Impossible to make the payment on ios dev center

Ok!
In my mavericks, I could access on morning.
This afternoon it was not the same.
I want a solution, right now!

I had to take the files from another 11.1.2 base install, you wouldn't be able to take them from another version.
I had to copy the xml files from \common\config directory and the .ora.products file, I am not sure why I hit the issue though.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

  • Payment Block removed or allow to make the payment after the due date

    Hi,
    Regarding Payment block, we have created one payment term with block indicator and assigned to some vendors. So each posting system will generate the entry with payment block, once the document crossed the due date (assume that 30days) system wants to allow to make the payment to the vendor without deleting or removing  the payment block. Is it possible.
    govind

    Hello,
    For this change, you need to develop a program and need to identify the age of 30 days invoices and remove payment block for those invoices. So 30 days aged invoices can clear.
    Logic: go to BSIK and find out ZFBDT of the document and deactivate the ZLSPR (Payment block).
    Or
    try to find out any functional module or user exit is available while clearing invoices. if available maintain the above logic.
    Regards,
    venkat

  • Is there a way to download ios7 while the ios dev center is down for maintenance?

    I enrolled yesterday to the ios dev center,  I received my confirmation e-mail but I can't subscribe because the website is in maintenance. I really need to have ios 7 and be able to push apps before tomorrow. Is there anything I can do?
    Thanks,
    Xtremagic

    "Is there anything I can do?"
    Wait.

  • Could you tell me please why I could not do the upgrade from Adobe Lightroom 5 to Lightroom 6 ( standard version not CC ) !? I make the payment, I have the confirmation of payment, i have the license key, but when I want to download my upgrade, i receive

    Could you tell me please why I could not do the upgrade from Adobe Lightroom 5 to Lightroom 6 ( standard version not CC ) !? I make the payment, I have the confirmation of payment, i have the license key, but when I want to download my upgrade, i receive the message "413 Header Length too large". Thank you. Catalin Mihaescu from [email protected]

    Are you using Chrome? I noticed these errors on Adobe's website redesign using Chrome. Try a different browser.

  • I am From Asia, Malaysia. I'm still was a student, I would like to purchase a Macbook at online With Student price. How I make the payment at online?? Am I able to used my dad's credit card?

    I am From Asia, Malaysia. I'm still was a student, I would like to purchase a Macbook at online with student price. How I make the payment at online?? Am I able to used my dad's credit card? or any proof?? Emergency ***

    http://store.apple.com/my/browse/home/education_routing
    If you have further questions about the policies and procedures for ordering, call the Malaysian Apple Store at 1800-80-6419. Everyone here is just a fellow user and cannot speak for Apple.
    Regards.

  • Why i can't delete Identifiers app ids in ios dev center?

    Hello Developers：
          why i can't delete app ids in ios dev center？  the delete button is disabled
    Thanks

    'unused' means never associated with any app...at all...for any purpose - it doesn't mean you haven't deployed the app to the store for distribution.

  • Unable To Login to iOS Dev Center

    Hi, I can login to iTunes Connect but unable to login to iOS Dev center ( I am  using same crediantials to login for both). My Role is "Technical".
    When I am trying to login to iOS Dev Center it is asking me to "Verify Email Address" again as I verified it first time.
    Please help me out of this problem.Thanks a Lot.

    I have this problem. I don't know if its relevant, but this account has been approved for iPhone Development (e.g. I paid my $99 and got access to the certificates) but I can no longer login. I have verified my login credentials by logging into the ADC site as well as this forum. I only have an issue when I try to use the credentials to login into the iphone dev center.
    Has anyone else had the same issues?

  • Is there any way to make the text in ios 7 easier on the eye?

    My Mom and CoWorker (they are both 50+) both did the upgrade to ios 7 and new coloring and font has been extremely hard on their eyes. Is there anything that can be done to help alleviate it? Their biggest complaint is that it's "TOO white". And just changing the background isn't going to help because there is the same problem in the new Calendar.

    I am trying to make the calendar readable also.  I am soooo disappointed because making the text bold or bigger and changing the contrast does not affect the calendar.  I will not change my mac until this problem is solved!

  • My Apple ID Password does not work with the iOS Dev Center

    Hello, When I go to log in to the Dev Center the password wil not recognise.  I have changed it serveral times and it says it is good but when i go to the dev center it does not work?  Please help, thanks

    How many IDs do you have?
    iOS dev?
    Mac app dev?
    ibooks?
    ..etc.
    How recent was this account activated?
    Which browser are you using to log in at the dev center(s)?

  • F110 - not able to make the payment error - Check amts -ex rate is too high

    Hi Experts,
    While running F110 Iam getting the below error. The proposal runs fine. When I run the payment run the status shows "Payment run has been carried out" but no document has been generated. The log says-
    "Job started
    Step 001 started (program SAPF110S, variant &0000000004845, user ID DWARKID)
    Log for payment run for payment on 16.02.2011, identification I0038
    Check amounts - exchange rate is too high (       10,348.00395-)
    End of log
    Job finished
    Its saying Ex Rate is too high. Could you please let me know how to resolve this.
    Thanks & Regards,
    Dwarak

    Hello Vishwa,
    I tried with both the options. Still getting the same error.
    Please let me know what needs to be done.
    Job started
    Step 001 started (program SAPF110S, variant &0000000004848, user ID DWARAKID)
    Log for payment run for payment on 17.02.2011, identification I0038
    Check amounts - exchange rate is too high (       10,348.00395-)
    End of log
    Job finished
    Thanks & Regards,
    Dwarakanath

  • I have set up payment method on i tunes as pal pal but when i try to make the payment it comes back declined,there is no issue on pay pal card it is some kind of glithch with i tunes.I want to use my pal pal account as my primary means of payment but your

    I have successfully created a payment account on I tunes through my pay pay account,however when I attempt to submit the payment,It shows declined.There is not a problem with my pay pal account the problem is with I tunes. can you please help me resolve this issue so I can pay on the account.I want pay pal to be my primary means of payment to I tunes thank you, billpeterfromyubacity

    Hi,
    Troubleshooting a start up script can be difficult. There are some third party programs that also keep logs of start up programs, however for Firefox this may be different.
    Is Firefox a startup program? [http://www.winxptutor.com/msinfo32.htm]
    Its also possible to check the Web developer tools for any scripts in a page: [https://developer.mozilla.org/en-US/docs/Tools/Debugger]
    In the control panel there is also Administrative tools to view event logs, but this may be something a local technician can walk you through.

  • Impossible to make the imac run again

    hello, I have got a brand new iMac and after shutting down for updating software it is impossible to make this machine run again? Any idea what happened?

    If it's brand new, and it won't boot at all (no sound, no light, etc.), then bring it in to your nearest Apple Store for warranty service.
    Even if it is making some sound, or generating some light, if it's brand new then it's under warranty. Call your local Apple Store for an appointment and bring it in for in-person help.

  • How to make the manual entry of cost center in MIRO

    Hi
    In MIRO, Cost center field is not populating for the PO without material and with the account assignment project P. I want the cost center to be populated in the MIRO screen.
    In OLMRLIST screen cost center tab is not fixed. Once the cost center populates in the MIRO i can fix it.
    Please let me know the detailed procedure of how to make the manual entry of the cost center in MIRO?
    Raja

    Hi,
    If the PO is Account assigned PO then in MIRO you need to select the Layout as Account assigned -Costcentre, the system will change the Layout of the MIRO.
    So on the line item of MIRO you will find the Account assignment arrow mark (just move rightside of the MIRO line item) press this arrow mark,
    then system will take to other screen where you can enter the Manual entery to the Cost centre along with G/L account in MIRO
    hope this solves your problem. To enter the cost manually you need to select the Layout as Account assignment -- Cost centre.
    rgds
    Chidanand

  • Make the Payment Terms field only editable by a user

    In the customization, itu2019s possible to make Payment Terms of a Purchase Order as display only field (Delivery/InvoiceTab - Header of a PO). This configuration applies for every user who creates or updates the purchase order. It is possible to make that only one user can edit this field as optional entry?
    Iu2019ve checked on security and thereu2019s not an authorization object for this configuration. Is there any other way to do this?
    Thank you.
    Best Regards.

    Hello,
    You cannot change property of field selections at user level. One way you can accomplish this requirement is by using transaction variant (Transaction SHD0).
    Thanks,
    Venu

  • How to Make the Payment Across the OUs

    Dear Experts,
    Our Client use to Purchase from one supplier called "X" and He has two OUs called "A" and "B" as per his business he is procuring Material from Supplier X for OU-A and OU-B since supplier is same he wants to Issues one consolidated check for the Invoices of OU-A and OU-B.
    My Client is asking for this requirement, I am not sure about it whether I can be possible or not so I told him as I will get back.
    Please let me know is it possible or not, If possible let me know what configuration is required in system
    Awaiting for your precious reply. It's 100% Urgent Please help me
    Thanks
    Bharath

    Hi,
    The note says we can not make a single check payment to two different operating units.
    If you want current requirement please raise the SR to oracle support.
    Regards,
    Raju.

Maybe you are looking for