Error while activating the data into DSO

Hi
My base DSO is used to load 4 other data targets.
In process chain, after the base DSO gets activated there are 4 DTPu2019s running to load the data from base DSO to other DSO and 3 cubes.
When loading to other DSO, We have encountered an error
Object is currently locked by BI Remote
Lock not set for : Activating data in DSO
Activation of M records terminated.
1. My question is when loading the data from base DSO to other objects , how does the lock mechanism works.
I know that we cannot load the data into base DSO, when base DSO is sending data into target.
2. What difference does it make when loading DSO to DSO and cube parallel?
Thanks
Annie

Hi Annie.....
1. My question is when loading the data from base DSO to other objects , how does the lock mechanism works.
I know that we cannot load the data into base DSO, when base DSO is sending data into target.
Do you mean to say that the loading in the 2nd level DSO was successful .....but the activation failed ?
Have you checked in SM12 that whether that 2nd level DSO is somehow locked or not ?
Is any further targets getting loaded from this 2nd level DSO ?
Look suppose u r loading a DSO A.........and in the mean time some load starts from DSO A to some other target(it may be DSO or a cube).........then the activation in the DSO A will fail........because since the last request in the DSO A is not activated....that request will not get considered in the subsequent load....and since the load is already in progress....system will not allow to activate any new request......
Another option can be that DSO A is getting loaded from some other targets as well.......so since still some load is in progress in this target....it will not allow the activation....
So check it and atart the activation again..
2. What difference does it make when loading DSO to DSO and cube parallel?
The main difference is that there is no activation concept in the cube....so a cube may get loaded from several targets in parallel......
A DSO can also get loaded in parallel.......but activation should start once all the loads get completed successfully.....
Regards,
Debjani....

Similar Messages

  • Error while activating the Data in DSO

    Hello,
    We moved huge amount of FI data from datasource to DSO. After moving all the data, we tried to activate the data. But the mistake we did is we activated all the requests at one go. (my assumption) It turned all the request to Red. The job log says SQL error.
    Is there any way of solving this issue without deleting the data. Data load will take too much time and we would like to avoid it if possible.
    Waiting for inputs!!!
    Regards,
    Abhishek

    yes a Dump was triggered.
    Database error text........: "ORA-12801: error signaled in parallel query
    server P007#ORA-01652: unable to extend temp segment by 2560 in tablespace
    PSAPTEMP"
    Internal call code.........: "[RSQL/FTCH//BIC/AYEPSPFI140 ]"
    Please check the entries in the system log (Transaction SM21).
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
    "CL_RSODSO_ACTIVATE_REQUESTS===CP" or "CL_RSODSO_ACTIVATE_REQUESTS===CM00D"
    "ACTIVATE_DATA_FROM_QUEUE"
    Edited by: Abhishek Nishis on Oct 12, 2009 10:54 PM

  • BI7.0 Hexdecimal values problem while activating the data in DSO

    Hi Friends,
                     I've got the data upto PSA and i've run DTP also from PSA to DSO, but while activating the data in DSO from New Data Table to Active Data Table, it's giving the error given below:
    Error when assigning SID: Action VAL_SID_CONVERT table
      0DOC_HD_TXT     
    Value '1st disb' (hex. '00310073007400200064006900730062') of          characteristic 0DOC_HD_TXT contains invalid characters
    Process 000037 returned with errors.
                it isn't accepting the values like with numberels and chars together
    ex: 1st disb, 70 cr Gen Hsg.
                   I want the same to be in the report, how these are to be allowed?, i don't want to edit in PSA and there are a lot of values like that i can't edit all those, since there are thousands of records.
    Regards,
    BalajiReddy

    Hi Anil,
                       Thanx for your quick replay, i've allowed ',' in RSKC and i've checked the check box LOWER CASE LETTERS for IO 0DOC_HD_TXT, the problem was almost solved out. What does ',' mean by?
                          Why lower case letter has to be checked only for this IO (0DOC_HD_TXT), not for others? if it is checked, it allows only lower cases, doesn't allow upper cases i think. won't there be any problem? if it is done like that?
            pls tell me the reason, i'm really thankfull for your quick replay
    Regards,
    BalajiReddy

  • Error while writing the data into the file . can u please help in this.

    The following error i am getting while writing the data into the file.
    <bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
    <part name="code">
    <code>null</code>
    </part>
    <part name="summary">
    <summary>file:/C:/oracle/OraBPELPM_1/integration/orabpel/domains/default/tmp/
    .bpel_MainDispatchProcess_1.0.jar/IntermediateOutputFile.wsdl
    [ Write_ptt::Write(Root-Element) ] - WSIF JCA Execute of operation
    'Write' failed due to: Error in opening
    file for writing. Cannot open file:
    C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\
    BPEL_Import_with_Dynamic_Transformation\WORKDIRS\SampleImportProcess1\input for writing. ;
    nested exception is: ORABPEL-11058 Error in opening file for writing.
    Cannot open file: C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\
    BPEL_Import_with_Dynamic_Transformation
    \WORKDIRS\SampleImportProcess1\input for writing. Please ensure 1.
    Specified output Dir has write permission 2.
    Output filename has not exceeded the max chararters allowed by the
    OS and 3. Local File System has enough space
    .</summary>
    </part>
    <part name="detail">
    <detail>null</detail>
    </part>
    </bindingFault>

    Hi there,
    Have you verified the suggestions in the error message?
    Cannot open file: C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\BPEL_Import_with_Dynamic_Transformation\WORKDIRS\SampleImportProcess1\input for writing.
    Please ensure
    1. Specified output Dir has write permission
    2. Output filename has not exceeded the max chararters allowed by the OS and
    3. Local File System has enough space
    I am also curious why you are writing to a directory with the name "..\SampleImportProcess1\input" ?

  • Error While Activating the Data Source in RSA5 T-Code

    Hi,
    When i tried to inactive the data source in 2lis_11_vahdr it shows "Data Source does not exists errror".
    So i went to RSA5 T-Code and tried to activate the data source but there it is throwing the error like "Event with errors Extract in Data Source 2LIS_11_VAHDR".
    I have checked the above thing with all the data sources every one are throwing the same errors. Can any one please suggest me how to solve the issue.
    Or Is this issue related to Basis People?.
    Regards,
    Kumar.

    Hi Ravi,
    1.When i tried to inactive the data source  in  LBWE T-Code the error is "Data Source 2lis_11_vahdr does not exists ".
    2. In RSA5 T-Code  while activating the data source the error is  "Event with errors Extract in Data Source 2LIS_11_VAHDR".
    Regards,
    Kumar.

  • Error while activating the request in DSO

    Hi all,
    I had loaded the data into the DSO from another DSO.
    The load is compeleted successfully and the data came to the new data table, but when i activate the request it turns to red, giving some error that sid has changed. what may b the reason for this
    Thanx

    Hi,
    check threads
    ODS Object Activation SID changed
    Error in assigning SID and activation of ODS
    Maybe this helps.
    Regards,
    Arek

  • Error - While activation of Data in DSO

    Hi Experts,
    I'm facing following error message when tried to activate the data in DSO - The data went through fine in PSA and when triggered DTP to load data in DSO; the monitor showed green but when activated in DSO it's giving following error message. I transfered the global settings but facing the same following error message:
    Diagnosis
         An exception wrong_date was raised while executing function module
         RST_TOBJ_TO_DERIVED_TOBJ .
    System Response
         Processing the corresponding record has been terminated.
    Procedure
         To analyze the cause, set a break point in the program of the
         transformation at the call point of function module
         RST_TOBJ_TO_DERIVED_TOBJ . Simulate the data transfer process to
         investigate the cause.
    Procedure for System Administration
    Any idea that why it's generating this error message while activating data in DSO. I checked those records in error stack and seems to be a date issue but I checked the factory calendar and check the validity and that's fine and is within the factory calendar data range.
    Thanks in advance - you response will be really appreciated.

    hi,
    as you said the global settings were done,
    try the global settings once again then delete the PSA(if records were less) nd load from source and then load to target.
    this may solve if all settings were fine.
    if records were huge in PSA, try correcting the records in error stack after allowing the good records to the target.
    Ramesh

  • Error while activating the data source.

    Dear all,
    We are using the BI version 7.00 - i have a problem i.e., while creating the infopackage for the data source
    0PM_OM_OPA_2 the following error is displayed.
    "No active transfer rule for DS 0PM_OM_OPA_2 and ....source system CLNTDEV400; create first..."
    Moreover the data source is found to be in version "M" - while activating the same when in click on the display/change icon , the following error is popped up.
    "You can only edit 3.x DataSources using transfer rule
    maintenance Do you want to create the transfer rules now?"
    What could be the reason for this error. What are the things that are to be done to replicate the data and pull data?
    Valid experts comment is expected in this regard.
    Regards,
    M.M

    Hi Magesh,
    Replicate your data source in BW and then right click onit and choose Assign Info source, it may take you to BC wherein you may need to install the Transfer Rules and related info objects etc.... Once you maintain this data source in the source system then you can create an info pack withput any extra effort.
    Hope it helps..

  • Error while loading the data in DSO (Bi 7.0)

    Hi Friends,
    I am working on BI 7.0 , I had run a DTP to load the data in DSO from another DSO.but there was some error in tranformation because of which DTP request didnt terminate with either green or red . then I fixed the bug in TRX and rerun the request .Now there are two requests. Now i deliberately changed the QM Light of the earlier request to Red so that I could run another request. The other DTP success fully loaded the data in Activation Que of DSO . But when I tried to Activate the second request I got a message that request can not be activated because  earlier request is yet to be activated.
    now I tried to delete the earlier request .Neither its getting deleted nor  am I able to change the QM Light to Green .
    What should  I do to activate the Successful request to load the data in DSO.
    puzzeled !
    Anurag

    Hi,
    I have a similar situation....
    I load data from DSO 1 to DSO2....i run the DTP and look at the monitor after its green when i go to manage and activate  i am seeing  two requests instead of 1...i am not sure why...Can you guys tell me if there is any setting that needs to be taken care of.
    Thanks,
    Vinay.

  • Error While loading the data into PSA

    Hi Experts,
           I have already loaded the data into my cube. But it doesn't have values for some fields. So again i modified the data in the flat file and tried to load them into PSA. But while starting the Info Package, I got an error saying that,
    "Check Load from InfoSource    
    Created       YOKYY  on   20.02.2008   12:44:33 
    Check Load from InfoSource , Packet IP_DS_C11
    Please execute the mail for additional information.
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    Pls help me in this......
    With Regards,
    Yokesh.

    Hi,
    After editing the file did you save the file and close it.
    This error may come if your file was open at the time of request.
    Also did you check the file path settings.
    If everything is correct try saving the infopackage once and loading again.
    Thanks,
    JituK

  • Error while activating the request of DSO upload

    Hi all,
    While activating the request generated during upload to Datastore object,it ends in an erroneous activation giving the following error.
    'No SID found for value 'BBL' of characteristic 0BASE_UOM'.
    Is it because no translation exists,if so what should be done for the same.
    Thanks in advance,
    Chintu.

    hi Chintu,
    it seems unit BBL not exist in your bw system,
    you can update the unit master from r/3,
    have you performed 'transfer global setting' ?
    check in r/3 table t006a (t006*), if exist you can
    rsa1->source system->right click r/3 source system
    'transfer global setting', in next screen mark 'unit of measurement' (also currency etc) and option 'update table'.
    this update should be scheduled periodic, menu program->run in background and schedule periodic job.
    if BBL not exist in r/3, you can manualy maintain,
    transaction CUNI.
    hope this helps.

  • Error while deleting the data from DSO

    Hi Experts
    I am getting the ABAP Dumps when I am trying to delete the data from the DSO Objects in my Systems.
    "    An entry was to be entered into the table                                                    
         "\FUNCTION=RSAR_ODS_GET\DATA=L_TH_ISOSMAP" (which should have                               
        had a unique table key (UNIQUE KEY)).                                                        
        However, there already existed a line with an identical key.                                                                               
    The insert-operation could have ocurred as a result of an INSERT- or                         
        MOVE command, or in conjunction with a SELECT ... INTO.                                                                               
    The statement "INSERT INITIAL LINE ..." cannot be used to insert several                     
         initial lines into a table with a unique key.     "
    I have tried with multiple DSO's and Have the same issue. Please need your suggestions.
    Regards,
    Mahesh

    Hi......
    I think in the ODS setting Unique Data Records checkbox is ticked........if so.........The DataStore object can be used for loading unique data records...........If the loaded request does contain data that is already in the DataStore object, activation of the request will lead to an error.
    Find the request in SE16>>RSICCONT table .........and try to delete there....it may work........
    Check this.....
    u2022 Note 1007717 -Deleting from Data Store object: Termination w/o log
    u2022 Note 998704 - Deleting req from DataStore obj: Status at end of processing
    u2022 Note 1037507 - System Termination when you delete from DataStore objects
    Regards,
    Debjani.....

  • Error While Activating the CO-PA DSO

    Hi Friends
    As i am new to CO-PA . I am facing problems while activating DSO.
    Error : Short dump has not been completely stored (too big)
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "GPDI1O4GBC7CYZNYW1LK35LKP6J" had to be terminated
      because it has
    come across a statement that unfortunately cannot be executed.
    Error analysis :
        You attempted to assign a field to a typed field symbol,
        but the field does not have the required type.
    Please Suggest me
    Thanks
    Gowtham

    Hi Fathima
    Here is the screen description
    Short text
        Type conflict with ASSIGN in program "GPDI1O4GBC7CYZNYW1LK35LKP6J".
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "GPDI1O4GBC7CYZNYW1LK35LKP6J" had to be terminated
         because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        You attempted to assign a field to a typed field symbol,
        but the field does not have the required type.
    Trigger Location of Runtime Error
        Program                                 GPDI1O4GBC7CYZNYW1LK35LKP6J
        Include                                 GPDI1O4GBC7CYZNYW1LK35LKP6J
        Row                                     886
        Module type                             (METHOD)
        Module Name                             EXECUTE
    Thanks
    Gowtham

  • ERROR while uploading the data into ztable with background processing

    Hi gurus,
    i am trying to upload the data from excel file to internal table 
    its working fine ..
    but........
    if i try to upload the data with background processing , in sm37 it is saying "error during the upload of clipboard contents".
    Regards,
    Sri

    Hi,
    FM GUI_UPLOAD doesnt work in background, use dataset to upload it from application server.
    refer below code
    *--Local Variables
      DATA : l_file  TYPE string,
             l_line  TYPE string,
             l_index TYPE sy-tabix.
    *--Clear
      CLEAR : l_file.
      l_file = p_ipfile.
    *--Read the data from application server file.
      OPEN DATASET l_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
      IF sy-subrc NE 0.
    *--Error in opening file
        MESSAGE i368(00) WITH text-005.
      ENDIF.
    *--Get all the records from the specified location.
      DO.
        READ DATASET l_file INTO l_line.
        IF sy-subrc NE 0.
          EXIT.
        ELSE.
          SPLIT l_line AT cl_abap_char_utilities=>horizontal_tab
                          INTO st_ipfile-vbeln
                               st_ipfile-posnr
                               st_ipfile-edatu
                               st_ipfile-wmeng.
          APPEND st_ipfile TO it_ipfile.
        ENDIF.
      ENDDO.
    Regards,
    Prashant

  • Error while loading the data into the cube using DTP.

    No SID found for the value'UL' of characterstics 0BASE_UOM.
    Please give me the idea ,to solve the error.
    Thanks&Regards
    Syam Prasad Dasari

    https://forums.sdn.sap.com/click.jspa?searchID=23985990&messageID=6733764
    https://forums.sdn.sap.com/click.jspa?searchID=23985990&messageID=5062570

Maybe you are looking for