In dbx - should i be able to cast a variable using a template?

as in:
print *(CRef<CSeqDB>*)((*seqsrc)->DataStructure)

The short answer is yes.
There could be two problems here:
- template should already be instantiated in current scope; dbx can't create instance itself;
- dbx is not a compiler so I expect that it can't parse some complex expression.

Similar Messages

Should iMovie11 be able to import VCR tapes using Canopus ADVC-100

I think the answer is yes. However, in my case there seems to be a hiccup. The Canopus screen opens okay and import commences, as confirmed by the red light in the timer recorder and the time running up. Unfortunately, importing stops at 2 seconds with manual input selected and 1 minute with automatic selected. From the saved events, the manually imported DV file will not play because of its insufficient length and the automatically imported one plays back for the 1 minute. I have checked the settings and connections and all are okay but something is awry.
A forum search appears to say the ADVC-100 and iMovie 11 are not compatible but the fact that 1 minute of tape can be transferred successfully suggests iotherwise.
Are there any suggestions on what may be at fault ?

Bradley.Suiter wrote:
Problem Solved. It would have helped if I'd checked the Analogue/Digital Button on the front of the Canopus first. Was set to digital when I was importing analogue.
Oh, the times I have forgotten to do that!

How to be able to change a variable used by an actived method?

a JDialogBox controls the sleep time (int rate). a button listener uses this variable in thread.sleep()
Problem:
client cannot change rate while button listener is processing.
How can i change my code in order to change the sleep time instantaneously while the button is pressed??
Code:
private int rate =300; //instance variable
//JDialogBox listener
private class SpeedListener implements ActionListener
public void actionPerformed( ActionEvent event) {
if(speedBox.isSelected())
rate = 100;
else rate = 300;
//JButton listener
private class ButtonListener implements ActionListener
public void actionPerformed(ActionEvent e) {
dfs();
//dfs method calls sleep(rate) method
//sleep method
private void sleep(int delay)
try {
Thread.sleep(delay);}
catch(InterruptedException exception) {
System.err.println(exception.toString()); }
}

you need to type
currentTemp = my AC.getTemp();because your AirConditioner.getTemp() method returns an int(1 in this case). If you just call getTemp, the program will return 1 to noone who listens. If you do this:
currentTemp = getTemp();you should get an "unknown symbol" Error, because if you call a method from an object, you need to specify the object which "has" the method.
Edited by: AikmanAgain on Feb 23, 2008 11:41 AM

Should I be able to use MobileMe features if I have an iCloud account?

I recently purchased an iCloud account.
Should I be able to post a webpage using iWeb with iCLoud?
When trying to publish the page i'm asked to sign in to mobileme. I thought maybe icloud would be sufficient.

MobileMe closed over a year ago, and iCloud does not provide website hosting services. iWeb has not been updated for several years and is no longer sold or supported, so it still offers the non-functional MobileMe option.
Up to and including iWeb '08, it was only possible to publish to other hosts by 'Publishing to a folder' and then uploading that local folder to a website host using a separate FTP client. From iWeb '09 an FTP method was built-in, making it easier to publish to a host other than MobileMe.
In order to upload your existing site in iWeb '09 and above:
Click on the name of the site in the sidebar: the publishing settings pane will open. Set 'Publish to' to 'FTP'. Enter the name of the site and a contact address (if desired).
In the 'FTP Server Settings' section you will need to know the server address (your hosting service can tell you that), and your username and password for that service. Your site will be published in a folder with its name at root level of the server, with an index.html file at root level (which will overwrite any index.html file which may be there already). The 'Directory/Path' field may need to include a path such as '/webspace/' or 'ht_docs/' - this is dependent on your hosting service and they should tell you this. If you want to publish within a folder you can add that to the path.
You can then click the 'Test connection' button so that iWeb can check that it can get access to your server space. You should enter the URL of the site in the 'URL' field so that rss feeds and internal links have the correct address.
To publish using an earlier version of iWeb:
From the File menu choose 'Publish to a folder'. You should create a folder somewhere convenient specifically for this and choose it when publishing to a folder: this folder should not contain anything else.
You now need an FTP program (FTP is the 'protocol' used for uploading) to upload the contents of the folder to your server.Cyberduck is free (donation requested): Transmit is $34 but I think better. You will need the server address (your hosting service can tell you that), and your username and password for that service. You can drag the contents of your folder to your webspace, or create a folder there and drag the contents to that if you prefer.

How can I prevent a PDF file from being copied, printed or downloaded? Students should only be able to view the text and and not distribute it in any way.

How can I prevent a PDF file from being copied, printed or downloaded? Students should only be able to view the text and and not distribute it in any way.

You can prevent it from being printed by applying a security policy to it
in Acrobat. The rest can't be prevented, unless you spend a LOT of money
on DRM protection.

Should I be able to use a Lexmark Pro 205 wireless printer from my iPad 1? My iPad can't find the printer. Iveinstalled the Lexprint app on iPad and downloaded the Lexmark Listener on desktop computer. Still can't print from iPad.

Should I be able to use a Lexmark Pro 205 wireless 3 in 1 printer with iPad 1? I have installed the LexPrint app on iPad, downloaded the Lexmark Listener on desktop computer but still can't print from iPad. My iPad cannot find the printer. But I can print from desktop without USB cable. I upgraded the system on my iPad sometime ago. Suggestions??

Here is the list of AirPrint printers, and you particular printer is not on it. So that means you will need to use the Lexmark app, and print through your computer.
There is a Lexmark guy that hangs around these forums who may chime in with a response as well.
http://support.apple.com/kb/ht4356

Can't log on with administrator user by finding the message "The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on.

Hi,
Now, my Windows 2008 R2 Enterprise server are running in the domain. It have problem about some one in my team have remote my server with the user administrator while I'm remote it now. It make my session loss. I tried to remote it again but I found
the message at the log on screen about "The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on."
Now, nobody can't remote with administrator user into this server. I have check the application log. I found the error message like this.
++++++++++++++++++++++++++++
Source: Desktop Window Manager
Event ID: 9003
Detail: None The Desktop Window Manager was unable to start because a composited theme is not in use
++++++++++++++++++++++++++++
Source: Microsoft-Windows-Winsrv
Event ID:10002
Detail: The following application was terminated because it was hung: mmc.exe.
++++++++++++++++++++++++++++
Source: Microsoft-Windows-Winsrv
Event ID:10002
Detail: The following application was terminated because it was hung: javaw.exe.
++++++++++++++++++++++++++++
Source: Microsoft-Windows-Winsrv
Event ID:10002
Detail: The following application was terminated because it was hung: Explorer.exe.
++++++++++++++++++++++++++++
Source:Desktop Window Manager
Event ID:9009
Detail:The Desktop Window Manager has exited with code (0x40010004)
++++++++++++++++++++++++++++
Source:Microsoft-Windows-Winlogon
Event ID:6005
Detail:The winlogon notification subscriber <Sens> is taking long time to handle the notification event (Logoff).
++++++++++++++++++++++++++++
In addition, I can log on this server with other user but I can't log off by it's showing the message "please wait for the system Event Notification service". Normally, the problem can solve by reboot the server. But how can be solve this problem
by we do not reboot the server?

Hi,
The cause of unable to remote back to the server seems to be services hung, please try to reset session as the article below guides to see if it works:
Windows Server: Remote Desktop Error: The task you are trying to do can't be completed because Remote Desktop Services is currently busy
http://social.technet.microsoft.com/wiki/contents/articles/28636.windows-server-remote-desktop-error-the-task-you-are-trying-to-do-can-t-be-completed-because-remote-desktop-services-is-currently-busy.aspx
If the issue can always be re-produced, then I would suggest you fully patch the system.
More information for you:
The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on
https://social.technet.microsoft.com/Forums/windows/en-US/c58bfbd5-1d63-47e3-a489-6d8c8778b76b/the-task-you-are-trying-to-do-cant-be-completed-because-remote-desktop-services-is-currently-busy?forum=winserverTS
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Major heat problem. should i be able to hear the fans?

my black macbook with 1gb ram is getting very hot when i use front row to play videos at full screen. after about 30-40 mins the left corner of the macbook is so hot i can only touch it for a second or so. then without warning the video just freezes. the picture remains on the screen but looks like it's paused. i then get the spinning colour wheel. the only way to rectify is to force a power off (force quit has no effect). i have to let it cool down for a while and try again. it works fine after that until it gets hot again.
when it locks up, it is completely silent. should i be able to hear the fans working? there is no warm air being expelled from any part of the unit as far as i can tell. the case is just really hot.
i ran a little experiment by pointing a desk fan at the notebook and it played fine for five hours without problems!!! the corner of the macbook was cool to the touch.
this happens in lid closed or open modes.
anyone else have this or is it time to call applecare?
Macbook Black 1gb Ram 120gb HDD Mac OS X (10.4.7)
Macbook Black 1gb Ram 120gb HDD Mac OS X (10.4.7)

UPDATE
ok, so we have had the firmware update and guess what?
all seems ok now!!!!
coreduotemp now reports 65 degrees after playing video at full screen. much better than the 85 degrees it was hitting. now when it gets hot i can hear the fans going. i ran a terminal window and did yes > /dev/null and after only a few seconds the temp was rising to 85-87 and the fans came on really hard and brought it to 68-70. no system stall yet.
normal idle while using only safari over airport is between 41-45 degrees!!!!
i am very happy so far. lets just hope it is the cure.
many thanks for reading and replying.
Martin.

I have a Macbook Model No A1181 2.4 GHz intel core 2 Duo with 4 Gb Ram. Should I be able to instal Final Cut Pro 3.0.2 cos I'm having problems?

I have a Macbook Model No A1181 2.4 GHz intel core 2 Duo with 4 Gb Ram. Should I be able to instal Final Cut Pro 3.0.2 cos I'm having problems? As I read it My machine should be able to run the software.
Thanks in advance

You are trying to use software that is over 10 years old. As I read it, FCP 3.0.2 required 10.1 or higher at the time, but as FCP is reliant on quicktime, which has been updated many, many times, I doubt that you will ever get it to work properly.

Should i be able to see interlacing on the computer display?

I'm trying to verify if i have things set up properly.
If i'm working in a timeline that is DV NTSC and i've brought in elements from after effects and as well have moving images within FCP, should i be able to see the interlaced lines in FCP?
It looks okay on the broadcast monitor but i'm trying to figure out if interlacing on ftg/renders should be visible on the cinema display.
a simple yes, no and a sentence if you've got the time would be nice.
thanks

You can observe the presence of interlacing on a computer display only if the Canvas (or Viewer) are set to display 100% size and the video is paused. The interlacing will appear as a comb effect on moving objects. You can not observe interlacing with a computer display on running video.

Should I be able to use my Vision:M when it's docked/connected via U

I recently got a Vision:M, and when I was initially charging it using the included USB cable, it worked fine. Once I installed the software and transferred files,it stopped reacting to any key presses while connected to USB. It will receive files, but that's it (obviously, that's the main point of the USB connection - no complaints there).
My biggest concern is that while it is in this state, the image of the arrows around the USB icon in the middle of the screen stays on the whole time, but the arrows aren't moving as when a transfer is happening. The screen does dim, but I'm worried that over time, even if I only connect the device just long enough to charge it, that the image will become burned into the screen and ruin it. And I know there will be times I'll connect it to charge and forget about it for much longer, thus raising the risk of burn-in...or is burn-in not an issue with LCD?
At any rate, is this the expected behavior, or should I be able to use the VisionM when it's connected and/or should that image be visible when charging?
Thanks!

buring only happens with plasma not lcd. also thats weird.

Should i be able to replace my broken ipad in jeddha apple store?

hi apple family
i bought an ipad 2 from sydney apple store more than a year ago.it's no warranty since its been more than a year.my ipad screen has broken down after i have been Bangladesh.I have a plan to visit jeddha in the last of this month.should i be able to replace/fixup my ipad in jeddha apple store? looking for an authentic answer.
Best regards
Irfan.

It should charge independetely from the fact that it you are watching videos or not (at least mine does), eventhough it might take longer.
Are you sure the charger is ok? Mine started giving me some problems and it would charge some times and others it didn't. Therefore I thought it was the computer and not the charger (usually they just burn and death is a quick, not a process). Turns out it was some contact thing. I am sure that you established the right connection to the video watching, but maybe you just seat more confortable in the sofa and the contact is lower...?
Also, people at the apple store did not encourage me at all to buy a more powerful charger. They said it is best to use the same power it came with...

Should I be able to see networked computers in Finder?

Forgive me if this is totally obvious.
Should I be able to click on Network in Finder and see networked PCs on my LAN? I can share and transfer files from a laptop to this iMac, but I don't have the laptop with me right now. I'm trying to see a different desktop PC right now. Under Network, then Servers, I only see iMac.local.
I don't know if this is a problem or if it's just how things work...
Message was edited by: FeatherM

Hi,
Yes you should see them if they are Sharing and on the same Subnet.
If you know the IP of the other Laptop, try In finder, select Go menu>Connect to Servers..., then on the iMac, type in smb://ip.of.the.pc, like...
smb://10.0.1.5
smb://192.168.1.3
Find IP on computers...
http://www.helpdesk.umd.edu/topics/communication/ethernet/office/winxp/2882/

Should I be able to drag folders from a stack in list mode?

I'm unfamiliar with Lion and especially with stacks. Should I be able to drag doc. folders from a stack if it is in list mode? I can't seem to drag anything from the stack. The "About Stacks" help article seems to say that drag and drop should work in stacks. Is there a technique or setting that is not mentioned in the article? Thanks Bill

Not in. I'm trying to take some things out of a doc. stack and trash them.

Should I be able to see a priority change using a mutex priority ceiling

If I have a program which uses a mutex lock in solaris 9 which is set up to protect/priority ceiling of 5 and kick it off using priocntl with a priority of 11 and RT, I can look at top and see that it has priority 111. So my process is running real time. I then use a second xterm and wait till the program hits the lock portion of the code. If I do a priocntl -d pid, it is still priority 11. I know it is in the lock because there is a printf and a sleep of 20 seconds. Should I be able to see the priority go to 5? How can I prove the priority inheritance off the mutex lock is working in a test program? Thanks for any insight.

I also tried it with a priority ceiling of 50, figured out that RT priorities worked the reverse of regular priority, the higher the priority number, the higher the priority. I still however am not able to prove the priority inheritance occured. Anybody got any thoughts on how to prove it is working properly.

In dbx - should i be able to cast a variable using a template?

Similar Messages

Maybe you are looking for