Importing HDV material error message

This is my workflow. I have shot some footage with my Sony z1 in 1080/50i (I work on the PAL format). I want to down convert this with my camera and edit in FCP 5.0.4. I am using a Power Mac g5 quad. How should I import this into fcp? What should my sequence presents be if I want to down convert from HDV (in camera) to SD? Right now, I am using the easy set up 1080i50. When I go to log and capture, I can't import any footage! Its says VTR ok and I can play the footage with my camera connected via firewire but when I hit capture now I get an error message saying that "capture now had to abort because no data was being sent." Please help

FCP 4.5 does NOT support HDV as HDV was released quite a while after 4.5. You'll need FCP 5.0 or higher to work with HDV. DVCPro HD is not the same as HDV at all.
-DH

Similar Messages

Can't import photos into new LR5 installation, no import option, just error message saying "an error occurred while attempting to change modules"

This is a new MacBook with a new CC LR5 installation. There is however no menu choice allowing me to import photos. Np right or left panels at all. When the program opens I get an error message saying there was an error changing modules.

I Nearly bought from Amazon too but I found a thread from Adobe stating that the only recognized outlet for lightoom is themselves and other outlets serial numbers will not be guaranteed.
THat at was sufficient for me to buy direct from Adobe, hope you get it sorted.

Automator Action "Import Audio Files" error message

I use this automator action daily when it is activated via an alarm time in iCal. It is the 3rd workflow run in a series of 7 worlflows to create audio files while I'm at work (I record XM programming for use later on my iPod). Since I upgraded to OSX Lion yesterday, I'm getting a new error message I've never seen and I can't find any info on it. Can anyone help? The error message in a popup dialogue box is:
The action “Import Audio Files” encountered an error.
Check the actionʼs properties and try running the workflow again.
Under the Log for the workflow I get this message:
The operation couldn't be completed. (OSStatus error -1712.) (-1712)
The imported audio file does actually get inputted into iTunes and converted properly via iTunes, but the error creates two problems. One is the source file isn't deleted after the action runs (which is a checkbox option in that particular action). This isn't a big deal, because I can create another workflow seperately to delete the file, so I'm not as concerned with that. The major problem is that the error dialoge box displays and the sebsequent workflows that are scheduled to run right after this one can't run becasue Automator is occupied with the error message.
I'm looking for any advice I can find, I've been using this series of workflows for a long time without issue, but seems like everytime there is a new OS I have to go through the geriatrics of figuring out what slight changes apple made to the Automator actions.
Thanks for reading,
Chris

Hi,
I just solved the problem pretty easily: earlier, on Snow Leopard, automator had to be set to work in 32bit instead of 64bit otherwise there has been a lot of error messages.
I tried to do the same with iTunes on Lion and, oh miracle, it works:
close iTunes then go to Applications -> right click on iTunes -> read informations -> check the box to run the app in 32bits and restart iTunes and .... that's it.
I work in a local radio in Belgium and I rely on automator on an everyday basis to download then add prerecorded broadcasts to iTunes to be aired with Lion server and I was stuck since a few weeks because of that problem. Now I can finally work again :-)
English is not my native language so please forgive me for my mistakes ... :-)
Apple RULES (but you already know that )

While importing a request error message' Check-sum error in data file'

Hi Friends
I have a problem.
We are trying to inport a request after putting the files in cofile and data file folders( 4.6C System).While doing so an error message is seen in the log " Check-sum error in data file after XXXX bytes".
Can some one help me with this?
Thanks
Regards
Ankur

Hi Ankur,
It is sure your file is corrupted or not present.
Check in cofiles and data directory under /usr/sap/trans your transport request number.
Best Wishes.
Kumar

Importing HDV Material in Final Cut Pro 4.5

I'm using Final Cut Pro HD (4.5), quite an old version,
and I want to import HDV footage, shot with a "SONY HDR-HC7E" camera.
Is it possible?
Are there any settings to use?
In the "easy settings" section, I see there is DVCPRO HD, but I guess it's not the same thing.... or is it?
I'm not an expert.
Thank you for your attention

FCP 4.5 does NOT support HDV as HDV was released quite a while after 4.5. You'll need FCP 5.0 or higher to work with HDV. DVCPro HD is not the same as HDV at all.
-DH

First track does not import BUT no error messages

This problem only appears to be happening when I import songs from cds burned by friends.
iTunes appears to be importing Track One along with all the following tracks but when I look up the album in my Library, Track One is missing.
It does this about 90% of the time and it never indicates there's been an error.
In cases where there is just one track, it goes through all the appearances of importing it normally and the track never appears in my Library.
What's up with that?

Addendum to all about this question - I am trying to import my original CDs - hangs and does nothing at first track. Trashed the .plist, no help. Reinstalled fresh copy of iTunes - helped - FOR ONE DISK. After that, same problem.

Import of Prospects Error Message "Source File Not Found"

I have just rebuilt our demo webtools CRM server and am having an issue importing Prospects.
I have tried the Excel option and the CSV Option, but get the same error each time saying "Source Not Found" and a back url (which doesnt work).
I have completed the same functional process and am using the same file to Import the Prospects via (Prospecting > Import, choose Excel, select the file, then click the Upload File & Continue icon) on my old server and this new one. I have also done the same using the SAP Vertical Demo's site and it works fine there so it must be some type of permissions issue.
I am logged in as Administrator and the file to upload is on C:, have also attempted the same with the file in a share with 'everyone' having full access but no change.
Thanks in advance for your assistance with this.
Regards,
Brodie.

Hello Brodie,
It could be one of two issues.
1) As you have guessed, it could be a permissions issue. This permissions issue comes from Webtools not having permissions to temporarily store the file while extracting it to the database. Take a look at this thread: [Re: New theme for download - WebCRM theme!] and apply those permissions to the whole assets folder (prospects get uploaded to assets/temp/)
2) Is this an excel file or an CSV file? If it is an excel file, make sure the "Sheet" name matches what is in the box (e.g. Sheet1) if this doesn't match it could cause similar problems.
James

QT would not import MPEG movie error message:Could not parse it: 2048 help

Dual-Core Intel Xeon Mac OS X (10.4.7)

Sounds like your file is MPEG-2 and you'll need some extra software to open it using QuickTime Player:
http://www.apple.com/quicktime/mpeg2/
It only allows playback and Pro (or the other "i" apps) can't export or convert the audio portion of these "muxed" files.
Yep. More software:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
If you just wish to view the file try VLC:
http://www.videolan.org/vlc/

HI i have tried so many times to import images, both pictures and video from my hard drive to elements 131, and it keeps coming up with the error message " .....has stopped working we are looking for a solution to this problem etc " please help!

After taking days to upload elements 13 I am now having trouble even trying to import my images and videos into the program for editing. Each time I IMPORT files an error message comes up that says " ....has stopped working, we are looking for a solution to the problem and will notify you if a solution is found" I have not been able to edit ANYTHING or even drag files/images to the time line.... is it me? is my computer too slow? surely if it was, then Adobe elements 13 would not have installed in the first place? please someone help me sort this out as I have a deadline to make for a docco! thanks in advance Lyddy

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•You MUST use an account with Administrator Privileges to run Premiere Elements
•(Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors)
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.1 update)
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.9.4"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
•How many and what speed are your hard drive(s)... ie 5400rpm or 7200rpm or?
And some other questions...
•What are you editing, and does your video have an orange line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool

Error message "file unreadable" when importing from camera

When I plug in my digital camera to iPhoto 6, certain pictures do not import and get error message listing the files "file unreadable or wrong format." If I turn camera off and then back on, it gives the message again but with DIFFERENT files.
This happens recently on my iMac (never happened before). The same camera with same images plugged into my MacBook gives no problems. Both running 10.5.4.

Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

No sound after HDV material import

Hi,
I am not knew at iMovie, but am new at iMovie HD.
After importing HDV material from a Canon HV30 camera, and saving it, I find that the Audio is not heard on playback. I have to close the application and re-open it ... and the sound is heard.
Has anyone of you encountered that sort of problem ? As per specifications, the audio is recorded in Mpeg1, 16bit, 48khz. Is that the problem ?
Thanks for any feedback.
jc
PS I use a MBP 15", with all latest software updates.

Hello Ira,
your problem is a little different: you tried to import an MPEG clip into iMovie but iM doesn't work with the muxed audio stream.
Have a look at Dan Slagle's Unofficial iMovie FAQ:
1. Can't hear audio in iMovie when I import an MPEG clip
http://www.danslagle.com/mac/iMovie/tips_tricks/6030.shtml
2. Mpeg clips from digital cameras
http://danslagle.com/mac/iMovie/tips_tricks/6018.shtml
and also Matti Haveri's website: How can I edit MPEG or convert DVD or MPEG to DV
http://www.sjoki.uta.fi/%7Eshmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
Tools:
MPEG StreamClip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
Apple MPEG2 PlayBack:
http://www.apple.com/quicktime/mpeg2/
hope this helps
mish

Do we see an Error Message at the Spreadsheet Level?

My Interface is a Table - PA_TRANSACTION_INTERFACE_ALL
I am using Oracle Standard Importer to pick data from PA_TRANSACTION_INTERFACE_ALL and load to PA base tables. I have defined Error setups as below. My expectation is, if there is any validation failure during the Importer process, the Error Message will be Displayed to the User at the Spreadsheet level itself (Experts, request to correct my understanding here)
Error Row Definition -
SELECT * FROM PA_TRANSACTION_INTERFACE_ALL WHERE TRANSACTION_STATUS_CODE = 'R' AND BATCH_NAME = $param$.BATCH_NAME
The value for the Batch Name is got from Source - IMPORT and Value - PA_TRANSACTION_INTERFACE_ALL.BATCH_NAME
Error Message Setup
SELECT MEANING FROM FND_LOOKUP_VALUES WHERE LOOKUP_CODE = $param$.TRANSACTION_REJECTION_CODE
The value for the Transaction Rejection code is got from the Source - INTERFACE and Value - PA_TRANSACTION_INTERFACE_ALL.TRANSACTION_REJECTION_CODE
My setups seems to be correct in all respects. Now, i perform the testing as follows -
I uploaded a data which would fail validations during Import. My expectation is - The Error Message (specific to the validation) should be displayed to the User. But it does not happen. Instead it shows the standard message (like no of rows uploaded successfully)
Is there some configuration missing. Some valuable input required. we have already applied patch Patch 9790225: Oracle Web Applications Desktop Integrator 12.1.3 Release Update Patchset 1
Regards
Pradeep

It looks like your data is corrupted. Take a look to this articles and try to reset the information in your account: [[Replace your Sync information]]

Can't Import Catalog - Unknown Error

Is this still a known bug without a solution?
I have LR3 on a MacBook Pro Snow Leopard and on a PC Desktiop Win XP Pro SP3. I exported a catalog from the laptop to an external hard drive and then attempted to import it to the desktop and kept getting the dreaded Can't Import Catalog - Unknown Error message.
I don't have an issue with LR Beta because i didn't use it; I just upgraded v2.6 installations on both machines to LR3.
I like LR3 but I've got to be able to get the image files and the LR work I've done on them from my laptop to my desktop and an Unknown Error is not what I need. Am I going to have to wait for the first dot release to be able to do this?
--Bob

Well, I just got off the phone with Adobe Technical Support and I am extremely frustrated
Support: Since you are working cross-platform (from a Mac laptop via an external hard drive and then to a Win XP desktop) we can only say that sometimes it will work and sometimes it will not.
Me: Huh? It worked perfectly in LR 2.6.
Support: I am sorry. That is all I can tell you.
Me: That really ruins my month. I've got thousands of edited images on my laptop from a 3 week trip to SE Asia and now I can't move the catalog to my desktop? Give me a break!!
Support: You can copy the image files to your desktop.
Me: Without the accompanying adjustments?
Support: Yes. Sorry.
Me: Me too.
Anyone have a better idea? I've filed a bug report.....
--Bob

Error message on transferring playlist

Per instructions from a bunch of people, I created a separate user account so I could open another iTunes library to handle my own songs, since my husband was deleting all my stuff and my iPod was losing stuff I'd just added every time he did that. Don't seem to be able to import my playlist from his to my library. I go to "export playlist" and put in C/drive and have tried putting it as .txt and .xml, neither of which is transferring when I click on my own library and try to import playlist. Error message says something like "some of the files could not be imported because they could not be found." However, none of the songs are getting on my new library.

We are now using a different program. Adobe didn't like the file. It works in other program. Thank you for your help.
No, not protected.

How do I set up my Sony HDR-FX1000 to import footage to Final Cut Pro 7, I get an error message.

how do I set up my Sony HDR-FX1000 to import footage to Final Cut Pro 7, I get an error message "attempt to capture video without a video device selected. Please select a video device in your capture presets and try again."

Hi,
1. Make sure you have the camera connected via Firewire (i link)
2. The Camera is turned to "play" and, if you are capturing HDV, in the camera menu, it is set to i link "OFF"
DM

Importing HDV material error message

Similar Messages

Maybe you are looking for