In complete Data into substitution

Hi,
I've implemented a substitution for MIRO, which picks the suitable cost element for profit center, which are maintained in OKB9
But in substitution is having COBL and COBK structures. but COBL-PRCTR is not having any value, due to that i am getting an error as: 'Account 40002304 requires an assignment to a CO object'. We don't want to maintain default cost element. It should pick from the list which is maintained in OKB9.
How to get the COBL-PRCTR value into substitution.
Regards,
Naveen

Hi,
try to implement the substitution Exit iby copying the program RGGBS000 to Y or Z program and maintain the same in V_t80d transaction.
Assign the newly created exit in the substitution step .
you will find out the standard structure BKPF, BSEG,COBL etc
Write the logic in to the exit to fetch the value from the OKB9 transaction table. and put into the COBL-PRCTR.

Similar Messages

Legacy data into new UCM Solution

we are implementing new UCM solution to one of my client,
Client is having lots of legacy data(>2TB), and they want to move the complete data into new UCM Solution?
My question is, what is the way to convert the whole data in to UCM Content server?

I assume that you are aware of the productised UCM Siebel integration...are you wanting to load legacy data and make it available through this? Even if you are the approach is much the same.
OK so if on a file system then what you need to do is work out how you can derive metadata either from the directory structure OR the Siebel DB or the content itself - those are in order of difficulty and time taken I would say.
The simplest thing to do is to use this information to create batchloader scripts. Why not try and create some test scripts where you load in 100 items or similar and see if the results/performance are aceptable.
It will take a long time to load 2TB of data - how many separate files is this? So you may need to devise a schedule for doing this in a number of smaller migration runs.
Tim

Saving a complete date to access database

Hi, I am currently struggling with databases and dates, the database I use is an access database (It's obligated in the assignment). Now, what I want to do is save a COMPLETE date into the database, with this I mean: day,month,year,hour (minutes and seconds aren't necessary, but I can just put them to 00:00). Any ideas how I can add this to an access database AND order the entries by these dates? Or is it just not possible with access? (I know how I could do this in mysql, but as I said is is not allowed)

ok, but I have to say I'm new to the whole preparedstatement thing, I tried what you said, but now I get an 'arrayindexoutofboundsexception', any ideas on why this happens? here's the most important piece of the code:
               dbconn = new DbConnect();
               PreparedStatement pstmt = dbconn.getConn().prepareStatement("INSERT INTO Reservaties (datum,sorteerdatum,uur,terrein,gebruikersnaam) VALUES ('?',?,?,?,'?')");
               pstmt.setString(1,reservatie.getDatum());
               pstmt.setTimestamp(2,reservatie.getSorteerDatum());
               pstmt.setInt(3,reservatie.getUur());
               pstmt.setInt(4,reservatie.getTerrein());
               pstmt.setString(5,reservatie.getGebruikersnaam());
               pstmt.executeUpdate();
               dbconn.close();

Activity Completed Date

Hi,
On activity entity, i want to capture completed date and store it in indexed date field. also, when completed date is modified, i want same value to get updated in indexed date field. For this, i thought of doing predefault value on indexed field and workflow, but, at neither place i see, completed date available for manipulation. At field predefault level, i tired various Completed_Datetime, Completed_Datetime_ITG, Completed_DateTime, Completed_DateTime_ITAG, CompletedDatetime etc. but none of these work.
Can anybody please suggest workaround to achieve the above.
Thanks

Hi Juno,
Thanks for replying. I want to put completed date into another field, upon activity creation. I dfon't worry about casting datetime to date. I want to do predefault value [<Completed_Datetime>] But i am not getting ITAG afor completed date. If anybody has ITAG for defaulting field with completed date, it would be great.
Thanks

Calc of VAT in ext system: how to get complete data in BSET/RFUMSV00

Hello
We have a system that posts into SAP FI GL via BAPI BAPI_ACC_DOCUMENT_POST . The external system does not contain tax codes but it does calculate tax amounts and has GL account determination. How do I get the complete data in BSET so that I can use RFUMSV00 as the sole report on VAT for the client? Other formulation: how do I post an invoice from a vendor without using a tax code or should I use a dummy tax code VST without percentage number?
regards
Arjan

Hi Deepa,
I tend to develop a substitution (OBB)that adds a tax code to the interface posting so that in SAP I have for every VAT amount/document a tax code. Otherwise I cannot use RFUMSV00...

How do I put data into a template using the Labview report generation toolkit for Microsoft Office?

I am running Lookout 5.0 and have recently purchased the Labview Report Generation Toolkit for Microsoft Office to create reports from my Lookout logged data. Since I have never used Labview I am having my problems. I tried following the tutorials but they do not seem to be examples of what I want to do.
I log rainfall totals (1 spreadsheet)in Lookout from 40 different sites in 5 minute increments. I copy these totals and paste them into another spreadsheet which sums them up to give me hourly totals and then paste those totals into a spreadsheet for distribution.
In Labview I create a new report and use the distribution sheet as my template, but how do I complete
the steps of loading the raw 5 minute data into labview and then paste it into the hourly total spreadsheet and then transfer those totals into the distribution template?
I have been trying to figure this out for over a week, and I am getting nowhere.
Any response would be appreciated.
Thanks
Jason P
Jason Phillips

Lookout saves the files in .csv form which can be opened in Excel. I did make some progress by using the "append table to report" vi which allowed me to put values into an array and then those values were entered into my template on my report vi.
Where I am stuck now is I want to be able to put values into my template from a .csv file, not from an array I have to manually put numbers in.
Once those values are in my template I want to pull summed values from the template and place them into a final excel file for printing.
I have attached examples of the files I am working with to help you better understand what I am trying to do.
I hope that makes sense.
Jason Phillips
Attachments:
HourlyTotalsTemplate.xls ‏120 KB
eb_rain_gauge_ss.csv ‏23 KB
EastBankHourlyRainReport.xls ‏28 KB

How to get the complete data from Webdynpro using a RFC

hi guys,
A form is created in the webdynpro, when that pdf form is called the user have to provide the key field ie the employee number in the form and then when he press the 'go' button a rfc is called and it gives all the details of the employee in the form. Then the user have to input some fields in the form and he have press the submit button. My problem is here, when the user is going to press the submit button that form will be converted to a stream (binary) of data and it is sent to one of the import parameter used in the RFC.
I have created a RFC and created a import parameter of data type XSTRING, since i want to see what exactly R3 is receiving from web dynpro i am writing this contant in the sever as a text file. When i saw that text file i cant see the complete data.
And when i searched in R3 the capacity of xstring is 1024 CHAR, so i dont know how to capture the entire data from webdynpro into my R3.
I give the code what i worte please tell me am i missing anything in my code, or is there any data type which can hold more than 500kb of data which is coming from webdynpro.
FUNCTION ZSEND_MAIL_ATTACHMENT.
""Local Interface:
*" IMPORTING
*"     VALUE(OUT_PLACE_LEVEL) TYPE XSTRING OPTIONAL
*"     VALUE(BIN_DATA) TYPE INDX_CLUST OPTIONAL
*" TABLES
*"      IT_MESSAGE STRUCTURE SOLISTI1
Data Declaration
DATA: gd_cnt TYPE i,
      gd_sent_all(1) TYPE c,
      gd_error TYPE sy-subrc,
      tab_lines LIKE sy-tabix.
Structure Declaration
DATA : BEGIN OF it_file OCCURS 0,
          row(255),
         END OF it_file.
DATA : BEGIN OF i_split OCCURS 0,
row(50),
END OF i_split.
Internal Table Declaration
data : it_receivers like table of SOMLRECI1 with header line."occurs 0.
DATA : objbin LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE. "sOLIX
DATA : it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
data : wa_receiver like table of SOMLRECI1 with header line.
data : it_receiver like table of SOMLRECI1 with header line.
data : v_bin_data like SOLISTI1 occurs 0 with header line.
DATA : gd_doc_data LIKE sodocchgi1 OCCURS 0 WITH HEADER LINE.
*data bin_data1 like table of solix with header line.
REFRESH : objbin, it_packing_list, it_receivers, wa_receiver.
CLEAR   : objbin, it_packing_list, wa_receiver, it_receivers.
DATA V_SUBJECT(255) VALUE 'HI'.
gd_doc_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( it_message ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SENDFILE'.
gd_doc_data-obj_descr = v_subject.
gd_doc_data-sensitivty = 'O'.
APPEND GD_DOC_DATA.
Appending The Internal Table it_packing_list
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'RAW'.
it_packing_list-body_num = tab_lines.
APPEND it_packing_list.
*CALL FUNCTION 'GUI_UPLOAD'
*EXPORTING
*filename = V_FILE_PATH
*filetype = 'BIN'
*TABLES
*data_tab = BIN_DATA.
move bin_data to v_bin_data.
append v_bin_data.
*move soli to bin_data.
LOOP AT V_BIN_DATA into objbin.
MOVE v_bin_data TO objbin-line.
    APPEND objbin.
ENDLOOP.
CLEAR it_packing_list.
DESCRIBE TABLE objbin LINES tab_lines.
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'PDF'.
it_packing_list-body_num = tab_lines.
it_packing_list-doc_size = tab_lines * 255.
APPEND it_packing_list.
data file(255) value '/tmp/bali.txt'.
*Appending The Internal Table it_receivers
close dataset '/tmp/bali.txt'.
open dataset '/tmp/bali.txt' for output in text mode encoding default.
if sy-subrc = 0.
loop at objbin.
transfer objbin to '/tmp/bali.txt'.
endloop.
else.
write 'hi'.
close dataset '/tmp/bali.txt'.
endif.
it_receiver-receiver = '[email protected]'.
it_receiver-rec_type = 'U'.
it_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
*Move wa_receiver[] to it_receivers[].
Clear it_receivers.
if i_OUT_PLACE_LEVEL NE 0.
loop at it_receivers into wa_receiver.
   loop at it_receivers into wa_receiver.
**Function Module To Post The Message To Externa Mail
     CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
         document_data              = gd_doc_data
         put_in_outbox              = 'X'
         commit_work                = 'X'
       TABLES
         packing_list               = it_packing_list
         CONTENTS_TXT               = objbin
         receivers                  = it_receivers
       EXCEPTIONS
         too_many_receivers         = 1
         document_not_sent          = 2
         document_type_not_exist    = 3
         operation_no_authorization = 4
         parameter_error            = 5
         x_error                    = 6
         enqueue_error              = 7
         OTHERS                     = 8.
     clear wa_receiver.
ENDFUNCTION.

You have to convert your long string to a table of shorter strings.
There may be other ways, but one possibility is to use a loop to process you string.
while (there is something left)
   put the next e.g. 1024 characters in a new row of your table
endwhile
If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

How to write a procedure to load the data into a table using xml file as input to the procedure?

Hi,
Iam new to the xml,
can u please anyone help me how to write procedure to load the data into a table using xml as input parameter to a procedure and xml file is as shown below which is input to me.
<?xml version="1.0"?>
<DiseaseCodes>
<Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
</DiseaseCodes>.
Regards,
vikram.

here is the your XML parse in 11g :
select *
from xmltable('//Entity' passing xmltype
'<?xml version="1.0"?>
<DiseaseCodes>
<Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
</DiseaseCodes>
') columns
"dcode" varchar2(4000) path '/Entity/dcode',
"ddesc" varchar2(4000) path '/Entity/ddesc',
"reauthflag" varchar2(4000) path '/Entity/reauthflag'
dcode ddesc reauthflag
0 (I87)Other disorders of veins - postphlebitic syndrome 0
0 (J04)Acute laryngitis and tracheitis 0
0 (J17*)Pneumonia in other diseases - whooping cough 0
SQL>
Using this parser you can create procedure as
SQL> create or replace procedure myXMLParse(x clob) as
2 begin
3 insert into MyXmlTable
4 select *
5 from xmltable('//Entity' passing xmltype(x) columns "dcode"
6 varchar2(4000) path '/Entity/dcode',
7 "ddesc" varchar2(4000) path '/Entity/ddesc',
8 "reauthflag" varchar2(4000) path '/Entity/reauthflag');
9 commit;
10 end;
11
12 /
Procedure created
SQL>
SQL>
SQL> exec myXMLParse('<?xml version="1.0"?><DiseaseCodes><Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity></DiseaseCodes>');
PL/SQL procedure successfully completed
SQL> select * from MYXMLTABLE;
dcode ddesc reauthflag
0 (I87)Other disorders of veins - postphlebitic syndrome 0
0 (J04)Acute laryngitis and tracheitis 0
0 (J17*)Pneumonia in other diseases - whooping cough 0
SQL>
SQL>
Ramin Hashimzade

Reschedule strategy plan based on last actual order completion date

Dear all,
Hope you can help me with this one.
We use strategybased maintenance plans. We want to achieve that the next scheduled call date is calculated taking into account the actual completion date of the last (previous) call.
For example :
strategy = 1 maintenance order every 52 weeks.
start of cycle = 01.01.2009
First call created a mainenance order for 01.01.2010
This order did however only get actually completed on 20.02.2010 (so actual completion date of last call = 20.02.2010 ).
Now we want that the next call is rescheduled to 20.02.2011 ( so the last actual date + the 52 weeks from the strategy)
This we can achieve for one maintenance plan at a time by using transaction IP10 and than the funtion "start in cycle' .
However we want to achieve this for a mass selection of maintenance plans in one go.We cannot find a suitable transaction that does do this.
For example IP30 simply keeps rescheduling using the "startdate of the cycle" instead of the "last actual date".
Does anyone have a suggestion how we can solve this?
Many thanks in advance!
Kind Regards,
Arjan

Hi,
Please follow as suggsted by BroermanG . In Addition to that please ensure that the positive & Negative Tolarance is maintained as zero value in the Scheduling Paramters of the Plan.
Then the system will take care of your requirements. You need not use IP10 and reschedule to get the desired schedule.
You can run the IP30 normally.
Regards,
MLN Prasad

Publish dates into iCal from Numbers

I am trying to publish dates from a chart in Numbers to iCal or Outlook calendar. Is this something that can be done?

Solved, I think! What you need to do is log on to your icloud account at www.icloud.com, go to the calendar screen, click the gearwheel and choose New Calendar. Create a calendar here (ie up on the iCloud) with the name you want for your imported calendar data. Then switch to iCal - you may have to quit and relaunch for the new iCloud calendar to appear (or it will probably do so automatically if you wait long enough) then import the data using File->Import->Import... When you get to the step where it asks which calendar you want to import the data into, choose the new iCloud calendar you've just created. Job done!
To be complete in my answer, I don't think you can exactly do what you want to do, at least not at present. There doesn't seem to be any way to publish a calendar to iCloud after the first time you set up iCloud on your Mac when it exports any calendar data that is on the Mac at that time. I suppose that Apple feel that the way I have described works by exporting from one calendar and importing into another, so no need to provide a way of doing it directly.

How to add data into a List box

CS3 SDk:Windows Hi all, I am trying to add data into a basic List box in CS3?? // .fr GenericPanelWidget ( // CControlView properties kInvalidWidgetID, // widget ID kPMRsrcID_None, // PMRsrc ID kBindNone, // frame binding Frame(0,0,250,90) // left, top, right, bottom kTrue, // visible kTrue, // enabled // GroupPanelAttributes properties "", // header widget ID { WidgetListBoxWidgetN ( kWFPListBoxWidgetID, kSysListBoxPMRsrcId, // WidgetId,RsrcId kBindAll, // Frame binding Frame(0,0,250,90) // Frame kTrue, kTrue, // Visible, Enabled 1,0, // List dimensions 19, // Cell height 1, // Border width kFalse,kTrue, // Has scroll bar (h,v) kTrue, // Multiselection kTrue, // List items can be reordered kTrue, // Draggable to new/delete buttons kFalse, // Drag/Dropable to other windows kTrue, // An item always has to be selected kFalse,// Don't notify on reselect kFalse, { } ), }, ), //-------ID.h-------- DECLARE_PMID(kWidgetIDSpace, kWFPListBoxWidgetID, kWFPPrefix + 2) //observer.cpp-----------WFPDialogObserver::Update //get currently selected/active widget WidgetID theSelectedWidget = controlView->GetWidgetID(); // ist it the text edit field? if (theSelectedWidget == kWFPInsertButtonWidgetID && theChange == kTrueStateMessage) { IControlView* listBox = panelControlData->FindWidget(kWFPListBoxWidgetID); InterfacePtr<IListControlData> listControlData(listBox, UseDefaultIID()); //Insert the string into listbox PMString strText = dialogCtrl->GetTextControlData(kWFPTextEditBoxWidgetID); // obviously there can't be a translation for text entered by user strText.SetTranslatable(kFalse); listControlData->Add(strText,kWFPTextEditBoxWidgetID); dialogCtrl->SetTextControlData(kWFPTextEditBoxWidgetID, ""); break; I am not able to Add items into list box. I tried based on Discussion http://www.adobeforums.com/webx/.3bc43877 but not able to locate SDKListBoxHelper file .it is not available in SDK. Please , Tell me Where I am going wrong. Thanks, Adil

resource VSPDialogWidget (kSDKDefDialogResourceID + index_enUS)
 __FILE__,
 __LINE__,
 kVSPDialogWidgetID, // WidgetID
 kPMRsrcID_None, // RsrcID
 kBindNone, // Binding
 Frame(5,0,491,266) // Frame (l,t,r,b)
 kTrue,
 kTrue, // Visible, Enabled
 kVSPDialogTitleKey, // Dialog name
 DefaultButtonWidget
 kOKButtonWidgetID, // WidgetID
 kSysButtonPMRsrcId, // RsrcID
 kBindNone, // Binding
 Frame(9,234,89,254) // Frame (l,t,r,b)
 kTrue,
 kTrue, // Visible, Enabled
 kSDKDefOKButtonApplicationKey, // Button text
 CancelButtonWidget
 kCancelButton_WidgetID, // WidgetID
 kSysButtonPMRsrcId, // RsrcID
 kBindNone, // Binding
 Frame(394,234,474,254) // Frame (l,t,r,b)
 kTrue,
 kTrue, // Visible, Enabled
 kSDKDefCancelButtonApplicationKey, // Button name
 kTrue, // Change to Reset on option-click.
 WLBCmpListBox //Tree view
 kWLBCmpListBoxWidgetID, kPMRsrcID_None, // WidgetId, RsrcId
 kBindAll, // Frame binding
 Frame(299,49,475,170) // Frame
 kTrue, kTrue, // Visible, Enabled
 kTrue, // EraseBeforeDraw
 kInterfacePaletteFill, // InterfaceColor
 kHideRootNode | kDrawEndLine, // Options. Display root node
 kFalse, // Use H Scroll bar
 kTrue, // Use V scroll bar
 20, // fVScrollButtonIncrement
 20, // fVThumbScrollIncrement
 0, // fHScrollButtonIncrement
 0, // fHThumbScrollIncrement
 2, // Items selectable, 0 = No Selection, 1 = Single Selection, 2 = Multiple Selection
 kFalse, // Allow children from multiple parents to be selected
 kTrue, // Allow discontiguous selection
 //The tree view is dynamically created.
// added to support the list elements in the list box
resource LocaleIndex (kWLBCmpListElementRsrcID)
 kViewRsrcType,
 kWildFS, k_Wild, kWLBCmpListElementRsrcID + index_enUS
resource WLBCmpNodeWidget (kWLBCmpListElementRsrcID + index_enUS)
 __FILE__, __LINE__,
 kWLBCmpListParentWidgetId, kPMRsrcID_None, // WidgetId, RsrcId
 kBindLeft | kBindRight, // Frame binding
 Frame(0, 0, 194, 20), // Frame
 kTrue, kTrue, // Visible, Enabled
 "", // Panel name
 // Just a info-static text widget with about-box text view to get white bg.
 WLBCmpTextWidget
 kWLBCmpTextWidgetID, kPMRsrcID_None, // WidgetId, RsrcId
 kBindLeft | kBindRight, // Frame binding
 Frame(45,1,194,18) // Frame
 kTrue, kTrue, kAlignLeft,kEllipsizeEnd // Visible, Enabled, Ellipsize style
 "", // Initial text
 0, // Associated widget for focus
 kPaletteWindowSystemScriptFontId, // default font
 kPaletteWindowSystemScriptHiliteFontId, // for highlight state.
If you still got problems, post you email here - I'll send you the complete project/code then.
-Marc

BCP data into a file using Runtime class

Hi,
     I have a problem in using the Runtime class.
I am trying to bcp a table's data into a file.I am working on a Unix environment.
My bcp is not getting completed fully.The total records to be bcped is 1 million,but only one lakh records is getting bcped and then it hangs up..But if i issue the bcp command from my telnet session it is bcping it to the file without any problem.Can anyone help me out on how to overcome this..
Is there anything specific with Runtime class..I am pasting the code that i tried out below.
String l_s_bcpQuery="bcp mubstage.dbo.HousingUnitSampleMarket out /dun/d3nmb0/mariaps/subracheckprototype -c -t~ -Umariaps -Prykwz5ba -SD3NMB_MUB";
try{
Runtime time=Runtime.getRuntime();
Process p=time.exec(l_s_bcpQuery);
p.waitFor();
System.out.println("The exit value is:"+p.exitValue());
}catch(Exception ioe){
     ioe.printStackTrace();
     System.out.println("IOException"+ioe.getMessage());

you might need to capture the stout & sterr from the process. see http://java.sun.com/j2se/1.4.1/docs/api/java/lang/Process.html, or many other similar questions on this forum.
try this:
try{
Runtime time=Runtime.getRuntime();
Process p=time.exec(l_s_bcpQuery);
BufferedReader stout = new BufferedReader(new InputStreamReader(p.getInputStream()));
BufferedReader sterr = new BufferedReader(new InputStreamReader(p.getErrorStream()));
String out = stout.readLine();
String err = sterr.readLine();
while((out != null)||(err != null))
if(out != null)
System.out.println(out);
if(err != null)
System.err.println(err);
out = stout.readLine();
err = sterr.readLine();
int exit_value = p.waitFor();
System.out.println("The exit value is:"+ exit_value);
}catch(Exception ioe){
ioe.printStackTrace();
System.out.println("IOException"+ioe.getMessage());
}

Error while activating the data into DSO

Hi
My base DSO is used to load 4 other data targets.
In process chain, after the base DSO gets activated there are 4 DTPu2019s running to load the data from base DSO to other DSO and 3 cubes.
When loading to other DSO, We have encountered an error
Object is currently locked by BI Remote
Lock not set for : Activating data in DSO
Activation of M records terminated.
1. My question is when loading the data from base DSO to other objects , how does the lock mechanism works.
I know that we cannot load the data into base DSO, when base DSO is sending data into target.
2. What difference does it make when loading DSO to DSO and cube parallel?
Thanks
Annie

Hi Annie.....
1. My question is when loading the data from base DSO to other objects , how does the lock mechanism works.
I know that we cannot load the data into base DSO, when base DSO is sending data into target.
Do you mean to say that the loading in the 2nd level DSO was successful .....but the activation failed ?
Have you checked in SM12 that whether that 2nd level DSO is somehow locked or not ?
Is any further targets getting loaded from this 2nd level DSO ?
Look suppose u r loading a DSO A.........and in the mean time some load starts from DSO A to some other target(it may be DSO or a cube).........then the activation in the DSO A will fail........because since the last request in the DSO A is not activated....that request will not get considered in the subsequent load....and since the load is already in progress....system will not allow to activate any new request......
Another option can be that DSO A is getting loaded from some other targets as well.......so since still some load is in progress in this target....it will not allow the activation....
So check it and atart the activation again..
2. What difference does it make when loading DSO to DSO and cube parallel?
The main difference is that there is no activation concept in the cube....so a cube may get loaded from several targets in parallel......
A DSO can also get loaded in parallel.......but activation should start once all the loads get completed successfully.....
Regards,
Debjani....

Custom PL/SQL API that inserts the data into a custom interface table.

We are developing a custom Web ADI integrator for importing suppliers into Oracle.
The Web ADI interface is a custom PL/SQL API that inserts the data into a custom interface table. We have defined the content, uploader and an importer. The importer is again a custom PL/SQL API that will process the records inserted into the custom table and updates the STATUS column of the custom interface table. We want to show the status column back on the spreadsheet.
Defined the 'Document Row' import rule and added the rows that would identify the unique record.
Errored row import rule, we are using a SELECT * from custom_table where status<>'Success' and vendor_name=$param$.vendor_name
The source of this parameter is import.vendor_name
We have also defined an Error lookup.
After the above setup is completed, we invoke the create document and click on Oracle->Upload.
The records are getting imported, but the importer program is failing with An error has occurred while running an API import. The ERRORED_ROWS step 20003:ER_500141, parameter number 1 must contain the value BIND in attribute 1.'

The same issue.
Need help.
Also checked bne.log, no additional information.
<bne:document xmlns:bne="http://www.oracle.com/bne">
<bne:message bne:type="DATA" bne:text="BNE_VALID_ROW_COUNT" bne:value="11" />
<bne:message bne:type="DATA" bne:text="BNE_INVALID_ROW_COUNT" bne:value="0" />
<bne:message bne:type="ERROR" bne:text="An error has occurred while running an API import"
bne:cause="The ERRORED_ROWS step 20003:ER_500165, parameter number 1 must contain the value BIND in attribute 1."
bne:action="" bne:source="BneAPIImporter" >
<bne:context bne:collection="collection_1" />
</bne:message><bne:message bne:type="STATUS"
bne:text="No rows uploaded" bne:value="" >
<bne:context bne:collection="collection_1" /></bne:message>
<bne:message bne:type="STATUS" bne:text="0 rows were invalid" bne:value="" >
<bne:context bne:collection="collection_1" /></bne:message></bne:document>

Caller-70 Error while loading master data into infoobject

hi ,
I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
Short dump in the Warehouse
Diagnosis
The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
System Response
"Caller 70" is missing.
ST22 dump analysis is as below:
Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in
"VALUE_TO_SID_CONVERT_DB".
The main program was "RSMO1_RSM2 ".
Please help as soon as you can..Production problem....
Regards
Rakesh

Hi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj

In complete Data into substitution

Similar Messages

Maybe you are looking for