Importing Process Integration Content

Hi!
I am about to configure SAP PI. The step I executing:
Importing Process Integration Content
Question:
which Process Integration Content do I need when I use SAP NetWeaver 7.0
(PI_Basis_2005_1_700)?
Thank you very much!
regards

Hi!
Thank you!
Unfortunately PI_Basis_2005_1_700 does not solve the problem.
I imported the SAP_Basis component and now I can access to Configuraiton.
Thank you!

Similar Messages

SAP NetWeaver 7.0: Importing Process Integration Content

Hello all,
I have newly installed XI system (NetWeaver 7.0 with PI) with Support Package Stack 14. I wanted to import PI content as describe in note 836200, but after choosing the package - import source in Integration Builder Design - I have the message
Connection to server lost You can log on again once the server is available again Do you want to log on again?
And if I put the password everything seems be ok - message is: Reconnection to server was successful. Repeat the action. But if I repeat the action, problem with lost connection appears again and again.
Also interesting is that Export design objects from Repository is not working - the same error as I wrote for Import, but Export from Directory works well. At the moment we are using file system for transport.
Can you help me where could be the problem?
Best regards,
Slavomir Kysel.

Hello Sreedhar,
Use link
Support Packages and Patches" SAP Content" ESR Content (XI Content)" XI CONTENT SAP_BASIS" XI CONTENT SAP_BASIS 7.00
and
Support Packages and Patches" SAP Content" ESR Content (XI Content)" XI CONTENT SAP_ABA" XI CONTENT SAP_ABA 700
OR use different way:
Support Packages and Patches" SAP NetWeaver" SAP NETWEAVER" SAP NETWEAVER 7.0 (2004S)" Entry by Component" Content PI/XI
Best regards,
Slavomir Kysel.

Export/Import Process in the UI for Variations Content Translation is Generating CMP Files with No XML

We have a SharePoint 2010 Publishing Website that uses variations to deliver contain to multiple languages. We are using a third-party translation company to translate publishing pages. The pages are
exported using the export/import using the UI process described here: "http://blogs.technet.com/b/stefan_gossner/archive/2011/12/02/sharepoint-variations-the-complete-guide-part-16-translation-support.aspx".
Certain sub-sites are extremely content-intensive. They may contain many items in the Pages library as well as lists and other sub-sites.
For some sub-sites (not all), the exported CMP file contains no XML files. There should be a Manifest.XML, Requirements.XML, ExportSettings.XML, etc., but there are none. After renaming the CMP file
to CAB and extracting it, the only files it contains are DAT files.
The only difference I can see between the sub-sites that generate CMP files with no XML files is size. For example, there is one site that is 114 MB that produces a CMP file with no XML files. Small
sites do not have this problem. If size is the problem, then I would think the process would generate an error instead of creating a single CMP file that contains only DAT files. However, I do not know exactly what the Export/Import Process in the UI is doing.
This leads to two questions:
1.
Does anyone know why some CMP files, when renamed to *.CAB and extracted, would not contain the necessary XML files?
2. Second, if exporting using the UI will not work, can I use PowerShell? I have tried the Export-SPWeb, but the Manifest.XML does not contain translatable
content. I have not found any parameters that I can use with Export-SPWeb to cause the exported CMP to be in the same format as the one produced by the Export/Import process in the UI.
As a next step, we could try developing custom code using the Publishing Service, but before doing this, I would like to understand why the Export/Import process in the UI generates a CMP that
contains no XML files.
If no one can answer this question, I would appreciate just some general help on understanding exactly what is happening with the Export/Import Process -- that is, the one that runs when you select
the export or import option in the Site Manager drop down. Understanding what it is actually doing will help us troubleshoot why there are no XML files in certain export CMPs and assist with determining an alternate approach.
Thanks in advance
Kim Ryan, SharePoint Consultant kim.ryan@[no spam]pa-tech.com

I wanted to bump this post to see about getting some more responses to your problem. I'm running into the same problem as well. We're running a SharePoint 2010 site and are looking at adding variations now. The two subsites with the most content take a
while to generate the .cmp file (one to two minutes of the browser loading bar spinning waiting on the file). Both files are generated with a lot of .dat files but no .xml files. I was thinking like you that it must be a size issue. Not sure though. Did you
ever happen to find a solution to this problem?

Handling rejections in the Payable's Supplier Open Interface Import Process

I’m using the suppliers API to mass load the suppliers. I’m loading the tables AP_SUPPLIERS_INT, AP_SUPPLIER_SITES_INT and AP_SUP_SITE_CONTACT_INT by part; first the AP_SUPPLIERS_INT and then the other two tables. Due to various errors I get some rejections on the first table. If I want to correct the data on the interface tables, what should I do (on the rejected records that I want to correct)? (a)Should I correct the data and leave the STATUS and REJECTION_CODE as the API left them and re-run the Open Interface Import process? (b)Should I delete the contents of those fields? (c)Should I delete the entire table?
I tried option (a) but the process seemed to take forever compared to the first time I ran it and I canceled the request.
Thanks in advance.

Hi,
Unhide the Debug (Debug Switch) parameter of the Report, Supplier Open Interface Import and run the program with Debug flag as Yes.
Please post the log to help us understand the issue.
Regards,
Sridhar

Whats the difference between PROCESS INTEGRATION & INTEGARTION PROCESS

hey All
I was just going through one of the tutorials provided in
http://www.help.sap.com , its related to Process Integartion Scenario and i also came across one more tutorial related to Integration Process.
For * Process Integration* it was there like *A Process Integration scenario is a design object of the Enterprise Services Builder, is uniquely identified by a name and a namespace, and is subject to versioning.*
url : http://help.sap.com/saphelp_nwpi71/helpdata/en/ec/21ee117a909f44a8b69794b9ed6221/content.htm
for Integration Process it was +*An integration process is an executable cross-system process for processing messages. In an integration process you define all the process steps to be executed and the parameters relevant for controlling the process.
You apply integration processes when you want to define, control, and monitor complex business processes that extend across enterprise and application boundaries. The design and processing of integration processes is also known as cross-component Business Process Management (cross-component BPM, ccBPM), or service orchestration.
+*
url :
http://help.sap.com/saphelp_nwpi71/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
So my question is , whether both are same or different , as far my view it different , i think integration processes is one of term inside Process integration as told in URL , please guys see to this

Hi Abhishek,
Integration process (IP) refers to BPM. you will find the IP in the ccBPM, Business Process Management.
An integration process is an executable, cross-system process for processing messages.
Process Integration(PI), Now Xi is known as Process Integration PI is a term that is used to in the Integration Broker of the NetWeaver Architecture.
View the below link you will get the related more information.
http://help.sap.com/saphelp_nw04/helpdata/en/2e/bf37423cf7ab04e10000000a1550b0/frameset.htm
hope you got your solution.
Regards
Anil
Edited by: Venkat Anil Gannavarapu on Apr 9, 2008 1:13 PM

Can't create a new record via Import using Integration ID

I have custom object records (+Assets+) that includes data attributes from another custom object (+Acme Products+ - not the same as CRMOD Products object). I would like to create new Asset records that pulls data in from the Acme Products object via the Import process, but I cannot always use the "Acme Products: External Unique ID" field to connect the data because Products don't always get created externally, most are created directly in the user interface. I'd like to use the "Acme Products:Integration ID", but that field doesn't appear when I'm mapping the fields on Step 3. Is there another way to connect the data?
Edited by: user2320847 on May 27, 2011 3:14 PM

You could use web services. Post this question on the CRM On Demand Integration Development Forum.

Upgrading Stellent 7.5 to OCS 10gR3 Import Process failing HELP NEEDED

Hi,
I am upgrading Stellent 7.5 to Oracle COntent Server 10gR3. Here is what I have done.
1. Migrated all the configuration from Stellent to 10gR3
2. Migrated the Folders from Stellent to 10gR3
3. Migrated the content by creating an Archive and then importing the Archive in 10gR3.
I am seeing lot of errors in the log file. Following are the errors I see in the log file.
1.
Could not send mail message from (null) with subject line: Content Release Notification. Could not get I/O for connection to: hpmail.rtp.ppdi.com java.net.ConnectException: Connection timed out
2.
Import error for archive 'ProductionContent' in collection 'prod_idc': Invalid Metadata for 'ID_000025'. Virtual folder does not exist.
3.
Import error for archive 'ProductionContent' in collection 'prod_idc': Content item 'ID_004118' was not successfully checked in. The primary file does not exist.
4.
Import error for archive 'ProductionContent' in collection 'prod_idc': Content item 'ID_004213' was not successfully checked in. IOException (System Error: /u01/app/oracle/prod/ucm/server/archives/productioncontent/09-dec-21_23.29.44_396/4/vault/dmc_unblinded_documents/4227 (No such file or directory)) java.io.FileNotFoundException: /u01/app/oracle/prod/ucm/server/archives/productioncontent/09-dec-21_23.29.44_396/4/vault/dmc_unblinded_documents/4227
5.
Import error for archive 'ProductionContent' in collection 'prod_idc': Content item 'ID_031414' with revision label '2' was not successfully checked in. The release date (11/4/08 9:12 AM) of the new revision is not later than the release date (11/4/08 9:12 AM) of the latest revision in the system.
6.
Import error for archive 'ProductionContent' in collection 'prod_idc': Invalid Metadata for 'ID_033551'. Item with name '07-0040_IC_Olive-View_UCLA_ERI_Cellulitis_2008-08-26.pdf' already exists in folder '/Contribution Folders/2007/07-0040/07-0040Site_Specific_Documents/07-0040Olive_View_UCLA_Medical_Center/07-0040Archive/07-0040Essential_Documents_ARC/07-0040Informed_Consent_ARC/'.
7.
Import error for archive 'ProductionContent' in collection 'prod_idc': Aborting. Too many errors.
QUESTIONS:
Is there a way to keep the import processing running even if the errors are coming. As it looks like when there are too many errors the import process stops in the middle.
How do I find out the total number of folders and the documents. As I want to run the same query on Stellent 7.5 and find out total number of folders and the documents and then run the same query on 10gR3 and compare the results. Just want to fnd out how much content is imported.
How do I run the import process over again as half of the content is imported and my import process failed in the middle when running the process over again what settings do I need to provide to make sure no duplicates get created etc.
Any help is really appreciated.
Thanks

Hi
There are a couple of ways to get around the issues that you are facing such that import process is not interrupted because of these. They are as follows :
1. Use ArchiveReplicationException component . This will keep the import process running and make a log of the failed process which can be used for assessing / gauging the success of the import and what all needs to be redone.
I would suggest this as the option for your case.
2. Put the config variable for arciver exception to 9999 so that the archive process stops only after hitting the limit of 9999 errors.
I would suggest to go for step 1 as that would be a much more foolproof and methodical way of knowing what all items have failed during import.
Thanks
Srinath

Can a script be written to improve the import process?

Hello everyone -
One of our managers would like to create topics by importing text from Word. That is simple enough, but she would like to add a 'mapping' function to the import process that would create the topics in the appropriate folder.
For example, the RH table of contents is structured by category (4), state(50) and line of business(15). The Word file is structured as a table, and in that table are columns for category, state and line of business, along with additional text (such as description, etc).
During the import process, she would like to map the Word file by category, state and line of business. Using that mapping, import each line of the table and create a topic in the appropriate category, state and line of business.
Is it possible to write a script to accomplish this task? Or, is this just too complicated an operation?

Photoshop Scripting-wise this seems fairly "easy".
But I would recommend creating a template file (that already combines background image, png overlay and the Type Layers).
Maybe data driven graphics would also be an option …
Photoshop Help | Creating data-driven graphics

Configuring Process Integration Scenarios for Advanced Adapter Engine

Hello @all,
i've an asynchronous SOAP scenario and would like to configure an integrated configuration for Advanced Adapter Engine using a process integration scenario. In the documentation (Link below) it is described, that you can select local communication using AAE in the model configurator, but I couldn't find any hint. Any idea?
Documentation:
http://help.sap.com/saphelp_nw73/helpdata/en/48/ce987b18d3424be10000000a421937/content.htm
Thanks and kind regards
Andreas

Hi,
Use thse links:
Advanced Adapter Engine Configuration in PI 7.1
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700058f0-b1a1-2a10-39a8-ab2627b87cfa?QuickLink=index&overridelayout=true&47047071760975
Sreeni.

Upgrade SAP 7.1 Process Integration

Hello to All.
I have a question about Process Integration .Recently I upgrade to SAP PI 7.1 so I need test all components
When I clicking in a BPM. I cannot edit because show a message :"Objects in commponent cannot be changed because the original it's no defined"
Can you help me.?
Thanks and regards.

Hi,
If you import the Software Component you cannot modify be default.Enable the Objects are Modifiable option for SWC
Use these two attributes to define the properties for all objects of the software component version:
a. Objects Are Original Objects:
The objects of the software component version are the original objects in the repository belonging to the Integration Builder, and should only be modified in this repository. There can only be one original object, in other words, you must not set this attribute for multiple software component versions of other repositories simultaneously.
b. Objects Are Modifiable:
When set, this attribute enables you to change objects in the software component version. Use this attribute to lock all objects against changes, if required.
regards
Ganga
Edited by: gangaprasad chintala on Dec 29, 2008 5:48 PM

System Copy SAP NetWeaver Process Integration 7.1 documentation incorrect

I am trying to a Homogeneous System Copy on PI 7.1 SP07. I don't want to do a
Copying the Primary Application Server Instance Only
Because (as the documentation says) "As of SAP NetWeaver based on kernel 7.1, you can copy a primary application server instance only. With this procedure you can move a primary application server instance to a different host within your system."
I don't want to move my system to another system. I just want to do a Database refresh. That option is not available when I run SAPINST.
I see the option for database refresh in the manual, but it's not a sapinst selection
6.3Copying the Database Only u2013 Refresh
With this procedure you can refresh the content of an existing database without having to copy the primary application server instance and to reinstall additional applications servers.
I'm using the latest SAPINST and I have the correct DVD from Service Marketplace.
This database refresh option appears in both the "distributed system" selection under system copy --> target --> distribute system.
"SAP NetWeaver Process Integration -> Software Life-Cycle Options --> System Copy --> Target System --> Distributed System --> Based on AS ABAP and AS Java --> Database Refresh or Move".
Is that the correct choice? Why is the documentation wrong?
"SAP NetWeaver Process Integration 7.1 including Enhancement Package" and "System Copy for SAP NetWeaver Process Integration 7.1". So it must be correct (I think).
I do see the database refresh option under the "

Thanks for the reply. So I would do this:
"Copying the Primary Application Server Instance Only
Because (as the documentation says) "As of SAP NetWeaver based on kernel 7.1, you can copy a primary application server instance only. With this procedure you can move a primary application server instance to a different host within your system."
and then do the "database refresh" option under "distributed systems"?
Is that correct?

SMSY define ERP system with Process Integration instance

Hello,
We have connected new installed ERP system (ERP 6.0 EHP3) to central SLD (SAP SM EHP1).
But we can see the strange situation.
SMSY define automatically this ERP system as the system with Process Integration instance but not ECC Server instance.
We have not installed Usage Type PI in the ERP system.
Also we have old ERP system in SLD. It is visible as SAP ERP system with ECC Server instance.
What is the strange behaviour of SMSY? What should we do and how can we correct this definition in SMSY?

Hi,
Check what you have selected as "Main Instance" in SMSY under tab Software Components.
Follow this link.
http://help.sap.com/saphelp_smehp1/helpdata/en/84/24f94a1ae44a14b83529f5890a6ff5/content.htm
Hope this helps.
Feel free to revert back.
-=-Ragu

Import existing web content.

Hello,
We have an existing internal web site that I would like to bring into Portal Page Groups. The content is mostly static HTML with relatively linked images and docs. Is there a script or procedure for doing this?
Thanks for any assistance.

To import existing Web content, OracleAS Portal offers a number of content integration technologies (ZIP files, WebDAV, Omniportlet, and APIs) which may help you migrate your existing Portal content/static content to OracleAS Portal:
1) ZIP file item type (accessible from the add item wizard) - allows you to upload static content and associated images very easily into a portal page/page group - all in just one single operation. Zip File items make it very simple to stage and maintain formerly static HTML Web sites.
2) WebDAV i.e. drag and drop the content. You can set a default region for which the content ends up in. More information is available at this link below:
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/PUBLISH_CONTMGMT/TECHNOTE_WEBDAV.HTML
3) From Portal version 9.0.2.6 onwards, content area APIs are available. See the portalstudio link below for more details.
http://portalstudio.oracle.com/servlet/page?_pageid=2746&_dad=ops&_schema=OPSTUDIO&12657_RELEASE2PLSQLHOME_39847486.p_subid=250746&12657_RELEASE2PLSQLHOME_39847486.p_sub_siteid=73&12657_RELEASE2PLSQLHOME_39847486.p_edit=0
4) Omniportlet & Web Clipping: Web Clipping may be considered for use as an intermediate step to display data from an external site within your Oracle Portal. More information here:
http://portalstudio.oracle.com/servlet/page?_pageid=350&_dad=ops&_schema=OPSTUDIO&12678_PDKHOME902_39847486.p_subid=350276&12678_PDKHOME902_39847486.p_sub_siteid=73&12678_PDKHOME902_39847486.p_edit=0
Additional information on content integration solutions (not necessarily directly related to your issue) can also be found here on PortalCenter.
http://portalstudio.oracle.com/servlet/page?_pageid=478&_dad=ops&_schema=OPSTUDIO&7655_MAINPAGE_39847486.p_subid=33750&7655_MAINPAGE_39847486.p_sub_siteid=73&7655_MAINPAGE_39847486.p_edit=0
Best Regards,
Harry

How to access the pre-delivered XI Integration Content for APO ,SCM or CRM

Guys,
Do anyone know how to access the pre-delivered XI Integration Content for APO ,SCM or CRM and load onto the XI server.
Any inputs in this direction is appreciated.
Thanks, -Vara.

Hi VaraPrasad,
you can try:
1. https://websmp204.sap-ag.de/swdc
2. Search for all Categories
3. type: XI content
then unpack and the easiest way is to import with the file system:
http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/content.htm
and you have the content on your XI
Regards,
michal

Unable to insert internal actions in process integration scenario

Hi, experts!
Can anybody please help me insert an action in my process integration scenario? I have created and activated actions that are internal (for own SWCV type of usage) but when I try to insert them in the scenario, I can only choose actions that have action class = external for that SWCV. Any idea what keeps the internal actions from appearing? Thanks in advance.
regards,
brent

but when I try to insert them in the scenario, I can only choose actions that have action class = external for that SWCV
Are you sure that you have followed the norm mentioned in this help page:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/68/88a440df800160e10000000a1550b0/content.htm
SAP Help:
Defined for a u2018separateu2019 software component version.
You can use internal actions in application components (of type Product Version or Main Instance) that (by using the product version) contain the same software component version in which the action is implemented.

Importing Process Integration Content

Similar Messages

Maybe you are looking for