to import->File System and check the .class file. It shows up in my project but when I try to instantiate it I get a "can not be instantiated to a type" error.
any thoughts?
this is happening to a lot of people in my course.
thanks!

Hi,
i tried that what you sad, but my eclipse can't import that class.
So: I have eclipse 3.1, and i would like to import a class (without source). I develop at the moment a J2ME project with eclipse.
The class what i want to import is in a package, so i must to import like this: import net.jscience.math.kvm.MathFP;
Can you tell me how in the hell can i this class to import?
(I tried about 6 hours long, and i got some result, but not the really perfect.)
When i make this subdirectory structure (what is in the import line) into my project, then in eclipse work the auto completing, 'till the class name. :-/. But the class is there. Egal i add an external class folder, i got always the same result.
Please help me, because my brain at the moment wants to explode.
Thanks a lot.

PDE-UJ1001, while trying to import java classes.

Hi,
When I try to import java classes into forms using the java
importer, I get an error stating PDE-UJ1001-Failed to create
JVM. I tried installing a patch in Developer 2000(Path 4a). But
still it doesnt work. Could anybody guide me in this?
Thanks,
Karthick.

am getting similar error - my dba has suggested that oracle developer uses the jvm from ie4 but i'm sure that cant be true as i thought the jvm was built in.
could somebody out there clarify this or inform me whats missing..
error
from dev 6i forms builder (6.0.8.11.3) on 8i (8.1.7.2.0) when trying to select option 'import java classes' from program menu returns error 'PDE-UJ1001 Failed to create the JVM.'
regards and thanks in anticipation....
vin ferguson

Cannot import AppModuleImpl class

Hi experts,
I'm developing Jdeveloper 11.1.2.2.0
Suddenly I got this error.
I had created Manage bean and import pakagename.AppModuleImpl and few other Impl classes there.
Suddenly it was prompted error that ,cannot import AppModuleImpl class.
I was wonder about this error because it worked fine before.
Could u pls advise me to solve this problem.
Charith

Hi,
what you try to do is accomplished by creating a dependency between the modle and the viewController project (see view controller project properties). As mentioned in the previous post, crossing boundaries between the model layer and the view controller layer is not good practices. If you need to access an AM method, expose it on the client interface and create a method binding so it can be accessed from and through the ADF binding layer.
Frank

Can i export particular development class.

Dear Expertise,
Is there any way that i can export a particular development class from my dev system and import The same in our sandbox.the software and other particulars of the dev system are
windows 2k3+sp2,Oracle 9.2.0.4.1,SAP 4.7ee
Thanks in advance

I have a similar problem
I changed transport routes in my system from 2 to 3 system landscape.
unfortunately somehow a package/development class was assinged to the wrong transport layer & as a result when users release their request its taken as Local Change Request ie dosent appear in the import queue of the QA system
using SE80 I assinged the package to the correct transport layer & it prompted for a change request . The request goes to the local change request queue when I try to release I get the message Not All Objects In The Request Could Be Locked
Kindly assist

Eclipse plugin error (import java class)

Hello, I am actually developing a complex interface program in JavaFx, the main component is a Swing component with a universe 3D inside (a map of a buildign). So in some javafx classes I have to import java classes and I obtain an import error. I have in the same package a java class and a javafx class with the same import and I only have the error in the javafx one.
Does somebody have the same error? or know how can I fix it?
Thanks and Regards

Thanks for your suggestion, in fact I'm actually developing in Netbeans. My application is really complex I have a java3D universe in a swing component and the javaFx nodes are drawn on it. When I load some nodes and move them over the 3D I obtain a JVM error, I've read that it could be solved in some cases compiling the project in eclipse so I'm trying to do it.
I tried to solve the JVM error hardly, at first it was thrown every time I load a new module in my scene an moved it, I improve the performance of my application and I've decreased the error a lot. In fact, the error only appear if I load the 3D universe and I'm sure that is because of the rendering. I've tried all I can imagine so now I'm trying that kind of stupid thing.
Thanks and Regards

Transport request for development class

Hello folks,
I have a development class (AKA package) containing e.g. one program, one message class and one function group. The function group contains one function module (as well as its associated includes).
I'd like to write a transport request with all the objects of this development class, because I'd like to easily import all the development class' functionality in another system. I mean, in this specific situation I'd include the function module itself as well as the function group.
Unfortunately, when I select the write transport request entry from the development class' context menu (transaction SE80, object navigator), and I specify that I want to transport all the objects in the development class (and not just the development class itself), it doesn't work as I'd like. Just the program, the function group and the message class are written in the request. The function module is not included.
Is there a way to automatically perform sort of a recursive selection, so I can write in a request all the objects associated (at whatever level) with a development class?
Regards, Davide
[2006/09/06-15:30 Message was edited]

Hello Naimesh, hi Max,
I'm not sure about your suggestions.
When I initially write all the development cass' objects in a request, the function group is written in that. Are all the objects of the function group written in that request, as well?
The thing is that when I manually write the function module in that request, the function module is consequently shown in the transport organizer. Therefore I suspect that the function module (i.e. the include <FUN_GRP_NAME>U01) has not been automatically written at the beginning.
So basically my question is:
When I write a function group to a request, is the include <FUN_GRP_NAME>UXX written to that? And is the include <FUN_GRP_NAME>U01 (and all the others) also included?
Cheers, Davide

Import tween class

Hi. I am new at using actionscript, and I am having a bit of
difficulty with Flash MX and importing tween class.
I have typed in this code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
and this is the response I get:
Scene=Scene 1, Layer=actions, Frame=1: Line 1: ';' expected
import mx.transitions.Tween;
Scene=Scene 1, Layer=actions, Frame=1: Line 2: ';' expected
import mx.transitions.easing.*;
Every resource I go to tells me that my code is correct. Does
anyone know what I am doing wrong?

What version of Flash?
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

I am trying to import developed images from LightRoom 5 in o Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this? I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand. Thanks.

Have you tried restoring the Preferences yet?

I am trying to import developed images from LightRoom 5 into Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

I am trying to import developed images from LightRoom 5 into Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another program is using the file. Use the 'properties' command in the Windows Explorer to unlock the file'. This has not happened before. How do I change this?

Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium

Import development class

Similar Messages

Maybe you are looking for