In backflushing, how to get batch determination for IM managed components.

Hello friends,
During confirmation, in Goods Movements screen, we get auto batch determination for WM managed components (based on their control cycle record). However, we are NOT getting auto batch determination for IM managed components.
We have created batch selection/sort, and search strategy for Orders as well as Inventory Management. We have also created condition records for the above IM managed components. But still auto batch determination does not take place.
Kindly help how to get auto batch determination of IM managed components during confirmation. Thanks.
- Chetan

Hi Tajuddin, Prashob,
I marked my query as "solved", but I need one clarification please:
OSPX is a pre-requisite config to OPJ2. In OSPX, we have selection for "sorting" by Item-Table, Price, & Quantity. Can you please briefly explain how these 3 sorting is supposed to work ? Thanks.
- Chetan

Similar Messages

Automatic Batch determination for process order components

Hi ,
If we maintain the batch entry at MRP2 for the process order component as 3 - automatic batch determination upon order release ,if automatic batch determination is not happening for the order components and system is stopping to enter the batch for the component at order release , what else settings do we need to check ?
Please advice
Thanks ,
MK

Hi MK,
You need to go thru these configurations/setup:
1- CORC: Search Procedure is enter for Order type and Plant combination (PP-PI)
2- Assign the Search Procedure in transaction COR4 or OPL8 (COR4 for PPPI ot OPL8 for PP)
3- Batch Determination condition is maintained in COB1: this will generate the automatic determination of the batches.
4- Take a look of the field Batch Entry in MM02 (MRP2). This was already done by you.
Of course all your batches need to have the corresponding classification and you should assign correctly the search procedure in COB1.
Try with the previous steps and come back if you still don't get the automatic batch determination.
Best Regards,
Mariano

Batch determination for STO

Hi,
How to configure batch determination for Stock transport orders?
I just wanted to know to which business process we need to assign the search procedure

Your first message:
Hi,
How to configure batch determination for Stock transport orders?
I just wanted to know to which business process we need to assign the search procedure
This was answered I think.
Your second message:
These settings are manitained. I have checked the lik you sent. I too get exactly the same error.
You didn't speak about any error message in your first message nor (explicitly) in the second one.
Regards,
Csaba

Reg batch determination for nagative qty with backflush

Dear all,
In a process order for a component with batch management if quantity is given in negative and backflush activated,how to carryout batch determination.( I am getting error as batch cannot be determined for - ve quantities)
Thanks in advance
madhav

Hi,
In BOM if the qty is negative, that means its a By Product from the process. That means you are receiving a new batch of the product. here you need to assign (create) a new number for the batch.
Dilip Kumar

Batch determination for deliveries

Dear friends,
we have recently introduced batch determination for sto's. We are facing a poblem, we were suppose to get the batches only from one storage location, but system is taking batches from all storage locations where ever available according to search criteria. How can we restrict batches only from one storage location.
Thanks in advance.
Regards,
Sri.

Hi,
If u want to restrict batches on storage location level, then
You have to create CONDITION TABLE in that select field catlog STRORAGE LOCATION,
Assign this created table in ACCESS SEQUENCE,
Then asign this access sequence in STRATEGY TYPE which u r using.
Maintain condition records for Batch search strategy with key combination STORAGE LOCATION.
Note : if when creating condition table field catlog is not available for storage location, then you can add in that with the help of ABAPer.
Kapil

Batch determination for a component material of a production order.

I created a new production order type in SAP and I created a new production order from the new order type. When Iu2019m doing batch determination for a component material Iu2019m getting the error u201CBatch determination for 000000000002003610 without selection datau201D. I have to click [Selection criteria] and manually assign the selection criteria for the batch class.
This is working properly for existing production orders and system automatically picking up the selection criteria.
Is there any place in configuration to assign new production order type to batch selection criteria or how can I overcome this.

Hi,
Will you share steps you have completed so far for doing for Batch Determination?
It will help us to find the missing part..
- Check all the Batch Characteristic values are maintain in the Batches.If values are missing then also Determination will not take place.
- Check whether you have maintain Sort rule to Batch Determination strategy or not
Regards,
Dhaval

Batch determination for subcontract orders in MIGO

Hi,
I have a doubt. I´ve customized a batch determination strategy for Inventory Management, for movement type 543.
When i receive a subcontract order, using transaction MIGO, the batch determination process is NOT triggered automatically, until i press button "Stock Determination".
Is there a way to determine batches in MIGO without pressing this button? (fully automatic).
Best regards.

Hello Alejandro,
Thanks for the further clarification!
It depends on how you are processing the goods receipt in MIGO:
.- If you post the Goods Receipt for the Subcontracting purchase order and you do not expand the components, then just flag the main item and post, an automatic batch determination for the batch component will be processed then by the system and the goods receipt will be processed.
.- If you post the Goods Receipt for the Subcontracting purchase order and you expand the components, then, the batch field will be opened for input and the user manually will need to start the process pressing the icon for the batch determination (or also the one for the stock determination).
I hope this helps!
Esther

Auto Batch Determination for Subsequent Delivery (P.O Subcontracting)

Hi Experts,
I have one subcontracting P.O with batch managed child components.
First of all i have configured/activated the autobatch determination for IM based on the MT543.
The system is able to perform autobatch determination for the subcontracting components when I perform Good Recipet against the subcontracting P.O (MT 101 for parent item and MT 543 for the child components). I then perform the return delivery to vendor using MIGO for the subcontracting P.O (w/ MT122 for the parent item and MT544 for the subcontracting components). Subsequently, using MIGO I perform Subsequent Delivery(A06) with reference to Material Document no. created for return to vendor (MT122) but here the system does not seems allow to use the autobatch determination function to automatically re-assign the batch no. for the subcontracting components (also system set default MT543 to issue the components).
How do I enable the auto batch determination function for the subcontracting P.O component when I perform the Subsequent Delivery for the subcontracting P.O? (which is based on the MT543 that i have configured/activated beforehand).
Thanks

Hi,
how have you activated batch determination in mtype - 543 ?
Plz revert..
thanks in advance...
Regards,
Paras

FEFO logic in batch determination for process order release

Batch determination for a particular material in a process order was following FIFO logic . We needed to change it to FEFO hence we made the necessory changes in COB1 how ever the process order relase is still taking the batch whihs is not the first expiry batch
Kindly help in batch determination with FEFO for process order release.

Rk
The blw explation for inventory side, i don't have idea for prod order side
If Batch Management is active for the materials then use following process;
First create characteristic in CT04 for Batch Creation Date, under "Addnl data", enter Table Name MCH1 or MCHA (As per Batch Class 022 or 023) and Field ERSDA and save it.
Assign this characteristics in CL02 in your Batch Class.
CU70 - Create a Sort Rule and specify the Characteristic of Batch Creation Date and activate "Ascending" indicator.
Now assign the Sort Rule in MBC1 and keep Selection criteria as "O" for the Strategy type.
Now do batch determination in MIGO.

How to get internet settins for i phone4

how to get internet settins for i phone4

An Apple AirPort is a router, so you're covered there. The only other device required is a modem, and there are many of them from which to choose. Does your ISP supply one, and if so, can you determine its model number?
Modems can be purchased for $30. You first need to ask your ISP what equipment they plan to supply, if anything. Modems are commonly supplied for $0, to be returned if and when you cancel their service. Some ISPs want to supply a modem but charge you a rental fee. Whatever that fee is, it's not worth it.

How to get Open Balance for the year and Total Ending Balance?

For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.

Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM

A^b = n ,How to get the value for a ?

a^b = n ===> n = Math.pow(a,b)
How to get the value for a ?
dose Java have API to get the value for a ?
Thanks for help~~~

a^b = n
=>
a = n^(1/b)
So,
a = Math.pow(n,1.0/b)

How to Get Missing Dates for Each Support Ticket In My Query?

Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!

CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

How to get the date for the first monday of each month

Dear Members,
How to get the date for the first monday of each month.
I have written the following code
SELECT decode (to_char(trunc(sysdate+30 ,'MM'),'DAY'),'MONDAY ',trunc(sysdate+30 ,'MM'),NEXT_DAY(trunc(sysdate+30 ,'MM'), 'MON')) FROM DUAL
But it look bith complex.
Abhishek
Edited by: 9999999 on Mar 8, 2013 4:30 AM

Use IW format - it will make solution NLS independent. And all you need is truncate 7<sup>th</sup> day of each month using IW:
select sysdate current_date,
        trunc(trunc(sysdate,'mm') + 6,'iw') first_monday_the_month
from dual
CURRENT_D FIRST_MON
08-MAR-13 04-MAR-13
SQL> Below is list of first monday of the month for this year:
with t as(
          select add_months(date '2013-1-1',level-1) dt
            from dual
            connect by level <= 12
select dt first_of_the_month,
        trunc(dt + 6,'iw') first_monday_the_month
from t
FIRST_OF_ FIRST_MON
01-JAN-13 07-JAN-13
01-FEB-13 04-FEB-13
01-MAR-13 04-MAR-13
01-APR-13 01-APR-13
01-MAY-13 06-MAY-13
01-JUN-13 03-JUN-13
01-JUL-13 01-JUL-13
01-AUG-13 05-AUG-13
01-SEP-13 02-SEP-13
01-OCT-13 07-OCT-13
01-NOV-13 04-NOV-13
FIRST_OF_ FIRST_MON
01-DEC-13 02-DEC-13
12 rows selected.
SQL> SY.

Qry:How to get different price for each price list (variable area) in order

1-How to get different price for each price list (variable area) in order for sale. for the opportunity to display and select multiple prices.
2- I add a location store from a table in line item and I want to see this area in order,.
I 'm created 2 field location(item line and order), 1 table location
I tried this for exemple : select $ [userfieldlocation.OITW]

Thanks Suda for your answer,
the Formatted Search for prices is OK, but for the Item locations in warehouse this is not so simple,
I must have several (at least 2) locations for the item in the Warehouse and a track of this location and search possibilities.
read carefully and imagine how (Management warehouse locations)
I added a user table '@Location' who linked to a user field 'U_Location in Item master data --> lnventory data line and an ather user field 'U_Location' in sales order
I met the value of location in the table (list of locations for any warehouse), I select the location of each item while receiving merchandise in the user field of inventory data line (Item M data) and this value appears in the sales order 'U_Location' user field ( only the location value in the default warehouse for this Item)
or
create an user field 'location' in Good receipt PO to fill it while receiving merchandise that appears in the sales order to give possibility to find/select the location of the item at this order and in Item master data
I think we will use all these tables
@LOCATION
PDN1
OITM
OITW
OWHS
RDR1
Juste a another question : where you found this and What is: ' 38.1.0 '
Is it in document (System information):Item=38 Pane=1 ??
Thanks,
Ouchen

In backflushing, how to get batch determination for IM managed components.

Similar Messages

Maybe you are looking for