Importing login server objects

1. Can we import login server objects into a login server instance that performs
authentication against a LDAP repository ? If so how ? Doesn't the
ssoimp.csh script import objects only into the login server schema ? We are using 3.0.6.6.5 version of the portal.
2. How do we export partner application and external application
configuration information since this is not a part of the export of the
login server schema ?

Could not post response in the Oracle9i AS Portal Security and Login Server form.
Login Server export-import will only migrate the user information found in sso repository. LDAP repository will need to be migrated before the user can authenticate. Also note that during export only the user information is extracted - the fact that these users are authenticated against LDAP is not in the extracted information. During import, the login server import will import the users and create the default passwords for them. However, the configuration of the login server on the target side will decide if these local authenication is used or LDAP is used - if the target is also configured to use LDAP there should be no problem. Also application information is not migrated.
Short answer:
1. Yes. You need to migrate ldap information manually (or perhaps the two share the same ldap server?) then do login server export-import.
2. partner application and external applications are not currenly supported in export-impor - they have to be recreated manually (and reassociated appropriately).

Similar Messages

Export/import login server and user grup security

Hi,
I followed the instructions to export Login server, user group
security using the ssoexp.csh, secexp.csh. Then I imported the
login server, and user group security using the ssoimp.csh,
secimp.csh .
I then logged into Portal and check the users, all the users are
imported properly. However, I didn't see any group that are
supposed to be imported. Do I missing anything?
The syntax to run the secimp is as follows:
secimp.csh -s portal30 -p portal30 -o portal30 -m reuse -d
sec.dmp -c target_database
The import finished w/o error. How can I see the groups in the
new portal instance that I tried to import objects in?
I noticed that the wwsec_group$ in the source area is over 3000,
and in the target the count is only 10, which is the number of
group I have before the import. But during the export, I don't
see the wwsec_group$ table being exported, is that the problem?
P.S. versions are: 9iAS 1.0.2, portal version 3.0.9.8 on solaris.
Thanks;
Kelly.

This question is best suited to the Oracle9iAS SSO and Portal Security forum.
Thanks

Could not log on to SAP R/3 from XI system to import IDOC/RFC objects

Could not log on to SAP R/3 systems from XI system to import IDOC/RFC objects:
As soon I enter the SAP IP address, system number, user id and passowrd , getting following error.
Details
java.lang.ArrayIndexOutOfBoundsException
STACKTRACE:
com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: java.lang.ArrayIndexOutOfBoundsException
 at com.sap.aii.ibrep.sbeans.upload.UploadServiceBean.openSAPSource(UploadServiceBean.java:79)
 at com.sap.aii.ibrep.sbeans.upload.UploadServiceRemoteObjectImpl0.openSAPSource(UploadServiceRemoteObjectImpl0.java:320)
 at com.sap.aii.ibrep.sbeans.upload.UploadServiceRemoteObjectImpl0p4_Skel.dispatch(UploadServiceRemoteObjectImpl0p4_Skel.java:196)
 at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:291)
 at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
 at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:119)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
java.lang.ArrayIndexOutOfBoundsException
Can anyone help me to solve this issue.

Venkat,
You can download them from http://service.sap.com/download
For 4.6c follow
Download
 Support Packages and Patches
 Entry by Application Group
Select Support Packages and Patches -> SAP Application Components -> SAP R/3 -> SAP R/3 4.6C -> Entry by Component
Mainly You need SAP ABA 4.6C and SAP BASIS 4.6C and SAP APPL 4.6C
The most latest one is Support Package 50. What you can do is after applying half of them you can try to logon from XI system for import of RFC/IDoc.
regards
SKM

Import of RFC objects from R/3 into XI repository

Hi All
I am trying to import RFC (Function module) from R/3 ECC6.0 into XI repository using Import of SAP objects icon. And when the username and password of my R/3 is given, it shows an error invalid username and password. But my R/3 login is working with the same uname and password. I have done partner profile, port and RFC destination settings in both R/3 and XI system. But everytime I am getting the same error in XI when importing SAP objects. Any ideas is appreciated.
Thanks
Anand

If XI is installed on Windows you can find this file in
%WINDIR%\system32\drivers\etc\services file,
In Unix this is in /etc/ with the name services
The entry you should see for example sapgw<xx> 33<xx>/tcp
where xx is sap gateway no.

Unable to Import the ID objects in PI 7.0

Hi,
I have installed a new PI 7.0 server which is on local SLD. I also have old PI 7.0 in which all the scenarios are configured.
I am trying to import the scenarios from the old PI 7.0 to new PI 7.0.
Both the servers are on local SLD and on different transport domains.
I tried simple file transfer. I was successful.
But when i am trying to import the ID objects which have got reference to SLD i am getting the error as below.
Import failed because of business system transfer of object Service | ECC_XI: Obligatory transport target for business system ECC_XI not found in System Landscape Directory
Import failed because of business system transfer of
object Service | ECC_XI: Obligatory transport target
for business system ECC_XI not found in System Landscape
Directory (BS_MAPPING_FAILED_OBJ)
Obligatory transport target for business system ECC_XI
not found in System Landscape Directory (BS_TARGET_NOT_FOUND)
Business system P70 is not assigned to a business system
group with the ID (XISystemGroup) (BS_GROUP_LOAD_BY_BS_PROC_EX)
I have also imported the SLD contents related to the scenario.
P70 is the SID of my new PI 7.0 and BWS is the SID of my old PI 7.0.
ECC_XI is the business system which is referenced in the scenario.
Please suggest.
Thanks
Raghu.

Dear all, I've the same error from the first post. If I try to import my XI 3.0 content to PI 7.3 the Integration Builder means:
Receiver Agreement | XY | SYSTEM | ABC : Obligatory transport target for business system SystemP not found in System Landscape Directory
Why this is oblicatory? I've two PI with local SLD in bidirectional sync. There also all business systemes have been created. There are last but not least two groups DEV and PROD. The development systems and the DEV PI is asigned to group DEV and the productional systems and the PROD PI is assigned to group PROD.
Then I've assigned the the PROD Group with transport target to the DEV System and for the business systems I can see the correct mapping. In the DEV systems the transport group and system as targed is assigned. And in the PROD systems I can see the DEV Systems as Source System.
I dont need target systems for PROD systems and I don't have target systems; but why I need now a target system for a productional system by PI import to the IB?

I am doing a login server...

i am doing a school assignment and it requires me to implement an application which is very much similar to icq...
the server connects to a ms access database
this is the main interface
http://hk.geocities.com/iamsupersuperman/DLS.JPG
this is the login server
http://hk.geocities.com/iamsupersuperman/ls.JPG
this is the access database
http://hk.geocities.com/iamsupersuperman/access.JPG
each client must be able to see other clients in the online list ( of course when they are online)
the access database holds the status and ip address of the clients
but how can i make sure every client has a most up-to-date online list??
am i doing it in an appropriate approach?
please give me some ideas on how i can finish this assignment~~~thanks!!!!!

i got a problem..
should i use a vector to hold the login id and ip address of all clients who are online??
and then send these information to every client for every few seconds so that they can have a most up-to-date online list??
thanks!!
the login server:
import java.net.*;
import java.io.*;
import java.util.*;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.sql.*;
import java.util.Properties;
import java.io.InputStream;
public class Server3in1 extends Thread{
    protected Socket s=null;
    static LoginServer ls;
    public static void main(String args[]) {
        ls=new LoginServer();
        ls.setVisible(true);
        ls.loginMon.append("Login Server Started");
        ls.loginMon.append("\n" + "Waiting for connection...");
        try {
            ServerSocket listen=new ServerSocket(1234);
            while(true) {
                Server3in1 aRequest=new Server3in1(listen.accept());
        catch(IOException ioe) {
    public Server3in1(Socket s) {
        this.s=s;
        start();
    public void run() {
        try {
            BufferedReader is=new BufferedReader(new InputStreamReader(s.getInputStream()));
            String loginid=is.readLine();
            //beginning JDBC
            Connection myConn;
            Statement myStmt;
            ResultSet myRs=null;
            Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
            myConn=DriverManager.getConnection("jdbc:odbc:Assignment1");
            myStmt=myConn.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_UPDATABLE);
            myRs=myStmt.executeQuery("select * from login where loginid='" + loginid + "';" );
            if(myRs.next()){
                ls.loginMon.append("\n" + "User " +loginid + " from " + s.getInetAddress() +" connected.");
            else
            { ls.loginMon.append("\n" + "User " + loginid + " from " + s.getInetAddress() +" tried to connect but his id was invalid.");
            //end of JDBC
        catch (Exception e) {
            e.printStackTrace();}
class LoginServer extends JFrame implements ActionListener {
    JScrollPane JP;
    JTextArea loginMon;
    JButton shutdown;
    LoginServer() {
        setTitle("Login Server");
        setSize(450,500);
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        setLocation(280,210);
        Container container=getContentPane();
        container.setLayout(new BorderLayout());
        container.add(new JLabel("Login Server Monitor"),BorderLayout.NORTH);
        loginMon=new JTextArea(3,5);
        // loginMon.setEditable(false);
        JP=new JScrollPane(loginMon);
        container.add(JP,BorderLayout.CENTER);
        shutdown=new JButton("Shut Down");
        container.add(shutdown,BorderLayout.SOUTH);
        shutdown.addActionListener(this);
    public void actionPerformed(ActionEvent e) {
        if(e.getSource()==shutdown) {
}

Unable to map/get Attributes with import of LDIF Object Class

Hi All,
We are trying to take import of Customized Object Class and Attributes into OID through LDIF.
LDIF import command is:
./ldapadd -p 3060 -h myhost -D "cn=orcladmin" -w Ac123456 -f xyzObjClass.ldif
LDIF contents are:
dn: cn=subSchemaSubentry
changetype: modify
add: objectclasses
objectclasses: ( 1.3.6.1.4.1.1436.2.46 NAME 'ProviderObjClass' SUP ( organizationalPerson $ person $ top ) STRUCTURAL MAY ( attr1 $ attr2 ) )
Note: attr1 and attr2 are already imported into OID.
Result: We are able to create Object Class and also able to inherit Super Class. But we are not able to map the attributes to our Object Class.
Can anybody help me in importing ?
Thanks & Regards,
Newbie

Again, I don't work with Java and you should ask Java-related question in Flex (or Java) forum.
Java or not - you need to package your server side language specific object into something that AS understands (text, XML, AMF object) and load this data into AS via, perhaps, URLLoader. Or you can open socket. Then you parse this data with AS3 code in SWF.

Dynamic group of DHCP 2012 windows server objects

Dear All,
We need to create a SCOM dynamic group to have Windows server object of DHCP 2012 installed servers.
Went through
this post and tried to edit the mp xml file by inserting below mentioned lines. But, i couldn't import the MP back.
 <Contains>
 <MonitoringClass>$MPElement[Name="DHCP!Microsoft.Windows.DHCPServer.2012.Server"]$</MonitoringClass>
 </Contains>
Could you help me with this?
Thanks
Santhosh

I suggest you use mpverify to verify the mp first.
Juke Chou
TechNet Community Support

Regular RMI server object with WebLogic JNDI

Is that possible to register a regular RMI object with WebLogic JNDI
tree? I was building a simple program (using javac and rmic only) based
on the java.rmi.* (without changing the import statements to
weblogic.rmi.*) and using the weblogic.jndi to register the server
object. Below is some piece of code,
Context ctx = null;
Hashtable ht = new Hashtable();
ht.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
ht.put(Context.PROVIDER_URL, "t3://172.20.20.20:7001");
ctx = new InitialContext(ht);
ctx.bind("HelloServer", obj);
The code failed for the following reason,
javax.naming.NamingException. Root exception is
java.rmi.MarshalException: failed to marshal public abstract void
weblogic.jndi.internal.NamingNode.bind(java.lang.String,java.lang.Object,java.util.Hashtable)
throws javax.naming.NamingException,java.rmi.RemoteException; nested
exception is:
java.rmi.server.ExportException: A description for
examples.rmi.hello.HelloImpl was found but it could not be read due to:
[Failed to find examples.rmi.hello.HelloImpl_WLStub or
examples.rmi.hello.Hello_WLStub for class examples.rmi.hello.HelloImpl]
java.rmi.StubNotFoundException: Failed to find
examples.rmi.hello.HelloImpl_WLStub or examples.rmi.hello.Hello_WLStub
for class examples.rmi.hello.HelloImpl
at
weblogic.rmi.internal.BasicDescriptor.<init>(BasicDescriptor.java:101)
at
weblogic.rmi.internal.BasicRuntimeDescriptor.<init>(BasicRuntimeDescriptor.java:50)
at
weblogic.rmi.internal.DescriptorManager.resolveClass(DescriptorManager.java:55)
at
weblogic.rmi.internal.DescriptorManager.getDescriptor(DescriptorManager.java:39)
at
weblogic.rmi.internal.DescriptorManager.getDescriptor(DescriptorManager.java:30)
at
weblogic.rmi.internal.OIDManager.getRequestDispatcher(OIDManager.java:281)
at
weblogic.rmi.internal.OIDManager.getReplacement(OIDManager.java:270)
at
weblogic.rmi.internal.OIDManager.replaceObject(OIDManager.java:98)
at
weblogic.common.internal.ChunkedObjectOutputStream.replaceObject(ChunkedObjectOutputStream.java:55)
at
weblogic.common.internal.ChunkedObjectOutputStream$NestedObjectOutputStream.replaceObject(ChunkedObjectOutputStream.java:239)
Any idea?
- SteveC

"Pyung Yoon" <[email protected]> writes:
MediatorInterface mediator = (MediatorInterface) java.rmi.Naming.lookup("rmi://localhost:7001/TestMediator);This implies JRMP which the server does not support. You need to use t3 or iiop.
andy

Partner Application and Login Server

I have created a partner application using the samples provided in the ssosdk. In the SSOSignServlet I am checking a table to determine if the user returned from the login server has access to the partner application. If the user has access, I set the cookie and the user is redirected to the application. If the user does not have access, am not sure how to handle it. I can use response.sendRedirect(response.encodeUrl(m_cancelUrl), yet would rather display a message indicating that dont have access and are being redirected. If I try to output a message in the SSOSignOnServlet, I get into a loop. ANy ideas?

I finally got it working by VERY CAREFULLY reading the instructions in the install.txt document in the SSO SDK package. You have to set up the partner application with a new schema in the login server database, and run the regapp.sql script AFTER editing it to insert data from the Login Server Partner Application admin screen. After you register the partner app in Portal, it gives you some info (site token, listener token, encryption key, etc). You have to MANUALLY copy these and paste them into the regapp.sql script, then run the script in the partner app schema. Make sure you don't confuse capital I with numeral 1 (like I did, since Oracle so nicely uses a non-serif font where you can not tell the difference).
Also make sure you copy the exact values for these parameters into your code when you use the SSOEnabler class. The listener token was very confusing since different documents appear to disagree on whether it should include the partner app name or not. It does require the partner app name:
app-name:hostname:port
hostname and port are for the web server that is handling http requests for the login server (usually your main portal web server).
John H.

Create a site collection with dedicated content db with the help of server object model

Hi,
I have a requirement to implement a create a new site collection with dedicated content db. i have got 2 PowerShell scripts which does the same. first i will create a content db and then create the sitecollection with contentdb
parameter with the created contentdb name.
Now the site collection created must contain few doc libs and few splists with look up columns, people picker data type, multiline of text, single line of text,choice field. hence i am thinking the below approach:
1) create a web template and include sp doclibs, splists , site columns in this.
2) i am thinking of a ui design to create the below:
These are called "projects" which is actually the site collection with the doclibs, splists and must be created by sharepoint admin on click of a link in my landing page.end users access these "projects" aka
"site collections" and uploads the documents into these projects and collaborate.
so my question is : On click of a button can I create a site collection with a dedicated content db based on the web template created with the hel of server object model?
The other approach is on click of this button call the power shell script which accepts the sitecollection name and contentdb name as parameter. is this possible in server obj.model ?
passing a paramter from code behind- visual web part ui to power shell ?
and it should create the site collec based on the web template and create the content db.
my doubt #3 : will it not throw error "request timed out" when creating the site collec and contentdb from ui ?

Try below:
http://sharepoint.stackexchange.com/questions/21606/programmatically-create-a-site-collection-in-an-existing-mounted-content-databa
PowerShell is just a wrapper for the object model. You shouldn't need to reference PowerShell in your feature, just create the new site collection with C# inside your feature. There's a blog post here that illustrates some code that may get you started.
http://blog.mastykarz.nl/programmatically-creating-sites-site-collections-custom-web-template/
http://blogs.msdn.com/b/vesku/archive/2014/06/09/provisioning-site-collections-using-sp-app-model-in-on-premises-with-just-csom.aspx
# Enable the remote site collection creation for on-prem in web application level
# If this is not done, unknon object exception is raised by the CSOM code
$WebApplicationUrl = http://dev.contoso.com
$snapin = Get-PSSnapin | Where-Object {$_.Name -eq 'Microsoft.SharePoint.Powershell'}
if ($snapin -eq $null)
Write-Host "Loading SharePoint Powershell Snapin"
Add-PSSnapin "Microsoft.SharePoint.Powershell"
$webapp=Get-SPWebApplication $WebApplicationUrl
$newProxyLibrary = New-Object "Microsoft.SharePoint.Administration.SPClientCallableProxyLibrary"
$newProxyLibrary.AssemblyName = "Microsoft.Online.SharePoint.Dedicated.TenantAdmin.ServerStub, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
$newProxyLibrary.SupportAppAuthentication = $true
$webapp.ClientCallableSettings.ProxyLibraries.Add($newProxyLibrary)
$webapp.Update()
Write-Host "Successfully added TenantAdmin ServerStub to ClientCallableProxyLibrary."
# Reset the memory of the web application
Write-Host "IISReset..."
Restart-Service W3SVC,WAS -force
Write-Host "IISReset complete."
If this helped you resolve your issue, please mark it Answered

Data Migration - SSIS Transfer SQL Server Objects Task or something else

Can someone please kindly help me with this.
Scenario
I have a requirement to transfer selected tables and views (with a specific schema) between two databases which reside in two different servers. In the interest of clarity I will call my databases DB_A and DB_B respectively. Please note that these databases
are NOT on the same server.
Transfer of these objects (tables & views) happens once a month. 99% of the objects in question will be of the same name and schema between the two databases as the ones migrated from the previous month. However, metadata definitions may change on DB_A
and those changes are supposed to be reflected on DB_B along with the associated data. This therefore means that each time a transfer/migration happens; objects in DB_B are dropped first and completely replaced by objects from DB_A.
Problem
What is the best way to achieve this?
My first attempt has been a go on the Transfer SQL Server Objects Task
in SSIS. The problem that I have is that when using Transfer SQL Server Objects Task
I don’t know how to filter objects in DB_A so that only objects with a specified schema can be migrated.
Transfer SQL Server Objects Task appears to be the best solution to me to accomplish my requirement but I can’t filter the desired objects by schema. Someone suggested using C# but my C# skills are not that eloquent.
May someone kindly help please, or possibly suggest any other way which can be handy to fulfil my requirements.
Many thanks,
Mpumelelo

Hi Prashanth
Thanks for your response. There is one problem though in my case. I’m sorry I forgot to mention this in the original question. When the objects are moved from BD_A to DB_B the schema in DB_B changes. That is, schemas are not the same between the source and
the destination database. How do I handle that with the solution that you have suggested?
Many thanks,
Mpumelelo

Getting 'File not found' error while using server object model code

Hi,
I am using server object model code to pull list data in a console application. My machine has standalone installation of SP 2010. I am getting error 'File Not Found', however the same operation is working fine with client object model code.
Code I am using:
string strURL=http://servername/sites/sitename;
SPSite siteObj=new SPSite (strURL); //getting error here.
I have already checked the below,
1. Framework being used is 3.5.
2. I have proper access to site.
3. Running visual studio as admin.
Any help is much appreciated.
thanks
Tarique
thanks and regards Tarique Aslam

Hello Tarique ,
Couple of pints need to check:
1. User running the console application needs to have at least read permission to the SharePoint databases
2. Set application by changing the "Platform target:" option on the "Build" to "Any CPU"
Also refer this similar thread:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2a419663-c6bc-4f6f-841b-75aeb9dd053d/spsite-file-not-found
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Loadjava error while installing Login Server

Hello,
I am having some difficulty installnig the login server. The log shows an error
in the linstall.cmd where the script is trying to load the SSOHash class.
The error message says that the user does not
have privileges to add a class to a restricted package.
Due to this error, subesquent pkgs are invalid.
Please help

Fixed it by reinstalling JVM as follows:
To install the required Java classes, perform the following commands:
1. Connect as SYS User.
2. Run %ORACLE_HOME/javavm/plsql/jlib/initjvm.sql
3. Run %ORACLE_HOME/rdbms/admin/initplsj.sql
4. Rerun Oracle Portal 3.0 Configuration Assistant
Eveything works now.
<BLOCKQUOTE>quote:<HR>Originally posted by Seni Williams ([email protected]):
I have the same problem. Platform is Windows 2000 Professional, Oracle db EE 8.1.7. Oracle 9iAS 9.0.2.
Tks<HR></BLOCKQUOTE>
null

PowerPivot: data no longer available due to "the server object is not connected."

Hi,
I'm using Excel 2013 for building a PowerPivot model. Currently 2 table are inserted (txt files) which are related by a unique customer ID.
At for me random moments the connections with the files gets lost and no data is shown. Nevertheless, the number of rows and column headers are still visible. If I go the 'existing connections' and choose 'refresh' I got the following errror: "We couldn't
refresh the connection, please go to existing connections and verify the connect to the file or server". If I try to edit the data ('edit connection') I see immediatly a preview of the date. But when I choose save I receive the following error: "unhandeld
exception has occured in a component in your application ... The server object is not connected."
Remarkebly I never had this problem with the same data in Excel 2010. Anyone an idea what could cause this problem and a way to work around this?
Thanks in advance,
Rolf

I have the same error after installed Dec.9 updates, and then other thread suggest me remove them. it worked.
Good luck.

Importing login server objects

Similar Messages

Maybe you are looking for