* in batch field is not displaying all batches based on criteria

Hi Experts,
I've done necessary configuration for batch determination. whenever am issuing goods using MB1A or MIGO, if I put * in the batch field, system is automaticlly selecting the batch . Eventhough that batch number is correct ,but I need, the system to display all possible batches and I want to select the same. how to achieve this.
thanks,
satish

Have you maintained any characteristics for batch determination.
If not, then system will not be differentiate between two batches and will pick up any batch when you put *.
However if charactertics are mainatined, system will be allow you to determine batch when you click drop down on batch ni.
Hope this clarifies all your queries.
Regards
Bhavesh Mistry

Similar Messages

  • Ipad contacts not displaying all fields from mac address book, ipad contacts not displaying all fields from mac address book

    After syncing mac address book to ipad contacts, the ipad does not display all the fields that were in Mac address book (in my case all the email addresses).  Anyone have a fix?

    I have a problem similar to DeeRun's.. I would like the IM fields to be synced.. I use them to send e-mails to when the e-mail field is empty or when i just want to use that specific address.. Very annoying, would take hours if not days to transfer all those IM adresses to e-mail fields in addressbook..
    EDIT: not to mention the mess it would make in my address book!
    Message was edited by: 1NStanley

  • Form does not display all records from table

    Hi guys
    I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
    Any help will be appreciated.
    Thanks

    hi
    Set the block property of "Query All Records" to "YES"
    hope it will work.
    Faisal

  • F-90. asset value date field is not displayed

    Dear all
    In asset acquisition posting through F-90. asset value date field is not displayed at the time of entering acquisition. It is in supress mode. so system is capturing the capitalisation date. But we can see this capitalisation date as asset value date in fb03 display. Now i want to display this field as optional field while creating the entry and also i want to change the field in display mode to change mode. kindly tell me the menu path to access the settings.
    Thanks With  Regards
    RSS.

    Hi,
    You can enter a diff asset value date for your acq posting, only thru transaction ABSO using TType 100.
    This will resolve your issue.
    Thanks,
    Srinu

  • TS1347 icloud contacts "home field" dose not display on ios7?

    When looking at contacts that are stored using icloud on my ios devices, the home field is not displayed even when edited. 
    This has only happened recently but when I log into icloud using a browser all of the details are there.
    Please can this be fixed?
    Thanks
    Problem using iphone 4s / 5 / ipad mini. ios 7.04.

    Thank you for your response.  I guess I should have indicated the things that I have already tried .  I have already attempted this step couple of times on the iPhone.  I also deleted the iCloud account on the iPhone and added it back on.  None of those things had any effect.  I guess the next thing I could try is backup>full reset.

  • New ALV field is not displaying

    Hi
    I have added the currency field in the existing ALV report.
    The final internal table having the currency field and it has value. Curreny field is not displaying in output. Pls help
    Below is my ALV code for currency.
    PERFORM FILL_FIELDCAT USING
    'WAERS' SPACE SPACE 'CURRENCY' 'CURRENCY' 'CURRENCY'.
    READ TABLE GIT_FIELDCAT INTO LX_FIELDCAT
              WITH KEY FIELDNAME = 'WAERS' .
      LX_FIELDCAT-OUTPUTLEN = 5.
      LX_FIELDCAT-JUST       = 'L'.
      MODIFY GIT_FIELDCAT FROM LX_FIELDCAT INDEX SY-TABIX.
    FORM FILL_FIELDCAT USING    P_FIELDNAME
                                P_NO_OUT
                                P_DO_SUM
                                P_SELTEXT_S
                                P_SELTEXT_M
                                P_SELTEXT_L.                    "#EC *
      DATA: LX_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
      CLEAR LX_FIELDCAT.
      LX_FIELDCAT-TABNAME    = 'GIT_LIST'.
      LX_FIELDCAT-FIELDNAME  = P_FIELDNAME.
      LX_FIELDCAT-NO_OUT     = P_NO_OUT.
      LX_FIELDCAT-DO_SUM     = P_DO_SUM.
      LX_FIELDCAT-SELTEXT_S  = P_SELTEXT_S.
      LX_FIELDCAT-SELTEXT_M  = P_SELTEXT_M.
      LX_FIELDCAT-SELTEXT_L  = P_SELTEXT_L.
      APPEND LX_FIELDCAT TO GIT_FIELDCAT.
    ENDFORM.                               " FILL_FIELDCAT

    You have to [maintain maintenance dialog|http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/a7/513484407a11d1893b0000e8323c4f/frameset.htm] as described in the link.
    Regards,
    Raymond

  • DWMX Not Displaying All Files

    Hello folks. This is my last attempt to locate a solution for
    why my DWMX is not displaying all my files in my local or remote
    folder. I have a new client who has put us in charge of moving
    their site to a new server. When I create a new site in DWMX, it
    allows me to download and upload just fine, ALL of the site.
    Problem is, DWMX will only display a certain number of files in
    both the local and remote views. In my windows explorer, it shows
    all the files, on the new server it shows all the files, but DWMX
    will not. The folder in question is the dumping ground for all
    their self-managed content images for their site. So it is hard to
    split these up into multiple folders and expect the code to work
    properly.
    Has anyone else experienced this problem? If so, is there a
    solution to this problem with DWMX?
    Thank you.

    Are you using DMX6.0 or DMX6.1? If the former, please update
    to the latter
    at your earliest opportunity - use the updater on the Adobe
    site, please.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "csnetworks" <[email protected]> wrote in
    message
    news:fai93r$hj$[email protected]..
    > Hello folks. This is my last attempt to locate a
    solution for why my DWMX
    > is
    > not displaying all my files in my local or remote
    folder. I have a new
    > client
    > who has put us in charge of moving their site to a new
    server. When I
    > create a
    > new site in DWMX, it allows me to download and upload
    just fine, ALL of
    > the
    > site. Problem is, DWMX will only display a certain
    number of files in
    > both the
    > local and remote views. In my windows explorer, it shows
    all the files,
    > on the
    > new server it shows all the files, but DWMX will not.
    The folder in
    > question is
    > the dumping ground for all their self-managed content
    images for their
    > site.
    > So it is hard to split these up into multiple folders
    and expect the code
    > to
    > work properly.
    >
    > Has anyone else experienced this problem? If so, is
    there a solution to
    > this
    > problem with DWMX?
    >
    > Thank you.
    >

  • Status bar of Oracle from runtime applet is not displaying all of a sudden

    Hello,
    The status bar of Oracle form runtime applet is not displaying all of a sudden..It was displaying before but now its not......It helps me to see errors......how can I restore it?

    My console was set to a specific window name..it was not null at all....but the status bar wont show...
    But I solved it ...by changing the applet size...
    Applet container size is controlled by the HEIGHT and WIDTH parameters in the formsweb.cfg. To maximize the applet area to the size of the browser, do the following:
    HEIGHT=100%
    WIDTH=100%
    Thank you all for your help and support...
    Edited by: user10746194 on Feb 11, 2010 6:33 AM

  • I wanted to know if others were having difficulties getting All Day Events appear in the Notification Center in iOS 7.   Currently my Calendar in the notification center will show events that are at certain times, but they will not display All Day Events.

    I wanted to know if others were having difficulties getting All Day Events appear in the Notification Center in iOS 7.
    Currently my Calendar in the notification center will show events that are at certain times, but they will not display All Day Events.

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

    I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

    And I cant work out why all of my pictures are not diplaying in iphoto?
    Is this iPhoto on your Mac?  Are you referring to the photos that were in your iPhoto LIbrary prior to the upgrade to iPhoto 11?  If so then apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    If that's not what you're referring to then you should describe what is happening in more detail. Remember we can't see your Mac or your iPhone so need detailed and accurate descriptions of what you're experiencing.
    Also we need infomartion like do you have an iCloud account and are you logged into it on all of your devices, iPhoto and Mac? do you have Photo Stream enabled on both.
    OT

  • Photo App does not display all photos

    Running iOS 7.0.4 on an iPhone 4S. The new Photo App does not display all photos properly. All photos show up as thumbnails. However, when you tap on some of them, only a blank page is displayed. The rest is fine. This issue started after the upgrade to iOS 7. Is this a bug? Hardware-related?

    Upon closer inspection it appears that the missing photos are in a folder called IPhoto Library.  This folder is greyed out when I choose the import folder.
    When I use 'show package contents' it reveals the missing photos (below).  Why is my iphoto library so scrambled!  Thanks for any insight.

  • Query not displaying all records when execute it first tme

    Hello,
    i have an issue with the WEBI report.when i run  the report first time it's displaying only few records, but when i run the same report second time it's displaying the more records and it's correct.
    Could any one tell me why it's not displaying all records when i execute first time.
    Thanks in advance for your help.
    Regards,
    Prathap

    Which BOBJ version do you use?
    Which kind of data source are you retrieving data from?
    Regards,
    Stratos

  • Finder not displaying all files in remote directory

    Sorry, this is a repost as I have gotten no response from my original request here: Finder not displaying all files in remote directory
    I've exported pictures from iPhoto on my iMac to a shared directory on my mac mini. When I access that directory from my iMac, I can see some but not all of the pictures. I know the pictures exported properly because I can see them all from the mac mini. I can open up a terminal window on my iMac and see all of the files; I can also open those files from the terminal.
    I'm running OSX 10.9.4 on both computers, with the mac mini also running OSX Server. I've placed a screen grab below from my iMac of what Finder sees vs what I can see from the terminal.
    Why isn't Finder displaying all of my files?

    thanks for responding
    Adding a new file to the shared folder results in me being able to see the new file from my clients regardless of where it was added from, however the "hidden" files do not suddenly pop up.
    I tried a few more experiments that had interesting results, but still didn't lead me to an answer.
    First I tried copying the files from the remote directory to a local directory; I did this in 2 different ways and had different results. Method A) I copied files from the mounted share to a local dir: "cp /Volumes/MyShare/dir/*.JPG .". Method B) I copied the files using secure copy: "scp user@server:/path/to/dir/*.JPG .".
    Method A resulted in Finder not being able to see the files in the local directory, while Method B did. This was interesting and lead me to suspect an issue with the way I am sharing the directory on the server. From Server settings I have both afp and smb checked. I tried enabling only one or the other and reconnecting; but this did not fix the problem.
    Next I tried exporting the photos from iPhoto again. Exporting them locally results in files that Finder can see. Exporting them to my server results the same bad behavior
    Getting desperate, I also tried renaming all of the files from "*.JPG" to "*.jpg" but this didn't help.
    One last experiment, I see the same behavior from both another Mac and a PC on my local network... FTP works fine.
    Any more ideas?

  • SQL expression field is not displayed on the page header if no records

    Hello
    I'm creating a quite simple report. In this report I've got a SQL expression field which returns a DateTime
    I display this field on the page header section.
    Everything is working fine except when my principal query doesn't return any records my SQL expression field is not displayed. It doesn't seem to be evaluated.
    So, I would display this field even if my Details Section doesn't contains any record.
    I hope you understand what I mean.
    Can someone help me?
    thanks

    Hello,
    I thought about creating a formula but the value I need is stored in a database.
    So i created a simple SQL expression field.
    SELECT CONVERT(DATE,j_1) FROM VW_STD_DATEFIXING
    And this expression doesn't have any dependencies.

  • Filter not displaying all values

    When I attempt to filter a product code. the drop down list (under heading Expression) displays about 100 codes when in reality there are about 2000 values.
    I have changed the Maximum Rows per Page under Search Bar to 2000, but this still does not display all the codes.
    Is there a setting I am missing?

    I think that your description of the problem doesn't help a lot. Are you using interactive reports?
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

Maybe you are looking for