In detail section Static Text should not be repeat.

hi.
i need a small Requirement.
in detail section i put one field this is coming from data base.
beside i put one static text like something.
but something static text is repeating based on record set in detail section like
something    value1
something    value2
something     value3
but i dont want to repeat something, only first line i need to put
like
something valu1
                value2
                value3
i dont want to put report section.
i need to put same line at detail section....

there's a couple of ways to do this:
a) right click on the something field and choose Format Field > go to the Common tab and then select Suppress if duplicated
b) or you may wish to go to the Insert menu, choose Group, and then choose your field that contains the something. then you can right click on the Group Header name at the left of the report designer, choose Section Expert, and then choose Underlay Sections.

Similar Messages

Static text is not appearing from the form designer

Hi,
We are using Adobe Live Cycle designer 6.0 to design print forms.
The problem we are facing is, sometimes static text element created on the Body Page of the form does not appear at all(when we open the form designer after creating the Static text element), though we can find the static text in XML Source of the form.
For example, if a text element is created with text "XYZ" on body page, it is not visible on the body page whereas the XML Source contains "XYZ" in it.
What can be the problem ?
Regards,
V Joshi.

Hi Nikhil,
I tried using static text from Standard Library and ISR library too. Still the text disappears when i activate the form.
More inputs on this will be helpful.
Also, we are using the Form Designer Version 6.0 which is in-built component of NWDS 2.0.16 installation.
Regards,
V Joshi.

Static iview - should not run query

In SAP NetWeaver 7.0 (2004s) I am trying to create an iview which does not execute the report when opened, that is it should not target the database or the OLAP cache.
When I build the document from a KM document/format MHTML I encounter a pop-up window with a tmp file extension which is not satisfactory, else if I use HTML the report is returned unformatted.
The intention is to place the Iview into a dashboard.
As expected, if I publish directly to the portal the iview executes the report by accessing the database or OLAP cache everytime.
I suppose I am after something similar to how the reporting agent worked with 3.x tools.
Does anyone know the best way to develop a static Iview.

Hi
903 and 905 are specific to company not SAP standard. Difficult for forum to comment. Why ur company is not using 103 and 105? Normally in standard SAP accounting entries happenes after 105/905. You need to check your quiry. even 103/903 updates EKBE table. You need to pick from there and calculate open PO based on that. In standard ME2M with selection parameter WE101 will do this. You can configure similar to WE101 in below config with your requirement in case if you wish to use standard report
spro>MM>purchasing>reporting>maintain purchasing list-->selection parameter
Regards
Antony

Keeping the Count in detail section

Post Author: Swapna
CA Forum: Formula
Hi Iam new to the crystal reports and here are my issue's
In my database i have 336 records and i want to keep this count in my details section and when i did the following thing its priting my count for 336 times in my details section which i do not want that i want to print the count of total records in the detail section for only once.
Under the formula fields i have written something like this
Count({Command.TRACKNUM}); This is working fine but only problem is its printing for 336 times
Second question is In My database i will be having records with different statuses like completed,prepared,incompleted so i also want to count the records with the diffrent statuses and print them in the detail section
My report should be like this
Total Samples Comppleted Samples InCompleted Samples Prepared Samples ///Will be in the page header section
336 300 18 18 //Was suppose to be in the detail section
to have a conditional count i have written some this like this in the formula field
({Command.status}="Prepared"
Count({Command.TRACKNUM}); Which does not worked
I Appreciate your help and Thanks in Advance.

Post Author: yangster
CA Forum: Formula
I think you are confused about the details. If you put that formula in the detail section it will obviously be repeated for every single row.if what you want is a page header with the details that's fine but your summary should go into a group header/footer or the report footer.You've already got the total record count which is fine.if you want a quick and simple way to evaluate completed, incomplete, prepared samples simply create 3 simple formulas and place them in the details section (you can suppress them if you wish not to view them)@completedif status = "prepared" then 1 else 0@incompleteif statues = "incomplete" then 1 else 0@pepared_sampleif status = "prepared" then 1 else 0simply insert summary's for each of the above formulas and you will have your desired results

Displaying Array values in Details section

Hi All,
I am having trouble with Arrays in Crystal Reports.
I have made a Shared string array in my main report and am using the same in a sub report. In the sub report I need to print the values in the array one below another like a table.
Say the array MyArray has values (INDIA, USA, CHINA, JAPAN, UK)
Right now I have made a formula in which I iterate through each of them and use Join(MyArray[i], ChrW(10))
ChrW(10) as you might know is used to make a new line. So the formula output essentially looks like the way I want it, that is
INDIA
USA
CHINA
JAPAN
UK
But its still a formula and acts like a single cell. If I export it into Excel, all the values will come in single cell. Moreover, When I use it like this, I cannot do proper formatting on it either.
Is there any way to make Array behave like a table and use the same in Detail section. I do not want to hit the DB again for this purpose.
Thanks

Hi Antony,
The only way to display the values on the Detail section is to 'get those values from the database'.
Instead of using a shared array variable, use a comma separated string. Here's what you need to do:
1) In the Main Report, open your existing shared variable formula and add a new variable:
shared stringvar array <exisiting variable name>;
stringvar new_variable;
existing code line 1
existing code line 2
existing code line 3
new_variable = Join(array_variable_name, ",");
2) Right-click the Subreport > Select change Subreport Links > Move the above formula to the pane on the right > Uncheck the option at the bottom right that says 'Select data in Subreport based on field'.
3) Get into the Subreport and use this as the Record Selection Formula:
{database_field} IN Split({@Pm-formula_name}, ",") //Replace {@Pm-formula_name} with the parameter name that is automatically created in the Subreport.
-Abhilash

Unable to specify height of details section

I am creating a report that will ultimately be printed on pre-printed statements with two columns. So, I first set my details section to print with multiple columns in the Section Expert. However, I would also like to specify the height of the details section so it does not run into the other data on the page. But, when I go to the Layout Tab in the Section Expert, the height section is greyed out, thus not allowing me to specify the height of my details section.

Try this option
Right click on group footer (on grayed area) go to section expert and check the option Print at the bottom of the page which prints the group at the bottom of the page to exclude printing other groups data in the page.
You can also try the option New page After for group header section that prints each group data in a seperate page.
Hope this helps!
Raghavendra

Cheque no should not repeat in outgoing payments

hi experts
In an Out going payments same cheque should not be repeated so i need sp on this
like for example
Doc no 1 with cheque no 1234 i have added
Doc no 2 with cheque no 1234 should not get added
Regards
Jenny

Hi,
Please check this
if (@object_type='46' and (@transaction_type='A' or @transaction_type='U'))
begin
if (Select COUNT(T1.[CheckNum]) From OVPM T0 INNER JOIN VPM1 T1 ON T0.DocEntry=T1.DocNum
Where T1.CheckNum in ( Select Max(B.[CheckNum]) From OVPM A INNER JOIN VPM1 B ON A.DocEntry=B.DocNum
Where A.DocEntry=@list_of_cols_val_tab_del))>1
begin
Set @error='4601'
Set @error_message='Please check the Cheque Number'
goto ExitLine
end
end
Thanks,
Nithi

Attachments/Pictures not loading in messages (details section) post iOS 8.0.2

I have an iPhone 5 - after downloading 8.0.1 I discovered the new "Details" section of messages that showed all of your pictures/videos in a message thread as "Attachments", grouped in a grid style. However, after my update to 8.0.2 some of the attachments do not load. There is no way to click on the pictures/attachments to "download" them. When you click on the impacted attachments it will simply show a message such as "IMG_3645.jpg" for example. There doesn't seem to be any rhyme or reason as to which images do/don't load.
I have checked and confirmed I have available storage left
I have done a hard re-boot (with the power/home button simultaneously
I haven't seen any other instances (in forums, etc..) regarding this issue.
Any help/suggestions would be appreciated.

**** the Apple,ios8.0.2 makes iPhone 5s useless,according to Apple if u want to downgrade to iOS 7.1.2,u should throw your mobile out and buy a new iPhone 5s from Apple Store and you could install stable iOS 7.1.2..... Stupid people with no brain....try to hire some developers from android they will do the rest,,,,I was with android before,I have not had this type of inability even single time.....even if firmware is completely buggy and useless,we must use that firmware as no other options are there.....what a stupid policy is this?.......my iPhone 5s is completely useless with iOS 8.0.2 now. Could I return my iPhone to Apple Store? Idiots....

Group By and Detail section should be at same page

Hi
I am developing a Crystal Report in Visual Studio 2005. My report have one Group Section and two detail ( detail a, detail b) sections. In group section I am displaying Test Categories and in Detail Section (detail a) I am displaying Test Result for particular Test Categories, in detail (detail b) section I am conditionally displaying a sub report against a particular testid from detail (a) section.
I want to display all test results against a test category on the same page. If this fit on the page it should display otherwise category name and all its test should be display on next page.
Thanks in advance

Qasim not sure if you have tried this already,
right click on the group (that blue bar) and click Change Group-->Options->Keep Group together.
This will keep them together and if it exceeds one page it will start from the new one.
Hope this helps
Regards
Jehanzeb

Detail sections not displayed with Crystal Reports 2010 Runtime (SP1 also)

I have migrated a VB app from RDC 9 to Crystal Reports 2010 and I'm experiencing a very strange issue.
In a report with 6 nested groups, the detail part is splitted in 7 section, and the whole detail has the "keep together" flag activated. At runtime, some detail sections are not displayed. There is no suppress condition on the detail section. The missed sections are those near bottom of the page. I suppose that when there is no room to print the section on the page and it should go on the next page, Crystal forget to display it.
I exported the report in Crystal format and reopened with Crystal Reports designer and the missed section are displayed.
The same report is displayed correctly using RDC 9.
If I show the group tree and select the missed section group, the section is correctly displayed on a separate preview page.
I've some screenshot to better demonstrate the problem.
I hoped SP1 will resolve the issue but unfortunately it didn't.
Pier Alberto Guidotti

This issue has been escalated for a fix. tracking number is TE5000325237. For anyone wanting to attach to this thread with a similar issue, please note the behavior as decribed in the TE below. If the description does not match your issue exactly, please create a new thread.
Description - Steps to Reproduce;
1) Run the report in the CR 2008 designer - note the second page
2) Run the report in VS2010 app using CRVS2010 SP1:
CrystalReportViewer1.ReportSource = <path to report>
3) Look at page 2 and compare to page 2 from the CR2008 designer (also, see attached compare.jpg file which is a screen shot of both views) - note missing group on page 2
4) Export to PDF, DO, RTF - same issue
5) Print to printer using the viewer print button - same issue
6) Same issue print to printer using code:
Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
crReportDocument.Load("C:\Crystal\Test\Forum tests\Alberto missing detail section\Crystal Issue\Distinta di Taglio CR 2010.rpt")
crReportDocument.PrintToPrinter(1, 1, 1, 2)
        MsgBox("Done")
7) Same issue print to printer using code:
Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
crReportDocument.Load("C:\Crystal\Test\Forum tests\Alberto missing detail section\Crystal Issue\Distinta di Taglio CR 2010.rpt")
Dim rcd As ISCDReportClientDocument
        rcd = crReportDocument.ReportClientDocument
        rcd.PrintOutputController.PrintReport()
        MsgBox("Done")
8) Export to RPT file format - view this export in the CR2008 Designer - report looks as it should
9) Add report to the .NET2010 project. trying to view the repor tin the .NET2010 IDE results in .NET crashing.
- Ludek

Branding and static text in detail nav.

I have a requirement to add some static text at the bottom of the detailed navigation in the portal. I accomplished this by creating a static HTML page in KM, creating an iView that points to that document, and assigning that iView to the Detailed Navigation of my page. The problem is, the role that contains this will be widely assigned across the company, which means it will fall under several different brands. No single background color of the static HTML would look good across all brands, so I'm not sure what to do.
First of all, is this the proper way to get the text there? Secondly, what do I need to do to solve the branding issue?

Hi Kevin,
You can use dynamic navigation iviews for the purpose.
Create an iview with the text you want to display below detailed navigation.
Then add this iview to dynamic navigation area of the page.
(For Assigning Dynamic Navigation iViews check the below link)
Now when that page is shown in the portal,the associated dynamic navigation iview content
(i.e, ur static text)will be seen in the navigation panel(below detailed navigation).
Hope it is clear.For more info check this link
http://help.sap.com/saphelp_nw04/helpdata/en/32/66c53e5ae84d3be10000000a11405a/frameset.htm
Regards,
Santhosh

Font not embedded in static text fields...

I think the title says it all. I'm building website and I've come half way now just to notice that my clients cant see my font that supposed to be there. What I've learned so far is that in static text fields, flash should embed it itself since I can't reference to it + embedFonts property not working, how can I fix this problem? Anyone had anything similar? What are common mistakes? I'm pretty new at all of this...
Thanks

thx for answers...
Font Name                 Bytes        Characters
Klavika-Regular                4555     ,-./0123789:@BCKNPVZabdefghijklmnoprstuvy
NeoTech                        6738     ,.ACDEFIKLMNOPRSTUVZabcdefghijlmnopqrstuv
there they are...
FLASH CS4
font: NeoTech
url: http://www.centar-bundek.hr/test/

12.1.3 BI Publisher report not displaying the detail section on first page

Hi,
As part of our R12.1.3 upgrade, I designed a Purchase Report as a RTF template.
Header and footer sections generate fine, but for some reason the detail (text body of the RTF template) does not display on the first page but starts on the second page (this is a PO with many lines). I am using MS Word table to display the detail section.
Is there something I can check?
Thanks,
Sinan

can you send me your template and xml . i can check at my side .
email:[email protected]
there may be some spaces in the beginning .

I have recieved an e-mail seemingly from Apple that has gone straight into my spam. It says that someone has used my Apple ID to sign into iClous on an iPhone 4. There is a lionk to follow to check my details. I am assuming that I should not so this?

I have recieved an e-mail seemingly from Apple that has gone straight into my spam. It says that someone has used my Apple ID to sign into iClous on an iPhone 4. There is a lionk to follow to check my details. I am assuming that I should not so this?

You can forward the email to Apple at the link below.
[email protected]
Also check out the article below.
http://support.apple.com/kb/ht2075

At bottom of the page Report section Text is not adjusting.

hi.
i am having one problem.
ie.
i put one report section at under detail section of main report
in report section again i put sub report in sub report at details section i put one field data is comming from the data base.
this sub report field is having some data how much of data no body does not know.
my problem is that.
exactly this sub report is comming at first page page footer..
plz have a look on below image..
it is comming good at new page..
what i need is some data has to occupy at first page based upon page space
remaining will come into next page.
Any solutions... plz update me..

This is my file..
http://www.megafileupload.com/en/file/550536/WtcLayout-update---Copy1-txt.html
one more link
http://www.megafileupload.com/en/file/550537/WtcLayout-update---Copy-rpt.html
plz have a look on update me what is wrong in my report..

In detail section Static Text should not be repeat.

Similar Messages

Maybe you are looking for